How to Update Plz Help Me

I want to know that how to update the FW of my nokia N95 through The internet (ONLINE)
there is the profile setting  present in my nokia n95 
Menu--> Tool-->Utilities-->Device Mgr
and there in Device mgr profile setting is present so plz tell that what should i do 
Server Name????
Server ID????
server Password???
seesion mode????
Access point???
Host address???
Port???
User Name???
Password???
Allow configuration???
Auto-accept????
Network aythentic???
what should i do and what should write in these parameter which is mention above
thanks 

There two ways to update/upgrade your phone firmware. By NSU, pc running pcsuite connected to your phone; and by FOTA or over the air if supported by your provider. Don't bother with that parameters, just request from your provider the setup/configuration for data e.g 3g, gprs, mms ect. or you can go to Nokia for it. Data access must be activated & running to avail for FOTA. Get the product code of your phone(written in the box) or, under the battery compartment, for it will ask for that if there is an upgrade available in your area.
Download the latest version of pcsuite for your phone, then install it to your pc/laptop and connect your phone via cable (recommended), when connection is established, select from the menu software update. You should have internet connection with that pc.
In over the air(FOTA), connection via 3g (recommended, faster) just look in the menu for software update, it will prompt you what to enter. Data services that I mentioned above should be activated, supported & tested running, else no go.
Message Edited by android on 17-Sep-2009 03:36 PM
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Similar Messages

  • HT5052 i have iphone 3g simple. when i open itunes then screen appear ios 5 is required, i dont knw how to update, plz help me out

    pls help me out

    An iPhone 3G can NOT be upgraded to iOS 5. Where are you seeing this message?
    Stedman

  • My ph's apple4g i update latest virsion 7.0.4 now my ph was very slaw,can i get a 6.0.3 or 7.0.0 and how to install plz help me.........

    my ph's apple4g i update latest virsion 7.0.4 now my ph was very slaw,can i get a 6.0.3 or 7.0.0 and how to install plz help me.........

    3.5.x will be supported until August.
    http://www.mozilla.com/en-US/firefox/all-older.html
    Also see: [[Installing a previous version of Firefox]] and [[Installing Firefox]]
    If you want to troubleshoot your problems with Firefox 3.6.x you can start with [[Firefox hangs]]. Start basic troubleshooting with [[Safe Mode]].

  • Whatever the pics I saved to my iphone6 same copy does to my other phone how?? Plz help

    if I save a picture from what's app or I click From my iPhone it does copy to my other iphone4 automatically how is it possible plz help to get it right...... Anysolutions,?????
    Please help me to make it normal ..... i don't want it to copy on the other device
    plz tell me how to fix it

    Are both phones signed in with the same Apple ID?
    Here are your options:
    1. Go into iCloud on the iP4 and turn off iCloud pictures
    2. Get a different Apple ID for the second phone

  • HT201210 error 16, and cannot restore or update, plz help.

    my update was stopped in the middle,
    and next time i tried to restore and update, i cannot do any thing now,
    the error code (16) apprear all the times,
    my network, cable, windows, security, every thing is fine,
    plz help.

    Hello, talatafaq. 
    Thank you for the question.  Here is the article that provides the troubleshooting steps for error 16.
    Check for hardware issues
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
    Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    Regards,
    Jason H.

  • My APTV 3 restarts by itself after the last update. plz help me

    Netquark Sep 16, 2014 8:42 AM   
    Hello my APTV 3 restarts by itself after the last update.
    I restore my APTV with pc and it does not work.
    if I unplug the cables after 30 minutes, it works, but once sleep if you restarts the problem comes back. plz help me
    Apple TV

    Did you successfully restore the Apple TV?
    Apple TV (2nd and 3rd generation): Restoring your Apple TV

  • How to update Search Help template for ITS Service PZ03

    Hi all,
    There is a requirement to change the search help screens of pz03 Internet Service which is being used with EP 7.0.
    I have little experience in  ABAP so can anyone let me know how to change it. I was able to reach SEARCHHELPDHTML template. Is there a place I can download the template and update it.
    Please reply fast. Points assured.
    Regards
    Atul

    Hi.
    If you define an Internet Service, using SICF transaction, it shows all standard and z's search help, so I think it's not an ITS problem. Try to define your search help normally on R/3, an after that define your service with using new transaction.
    Best regards.

  • Error after update: Plz help

    I am facing a really strange problem and I have been banging my head against the wall for the past couple of days. I do not understand how no one else faced this error before. So quite possibly it must be my fault somehow. But heres the problem description
    I first do an insert into the oracle 9i database using ODP.NET -- this works correctly
    Immediately afterwards I do an read of the same row that I just inserted
    Immediately afterwards I do an update. The update always fails in the scenario no matter which row I am updating. All these operations are on the same table though.
    The update works just fine when there is no insert immediately preceding it.
    The error message that I get is:
    "Dynamic SQL generation failed. No key information found"
    But this does not make any sense due to:
    a) The database has the key info in it
    b) This scenario works when I use the Microsofts driver for oracle
    c) Inserts, updates work independently. They dont work only when I call an update immediately after an insert.
    DO u think there is so row locking thing going on here??
    But the error message is completely different.
    thanks for any help on this.

    well
    I finally figured out the cause of the error. I am not sure if this is a bug with ODP.NET or not but like I said above this problem only occurs when I use ODP.NET and not the driver provided by microsoft for oracle. The solution is to call fillschema before update, insert, delete into the database. The fillschema also fills in the primarykey information into the dataset. apparently I had assumed incorrectly that fill would do it, but dosent seem like it. So in order to use oraclecommandbuilder one needs to use fillschema too.

  • Urgent help required for update Plz help!!

    Hi i am updating my E51 and its displaying updating software please wait estimated time left 15 minutes for the past 1 hour.
    Please tell me what should i do....
    Its really urgent pls help....

    Hi,
    There might be a problem with either the NSU or the phone itself. Any updates on what happened?
    Next time make sure you meet the certain system requirements before proceeding with the update.
    Message Edited by nj15 on 01-Oct-2008 01:44 PM

  • HT3939 I have iPhone 3GS model number is A1303.I want to know can I update my iPhone to iOS  4.3. I currently have iOS 4.1 and I am from hyderabad,INDIA.so can I update it if I can update it then guide me how to update.plz awaiting for Ur earlier reply.

    I have iPhone 3GS and it is updated to iOS 4.1.
    but I could not download apps because it should be updated to 4.3 iOS.
    So I want to know can I update my iPhone to iOS 4.3 and I am from India Hyderabad. So can 4.3 iOS work in Hyderabad.
    Pls help me by emailing me on [email protected] & if I can update it then tell me the process of updating my iPhone 3GS.

    Updating to iOS 5.0 or higher is an erase/restore deal, so, follow the directions here to update your phone:
    http://support.apple.com/kb/HT4972
    If you chose to update, iOS 6.1.2 will be installed on your phone.

  • How to update the Help Files

    Hi Team,
    I am in the process of creating a customized help file.
    In the All Projects Tab,under Help Menu can I go and replace the existing pdf downloads with the customized help files?.If yes ,then kindly let me know  the steps.
    Regards,
    Avinash

    You do this in the BP Setup of the BP in question.  So, if this BP lives in the All Projects shell, you could navigate to that shell and switch to Admin mode.  if it is in a Project under that shell, you can navigate to that project and switch to Admin mode.  Then, go to Setup > Business Process.  Open the desired BP and open the general BP setup. You should see a Help File field in the General tab. Remove the existing file and add a new file, as desired.
    This will add the file for that particular shell instance only, so if you want this to be the new help file for all instances of that shell, you can follow the procedure above for a shell template of that type, then update the shells.
    Sean

  • How to update Community Help Client?

    On one of my PCs, the Community Help Client was updated to a version which (finally) supports Ctrl+F. However, my other PC is still on the old version and I can't find a download package / update site that would help me update. Any hints?
    Thanks,
    Borek

    You can update it from here: http://www.adobe.com/support/chc/
    Stephen

  • HT4972 I updated my iPhone and now my whatsapp says I have no contacts (I had upwards of 500 before my update) plz help!

    I updated my iPhone and now my whatsapp says I have no contacts (I had upwards of 500 before the update) Does anyone know how to retrieve my contacts?

    Read here:
    How to Recover WhatsApp Contacts on iPhone

  • Connection lost during update plz help

    my mobile is nokia 6680 while i was updating my mobile software there was a sudden power cut in my apartment,n my mobile isn't responding. its not even switching on, not showing any thing on d display screen.can it work like before or its completely useless.can u plz tel me
    waiting for ur reply..................
    Moderator note: E-mail address removed.Message Edited by sphere_s on 06-Nov-2007 06:52 AM

    Finally, I got it to work!
    Read the tip from designrs187, didn't read the addition at first, so I went to the hardware section on the control panel, clicked on 'Nokia USB phone parent' and told Windows to look for updates. It updated the driver after which installation of the update finally started!
    Guess it does the same as the tip I intended to use.
    Man, I hate this Nokia BS!

  • How to  update database  HELP

    Hi All
    I need to update the database with variable so I can't to use below statement
    stmt.addBatch("INSERT INTO COFFEES " + "VALUES('Amaretto', 49, 9.99, 0, 0)");
    Anyone can teach me which method I can use instead of above statement
    Thanks

    Hi,
    if you wanna update your db with variables... you have to use Prepared statement ... i am sure that there is a tutorial on the java website
    bye

Maybe you are looking for