How to update pantone plus library

I'm having trouble locating updated pantone plus libraries in adobe's website.

They are not available separately, they ship with Photoshop. The latest versions get the updated libraries. You may want to consult Pantone and see if they offer this.
Gene

Similar Messages

I am missing colors in my Adobe Pantone Plus Library that are in my physical Pantone Plus Swatch Book.

I have the most recent Illustrator downloaded and the Pantone Plus Library however I cannot find some Pantone numbers that are in my physical Pantone Plus book. One specifically is PMS Blue 2384.
What do I do?

Thanks but that is not the problem. I figured it out. You have to download Pantone Color Manager Software and use the serial number from your registered Pantone Plus book to register the software. Once you do that then you can download the extra 360 colors and then export them to the Adobe programs...
Pain in the *** but it's the only way to get the extra colors in the Pantone plus book to your adobe Pantone Plus Library.The new Library is called Pantone+ V2.
Thank you for the response though!
-Ant
From: Jacob Bugge <[email protected]>
To: Anthony R <[email protected]>
Sent: Friday, February 27, 2015 2:34 AM
Subject: I am missing colors in my Adobe Pantone Plus Library that are in my physical Pantone Plus Swatch Book.
I am missing colors in my Adobe Pantone Plus Library that are in my physical Pantone Plus Swatch Book.
created by Jacob Bugge in Illustrator - View the full discussiona rod, You may need to download again/reinstall. For the latter,you may use the full three step way: Uninstall (ticking the box to delete the preferences), run the Cleaner Tool, and reinstall. http://www.adobe.com/support/contact/cscleanertool.html If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7235248#7235248 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7235248#7235248 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Illustrator by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

CS6 Pantone Plus Library Issues

We are having problems maintaining color consistency for digital output (as well as color shifts on proofs) due to the recent CS6 Pantone Plus color library update.
We have had to remove the updated libraries and replace them with the previous versions due to the unexpected color differences on output.
Has anyone else been having problems with the Plus update?
Is there a good explanation of why it was changed in the first place? We want to make sure we're not missing a good reason for the revised color libraries.
Chuck

Hi Guys,
I've read through this whole forum and I have found a solution to everyones problem. It is a work around but will save everyone alot of time and hassle and so far it hasn't let me down.
First step: Following the instructions as per the adobe page http://helpx.adobe.com/illustrator/kb/pantone-plus.htm for replacing the colour books. Make sure you follow all of the instructions for defaulting the setting in Illustrator CS6 to use only CMYK breakdowns (this is very very important) This will fix your problem in Illustrator however you will still notice that importing any artwork into indesign, the Pantone colours will still load as LAB versions (despite having deleted the Pantone+ swatches from your library)
NOTE: you will find that if you load old artwork files it WILL load your desired CMYK versions of any pantones correctly. However when you add new swatches it loads these as lab breakdowns. WHICH IS WHAT WE ALL WANT TO GO AWAY TO PROVIDE CONSISTENCY WITH PREVIOUS CLIENTS.
IMPORTANT INFO: Once a correct CMYK verions of a pantone has be imported into an Indesign document you CANNOT load the same pantone reference colour AGAIN. Meanding it is impossible to have a Pantone 282 C (CMYK) and Pantone 282 C (lab)... only one colour profile can be in a document. So basically if you pre-load all of the pantones as CMYK, Indesign is prohibited from STUPIDLY loading lab values of Pantones swatches:
SO.....
Step Two: (ensuring you have defaulted Illustrator in step1 correctly as per instructions from Adobe)... open Illutrator CS6. Create a new document. Click your swatches tab and clear it of all swatches so it is empty. Click OPEN SWATCH LIBRARY. click COLOUR BOOKS. Navigate to the swatch Library you require, (for me a mainly use PANTONE solid coated) NOT PANTONE+ ) however since you have followed the steps in step 1 these will not appear in your list as you have deleted all of the pantone + library. ( you can repeat this for as many colour books as required. When the swatched table opens, click the first swatch colour, hold shift key and the click the very last swatch colour and drag these into your swatch panel. Your will now have the complete colour book all defined as Pantone/spot colour/ with a correct(traditional) CMYK value. Now go to "save swatch library as ASE..."within the swatch dropdown menu. And save this somewhere permanent.
Step Three: Open Indesign CS6. Do not open a document. Go to your swatches tab. Click 'LOAD SWATCHES' and open your saved ASE file you made in Illustraor CS6. This will now load the full PANTONE colour library into your swatches tab. Remember as we said before that Indesign will NOT allow you to open two versions of the same pnatone reference, so no matter what file you open, as long as it has a pantone reference, lab or cmyk versions, because they are now already loaded into the swatch library, Indesign will force the conversion to ONLY BE CMYK values of your required Pantone references and IT WILL NOT default to lab values for Pantone colours.
If required. When you have finished your artwork, select, "select all unused" and then delete the ones you don't need.
WARNING: if you delete anything you have imported into your swatch library from your created ASE file... i.e. Pantone 282C.... when you manually add it back again inside Indesign it will default back to the undesired LAB breakdown of the Pantone.
Hopefully this cures a few headaches, so you can all get back to work and enjoy what are some great benefits of using CS6 versions.
On my final note, I do understand why Adobe is trying to force this change. It IS an improvement. However it does require that everyone in your company follows suit, it also requires that you explain this to each of your clients and it does mean changing colours and work flows, which is a decision of individual companies NOT the decision of Adobe to make it for you, which I think is a bad move on there part to try and FORCE this change.

How to update my music library?

Is there possibility to update the whole music library? I mean not manually adding folder by folder by "Add Folder to the library". But in one click to add new folders?!

File > Add folder to library and select the top level folder. You don't need to go to the lowest level folder.

How to update discoverer plus

Hello everyone,
i've been using for a lot of time discoverer desktop to develop reports and now i'm migrating to discoverer plus because of a better set of functionalities (but maybe a worse usability :-)). i've in my system an application server with installed discoverer plus but i would like to update it to the last version available without re-installing the whole application server.
I'm trying to find out a procedure to do that but no success till now.
Is it possible to do something like that?
And if yes where can i find detailed information about a single component installation?
Thank you all.
Have a nice day

Hi,
With the latest version of Discoverer there are different ways of installing Oracle BI. You may be able (if you want to) use your existing AS configuration but it depends on what version you have, whether you are installing with eBS, whether you need an AS infrastruction etc. The documentation (http://download.oracle.com/docs/html/B13918_03/assoc.htm#sthref115) is a good starting.
You don't say much about your existing setup so it is difficult to be more precise.
Rod West

Help with Pantone Plus Swatches

I posted a query to Pantone a month ago, but still no answer so I'm hoping someone can help please:
I have the CMYK coated Plus Series and wish to use them in InDesign CS5. I can't see them listed under Swatches > Color Mode. There is Process Coated but the colors are not the same and are incomplete. I have also installed myPantone 1.5.
My monitor is calibrated but colors don't seem to match up. How can I use the guides please?
I'm on OS X 10.6.7 on a new iMac.

Have you installed the Pantone Plus library into InDesign?
If not, go here
http://www.pantone.com/pages/Pantone/Pantone.aspx?pg=20721&ca=1
the utility to install it is near the bottom of the page.

I am having difficulty installing Pantone Plus Series colors into InDesign CC 2014.

I cannot figure out how to install PANTONE Plus Series Solid Coated 336 New Colors into InDesign CC 2014. I have installed the PANTONE color manager on my hard drive. Now what?

There was a thread on this recently....
You have to install one of the v2 fanbooks as the 336 supplement is now obsolete. Select the book you want, then from the file menu export to the programs of your choice.

CS5 update/upgrade to Pantone plus. How?

I am using CS5 and need to update my Pantone books to Pantone plus. How? Thanks

You download/ buy the respective swatchzes from Pantone and import the swatch libraries into your programs.
Mylenium

I have a iphone 4s and it does not play my itunes music after the last update. Only downloaded music plays. How do I get my library to play?

After IOS update, my iphone 4s will not play my music library. I will only play downloaded iTunes songs. How do I get my library to play?

re - sync from itunes
Peace, Clyde

How to update my library and copy images to replace current linked ones?

I've decided that I want to update my iPhoto library. Currently, most images that have been imported are just using links to images in their actual location. I want to change that so that all images are actually copied into the iPhoto library and no long remain outside of the software's structure.
There does not seem to be a command for doing that – sort of equivilent to one in iTunes that does something very similar. Does anyone have any ideas about how to do this? It seems that there might be an Automator workflow out there that would
step through my iPhoto library
check to see if it is a link external to iPhoto
if it is a link, then replace it with a copy of the actual image
delete the original image (i.e. with steps 3 and 4, 'move' the image into iPhoto)
produce a list of images that the original cannot be found (after Spotlight has had its go at finding the images for import)
Surely there is something out there already so I don't have to write it.

iPhoto has no built-in tools to turn a referenced library into a managed library.
There are two options using other programs, but both are not free:
Use the paid version of iPhoto Library Manager:If you copy your iPhoto Library with this tool, it will include the referenced originals into the copied library.
Upgrade to Aperture: Aperture is the professional version of iPhoto with more advanced editing and organisational tools, and it has built-in tools to manage referenced originals, relocate them, and consolidate them. iPhoto and Aperture are compatible and can both work on each other's photo libraries.
Regards
Léonie

I bought new music on itunes for th first ime in years and the updates erased all my music from my ipod and none of the new music that I bought was downloaded...a bunch of stuff I never heard of is now on my ipod. How do I reload my library?

I went to itunes for the 1st time in years and bought music. The updates removed all the songs on my ipod and did not downlaod my purchases. Instead I have a bunch of songs I never heard of. How do I reload my library on my ipod and get rid of the terrible junk that is on there now?

Was this a different computer/iTunes library than what it you had originally sync the iPod with? If so, that would explain why all of your content that WAS on your iPod was erased, since an iPod can only be synced with one iTunes library at a time.
As for your current predicament, you'll need to figure out how your iPod is configured to sync music and then adjust it so that the stuff you don't want on it is removed during the next sync operation and the music you DO want on it will be transferred over to it from iTunes.
B-rock

Hello, when i open itunes i get the message: The iTunes Library file cannot be saved. A folder was specified instead of a file. It seems I can't update my itunes library. how do i fix this? thanks in advance

hello,
when i open itunes i get the message: The iTunes Library file cannot be saved. A folder was specified instead of a file.
It seems I can't update my itunes library. how do i fix this? thanks in advance

Hi there Br0x,
You may want to try rebuilding the iTunes library as an initial troubleshooting step. Take a look at the article below for more information.
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/ht1451
-Griff W.

How to update managed metadata column for all file in document library using powershell

Hi,
How to update managed metadata column for all file in document library using powershell?
Any help on it.
Thanks & REgards
Poomani Sankaran

Hi TanPart,
I have changed the code which you have give in order to get the files from SharePoint 2010 Foundation Document Library.But i am getting below error in powershell.
Property 'ListItemCollectionPosition' cannot be found on this object; make sure it exists and is settable.
Could you tell me which is the issues in it?
See the code below.
$web = Get-SPWeb http://ntmoss2010:9090/Site
$list = $web.Lists["DocLib"]
$query = New-Object Microsoft.SharePoint.SPQuery
$query.ViewAttributes = "Scope='Recursive'";
$query.RowLimit = 2000
$caml = '<Where><Contains><FieldRef Name="Title" /><Value Type="Text">Process Documents/Delivery</Value></Contains></Where>' +
        '<OrderBy Override="TRUE"><FieldRef Name="ID"/></OrderBy>'
$query.Query = $caml
do
    $listItems = $list.GetItems($query)
    $spQuery.ListItemCollectionPosition = $listItems.ListItemCollectionPosition
    foreach($item in $listItems)
        #Cast to SPListItem to avoid ambiguous overload error
        $spItem = [Microsoft.SharePoint.SPListItem]$item;
        Write-Host $spItem.Title
while ($spQuery.ListItemCollectionPosition -ne $null)
Thanks & Regards
Poomani Sankaran

Trying to update system on 1st generation IPAD to give to my 5 year old to use. It is saying that i have purchases on this ipad that are not in my library which is odd because everything on the ipad was purchased current ID. How do I transfer to library?

Trying to update system on 1st generation IPAD to give to my 5 year old to use. It is saying that i have purchases on this ipad that are not in my library which is odd because everything on the ipad was purchased current ID. It is not telling me how to transfer them to library? Does anyone know?

Hi stefe109!
I believe this article can provide the information you are looking for:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/ht1848
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

HAVE BEEN UNABLE TO RETRIEVE MY OLD LIBRARY OF PHOTOS, ALBUMS AND PROJECTS SINCE DOWNLOADING AN APERTURE 3 SOFTWARE UPDATE TWO DAYS AGO. THE NEW LIBRARY ONLY HAS A FEW NEW PHOTOS IN ONE FOLDER PLEASE ADVISE AS HOW TO RETRIEVE OLD APERTURE LIBRARY WITH

HAVE BEEN UNABLE TO RETRIEVE MY OLD LIBRARY OF PHOTOS, ALBUMS AND PROJECTS SINCE DOWNLOADING AN APERTURE 3 SOFTWARE UPDATE TWO DAYS AGO. THE NEW LIBRARY ONLY HAS A FEW NEW PHOTOS IN ONE FOLDER
PLEASE ADVISE AS HOW TO RETRIEVE OLD APERTURE LIBRARY WITH ALL MY PHOTOS, ALBUMS AND PROJECTS

Find the old Aperture library in the Finder and double click it to launch Aperture with that library set to the default.
And check your caps look key. It appears to be stuck.

How to update pantone plus library

Similar Messages

Maybe you are looking for