How to update standard lookup for name_prefix and name_suffix

We're using Fusion HCM 8.
Just at the beginning of some General Setup, we have the need to to add addtional values for name_prefix and name_suiffix.
Name_prefix is empty, wehn getting it, in name_Suffix are 3 values.
We're using the Setup Option "Manage Common Setup"  and there the lookup type HRX_DE_NAME_PREFIX (SUFFIX).
For both the green plus is grayed and the Standard list is more or less empty.
Best solution for us will be getting a complete list in the lookups with the common values.
Additional it will e very helpful having the Chance to add/correct values.
Do we need other security rights for our implementation use?
Or do we have to open a SR, while fighting with a bug.
Many thanks for for all help

Both of these lookup types are of system lookup types and you can't add any value there. Moreover, both of these lookup types are for Germany and should not be used for any other country requirement. However, I can see one issue there in HRX_DE_NAME_PREFIX being a system lookup type and not having even one value there. You can open SR for that.
BTW, where do you want to use these lookups? If you have any specific requirement, you can consider creating your own lookup.

Similar Messages

  • How to create Standard text for terms and conditions of po print form

    Hi anybody,
      I want create Terms and condtions inside smartforms PO FORM , how do i create terms and conditons and how use font size? I don't want hard code inside smartforms , I will create seperate texts for terms and condition after i include inside smartform.
    How i will do ? anybody please tell me.
    Thanks
    S.Muthu.

    Hi Subramaniyan,
                             U an create an include text node in your smartform.And terms and conditions is the header level text,so i suppose you have to give the inputs as follows :
    Text Name         &**-EBELN&
    Text Object       EKKO
    Text ID              xxxx
    Language          &**-SPRAS&
    is the data at your end .To simplify more follow the following.
    1> go to your purchase order from me23n
    2> open any purchase order and click on the terms and conditions text.
    3> go to GOTO option of the text.and click on the HEADER.
    4> U will find the attributes of the text which you will have to pass to the Include text in your smartforms.
    The long texts arestored in STXH table.
    Reward Points if useful.
    Cheers,
    Deepthee Kasal

  • Oracle 11g upgrade: How to update stale statistics for sys and sysman?

    Hi,
    I am in the process of testing Oracle 11g upgrade from Oracle 10.2.0.3. I have run utlu111i.sql on the 10g database.
    The utility utlu111i.sql reports about the stale statistics for SYS and SYSMAN components.
    I executed dbms_stats.gather_dictionary_stats; dbms_stats.gather_schema_stats('SYS'); and dbms_stats.gather_schema_stats('SYSMAN');
    After that the utlu111i.sql still reports the stale statistics for sys and sysman. Does anyone know how to get rid off this warning successfully?
    Thanks,
    Sreekanth

    Does anyone know how to get rid off this warning successfully?Just ignore the warnings. Check The Utlu111i.Sql Pre-Upgrade Script Reports Stale Sys Statistics - 803774.1 from Metalink.

  • How to update key fields for table

    Hi,
    how to update key fields for a table.The update statement is not working for the same.
    Regards,

    Hi,
    See the below example.
    TABLES SPFLI.
    DATA WA TYPE SPFLI.
    MOVE 'AA' TO WA-CARRID.
    MOVE '0064' TO WA-CONNID.
    MOVE 'WASHINGTON' TO WA-CITYFROM.
    UPDATE SPFLI FROM WA.
    MOVE 'LH' TO SPFLI-CARRID.
    MOVE '0017' TO SPFLI-CONNID.
    MOVE 'BERLIN' TO SPFLI-CITYFROM.
    UPDATE SPFLI.
    CARRID and CONNID are the primary key fields of table SPFLI. All fields of those lines where the primary key fields are "AA" and "0064", or "LH" and "0017", are replaced by the values in the corresponding fields of the work area WA or the table work area SPFLI.
    Regards,
    raj.

  • Hi..how we enter standard text for smartform using include text

    hi
    guru
    ..how we enter standard text for smartform using include text..
    i know only using so10 we write text..
    in smartform it asking text-object
                                     text-id,
    so what values we should give to get text

    Hi,
       Do u want to print Standard Text or the Texts that are maintained at the Transaction level.
    If it is standard text , then u use text id as ST or if it is Texts that are maintained at the Transaction level then u have to go to that specific transaction and check for that text , then go to text editor ,in the goto menu u have header data where u get the Text id , text name.... , use them in ur smartform in the INCLUDE text.
    Further u have the option of text modules in smartforms which act as standard texts, so if u r going for creation of standard texts then its better to use text modules.
    Regards,
    Shafivullah Mohammad

  • How to update equipment ship to party and sold party data

    Hi all,
    How to update equipment ship to party and sold party data? Is there any BAPI or FM?

    Hi Suresh,
    chech with the below
    PM_PARTNER_UPDATE      "Parner update
    ITOB_EQUIPMENT_READ_SINGLE   "read equmment data
    ITOB_EQUIPMENT_MODIFY_SINGLE   "update the parner data for the same equimpmet
    hope it helps you..
    Thanks!
    Edited by: Prasanth on Apr 14, 2009 6:30 PM

  • HT201210 Keep getting error 9006 when updating iOS system for iPOD and iPHONE and not sure what to do, any solutions

    Keep getting error 9006 when updating iOS system for iPOD and iPHONE and not sure what to do, any solutions?

    Errors related to third-party security software
    Error 2, 4 (or -4), 6, 1000, and 9006
    Follow the steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. An incorrectly set default packet size can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or phobos.apple.com isn't blocked by a firewall or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under "Advanced steps > Rename, move, or delete the iOS software file (.ipsw)" below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.
    Errors related to downgrading iOS

  • Is there standard report for planned and actual devlivery date?

    Hi Guru,
    Could you help me to find standard report to compare planned delivery date in PO and actual delivery date (GR Posting date)?
    I wonder, Is there standard report for planned and actual delivery date?
    or I have to create a customizing report.
    Thank you very much.

    hi
    i dont think it is possible to see both in one pan so try to create some Z report
    u try ME80fn here u have to change the views ,in del shedule view u can see the delivery dtae and in PO histry view u can see the posting date
    regards
    kunal

  • How do we reset password for SAP* and DDIC user in SAP R/3 ECC 6.0?

    Hi,
    How do we reset password for SAP* and DDIC user in SAP R/3 ECC 6.0?
    I tried with acual method as below from client '000':
    DELETE FROM USR02 CLIENT SPECIIED WHERE BNAME = 'SAP*' AND MANDT = '001'.
    After this when I tried to logon '001' using SAP* with password PASS it is giving  the message that Incorrect logon and password.
    (Also when I checked for 'SAP*' in 001 it looks like it is not got created as I queried as below:
    SELECT SINGLE * FROM USR02 CLIENT SPECIFIED WHERE BNAME = 'SAP*' AND MANDT = '001'.)
    Can anybody throw some light on this? RewardS is guranteed for solutions!
    -B S B

    Hi again:
    I forget to tell.
    You must restart the system. So, that a new user with the name "sap*" gets generated with password "pass"
    Hope this wil help,
    Eric

  • How to create custom infotype for training and event management

    hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
    PS No – PA0000-> PERNR
    Name   - PA0001 -> ENAME
    IS PS.No. – PA0001-> PS no. of Immediate Superior
    IS name PA0001 -> ENAME
    thanx in advance
    afzal

    Hi,
    Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
    If you wish to create a PD infotype, use transaction PPCI to create the infotype.
    But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
    If you wish to create a PA infotype, use transaction PM01 to create the infotype.
    But before that you may be required to create a strcuture PSnnnn  (where nnnn is the infotype number) with all the fields relevant for the infotype.
    Regards,
    Srini

  • How do I change platform for downloading and installing Photoshop Elements from Windows to Mac?

    How do I change platform for downloading and installing Photoshop Elements from Windows to Mac?

    As long as your license supports both platforms you should only have to download the Mac version and install/activate using your serial number.  If you need help finding a link to download the file, please indicate the PSE version you need.

  • HT1338 I'm running MacOS 10.7.5 with all updates and did an update last night for aperture and now aperture doesn't open.  What's Zup?

    I'm running MacOS 10.7.5 with all updates and did an update last night for aperture and now aperture doesn't open.  What's Zup?  Help!

    Also when I do the system update it's not giving me an update for the latest Snow Leopard. I never knew that was available until I started looking around this site and it seems that since I have the internal dual core I should be able to update to mountian lion...is this correct? Will someone please help me and walk me through this. I love my mac I want to have it running like it should be.

  • How to create a Templates for Categories and Products In BCC

    Hi All,
    Could you please tell me How to create a Templates for Categories and Products In BCC and how Can I get those Templates details(Categories and Products)in jsp
    If possible can any one send the document or where we find in atg docs
    Regards,

    At product/category/sku level there is a property called template.
    Find the property in ACC/BCC and provide all the values including the URL property.
    In you jsp, you can use this property from product/sku like the way you retrieve any other property from sku/product.
    <dsp:valueof param="product.template.URL" />
    Using that property with <dsp:include> includes that page.
    Peace
    Shaik

  • Explain how to use standard LSMW for MM01

    Can anyone explain how to use standard LSMW for MM01 Tcode.pls explain briefly.

    Hi
    Create a project using 0020 as method.
    Max

  • How to set userlevel permission for GFS and NFS

    hi
    how to set userlevel permission for GFS and NFS?
    regards

    hi
    http://www.redhat.com/docs/manuals/enterprise/
    AND
    http://en.tldp.org/
    probably your best bet.
    regards

Maybe you are looking for