How to update only Raw material cost(CK11n) in Material Master ?

Hi Everybody,
My client has a requirement where only raw material costs from the BOM should get updated in Material Master (Accounting 1 view in Standard Price field).
But in Receipe & BOM for the Process Order, the client wants all Packing Materials and activites to be maintained.
Pls help me in this regards,
Ankita

Hi Jagdish,
Let me put it this way to explain you my problem.
When running CK11n,
Total Cost is =
Total Raw Materials used Cost = QTY from BOM * Price from Material Master
+
Total Packing Materials used Cost = QTY from BOM * Price from Material Master
+
Total Utility cost = Qty from receipe * price in KP26
When viewing the cost componenet view in CK11n tcode, I can view the break up as follows
Raw Material Cost = XX rs
Packing Material Cost = XX rs
Overheads = XX rs
Total cost = sum of all above XX rs ( this is the cost which gets updated when realasing price thru t code CK40n)
But my client wants that at time of price relase, system should relase only total raw materil cost as standard price for the Finished Good in Material Master Accounting 1 view.
I hope now you are getting me.
Regards,
Ankita

Similar Messages

IB:How to update a serial Number which has Inventory Material Transactions?

Dear friends
first of all thanks for your time and valuable solutions
Install base: How to update a serial Number which has Inventory Material Transactions
problem description:
Install base > quick search
Here is Installbase record, when I query from quick search
Rec#     Item          Item Instance           Serial Number          Status
1     300-7000-01      3000000           1000XXX-0538JQ0003 Return for Adv Exchange
2     300-7000-01     8000000               1000XXX-0538JQ0003-     Return for Adv Exchange
3     300-7000-01     5000000               1000XXX-0538JQ0003-A     Return for Adv Exchange
looking above data, first and third records are the legitimate serial numbers(correct according to the client specs), second record is not legitimate since it has a dash as suffix, we found there are many illegitimate serial Numbers exists, needs to be updated with the right serial Numbers which I analyzed in excel after pulling data from mtl_material_transactions , oe_order_lines_all , mtl_serial_numbers , mtl_system_items_b
basically these are all RMAs
I need to update the second record as 1094SUZ-0538JQ0003-B as per the guidelines, while updating I need to keep all the existing contracts, Warranty, what ever material transations it has, need to be same.
we have a package updating the serial numbers using IB API (csi_Item_Instance_Pub.update_item_instance) but it is updating only the records which has no serial numbers present for that instance, if there is a serial number already exists it is not working.
user define error msg "Serial Number 1094SUZ-0538JQ0003- has Inventory Material Transactions. This serial number cannot be used to update an existing Item Instance", but I need to update this anyway!! or am I missing something here, please advice me
below post looks like similar issue, talks about hard update, I have no clue, by doing that the updated serial number will have same transations, contracts, dates....attached to it like the previous serial number
IB UPDATE_ITEM_INSTANCE ERROR - doesn't allow ACTIVE_START_DATE to change
would be great If you guys help me out, really appreciated!!
unfortunately I couldn't find any solutoin in metalink for the existing serial number update
code for updating the serial number using IB API
          x_msg_count := 0;
x_msg_data := '';
p_instance_rec.instance_id := rec.child_instance_id;
p_instance_rec.serial_number := rec.child_serial_number;
p_instance_rec.object_version_number := rec.child_object_number;
p_txn_rec.transaction_id := Fnd_Api.g_miss_num;
p_txn_rec.transaction_date := SYSDATE;
p_txn_rec.source_transaction_date := SYSDATE;
p_txn_rec.transaction_type_id := 1;
csi_Item_Instance_Pub.update_item_instance
p_api_version => 1.0,
p_commit => Fnd_Api.g_false,
p_init_msg_list => Fnd_Api.g_false,
p_validation_level => 1,
p_instance_rec => p_instance_rec,
p_ext_attrib_values_tbl => p_ext_attrib_values_tbl,
p_party_tbl => p_party_tbl,
p_account_tbl => p_account_tbl,
p_pricing_attrib_tbl => p_pricing_attrib_tbl,
p_org_assignments_tbl => p_org_assignments_tbl,
p_asset_assignment_tbl => p_asset_assignment_tbl,
p_txn_rec => p_txn_rec,
x_instance_id_lst => x_instance_id_lst,
x_return_status => x_return_status,
x_msg_count => x_msg_count,
x_msg_data => x_msg_data
Thanks
Suri

Suri
Used this. May not be perfect but should get you there. Only if the table is registered (all the seeded tables should be registered) this will work.
select distinct a.table_name,b.column_name from fnd_tables a, fnd_columns b
where a.table_id=b.table_id
and upper(b.column_name) like '%SERIAL%'
Also this is very old one but if you need history for this change add the history insert logic as well..
DECLARE
l_return_err VARCHAR2 (80);
PROCEDURE debug (p_message IN VARCHAR2)
IS
BEGIN
dbms_output.put_line (SUBSTR (p_message, 1, 255));
END debug;
BEGIN
debug('======================================================================');
debug('Switching from serial number XDT07406. to XDT07406 ');
debug('======================================================================');
UPDATE fa_additions_b
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in fa_additions_b updated :'||sql%rowcount);
UPDATE fa_mass_additions
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in fa_mass_additions updated :'||sql%rowcount);
UPDATE rcv_serial_transactions
SET serial_num = 'XDT07406'
WHERE serial_num = 'XDT07406.';
debug('No of rows in rcv_serial_transactions updated :'||sql%rowcount);
UPDATE mtl_serial_numbers
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in mtl_serial_numbers updated :'||sql%rowcount);
UPDATE mtl_unit_transactions
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in mtl_unit_transactions updated :'||sql%rowcount);
UPDATE csi_item_instances_h
SET new_serial_number = 'XDT07406'
WHERE new_serial_number = 'XDT07406.';
debug('No of rows in csi_item_instances_h updated :'||sql%rowcount);
UPDATE csi_t_txn_line_details
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in csi_t_txn_line_details updated :'||sql%rowcount);
UPDATE csi_item_instances
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in csi_item_instances updated :'||sql%rowcount);
UPDATE wsh_delivery_details
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in wsh_delivery_details updated :'||sql%rowcount);
debug('======================================================================');
debug('Switching from serial number jct20591 to JCT20591 ');
debug('======================================================================');
UPDATE fa_additions_b
SET serial_number = 'JCT20591'
WHERE serial_number = 'jct20591';
debug('No of rows in fa_additions_b updated :'||sql%rowcount);
UPDATE fa_mass_additions
SET serial_number = 'JCT20591'
WHERE serial_number = 'jct20591';
debug('No of rows in fa_mass_additions updated :'||sql%rowcount);
UPDATE rcv_serial_transactions
SET serial_num = 'JCT20591'
WHERE serial_num = 'jct20591';
debug('No of rows in rcv_serial_transactions updated :'||sql%rowcount);
UPDATE mtl_serial_numbers
SET serial_number = 'JCT20591'
WHERE serial_number = 'jct20591';
debug('No of rows in mtl_serial_numbers updated :'||sql%rowcount);
UPDATE mtl_unit_transactions
SET serial_number = 'JCT20591'
WHERE serial_number = 'jct20591';
debug('No of rows in mtl_unit_transactions updated :'||sql%rowcount);
UPDATE csi_item_instances_h
SET new_serial_number = 'JCT20591'
WHERE new_serial_number = 'jct20591';
debug('No of rows in csi_item_instances_h updated :'||sql%rowcount);
UPDATE csi_t_txn_line_details
SET serial_number = 'JCT20591'
WHERE serial_number = 'jct20591';
debug('No of rows in csi_t_txn_line_details updated :'||sql%rowcount);
UPDATE csi_item_instances
SET serial_number = 'JCT20591'
WHERE serial_number = 'jct20591';
debug('No of rows in csi_item_instances updated :'||sql%rowcount);
COMMIT;
EXCEPTION
WHEN OTHERS
THEN
l_return_err :='Updating in one of the script has this error:'|| substrb(sqlerrm, 1, 55);
debug('Value of l_return_err='||l_return_err);
END;
Thanks
Nagamohan

How to Update Camera Raw 5.0 to Camera Raw 5.6 for Photoshop CS4

How to Update Camera Raw 5.o to Camera Raw 5.6 for Photoshop CS4?
I can access the the download button but after I depress it
I need specific step by step instructions from start to finish
Morty
[email protected]

It would help us if you told us what operating system and version you are using.
generic instructions
Windows
1. Right click on the downloaded Camera_Raw_5_7_updater.zip
    Click on Extract All
2. In the Extract All dialog check Show extracted files when complete, then click on Extract
3. When the next window opens showing the extracted files, right click on the Setup.exe and click on Run as Administrator.
   In the User Account Control dialog click Yes
Just follow the directions in the install dialog when it opens
Mac
1. Double click on the downloaded Camera_Raw_5_updater.dmg to mount the dmg image
2. When the next window opens, double click on the Setup.app
    In the next window enter your password
Just follow the instructions in the install dialog that appears
I didn't take screenshots of the installer dialogs, because i already have the 5.7 camera raw plugin installed

How can update camera raw 8.6 ?

Lightroom 5.6 needs Camera Raw 5.6 for a full compability.
How can update camera raw 8.6?
Thanks!

Hi Mierteran,
Please follow the link: Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.6 to download Update Camera Raw 8.6.
Let me know if its works or not.
Thanks,
Ratandeep Arora

How to boot only one group in remote machine from master machine

Hi,
I want to know the command to boot entire remote machine from master machine and how to boot only one group for remote machine from master machine.
Thanks
Amit

You can boot the entire remote machine (after booting the Master machine) as follows:
tmboot -B <lmid of remote machine> -l <lmid of remote machine>.
For all the available tmboot options see http://download.oracle.com/docs/cd/E18050_01/tuxedo/docs11gr1/rfcm/rfcmd.html#wp1032112
Regards,
Malcolm.

How to add the purchasing overhead costs to the material costs

Hi,
I have a requirement to add the purchasing overhead costs like transportation costs to the material costs so that the costs is added to the material costs and update my material price accordingly.
Can u tell me how to do it for both standard price and MAP price?

Hi,
Please attach a accrual key in customization (Pricing procedure) to the overhead condition type you use.

I can't figure out how to update camera raw. Elements won't read my ARW. files.

Help? haha Elements won't read my ARW. files. It says to update camera raw but I don't know how.

What camera model do you have? What version of Elements are you using (Help / About Photoshop Elements) and what version of Camera Raw are you using in Elements, now (Help / About Plug-in / Camera Raw)?
These questions are relevant because each camera model must be supported individually and Adobe only adds support to currently available products.

Exit for Material Costing CK11N

Hello Experts ,
I used Function exit EXIT_SAPLCK21_002 for material costing for CK11N .
Its giving wrong value in valuation and effected in wrong Cost element or GL .
please suggest me which parameter shoul i used to get correct value and affected in
correct GL .
Becuase when i enter fixed value opf EXP_PRICE_COMPONENTS_TABLE then five different value and wittout this then different .
Thanks
Gaurav sharma

Hello ,
How can get Material no which we enter on intial screen of CK11N in Exit EXIT_SAPLCK21_002 ?
Is there any enhancement for that ?
Thanks & Regards
Gaurav Sharma

Abap - how to get only 1 PO# from an specific material

What I meant was : how to group same PO#s and show in the report that it is only one.
Suppose I have:
material#1            PO#1
                      PO#2
                      PO#3
                      PO#3
                      PO#3
                      PO#3
material#2            PO#4
                      PO#5
Now, I want to get:
material#1            PO#1
                      PO#2
                      PO#3 (total of all PO#3s)
material#2            PO#4
                      PO#5
Any ideas?
Thanks folks,
Ol Pom.
Message was edited by: Ol Pom

U can use COLLECT statement to get the required.
<b>Loop at itab.
move itab-matnr to isum-matnr.
move itab-po to isum-po.
collect isum.
endloop.
isum has your required data and you can print that
loop at isum.
write : / isum-matnr, isum-po.
endloop.</b>
isum definition
begin of isum occurs 100,
matnr like mara-matnr,
po like ekpo-ebeln,
end of isum.
Message was edited by: Anurag Bankley
Message was edited by: Anurag Bankley

How to import only RAW files from camera?

I also shoot with both RAW and JPEG, such that I have access to JPEGs to share with people immediately before post-processing. But I only want to use RAW in my Lightroom flow.
When pictures are already in Lightroom, I use filters in the library view to show only RAW, or only JPEG, or both (by applying a filter on the file extension).
But how do I set a filter before importing? I would like to import only the RAW pictures into lightroom, but I don't see a way of doing that using Lightroom's import from camera card features. I either have to let lightroom import all, and then remove the JPEGs, or use Windows explorer to copy over just RAW files and then use Lightroom to import.
I would like to use Lightroom in just one step to import all RAW files (but only RAW files) from the camera card directly to the library. A file filter in the import dialog seems like an easy feature to implement.

Another reason to have a filter in import is then you can then apply a preset to the RAW files only. At present if I want to apply a preset to my RAW files on import I have to apply it to the JPEGs too as there is no way of being selective on import. I then have to remove the preset from the JPEGs, which is a pointless and unnecessary task, whilst LR is busy rendering the unwanted look.
I shoot both file types on one cameras as the JPEG gives me a look that is very hard to replicate with the RAW files and on another camera I use a picture style to remind me of what I was looking for when shooting. Again as it's a custom style it's very hard to replicate the look in LR from the RAW file.
Though a major reason I shoot both JPEGs + RAW is that I was asked by a client a few years back, when I only shot RAW for all the shots as JPEGs to select down from. As this was a 4 week feature film shoot it took several days constant rendering out of Photoshop to output the JPEGs. This was just before LR and even then, LR would still take considerable time to produce all those exported files, though a lot quicker than PS I would hope. So now I always shoot JPEGs as well so I never have to waste time outputting JPEGs for a client to do a rough select.

How to update camara Raw?

I have Photoshop CS6 installed. I want to use my new camara Canon 6D , and I can`t open the raw files: How do I update camara raw?

Click Help > Updates...

Settings how to capture only raw images

can I set up my 5D2 to only take raw images --- presently I get a file with captured images in RAW and jpeg is this normal?

You should get only a single file recorded on the memory card. That file should have a .CR2 extension (thats the RAW).
On the rear LCD status display, in the lower left corner (just above the battery level indicator), is a box which should indicate if you are shooting RAW, RAW+JPEG, or JPEG. It wont actually display the word "JPEG" but will have a symbol indicate the compression and size of the JPEG (e.g. fine curved quarter oval with an "L" next to mean means low-compression high resolution JPEG.)
If your camera is set up to shoot only in RAW then you will see the word "RAW" displayed with absolutely nothing else in that box.
When you go into the menu system, navigate to the left-most icon along the top (the first red-camera icon all the way to the left). The top choice on that page says "Quality". PIcking that will let you choose the mode (RAW vs. JPEG, etc.)
When you are in that menu, the front control wheel (by the shutter button) selects if you want the camera to save RAW and which RAW mode. The larger rear control dial (right of the LCD screen) selects if you want the camera to save JPEG and which JPEG mode to use.
To pick only RAW with no JPEG, use the front wheel to select "RAW" (I never use SRAW1 or SRAW2) and use the rear dial to set the JEPG selection to "-" (which means no JPEG will be saved.)
The RAW image will have an embedded preview image within (which is in JPEG format) but that's a small, low-res preview (thumbnail size) and not a full size image. Also it is not a separate file.
Tim Campbell
5D II, 5D III, 60Da

How to update Camera Raw?

I have Bridge CS5 v4.1.0.54 (on a PC) and can't figure out how to view or update what version of Raw I have. I am trying to view images show with a D610 and a D810 and get the error message that my current version of Raw does not support these files, yet I feel super stupid - I can't find any way to update this. Although I know how to open files in RAW from bridge, I can't find it as an independent program on my computer, and can't find anywhere that I can open up the Raw "About" or "Update" menus. I've been to the Adobe Raw info page (Photoshop Help | Camera Raw) which tells lots about it but doesn't offer an update. I've been to the Update page (Adobe - Adobe Camera Raw and DNG Converter : For Windows), but the last update available is Raw 7.1 when I know that it's an 8-something version that I need to read D610 and D810 files. (although the Raw page lists DNG Converter updates also, I'm already on the most current 8.6.0.254 version and that's not made a difference)
What am I missing? How can I update to the current version of Raw? This is so frustrating, any assistance would be much appreciated.

You can't...
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications

How to import only RAW images from folder with RAW & JPEGs?

My system is set up that I have both RAW & JPEGs in the same folder since I shoot JPEG+RAW. How can I import just the raw images without also sucking in the jpegs? There is no way to distinguish the difference in the Import box and also no way to easily separate the the two in the Import box. I've tried using the List View and separting them by File Size, but Aperture has a stupid bug here and it tells me that the JPEG file sizes are in the teens (like 17-18 megs) and they are still hard to separate from the RAW which are about the same size.
Why can't Aperture do this basic thing?

I'm not doing anything. What I wrote in my workflow example above is exactly what I'm doing. I've been trying some experiments to see if it was "A Better Finder Rename" that is causing the issue. So far, no go. I have taken just a couple of JPGs only and pointed Aperture's Import to the folder that contains them. Aperture is reading that there are only 2 jpegs (which is what there is) and their file size is right on the mark.
Ok. I just narrowed it down to something. The flaw is showing up after the RAW files are converted to DNGs. The JPEGs do not show up in the Import box when there are camera raw files like NEFs or CR2s and the corresponding JPEGs. That is Aperture's normal behaviour. But, and this is a big BUT, when the raw files are converted to DNGs and they are in the same folder as the corresponding JPEGs, that's when Aperture pulls its shenanigans. It has something to do with the JPEGs and DNGs having the same name. Even though the files have different extensions, Aperture is doing something to the file size of the JPEGs that make them seem that they are much larger files than they actually are.
I figured it out like this:
I had 2 CR2 files and the corresponding JPEGs in a folder. Pointing Aperture's Import to that folder, Aperture did what it is supposed to do; it saw only 2 raw files (doesn't matter that the G9 CR2 files are not supported yet). So, I renamed all the files using A Better Finder Rename and Aperture still only saw 2 raw files.
So far so good.
Then, I converted just the 2 CR2 files to DNG and kept them in the same folder. Aperture saw 2 DNGs and 2 CR2 files. No jpegs were seen. Business as usual. Then I removed the CR2s and renamed the jpegs so they had the same names as the DNGs (except for of course different extensions) and that's when Aperture saw the jpegs as separate files and saw them with bogus file sizes.
So I tested that by altering the jpeg names so that they were different from their corresponding DNGs and Aperture went back to seeing the jpegs with the correct file sizes.
Therefore, Aperture is having some difficulty with two separate files, one JPEG and the other DNG, when they both have the same name (different extensions, of course).
Try it if you have a moment. Take one raw file and convert it to DNG and place it in a folder with its corresponding jpeg. Rename both to the same name and different extensions (.dng + .jpg) and see what happens when you try to get Aperture to import. Chance are Aperture will show bogus file sizes for the jpeg.
Let me know if that's clear.
Antonio

How to update Camera Raw in LR

Hi
I have Version 2.1 of LR running but it shows the version of Camera Raw as 4.6 How can I get LR to use version 5.1 of Camera Raw?
Many thanks for any help.
David

http://www.adobeforums.com/webx/.59b6d50a

How to update only Raw material cost(CK11n) in Material Master ?

Similar Messages

Maybe you are looking for