How to update os for storm 9550

Hi,
will any be able to help me out with the procedure to update my b storm9550.
I'm now living in India and do not have Verizon connection any longer...
And I'm using airtel bb services

Try the steps at this link:
http://us.blackberry.com/support/installpc.jsp
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

Similar Messages

How to update apps for my iPOD

How to update apps for my iPOD

On the iPod go to App store app and tap Updates in lower right. Then tap on Update all or update individual ones.
Note that if yo do not have iOS 6, you may not be able to update the the latest version of some apps since some require iOS 4.3 or higher. some iOS 5 or higher or some iOS 6.

How to update firmware for SSD Toshiba Air 2012

How to update firmware for SSD Toshiba THNSNS128GMFP ??
My disk see on system as SandForse 200026BB 33Kb

https://discussions.apple.com/message/22108992#22108992
https://discussions.apple.com/thread/5120950?start=0&tstart=0
https://discussions.apple.com/message/22649139#22649139
https://discussions.apple.com/thread/5300125?tstart=0
Seems to be a real issue. Here's to hoping Apple will address this issue sooner rather than later.

HT4623 Hi, I need help on how to update software for my ipad1, can someone help me?

Hi, I need help on how to update software for my ipad1, can someone help me?

The iPad 1 can not be upgraded beyond 5.1.1. If you haven't upgraded to iOS 5.1.1, see the info below.
If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848

How to update firmware for HP Compaq DC small form factor

I have HP Compaq dc7700 small form factor, Windows xp pro. It was bought on ebay and works fine except for one thing. The Bios was upgraded but the firmware is not upgrading. the Bios was upgraded to V3.05 but the firmware remains 2.04
I downloaded al the updates and firmware and followed instructions but I seem to have problems updating the firmware. I would like to know how to do this step by step because the instructions I read seems to be missing some steps. my question is how to update the firmware. I did read the instructions but could not get it updated. either updating via windows or in dos, I can't seem to make it successful. There are two error messages,
1. ME BIOS Extension module has halted. Update BIOS or Management Engine firmware if problem persists.
2. Amt mamagement engine is disabled.

HP normally uses the term BIOS to refer to motherboard/CPU "firmware" updates and Firmware to refer to other device "firmware" updates... Below is a list of the two classes of firmware;
BIOS
Business Desktops BIOS Utilities 4.02 Rev. A
Microcode Update for HP 786E BIOS Family Computers with Intel Processors 1.06 Rev. A
HP Compaq Business Desktop ME Firmware Update and Utilities 2.2.30.1046 Rev. A
HP Compaq dc7700p Business Desktop System BIOS for Intel vPro Technology (786E1 BIOS) 3.05 Rev. A
HP Compaq Business Desktop System BIOS (786E1 BIOS) 1.15 Rev. A
Firmware
Western Digital 7200-rpm Hard Drive Firmware Update 3.03E03 Rev. A
Intel PRO/1000 Firmware 1.10 Rev. A
HP Optical Drive (TSST H353B DVD-ROM) Firmware Update BC08 Rev. A
HP Optical Drive (TSST H653N DVD-RW) Firmware Update HB02 Rev. A
Seagate Hard Drive Firmware Upgrade for 500-GB Barracuda 7200.11 HP13 Rev. A
ATI X1600XT Graphics Card Video BIOS Update S3A67124.104 Rev. A
Samsung Hard Drive Firmware Upgrade - SATA Drives 42_51 Rev. A
Please identify the exact device you wish to upgrade/update the firmware to.
Frank
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

HT1766 how to update software for 4.2ios

how to update iPhone of lower versions as 4.2.1 (8c148)

Hi Irene,
You have to hook your phone up to the computer you normally sync with in order to upgrade any IOS below 5.0....Once you have hooked it up, and selected the device, you can then check for updates. If your phone can be updated to a higher level than 4.2.1, then iTunes will let you know, and you can then initiate the update process.
Cheers,
GB

How to update drivers for Lenovo IdeaCentre C560?

Hi all,
I have PC Lenovo IdeaCentre C560 with Windows 8.1.
There is installed LSC (Lenovo Solution Centre), which has "System" section and inside it is "Lenovo software update" block, where LSC advices me "Go to Lenovo's website to update the Lenovo software on your PC".
But there are thess problems:
There are 20 drivers for C560 for Windows 8.1 on Lenovo website.
Which of them I have to download and install?
I have tried at my Device Manager to verify for all of my devices to be last update (it was terrible work) and I always got information that my driver is up-to-date.
Somebody have told me that LSC is not SUITABLE for C560 machine.
So I have these questions:
Does anybody have installed LSC on his C560? A does it work fine (so it find and install always new driver) or he only get abstract ionformation Go to Lenovo's website to update the Lenovo software on your PC?
Are there other possibilities to regularly update drivers then LSC?
Thanks.
Solved!
Go to Solution.

Dragnote,
maybe it was caused my terrible English, so I will try to explain relevant aspects once again:
1) I bought my Lenovo IdeaCentre C560 (part number: 57322363) on 22th of May this year from "stone" shop, not through internet. The Web site of this shop is www.mironet.cz, but there is not my PC there in actual supply, because the shop stopped to sell this model. But the parameters etc of this model is on Mironet's Web site here:
http://www.mironet.cz/lenovo-ideacentre-c560-23quot-fhd-intel-core-i54570t-36ghz-8gb-1tb-dvdrw-nvidi...
but is is in Czech language.
2) My Windows are in Czech language, so I will translate it for you into English and therefore some informations/messages can be not fully exact. OK?
2) The LSC program was installed on my new PC with MS Windows 8.1 64-bit. I was only wanted to USE it! And why not. I got with PC only very slim User's Book, where was nothing much usable. And nothing about updating system and drivers, nothing about backuping etc. So I started to use SLC, because it was preinstalled there.
3) Problems of detect WHICH driver I have to update and HOW to do it:
3a) I tried three programs for detecting of my not-to-updated drivers: SLC, Detective and Smart Driver Update with these results: SLC only advice me to go to Lenovo website, Detective and Smart Driver Update gave me list of my not-to-update drivers, but the lists were rather different.
3a) The link I provided, http://forums.lenovo.com/t5/forums/replypage/board-id/ideaCentre/message-id/9220, lists 20 drivers and all of them were released in period between 16 Oct 2013 and 01 Dec 2013, so I have used abbreviation "end of last year", but you are right - mostly of them are from 16 Oct 2013.
3b) I TRIED to compare their date of released with drivers installed on my PC, but I have two basic problems:
3b.1) How to identify WHICH driver on my PC corresponds to drivers on Lenovo web site?
The names are NOT the same. For example: on Lenovo Web site is "Realtek Audio Driver V6695 for Microsoft Windows 8.1 (64-bit) - Desktop", released 17 Nov 2013, version: 6.0.1.6695. Then I found on my Device manager "Realtek High Definition Audio". So my question already is: "Is it the corresponding driver or not?". But let us say: it is.
So, now we can continue with next information on my driver : date of release is 15 Nov 2013, version: 6.0.1.7093. So I am not sure if these two drivers (one on Lenovo Web site, second on my PC) are the correct PAIR. There is antagonism between date of release and the version number.
3b.2) How to update, when I already "decided", that my driver is not-to-updated and therefore I need it to update?
I launch my Device manager, then I choice some driver, then I click on "to update driver software" and there display two possibilities: find driver on computer, or find driver on Internet. So I click on "Find driver on Internet". Then I wait about 10 seconds and then I ALWAYS get the SAME information: "The driver of this device is up-to-date"
This "optimistic" message I received for about 30 of my drivers. So there are three possible explanations how to explain it:
1) LSC, Detective and Smart Driver Update lie to me, when they tell me "You have some not-to-update drivers", because in reality all of my drivers ARE up-to-date.
2) I really have some not-to-update driver but because I cannot address correct WHICH driver is not to-up-date, I try wrong driver to update. Wrong, because it IS up-to-date.
3) I identify the correct not up-to-date driver but the choise "find driver on Internet" open finding of this procedure in non-Lenovo Web sites.
And maybe you are right when you write: "Sometimes, on a new system, Lenovo installs drivers that are "newer" than the drivers listed on their site. Don't worry, keep the newer drivers."
I apologize very much,but I am not able directly to use the information from you.
I never updated drivers on my old PC (I had it 12 years!), so I have no experiences what happens when I replace my NEW (up-to-date) driver with some OLD driver installed from Lenovo Web site. I am affraid that my keyboard, mouse, screen etc will stop its function.
When I bought this Lenovo machine, I to myself have told that I will keep my drivers up-to-date, but I do not how.
Mirek

How to update values for qty n batch in mska table

Hi experts,
i would lke to know is it possible that we can update value of availabity of stock which is existing batch wise in MSKA table field 'kalab' (qty) n charg (batch).
i mean we have devided material per document number into batch a b c.
suposse
we have '20015' material
for doc1 (vbeln) -- A qty 5
B qty 5
C qty 0
for doc2 (vbeln) A qty 2
C qty 5
B qty 0
But after delivery we want to change the distribution of stock material like .
for doc1 A qty 2
B qty 3
C qty 5
and for doc2 A qty 5
B qty 2
C qty 0
i create one programe and check the availabity in mska table n give input field to reorder the batch n quantity but how should i send these values in mska table so that sap will show the correct availabity of stock batch wise.
if somebody did it before. through ur input please .
Thanks.
Seema

Hi sutar,
Seems it is not WD related Question.
You are updating two tables here, but not updating in Database. check two tables how they are related.
and mysuggestion is try to update thease two tables by using code in se38. you will get where the problem is.
Cheers,
Kris.

How to update license for SUP 2.0?

Hi,
We had previously installed a trial version of SUP 2.0 on a windows server 2003 version 64 bit system. Since it was only a trial version, it expired and now we have obtained a license for the same.
How do I use the same installation by updating the license? Is it possible or I have to uninstall the whole thing and install from scratch?
Thanks & Regards,
Vaishnavi

HI
To apply license to any version follow these steps
1. Down load the license from Sybase control centre, and download the Licence file, copy and paste
\\sybase\unwiredplatform\servers\unwired servers\ (paste the file) (licence)
Run cmd promt >sybase\unwired platform\server\inwired servers\bin licence.bat ED DT 20
( as per the licence agreement)
regards
Aps

How to update firmware for mac os x

I downloaded firmware for my MacBook Pro 2007. Can someone assist me with the installation. The firmware is on my desktop but I do not know which application to open it with? I am confused by all of the files.

Hello Kappy,
Thank you for responding so quickly. I went online to Apple to update my MacBook Pro 2007 (Mac OS X 10.4.11) I have Firefox 3.6.28 as my internet connection. I downloaded the firmware to my MacBook Pro. I opened the Firmware restoration CD download and the following files were there:
IM51_0090_08B.fd
IM61_0093_05B.fd
LICENSE
MB21_00A5_06B.fd
MBP21_00A5_02B.fd
MBP22_00A5_02B.fd
MP11_005C_04B.fd
MP21_007F_02B.fd
README
XS11_0080_00B.fd
When I tried to open them to figure out which file I needed for the update. I received a message saying an application is needed to open the file(s). I do not know where to go from here. Do you have any idea how to proceed? I truly appreciate your support.

How to update CFBundleVersion for iOS?

How do you update the CFBundleVersion number in Flash Builder for iOS app distributions? Is there no way to do this?

Answering my own question in case anyone else has this issue.
If you update the <versionNumber> in your app.XML file, it has an effect on CFBundleVersion.
In my case, my <versionNumber> was 0.0.554. This caused the CFBundleVersion to be automatically set to 0.0.99 and I didn't know how to manually change the CFBundleVersion.
By changing <versionNumber> to 0.1.554, this caused the CFBundleVersion to be automatically set to 0.1.99. This change finally allowed me to update my iOS app.

How to update CONDITIONS for SERVICES in ME51N, ME52N.

Hi All,
My requirement is to update the CONDITIONS for SERVICES for the transaction ME51N, ME52N. I'm using BAPI_REQUISITION_CREATE to create the Purchase Requisition.
Thanks.

Hi Swetha,
u will definitely update the condition and services by using the bapi
*BAPIREQUISITION_CREATE*_
with regards,
Kiran.G

Did anyone know how to update status for Idoc Finsta01

Hi ,
Did anybody did updating idoc status and message for idoc type FINSTA01.
In Lockbox idoc_input_lockbx.
If any BADI avilibale fr this to update.
Thanks,
Madhu

Option 1:
See SAP Help as below you will get the idea-
Certain IDoc statuses are classified as archivable in the standard system, while others are not. You can display or change this classification.
The current status of an IDoc must be archivable before the IDoc can be archived.
Procedure
Choose SAP Menu -> Tools -> Business Communications -> IDoc Basis -> Control -> Status -> Maintain Status Value.
To change entries, choose .
Select the required status. By double-clicking you can call a detail screen, in which you can display or change the archivability.
By using or you can display or change all statuses one after another.
Option2: I think it might be possible using generate status file for the outbound IDOC and then change the status in the file further process it. But I am not sure, I just had a look at the Xns in WEDI and made this story
Thanks,
Naren

Satellite A200-1DN - How to update BIOS for Windows 7

I'm running 32bit Windows 7 on a Satellite A200 1DN. I've been having battery problems (plugged in, not charging) and I understand I need to update my BIOS. However I can't find a BIOS update for Windows 7, only Vista and XP.
Can anyone help? Should I update with the Vista BIOS? Are there any other options for solving this battery problem? I've already tried an ATX reset, and uninstalling the Microsoft ACPI Compliant Control Method Battery.
Any advice would be very much appreciated.
Thanks,
Ian

Theoretically, you can install Windows Vista to update Bios and return Win 7, then. Before doing, try this:
Unplug the computer from the AC adapter and turn it on. Let the computer run under battery power until the computer turns off
Remove the battery pack. Using a soft cloth, wipe off the battery packs connectors and the AC adapters connectors.
Re-insert the battery pack and plug the computer into the AC adapter
> I've already tried an ATX reset, and uninstalling the Microsoft ACPI Compliant Control Method Battery.
by the way, did you have the same issue before installing Win 7?

How SAP update DB for transaction FB01 or other transactions

Hi All,
I was trying to find out at what point SAP actually post data base entry for FB01. So I debugged the standard transaction but could not find any BAPI or BDC doing the posting. What I understood that directly database update has taken place.
I want to know at what place this database update in done in stadard SAP and do they use normal append statement or some other mechanism and why I could not find the exact program include and form where this is happening.
help me out to understand SAP system better. I want posts from people who themself have very good clearity over the SAP internal posting.
Thanks

An update function module has been called for posting the document, it is POST_DOCUMENT
Mode of the update is synchronous
program name : SAPMF05A
Include name : MF05AFF0_FCODE_BEARBEITUNG
if you analyze the source code in the Function Module POST_DOCUMENT, append statements are being used for updating the database.
Edited by: jeevitha krishnaraj on Mar 23, 2010 12:24 PM

How to update os for storm 9550

Similar Messages

Maybe you are looking for