How to update OS x for my minipad on MacBook Pro
Can not get the latest OS x update on my mini-pad as it says it's full but I forgotten how to upgrade the minipad when connected to my MacBook Pro ?
You need to delete stuff from your iPad to make more room for the iOS update to install.
Similar Messages
-
How to get install disk for lion on 2012 macbook pro
How do i get a reinstall disk for drivers and lion as well as ilife so i can install a new ssd drive in my computer
As Niel said, you have to install OS X through OS X Recovery. Respecting to iLife, if your Mac came with DVDs, you should have it on the Applications DVD that came with the Mac, and if it didn't come with DVDs, open App Store > Purchases, and install iPhoto, iMovie and GarageBand.
Then, if you want, you can download OS X from the App Store instead of using Recovery, so you can burn the installer onto a DVD or USB drive with Lion Diskmaker, so you won't have to redownload OS X each time you want to reinstall. As you have a Mid 2012 MacBook Pro, it will only work if it came with OS X Lion and you upgraded to Mountain Lion -
How do I download Office for Mac onto my MacBook Pro?
Just downloaded Office for Mac 2011 and having trouble installing it. Any suggestions?
Hi fhough,
welcome to the apple discussions community.
You downloaded the wrong office version.
Here you can download the right version, but keep in mind that you need a license key as well, to activate this version longer than 30 days.
Best,
Fabian -
How to update key fields for table
Hi,
how to update key fields for a table.The update statement is not working for the same.
Regards,Hi,
See the below example.
TABLES SPFLI.
DATA WA TYPE SPFLI.
MOVE 'AA' TO WA-CARRID.
MOVE '0064' TO WA-CONNID.
MOVE 'WASHINGTON' TO WA-CITYFROM.
UPDATE SPFLI FROM WA.
MOVE 'LH' TO SPFLI-CARRID.
MOVE '0017' TO SPFLI-CONNID.
MOVE 'BERLIN' TO SPFLI-CITYFROM.
UPDATE SPFLI.
CARRID and CONNID are the primary key fields of table SPFLI. All fields of those lines where the primary key fields are "AA" and "0064", or "LH" and "0017", are replaced by the values in the corresponding fields of the work area WA or the table work area SPFLI.
Regards,
raj. -
How can I download my TV episodes to my Macbook Pro. I bought them from my iPad2, and I looked for them with the same AppleID on iTunes Store and they wont download to my iTunes.
What country are you in ? Depending upon what country that you are in then you might be able to redownload them on your Mac's iTunes via the Purchased link under Quicklinks on the iTunes store homepage
If you're not in a country where TV programmes can be redownloaded then connect the iPad to your Mac's iTunes and use the File > Devices > Transfer Purchases to copy them over from your iPad -
How to use webcam for Yahoo Messenger on MacBook Pro, How to use webcam for Yahoo Messenger on MacBook Pro because it's not working =(
The cheap & easy way is to just drag the app to the Trash.
If you want to get all of the associated files use an app deleting app like the free AppCleaner;
http://www.freemacsoft.net/appcleaner/
Just drag an app and drop it on the AppCleaner icon in the Dock and it will find and present to you all the files it thinks are associated with the app. You can uncheck any that you want to keep and then let AppCleaner Trash the rest. -
I just purchased a MacBookPro after having a MacBook. I have ILife, IWorks and Office for Mac. How do I get those programs on to my MacBook Pro? I will still use my MacBook at work so I need those programs to remain on it as well.
You need a Firewire cable to run between the two Macs. Using Utility>Migration Assistant running on your new MacBook Pro, transfer what you want (with all the preferences and such) from your MacBook to your MBP. Here's more info from Apple.
You might have an issue with the Serial number for Office, but hopefully you have that around.
Hope this helps. -
I recently purchased, from the APP store, Lion for use on my MacBook Pro. To upgrade my IMac to Lion, need I make an additional purchase? If not, how do I facilitate the IMac upgrade?
No, you do not need to re purchase Lion. You can re download Lion on all your authorized Macs using the same Apple ID.
How to re download apps from the Mac App Store:
Open the App Store. From the menu bar click Store > Sign In
Click Purchases from the top of the App Store window.
Select which apps you want to re download. Then right or control click where you see Installed then click Install. -
How do i access word for mac on my macbook air?
how do i access word for mac on my macbook air?
Purchase it. Here's one link to an Amazon site to buy one of the many Office configurations:
http://www.amazon.com/Office-Mac-Home-Student-2011/dp/B003YCOJA8/ref=sr_1_3?s=so ftware&ie=UTF8&qid=1349217216&sr=1-3&keywords=office+for+mac
You would receive Office on a CD, and need a disk drive for your MacBook Air to access so you could download the software. -
After updating to 10.10.3, now my Macbook Pro 15" (mid-2014) will not stay logged in. I log in after restarting, and it will stay logged in for 3-5 seconds then immediately log off and go back to the login screen. Any help?
By the way, I also updated my Macbook Pro 17" (mid-2009) and it seems to be running fine, though I haven't tried to restart it and log in. I'm afraid I won't be able to get this one to work either if I do.Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
I have a license for CS6 on my MacBook Pro. I want to purchase an iMAC and be able to do my heavy duty Photoshop processing on this new iMAC when I am at home I need to keep CS6 on my MacBook Pro and use it when I travel. How can I have copies of CS6 on both machines. I am the only user of this software.
You can install and activate CS6 on both machines perfectly legally.
-
HT1557 why am i not able to update itunes 10.6.3 on my MacBook pro, for me to backup my ios7 phone
i have been trying to update itunes 10.6.3 on my MacBook pro, for me to backup my ios7 phone,i keep getting a message saying ( unable to update ), yet its no problem old windows computers, HELP PLEASE.
iTunes 10.6.3 is the latest iTunes version for Mac OS X 10.5.8.
iOS 7 devices require iTunes 11, which needs Mac OS X 10.6.8 or newer. Make a backup of your files with Time Machine, buy Mac OS X Snow Leopard from the Apple Online Store, insert the DVD and upgrade.
After upgrading, you can download 10.6.8 from the Apple website or just from Software Update. Then, if you want, you can upgrade to OS X Mavericks for free from the App Store -
how do i migrate files from a imac to macbook pro using an ethernet cable. the migration program asks for firewire and i don't own a fireWire. I do own an ethernet cable though
A FW cable would be far faster & Easier, but with Ethernet you need a compatible version of Migration Assistant running on both Macs.
-
I need to update my nikon D800 firmware but my Macbook Pro does not load a mass storage icon in my desktop, so, how can I update it if I can't get into the CF card pastes?
I'd say your sister messed up and your iPod is toasted.
Think about it... She plugged it in to another computer, she doesn't remember what she did (yeah, right), and now your iPod is not being recognized by your computer...
Also take into consideration how old is your sister, and how much does she know about electronics? -
How to change email on IPOD Touch for Facetime. I used same email for Facetime on my Macbook Pro
How to change the Email on my IPOD touch for Facetime. I used the same email for my IPOD & my Macbook Pro. Do I need a different email for each device.
Yes, if you want to call one device from another each must have a unique email calling address. Go to Settings>FaceTime and add another email calling address and delete the other one after you set up the second one.
I learned that a long time ago when I tried to call my iPod from my Mac.
Maybe you are looking for
-
Getting a jitter on a single letter in oscillating text
I've made this really cool logo that has a 45degree oscillation behavior on it. About a second before it flys off the screen "o" in the word vote jitters one pixel up. Can't figure out what is happening has anyone else experienced this.
-
Not being recognized by itunes
I have just purchased a second Ipod and when i log on to itunes a message replys "that another user is using ipod software please have them log off." Well I have loged off every user on my computer and still can't get itunes to recognize the new ipod
-
My ITunes won't connect to themusic store anymore!! Please help me!
When I try to connect to the music store I keep getting this message that I says that it can't connect and that I should check ny network connections and try again. I am using ITunes 4 with Windows XP Home Edition, Service Pack 2. I have tried Everyt
-
I have old documents that I want to copy the data out of and paste it into my new document using the form I have created. The problem is if I have the form open, I can't copy the data from the old document into the new form. Is there a way to get aro
-
Hi We use Grid Infrastrcture in 11.2.0.1 on AIX with ASM I want to copy a folder from ASM to FS with command cp over asmcmd but It does not work for folder ASMCMD> cp -r MYDB /myfs/ ASMCMD-08012: can not determine file type for file->'+MYASMDG/MYDB'