How to update Seagate hard drive firmware from DVD drive in G4 Powermac DA

Posted earlier in wrong forum. Apologies if you see this twice.
Short version of story:
Just put Sonnet PCI SATA card in G4 Digital Audio Powermac running Tiger. Have replaced two IDE drives with Seagate Barracuda 7200.11 1 TB hard drive. It's recognized and working fine. EXCEPT: this is the now infamous drive ST31000340AS that WILL most certainly fail if it does not get the firmware update that Seagate has made available. (These drives are failing like crazy-- Google for info, do not buy!) I have the firmware update on CD as an ISO file (of course Seagate makes nothing that it Mac friendly but this has worked for other Mac users). But when I try to flash the firmware by starting from the CD ("C" key held down), nothing happens. The G4 just goes ahead and starts Tiger 10.4.11. I have also tried holding down "O + F + option + control on start up. I'm not getting anywhere.
Since the drive is functional and it's the only drive in the G4, what am I doing wrong? Help!

This is dated January 21st, so I hope it's been updated...
http://forums.seagate.com/stx/board/message?board.id=ata_drives&message.id=5692
Also, I found this:
MOST IMPORTANT - If you have a reasonable suspicion that you may have an affected drive - do not power the unit off - make fresh backups immediately. The power-on process is what triggers the failure.
Quoted from http://thedambook.com/smf/index.php?PHPSESSID=e2542559aab0b513be11ac48f7ec3a49&a ction=printpage;topic=3887.0
Sorry about the long second link. The usual shortening method didn't work.

Similar Messages

  • How to update my mac book pro from 10.5.8 to the leatest version

    how to update my mac book pro from 10.5.8 to the leatest version

    Upgrading to Snow Leopard, Lion, or Mountain Lion
    Upgrading to Snow Leopard
    You can purchase Snow Leopard by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The price is $19.99 plus tax. You will receive physical media - DVD - by mail.
    Third-party sources for Snow Leopard are:
    Snow Leopard from Amazon.com
    Snow Leopard from eBay
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
    Before upgrading check that you computer meets the minimum requirements:
    Snow Leopard General requirements
      1. Mac computer with an Intel processor
      2. 1GB of memory
      3. 5GB of available disk space
      4. DVD drive for installation
      5. Some features require a compatible Internet service provider; fees may
          apply.
      6. Some features require Apple’s MobileMe service; fees and terms apply.
    Upgrading to Lion
    First, you need to upgrade to Snow Leopard 10.6.8 as stated above.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
    Before upgrading check that you computer meets the minimum requirements:
    Lion System Requirements
      1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or
          Xeon processor
      2. 2GB of memory
      3. OS X v10.6.6 or later (v10.6.8 recommended)
      4. 7GB of available space
      5. Some features require an Apple ID; terms apply.
    Upgrading to Mountain Lion
    Be sure your computer meets the minimum requirements:
    Apple - OS X Mountain Lion - Read the technical specifications.
    Macs that can be upgraded to OS X Mountain Lion
      1. iMac (Mid 2007 or newer)
      2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
      3. MacBook Pro (Mid/Late 2007 or newer)
      4. MacBook Air (Late 2008 or newer)
      5. Mac mini (Early 2009 or newer)
      6. Mac Pro (Early 2008 or newer)
      7. Xserve (Early 2009)
    Are my applications compatible?
    See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.
    Am I eligible for the free upgrade?
    See Apple - Free OS X Mountain Lion upgrade Program.
    For a complete How-To introduction from Apple see Apple - Upgrade your Mac to OS X Mountain Lion.

  • Why won't my Intel iMac boot up, either from the internal hard drive or the DVD drive? It just displays a light grey screen, without any other icons, etc. The fact that it won't boot from the original system DVD is what baffles me the most. Any ideas?

    Why won't my Intel iMac boot up, either from the internal hard drive or the DVD drive? It just displays a light grey screen, without any other icons, etc. The fact that it won't boot from the original system DVD is what baffles me the most. Any ideas? It uses the latest version of Mavericks. Thanks!

    If the C key for Install Disc or R Command for OS X Recovery startup commands are not working, try holding the Option key for the Startup Manager.
    see > Startup Manager: How to select a startup volume
    If that does not work and you using a wireless keyboard, it may have become unpaired and you need to dig up a USB keyboard to invoke the startup commands.
    For more on gray screen, see > Mac OS X: Gray screen appears during startup

  • How to install windows 7 in bootcamp from flash drive os x 10.9.1

    How to install windows 7 in bootcamp from flash drive os x 10.9.1

    oooHideooo wrote:
    It DOESN'T WORK!!
    I tried tonnes of method already, and the apple guide method absolutely doesn't work for MacBook Air, 10.9.1
    Did you even tried it yourself????!! with Maverick 10.9.1 you will NOT be able to get pass the bootcamp first page:"install window 7". It will give an error msg saying "The installer disc could not be found"
    My usb confirmed bootable! I created it with bootcamp, and tested it on a different macbook and it works. But doesn't work on MacBook Air. (Even startup disk doesn't detect it as bootable in Air)
    anyone else has a real solution to this problem?
    Thousands have successfully tried it themselves and installed Windows on a Macbook Air. Perhaps if you provided some details about what you did and what errors you observed we could help you. The Boot Camp instaructions, if followed, will produce a successful install.

  • Is it possible to update my iPod touch firmware from 2.2.1 to 3.0?

    Is it possible to update my iPod touch firmware from 2.2.1 to 3.0?
    Is it free or do I have to pay?

    You'll have to pay a small fee.

  • HT5824 how to update contact info to icloud from my iphone

    how to update contact info to icloud from my iphone?

    If you are syncing contacts with iCloud on your phone, just edit the contact in the contacts app.  That edits it in iCoud.

  • I purchased Elements 13 for my Imac that doesn't have a DVD drive.  How can I install it without buying a DVD drive?  I would like to also install it on my MacBook Pro.  Do I have to buy a second version.

    I purchased Elements 13 for my Imac that doesn’t have a DVD drive.  How can I install it without buying a DVD drive?  I would like to also install it on my MacBook Pro.  Do I have to buy a second version?

    Download from Download Photoshop Elements products | 13, 12, 11, 10
    Install then enter your serial number.

  • My mac air died, after i reinstall from dvd drive, when i boot up again, i saw a prohibit sign showing up on the screen, then get to my logon screen.  After logon, it takes very long time to load any application.  pls help

    my mac air died, after i reinstall from dvd drive, when i boot up again, i saw a prohibit sign showing up on the screen, then get to my logon screen.  After logon, it takes very long time to load any application.  pls help

    OK. If you believe that.
    When the disk is starting to die it can be bad for a moment and then be good for a while. If there was no problem while you were checking it of course it shows up good.
    I tell you those are the signs of a disk that is about to die.
    Allan

  • My external drive switched from g drive to f, my itunes won't change to drive f, and it says drive g is unavailable, what can I do?

    This is not the easiest sight to sign up for and submit a question. However my external drive switched from g drive to f. As I downloaded the new version of itunes it won't change from g drive to f drive when I click the button to change.  It just says g drive is unavailable to download itunes which I already aware of but it won't let me browse and find the right drive my external drive is on.  It won't configure or anything what do I do?

    Change the drive letter back to G:
    See this -> http://windows.microsoft.com/en-US/windows-vista/Change-add-or-remove-a-drive-le tter

  • How can I get computer to use external DVD drive?I have a HP dvd640 plug in play drive I want to ude but my iMac dosen't see it as connected.

    How can I get *computer* to use external DVD drive? (1.8 GHz PowerPC G5 Version 10.3.9)

    Place cd/dvd in drive.  cd/dvd icon will show on desktop.
    How can I get computer to use external DVD drive?I have a HP dvd640 plug in play drive I want to ude but my iMac dosen't see it as connected.
    What is ude?
    How is it connected?  firewire or usb?
    When connected it should appear in system profiler.
    blue apple > about this mac > more info button. Click on the hardware line. It has a little triangle in front of the work hardware.
    look for firewire or usb.
    Robert

  • I Mac is not reading from DVD drive. Disk will insert, then some noises but after a few seconds, nothing.

    I Mac is not reading from DVD drive. Disk will insert, then some noises but after a few seconds, nothing. I am trying to install Broterh printer disks. Any ideas? I am on Mavericks.

    Reset the NVRAM/PRAM and Reset the SMC, then try again.

  • How can I get Maverisks to recognize internal DVD drive?

    The latest macOS, Maverisks, usually does not recognize a DVD disk that is inserted in the internal DVD drive. Is there way to solve this?

    Place cd/dvd in drive.  cd/dvd icon will show on desktop.
    How can I get computer to use external DVD drive?I have a HP dvd640 plug in play drive I want to ude but my iMac dosen't see it as connected.
    What is ude?
    How is it connected?  firewire or usb?
    When connected it should appear in system profiler.
    blue apple > about this mac > more info button. Click on the hardware line. It has a little triangle in front of the work hardware.
    look for firewire or usb.
    Robert

  • OS 9 Driver for retrofitted DVD drive

    Hello,
    I have a dual CPU 533 mhz G4 with OS 10.4.10 installed. It will run classic mode and will also boot from OS 9.2.2, which is still on the hard disk.
    The machine has been retrofitted with a "Super Drive," possibly made by Pioneer. It reads and writes CDs and DVDs. "About this computer" won't give me the name of a manufacturer.
    The DVD drive works fine in OS X. Classic and OS 9 won't recognize it, though, presumably because OS 9 needs a driver for it.
    I want to run an application that won't work unless Classic or OS 9 recognizes the drive and finds the CD mounted on the desktop.
    What are my chances of finding a driver for the DVD drive and successfully installing it? How would I identify the right driver if I don't know the manufacturer of the drive?
    I thought about making a disk image of the CD, in OS X, then using that in place of the CD in OS 9 or classic. I couldn't figure out how to make an image, though. Disk Utility in OS X doesn't seem to have that ability. I might have an OS 9 utility that could do it, but OS 9 can't see the drive.
    Is that likely to succeed? If so, how to do?
    Thanks in advance,
    Tim

    Hey folks,
    Sorry about the late reply. I hope it gets noticed, somehow.
    "About this Mac" shows the following information about the drive:
    ATAPI DVD DD 2X16X4X16:
    Model: ATAPI DVD DD 2X16X4X16
    Revision: G7Z9
    Serial Number: 99B5C1520144445601SP
    Detachable Drive: No
    Protocol: ATAPI
    Unit Number: 0
    Socket Type: Internal
    The markings on the front of the drive drawer are strictly generic. I haven't removed it from the case, yet. That's sort of a hassle.
    Does this give any clues about how to ID the drive?
    Come to think of it, I don't really remember where this drive came from.
    Don Archibald wrote that the following items should appear in the OS 9 system folder.
    •Extensions Manager -
    Apple CD/DVD Driver
    •Extensions folder -
    Apple Photo Access
    Audio CD Access
    Foreign File Access
    ISO 9660 File Access
    UDF Volume Access
    All are absent. I guess that would explain the problem.
    I'll try to find these files and install them. I'll get back to you if it doesn't work.
    Thanks a bunch.
    Tim

  • Help! how to apply Seagate hard-drive update from DVD drive on G4 Powermac

    Short version of story:
    Just put Sonnet PCI SATA card in G4 Digital Audio Powermac running Tiger. Have replaced two IDE drives with *Seagate Barracuda 7200.11 1 TB hard drive*. It's recognized and working fine. EXCEPT: this is the now infamous drive ST31000340AS that WILL most certainly fail if it does not get the firmware update that Seagate has made available. (These drives are failing like crazy-- Google for info, do not buy!) I have the firmware update on CD as an ISO file (of course Seagate makes nothing that it Mac friendly but this has worked for other Mac users). But when I try to flash the firmware by starting from the CD ("C" key held down), nothing happens. The G4 just goes ahead and starts Tiger 10.4.11. I have also tried holding down "O + F + option + control on start up. I'm not getting anywhere.
    Since the drive is functional and it's the only drive in the G4, what am I doing wrong? Help!

    I just got off the phone with Seagate who say that while my model numbers are the affected drives, my two drives have serial numbers that do NOT need a firmware update. (Yet!)
    However, I'm not feeling very lucky. I took these two drives from my Maxtor One Touch III 2 TB external hard-drive because it was failing intermittently-- "now you see me, now you don't." Not very good for a backup drive! But Maxtor/Seagate is providing nothing for Maxtor One Touch III owners under warranty but another refurbished (as in previously failed) Maxtor One Touch III and asking hundreds of dollar$ for data recovery. There is not even a firmware update at this point. People should be avoiding Seagate Barracuda drives (these used to be the best of the best, but not now) or at least researching them *very thoroughly* before buying.
    I guess, the good news is that I don't have to struggle with getting a firmware update to work on my PowerMac. Though thanks to you both I will know what to do if these drives eventually do need a firmware update. The other good news is that I got all my data back by pulling the drives from their enclosure which apparently causes overheating. I violated my warranty, pulled the drives, and got all my data back.
    At the moment both of my Barracuda drives are happily purring away in my PowerMac G4 giving that old baby 2 Tb to play with. (I use iPartition so getting the drives recognized on the G4 isn't a problem.) And since I have my new iMac 3.06ghz 24" with all my data backup on WD external drives, I will only use the G4 networked for extra storage (backup for my backup). (I am also using Disk Warrior and Data Rescue II to keep an eye on these drives.)
    Thanks again for the advice.

  • How do I transfer library and playlists from external drive to PC?

    My old PC with iTunes died for good. Luckily library and playlists were save on and external hard drive. How do I transfer my library and playlists from that drive to another PC (Windows XP) and are the arrangement of tracks within the playlists included?

    Correction to my last post (in bold): I'll try to explain what I did originally, not knowing everything that would be required to transfer, so you can better understand my situation. Just before my first computer died I saved my Music folder containing iTunes, Library, and Playlists folders to an external drive, so I no longer have programs, sub-folders or other information rooted in my first computer. I then downloaded iTunes to my second computer (Dell Vostro 1520, WindowsXP). I then dragged my Music folder from the external drive to iTunes 11.1.5.5 music tab and near as I can tell the library was transferred because in the Songs tab, the tracks are there in duplicate, one with the exclamation at the left and one that functions playback. (However, my total song number is doubled and that can be addressed later if it doesn't impede anything). In individual playlists each track within has a “not connected” mark. I have an extensive playlist catalogue so I would rather not have to reconnect them one by one. Can you think of a solution where I don't have to do that? Would you like more info? Aragorn

Maybe you are looking for

  • Playlists and the previous/next buttons

    Once again, Encore proves to be difficult to work with. I have a bunch of m4v and matching ac3 files that I want to put into Encore to create a Blu-ray. However, I cannot place them all in a timeline and be done with it. Because of the null space at

  • How do I extend the storage space on my iphone?

    Hi Guys I want to extend the storage space across my idevices since my wife can't stop taking photos of our new addition to the family on her iphone. We already both use iTunes Match so there is music on our phones it's all streamed off the cloud whi

  • Code Signing in CloudBuild

    Is it possible to run a post build action in the VS Online cloud that will sign my dlls? What is the best practice here and where would I put the certificate in this case?

  • Creating PDF Files

    I scanned several documents using my HP 6500A OfficeJet printer.  When I opened the PDF documents and tried to use the FIND option, regardless of what I typed in the FIND BOX, it was unable to find anything not even the word "the" or "at". Help....

  • WMV Convert

    Hello, I am making a dvd in iDVD. I shot the footage from it with my semi-new digital video camera, but I downloaded the footage on my PC last year so it downloaded as WMV. Now that it is on my mac I am trying to convert that file to mpg or something