How to update the dps patch to my current Adobe CS6
how to update the dps patch to my current Adobe CS6
http://helpx.adobe.com/digital-publishing-suite/help/installing-digital-publishing-tools.h tml
Neil
Similar Messages
-
Error in phase XPRA_EXECUTION while updating the SAP_BASIS patch !4
Hi ,
I am trying to update the sap_basis patch from level 13 to 14 . While updating I am getting
Error in phase: XPRA_EXECUTION
Reason for error: TP_STEP_FAILURE
Return code: 0012
Error message: OCS Package SAPKB70014, tp step R, return code
0012
In ST22 It says Syntax error in program "CL_CLS_ATTR_VALUE_ASSIGNMENT==CP
any help would be appreciated..
Regards,
PradeepThis is what I get in the import log
The Syntax Error is given below
Execution of programs after import (XPRA)
Transport request : SAPKB70014
System : DEV
tp path : tp
Version and release: 372.04.59 700
Program terminated (job: RDDEXECL, no.: 17163300)
See job log
Execution of programs after import (XPRA)
End date and time : 20090518171648
Ended with return code: ===> 12 <===
untime Errors SYNTAX_ERROR
Date and Time 18.05.2009 17:16:34
Short text
Syntax error in program "CL_CLS_ATTR_VALUE_ASSIGNMENT==CP ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLCLS_AFTER_IMPORT" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_CLS_ATTR_VALUE_ASSIGNMENT==CP " in include
"CL_CLS_ATTR_VALUE_ASSIGNMENT==CM00D " in
line 1:
"Method "GET_DETAILS_OF_ASSIGNMENT" does not exist. The following simil"
"arly-named methods do exist: "GET_DESCRIPTION_OF_ASSIGNMENT", "GET_PAC"
"KAGES_OF_ASSIGNMENTS" and "GET_CLIENT_ASSIGNMENTS"."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPLCLS_AFTER_IMPORT" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "CL_CLS_ATTR_VALUE_ASSIGNMENT==CP
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following syntax error was found in the program
CL_CLS_ATTR_VALUE_ASSIGNMENT==CP :
"Method "GET_DETAILS_OF_ASSIGNMENT" does not exist. The following simil"
"arly-named methods do exist: "GET_DESCRIPTION_OF_ASSIGNMENT", "GET_PAC"
"KAGES_OF_ASSIGNMENTS" and "GET_CLIENT_ASSIGNMENTS"."
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error. -
How to update the table value in the valuechange event?
I have an input field in the datatable with the valueChangeListener
<rich:dataTable id="cart" value="#{cart.cartList}" var="item">
<h:inputText value="#{item.cost}" id="qty" valueChangeListener="#{items.updateCost}" onchange="submit()">
<h:outputText value="#{item.errorMsg}"> </h:outputText>
in the backing bean
Item item = (Item) model.getRowData();
// do some update, if the cost too larger, change to max_cost
item.setCost(max_cost);
item.setErrorMsg("Error Msg");
After calling the valuechange method, the screen output doesn't update the cost.
How to update the table value in the valuechange event?As you're misusing the valueChangeListener to set another input field, you need to skip the update model values phase. Otherwise the value set in the valueChangeListener will be overridden by the submitted value. You can do this by calling the FacesContext#renderResponse() inside the valueChangeListener method. This will shift the current phase immediately to the render response phase, hereby skipping the update model values and invoke application phases.
-
How to update the condition price in the sales order for all the items
Hi,
How to update the condition price for all the itmes in the sales order to carry out the new price automatically through a stand alone program, for all the orders in the billing due list table?
Thanks,
BalaramHi,
There is a change in the requirement.
Scenario:
I have created a sales order with some 4 condition types, in that 2 condition types are of class A & B and the other two is of class C. Here I need to update the condition price of class A & B only and the remaining condition types should not get update even though there is an updated price is available.
For the above scenario, I need to write a standalone program. Do we have any function modules to update the price of the single condition in the sales order? Please tell me how we can update the sales order at item condition level.
Thanks.
Balaram -
How to update the condition price in sales order while creating the invoice
Hi,
How to update the condition price in the sales order to carry out the new price while creating the invoice?
While creating the invoice it should update the condition price in sales order.
Thanks,
BalaramNo, pricing is not there in delivery.
I found an exit for VF01transaction where we can update the price in order.
Can you please tell me how to update the price if I have the order, material numbers and conditions number?
Thanks,
Balaram -
How to update the inventory after committing order..?
How to update the Inventory stock level of a commerce item after committing the order.. in ATG 10.0.1..?
Thanks in Advance,
Vishnu & Nithin Kayithiyou can add the pipeline chain after the processOrder in the commerce pipeline , in the runProcess method call InventoryManager.decreaseStockLevel(String pId, long pNumber);
-
How to update the data in sqlserver table using procedure in biztalkserver
Hi,
Please can any one answer this below question
how to update the data in sqlserver table using procedure in biztalkserver
while am using executescalar,typedprocedure getting some warning
Warning:The adapter failed to transmit message going to send port "SendtoSql1" with URL "mssql://nal126//MU_Stage2?". It will be retransmitted after the retry interval specified for this Send Port. Details
Please send me asap....
Thanks...Hi Messip,
A detailed error would have helped us to answer you more appropriately but
You can follow the post which has step by step instructions, to understand how to use Stored Procedure:
http://tech-findings.blogspot.in/2013/07/insert-records-in-sql-server-using-wcf.html
Maheshkumar
S Tiwari|User
Page|Blog|BizTalk
2013: Inserting RawXML (Whole Incoming XML Message) in SQL database -
How to update the BOX version of the Logic Pro 9 in Mountain Lion??
Hi!
How to update the BOX version of the Logic Pro 9 in Mountain Lion?
For example, if tomorrow will be new updates for Logic Pro for exapmle 9.1.8. (now I have 9.1.7) Will I not able to get it?? Now should I buy the second Logic pro??
Recently I have got answer from App Store support:
"Max, since you have not purchased the app in the App Store, you can't get updates directly in App Store. In this case, you will need to purchase the updated version in the App Store so you can get further updates."
It's... I bought Logic Pro 9 + MainStage + + +++ .... in the Apple Retail Store and what now?? Updates works perfect in Snow Leopard.
I can't understand...
Can you help me please? =)Max,
Rest assurred, you will get updates via the App store. What will happen is when you install the box version, the Mac App Store will ping when there is an update to download(for free), much like any other Apple app(Garageband, iWork, etc) regardless of where you bought it from. If it's installed, it will check for updates.
If the Mac App store doesn't show an update that you know is out, simply down it directly from support.apple.com and apply it.
Hope this helps. If so, LIKE the post.
Glenn -
How to update the FB01L transaction using the FM bapi_acc_document_post
Hi All,
How to update the FB01L transaction using the bapi_acc_document_post but there is no ledger group field in the bapi function module.
Please help me how to do it.hi,
use batch input method for the same.
check this.
[https://forums.sdn.sap.com/click.jspa?searchID=19107237&messageID=884744] -
How to update the iTunes in the iPad using the I pad
How to update the iTunes in the iPad using the I pad?
Then you cannot update without Conecting to iTunes on a computer.
The Over the Air Feature is only available on iOS 5 or later.
You have iOS 4... See Here...
http://support.apple.com/kb/HT4972
OR...
Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch -
hello friends i have a problem in my ipod touch 3g it has 4.2.1 version of software but it doesnot supports any apps so how to update the ios 5 or more than this please anybody help me..i am in trouble.
I suspect you really have a 2G iPod. Those can only go to iOS 4.2.1.
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.
Otherwise connect to yor computer and update via iTunes. Yo need iTunes 10 or later on the computer.
To more easily find compatilbe apps for 4.2.1
iOSSearch - search the iTunes store for compatible apps.
Vintapps 3.1.3 - paid app.
Apple Club - filter apps by iOS version.
Discussion post by msgarmar - technique to sort apps by date. -
How to update the bucketset of business rules in MDS through Rules SDK
How to update the bucketset of business rules in MDS through Rules SDK.
Any sample code which will help me........ :)
Is it possible to expose a Business Rule as webservice which was created with the help of Java fact?
Edited by: 984804 on Jan 29, 2013 6:12 PMFYI, the output of this call returns something like:
<?xml version="1.0" encoding="UTF-8"?>
<queryplan>
<union>
<fullOuterJoin>
<statement index="1">SELECT 'FY' || to_char(SALES.invoice_date,'yy'), count( distinct SALES.inv_id) FROM SALES GROUP BY 'FY' || to_char(SALES.invoice_date,'yy')</statement>
<statement index="2">SELECT 'FY' || to_char(SALES.invoice_date,'yy'), sum(INVOICE_LINE.nb_guests) FROM SALES, INVOICE_LINE, SERVICE_LINE, SERVICE WHERE ( SALES.INV_ID=INVOICE_LINE.INV_ID ) AND ( INVOICE_LINE.SERVICE_ID=SERVICE.SERVICE_ID ) AND ( SERVICE.SL_ID=SERVICE_LINE.SL_ID ) AND ( SERVICE_LINE.service_line = 'Accommodation' ) GROUP BY 'FY' || to_char(SALES.invoice_date,'yy')</statement>
</fullOuterJoin>
<fullOuterJoin>
<statement index="3">SELECT 'FY' || to_char(SALES.invoice_date,'yy'), count( distinct SALES.inv_id) FROM SALES GROUP BY 'FY' || to_char(SALES.invoice_date,'yy')</statement>
<statement index="4">SELECT 'FY' || to_char(SALES.invoice_date,'yy'), sum(INVOICE_LINE.days * INVOICE_LINE.nb_guests * SERVICE.price) FROM SALES, INVOICE_LINE, SERVICE WHERE ( SALES.INV_ID=INVOICE_LINE.INV_ID ) AND ( INVOICE_LINE.SERVICE_ID=SERVICE.SERVICE_ID ) GROUP BY 'FY' || to_char(SALES.invoice_date,'yy')</statement>
</fullOuterJoin>
</union>
</queryplan> -
How to update the second JComboBox according selection in first JComboBox??
I am having a hard time to update the second JcomboBox according to the selection of the first JcomboBox. For example, the content of the first JcomboBox is {city, rent}. When "city" is selected, the content of the second JcomboBox should be set to a number of cities. When "rent" is selected, the content of the second JcomboBox should be set to a range of rent.
Since I have to detect the selection in actionperformed(), where the JcomboBoxes have been added to a Panel, and my JFrame setContentPane() to this Panel, I don't know how to update the JFrame or the Panel. I can make the old JFrame disappear and a new JFrame appear instead, but this is not what I want. I tried method update(Graphics) and removeAll(), and never made it work.
I would greatly appreciate if anyone could give me any help.Thanks for your response. I fixed the problem in the following clumsy way:
frame.getContentPane().remove(mainPanel);
mainPanel.remove(box2);
if(box1.compareTo("city")==0)
box2 = new JComboBox(cities);
else if(box1.compareTo("rent")==0)
box2 = new JComboBox(rents);
else if(box1.compareTo("type")==0)
box2 = new JComboBox(types);
box2.setBounds(305, 30, 90, 20);
mainPanel.add(box2);
frame.getContentPane().add(mainPanel);
Maybe there is a better way, but I don't know, and I don't understand your suggestion, could you further explain it? Thanks a lot.
lz22 -
How to update the posted documents with Business Area wise
Dear experts
Please suggest me how to update the posted documents with Business Area wise
Ajeesh.s
Moderator message: please do more research before asking, show what you have done yourself when asking.
Edited by: Thomas Zloch on Nov 2, 2011 2:26 PMHi,
Select all your folders in Disco Administrator,ALT+ENTER to go to properties, then change the database from the default database to the remote database.
Hope that helps,
Rod West -
can anyone help me update my software for a blackberry curve 9300. i need to updat the core applications and the system software but i dont know how to do so. do i do it by my desktop or device
Hi and Welcome to the Community!
The simplest way is this:
KB16068 How to update the BlackBerry Device Software through the web
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Maybe you are looking for
-
They're in a folder on my computer, show up in playlists and in the library itself. But when I sync, no dice? Help?
-
Trying to setup systemd user instance
Hi guys! For the past few days I have been trying to setup systemd to run a user instance (user is 'hans'). Sadly, I have been unable to find a lot of detail in doing this, so much of my work has been trial and error. Just recently I learned about th
-
How do I request a song to be put on ITunes to buy. I have tried all the 'support' places and can't find a place to do this. I saw one once before but can't find it now.
-
CS3 Help with logo - Glassy logo from flat dull logo
I have a well established logo for my business that I want to modernise without loosing the look and wanted to make it look glassy - I have been googleing for various suggestions and was hoping for someone to point me in the right direction! Thanks i
-
Calculating subtotals and grand totals in a report without grouping
I am trying to write a script in SQL Plus that will produce page totals on every 35 lines (that is, break on every 35 lines regardless of a data item). Also, I would like the report total to generate on the last page of the report. Thank you