How to update TASK_hyperlink_address field with PSI?

Simple question but hard to do.
Can we have custom fields with html hyperlink?
And why having fields read only ????

Enterprise Custom Fields do not support Hyperlinks. You can use the HREF standard task field for this purpose.
Gary Chefetz, MCITP, MCP, MVP msProjectExperts
Project and Project ServerFAQs
Project Server Help BLOG

Similar Messages

How to update ABSKZ field in the table EKPO

Hi
Is there any way to update the rejection indicator (ABSKZ) field of table EKPO?.
I am looking at BAPI_CHANGE_PO FM, But it does not have ABSKZ field in the item structure BAPIMEPOITEM.
Do I need to extend the BAPI structure with ABSKZ field ?
Regards
Raj.

Hi
To extend BAPI_PO_CHANGE for EKPO-ABSKZ field , we have to add field in the structure BAPI_TE_MEPOITEM to pass it to EXTENSIONIN. As ABSKZ field already availble in the EKPO it is not allowed to add ABSKZ in the structure BAPI_TE_MEPOITEM. it is throwing below error message.
Field ABSKZ in table EKPO is specified twice. Please check
Since it is not Z field and also not availble in the structure BAPIMEPOITEM not sure how to update ABSKZ field in the EKPO table.
Please advice.
Regards
Raj

How to update 2 fields automatically rest manually on page

Hello folks,
I have got a question on how to update 2 fields in a table automatically (in my case this is one field for the user and one field for the correct date and time). This should happen automatically every time an user changes a row in the table. But it seems as if i cant change the fields i tried it with the changing of the textfield but he dont change the values in the database. I even tried a separate update statement but since this is set after the commitchanges() command it seems as if he ignores any following commands.
So anybody a good idea how i can change easily these two data fields? I just cant believe that you must manually change the fields, thats not the use of these 2 fields.
Thanks in advance for your help
Acinonyx

To be exact i have got a page with different fields which get their data from my database. Two fields which contain an userid and the other a date and time value should get updated automatically when the user changes something of the other values on this page and press a button which calls the commitchange method. But since this should happen automatically and not manually i cant put these changes in the database. The manual changes are saved without any problems but the automatical changes not. So my question is how can i change a value programmatically and make him save these canges in the database?
I already tried to put the new values in the fields or even detailed in the database but i cant get him to update these two fields.
Acinonyx

How to update two tables with trigger

Hi:
how to update two tables with trigger ?
I have two tables :
(1)ASIA
MI number;
(2)ASIA_P
ID number;
When I insert a new value into the asia.MI ,I also can
insert the same value into the asia_p.id field.
I have write a trigger as follows but it does't work.
create or replace trigger MI_TRG
before insert on asia
for each row
declare
seq number;
begin
select MI_SEQ.Nextval into seq from dual;
:new.MI:=seq;
insert into ASIA_PRO(MI_ID)
values
(seq);
end MI_TRG;
How to realize it ?
thanks
zzm

Why do you say it does not work?

How to update key fields for table

Hi,
how to update key fields for a table.The update statement is not working for the same.
Regards,

Hi,
See the below example.
TABLES SPFLI.
DATA WA TYPE SPFLI.
MOVE 'AA' TO WA-CARRID.
MOVE '0064' TO WA-CONNID.
MOVE 'WASHINGTON' TO WA-CITYFROM.
UPDATE SPFLI FROM WA.
MOVE 'LH' TO SPFLI-CARRID.
MOVE '0017' TO SPFLI-CONNID.
MOVE 'BERLIN' TO SPFLI-CITYFROM.
UPDATE SPFLI.
CARRID and CONNID are the primary key fields of table SPFLI. All fields of those lines where the primary key fields are "AA" and "0064", or "LH" and "0017", are replaced by the values in the corresponding fields of the work area WA or the table work area SPFLI.
Regards,
raj.

How to update single field

Hi frnds,
                    How to update single field data in Z table .
                   I am taking data from screen, when i press update button the data will store specific field data in Z table.

Dear Rakhi,
You can use the below syntax.
Hope this would solve your problem.
LOOP AT tpra INTO wpra.
    UPDATE zpra
    SET    pra2 = wpra-pra2
    WHERE pra1 = wpra-pra1.
ENDLOOP.
In WHERE give KEY VALUES
In SET give the particular value that has to be changed.
Regards,
Pintoo
Edited by: pintoo2805 on May 18, 2010 7:10 AM

How to create a field with 1200 chars length

Hi,
Will anybody let me know how to create a field with length 1200 in a table.
Regards,
Madhavi

Hi Madhvi,
Other thing what you can do is
1. First create a Table type.
Goto SE11-> Dataelements ->Table type
There on the next screen select Predefine radio button & there provide data type & size.
2. Create a structure having a field typa of Table type created before. say that field is quant.
Now in your program refer that structure to create an internal table & work area.
Now if u append ur text to the field quant.
try creating line type of size more that 255 if it works then fine other wise reduce it.
Note:: This will be a deep structure.
so first append value to the field quant, the at the end of first record append valu to ur internal table.
thanks
Satyam

How to map Idoc fields with external file

Hi All,
How to map Idoc fields with external file.
I want to check the settings where Idoc fields are mapped with external file.
Thanks in advance.
Regards,
Govind.

If you have configured a fileport where on trigger of IDOC you are creating the file, you can look at the message type documentation and get the offset values for each field in each segment

How to update the field ZLSPR of table BSEG

HI Friends,
Can anyone tell me how to update the field ZLSPR of table BSEG? I've a 700 line abap program and I should include some logic in this program to make an entry into BSEG-ZLSPR. Is there any FM/BAPI available? Is BDC a healthy approach?. My team lead do not want me to use UPDATE statement....please help.
Thanks in advans,
Varsha.

Hi,
Hi ,
You will need to group that radiobuttons so that SAP knows they are linked together. To do this using the grahical layout editor simply select all the radiobuttons and then right click on them, Now choose define group. Once you have done this you should not need any of the "clear" or "='X'" statements SAP should control it all for you.
hope this helps
Reward if found helpfull...
Venkoji Babu.

HT4623 How to update ipod touch with software version 4.1????

How to update ipod touch with software version 4.1????

Open itunes on your computer, connect ipod.
That's it. It will prompt you to update to the latest available version.

How to update database table with key field?

Hello Experts,
I have a database table with following fields
MATNR   - Key
SSOUR - Key
KUNNR   - Key
MENG1
MENG2
MENG3
And this table contains records like...
MSD50001     R      1000001     5.30    2.30    5.25
MSD50002     R      1000002     5.30    2.30    5.25
MSD50003     R      1000003     5.30    2.30    5.25
MSD50005     R      1000004     5.30    2.30    5.25
MSD50004     R      1000005     5.30    2.30    5.25
I have an internal table with same fields of above database table.
MSD50001     A      1000001     5.30    2.30    5.25
MSD50002     A      1000002     5.30    2.30    5.25
MSD50003     A      1000003     5.30    2.30    5.25
MSD50005     A      1000004     5.30    2.30    5.25
MSD50004     A      1000005     5.30    2.30    5.25
MSD50006     A      1000006     5.30    2.30    5.25
I want to update the DB table with following internal table records.
If internal table records = db table records are same then Update....else insert from internal table to db table.
But here, SSOUR is key field so i am not able to use
MODIFY dbtab from itab.
It results me , entries in internal table are inserted into db table.
So i have double records.
Is there any statement which updates the key field? and if no fields in db table then insert it?
Regards
RH

hi,
u cannot update akey field.u can update only non key fields by using key field as a selection criteria.For example if u go to sm30 if u enter any table for inserting values, the key field will always be greyed out it is not succumbed to chnges.but u can insert value into ,if ur inserting and in the insert staemnet if u have key field which is already present in the table it will return sy-subrc = 4 otherwise it will insert the record and return 0.
eg for update :
UPDATE zdm_wtyprof SET upload_status = 'S'
                         WHERE spart = wa_upd-spart.
here spart is the key field and it will update the status field in the table as S.
if updated succesfully it will return 0.
SIMILARLY U CAN USE select.

How to update delivered field in co03 with migo transaction?

We're doing a migo for a prod. order - though when looking into the CO03, the delivered quan is not updated.
prod order with control key PP05 (PO Auto GR for Exernal Pur.order), so it should be auto GR.
Any ideas?

Hi,
Control key pp05 is for external purchase order. Have you given this control key in your routing.
Else check the control key used in your routing. For the last operation if it PP01(eg), then in t.code op67, choose pp01 & select auto GR. Now check after confirmation, Auto GR would have taken place.
Else you can maintain auto GR setting in production scheduling profile in t.code OPKP.
Regards,
Senthilkumar

Master Detail Form - How 2 update a field in the Detail form using a query?

Hello,
I have a master detail form with, each master record having a fixed(6) number of detail records. One of the fields in the detail record is the PART_DESCRIPTION field. I am trying to update this field by querying Table_X. TABLE_X is in the format of (desciption id, description). Description id runs from 1 to 6.
When the form displays, the PART_DESCRIPTION field for the 6 detail records needs to be automatically populated with the six values of description stored in Table_X. How can this be done?
Tried using session storage objects, but made no headway.
Would greatly appreciate pointers on how to go about doing this.
Thanks.
Dev

If you are on a Portal Version lesser than 3.0.9.8.3, then please try the following to populate
the PART_DESCRIPTION field.
Steps:-
1> Edit the form and go to the Additional PL/SQl section and put the following code in the
"...after displaying the page area" :-
declare
type t_vc_arr is table of varchar2(4000) index by binary_integer;
l_arr_desc t_vc_arr;
l_form_name varchar2(200);
l_form_state varchar2(500);
begin
l_form_name := p_session.get_module().get_name();
l_form_state := p_session.get_value_as_varchar2(
p_block_name => 'MASTER_BLOCK',
p_attribute_name => '_FORM_STATE'
if l_form_state = 'QUERY_AND_SAVE' then
select description
bulk collect into l_arr_desc
from <schema>.table_x;
htp.p('
<script>
var descArr = new Array();
var Fidx = 1;
var formObj = document.WWVM'||p_session.get_id()||';
var fieldName = "'||l_form_name||'.DETAIL_BLOCK.PART_DESCRIPTION.0";
for i in 1..l_arr_desc.count loop
htp.p('descArr['||to_char(i-1)||']="'||l_arr_desc(i)||'";');
end loop;
htp.p('
for (var i=0; i < formObj.length; i++){
if (formObj.elements.name == fieldName+Fidx){
formObj.elements[i].value = descArr[Fidx-1];
++Fidx;
htp.p('</script>');
end if;
end;

How to update flex field data on a human task?

After entering a human task and assigning the data how do you then update flex field data whilst the task is still assigned. I'm using the task services to communicate with the task and applying filters based on the flex field data.
I want to update the data when actions take place on the task e.g. suspend, aquire, release.
Any ideas?

You can fetch the task , change the flex attribute value and update the task. Find below the steps we do for updating one of the TextAttribute
Task completeTask = // get the task using task query service
completeTask.getSystemMessageAttributes().setTextAttribute2(updatedfolderName);
completeTask = // update the task using "updateTask" method

How to update information fields of a profile in Oracle UCM using RIDC

Hi All
I have a requirement in which i need to modify/update the metadata/information fields of a Profile in Oracle Webcenter Content(UCM).
I found out that this can be achieved using RIDC api, but i have little knowledge about the same.
If someone could suggest about how to retrieve and update the fields in UCM using RIDC or some other approach would be of great help.
It's really important.Kindly help
Regards
ACM

user13069455 wrote:
Hi Jiri
Even i have thought about the same as one of the approaches, but i was a bit apprehensive about using this one.
I have few stupid queries regarding this:
1)Will it expose the production database(connection details) to the environment?Yes. If you don't like the idea of giving connection to the database to a "third-party" program, you could go from the other side - create a UCM component (some kind of scheduled job), which will be a part of UCM, but do the same. It will be a bit more complicated, but might be considered more secure.
2)Will it have any performance impact?I don't think there will be much impact - most of time, tables will be accessed in read-only mode (pulling the data out), so except few per cent of CPU and some memory it should not consume anything. Besides, you should be able to schedule upload to "quiet hours", if there are some
3)Will it still be an integration with the UCM?Well, yes. It will be integration at the database level. But honestly, as long as it works, do you care how is it called?
>
Thanks
ACM

How to update TASK_hyperlink_address field with PSI?

Similar Messages

Maybe you are looking for