How to update the Nokia 1520 using sd card

I have a Lumia 1520. I do not have a WiFi connedtion for phone updates. The first update I did was yesterday and I had to find a free wifi hotspot. I understand that you can do this via a computer to micro SD card to phone. How do I do this? I can find no guide to tell me how as I have searched this site, google and Nokia + Windows Phone sites and can find nothing. I 'think' I can down load latest updates to my computer and move it to a SD card but how do I get the phone to run/install the update.
A how to guide would be nice for this as its inconvienent to search out wifi hotspots all the time.
Thanks again for any help! 
Solved!
Go to Solution.

http://discussions.nokia.com/t5/Nokia-Lumia/Several-questions-about-Lumia-1520/m-p/2379301#M88118
The silence will fall

Similar Messages

  • How to update the FB01L transaction using the FM  bapi_acc_document_post

    Hi All,
            How to update the FB01L transaction using the bapi_acc_document_post but there is no ledger group field in the bapi function module.
    Please help me how to do it.

    hi,
    use batch input method for the same.
    check this.
    [https://forums.sdn.sap.com/click.jspa?searchID=19107237&messageID=884744]

  • How to update the ztable by using table handling function

    how to update the ztable by using table handling function
    It is very urgent ...............................
    thanks in advance

    see the  below code for the direct   ztable update
    Report  ZUPDATE_PRPS.
    tables: zprps.
    parameter: p_wbs like zprps-pspnr,
               p_value like zprps-fakkz default 'X'.
    data: wa_fakkz type zprps-fakkz.
    *START-OF_SELECTION
    start-of-selection.
    call function 'CONVERSION_EXIT_ABPSP_INPUT'
         exporting
             input     = p_wbs
        importing
             output    = p_wbs
        exceptions
             not_found = 1
             others    = 2.
    select single fakkz
      into wa_fakkz
      from zprps
    where pspnr eq p_wbs.
    if sy-subrc eq 0.
       update zprps set fakkz = p_value where PSPNR eq p_wbs.
       if p_value is initial.
         message i999(za) with 'Billing element field has been unchecked'.
       else.
         message i999(za) with 'Billing element field has been checked'.
       endif.
    else.
      message i999(za) with 'WBS element not found'.
    endif.
    reward  points if it is usefull .....
    Girish

  • How to update the Nokia Store

    how to update my nokia store ovi
    Moderator's note: We have amended the title of this post as it was moved from another board.

    Hi samuelbudol,
    Welcome to the Nokia Support Discussions!
    What's your phone model? For Symbian devices, you can update your Nokia Store by visiting www.store.nokia.com using the phone browser. It will prompt you if there's an updated version available for download. If your device supports Nokia Suite, you can use this PC application to check and download the latest update for your phone applications including the Nokia Store.
    If this does not solve your concern, please let us know.

  • How to Update the driver of your graphics card

    When I open Photoshop CC, I get this message:
    "3D features require a minimum of 512MB of vRAM. Photoshop has detected less than that on your system. Updating the driver of your graphics card may resolve the issue."
    I went to the website they recommended but found nothing about this. How can I determine if this is the problem? How do I find out how much vRAM I have? How do I update the driver of my graphics card?

    You cannot upgrade the GPU except by buying a newer model with a better GPU. Normally, with shared RAM the GPU will have a maximum of 384 MBs of VRAM with 4 GBs of installed RAM. That will increase by about 128 MBs per 2 GBs of additional installed RAM.

  • How to update the datasource 0CRM_LEAD_H using the BWA1 t-code from CRM

    Hi all,
    I would like to know how I can update the extractor 0CRM_LEAD_H from BWA1 t-code in CRM.
    If I see the datasource thru RSA5 the extract structure doesn't have the STATUS_LEAD field. but thru BWA1 I see the field in the extract structure, and the field has an "A" in the Selection column and I can't change it, the values could be:
    Field Attribute     Short Description
    A          Field in OLTP and BW Hidden by SAP
    M          Selection Required, Visible
              No Selection Possible, Visibility Set
    P          Selection Adjustable, Visibility Set
    X          Selection Adjustable, Visibility Set
    1          Pure Selection Field, Selection Set
    2          Pure Selection Field, Selection Set
    3          Selection Adjustable, Visibility Adjustable
    4          No Selection Possible, Visibility Adjustable
    The field is not In the Mapping tab.
    Do you know how I can include the field in the extraction?
    Regards, Federico

    In CRM badis are only used to do enhancement either for EEWB or enhancements (with filter or non filter).
    Still the standard exits (EXIT_SAPLRSAP_001,..004) can be used for populate the appened extract structure.
    How ever you can apply some tricks to make a dynamic call to function module.. or class methods (as the subroutine call are not advisable in OOPs concept)..
    Thanks,
    -J

  • How to update the COST column using another table's column

    Dear All,
    I have table:
    table parts: pno, pname, qoh, price, olevel
    table orders: ono, cno, eno, received, shipped
    table odetails: ono, pno, qty
    view:orders_view: ono, cno, eno, received, shipped,sum(qty*price)order_costview:odetails_view: ono, pno, qty, (qty*price)cost
    after I update the price in parts, I need to update COST and ORDER_COST too. The orders_view does not have pno, qty, and price, the odetails_view does not have price, how can I update the COST and ORDER_COST. Please help and Thanks in advance!!!
    I wrote the update the price in parts:
    create or replace procedure change_price(ppno in parts.pno%type, pprice in parts.price%type) as
    begin
        update parts
        set price = pprice
        where pno = ppno;
    end;
    show errorsthis procedure works fine.
    I wrote the trigger:
    create or replace trigger update_orders_v
    after update of price on parts
    for each row
    begin
        update orders_view
        set order_cost = sum(parts.(:new.price)*parts.qty)
        where parts.pno = :new.pno;
    end;
    show errorsIt gives me:Errors for TRIGGER UPDATE_ORDERS_V:
    LINE/COL ERROR
    3/5 PL/SQL SQL Statement ignored
    4/22 PL/SQL ORA-00934: group function is not allowed hereplease help!

    You could add the columns to the tables and then you would need a trigger to update those columns. However, you could just as easily select the price * qty to get the cost, without creating an additional column or trigger. I have no idea what you might want to do with a global temporary table. I think you need to explain what your purpose is, before any of us can suggest the best method. Since I have already demonstrated an update with a view, I will demonstrate an update with the cost column added to the odetails table and a trigger as you asked about. Notice that you will need triggers on both tables, the one that has qty and the one that has price.
    scott@ORA92> create table parts
      2    (pno    number(5) not null primary key,
      3       pname  varchar2(30),
      4       qoh    integer check(qoh >= 0),
      5       price  number(6,2) check(price >= 0.0),
      6       olevel integer)
      7  /
    Table created.
    scott@ORA92> create table odetails
      2    (ono    number(5),
      3       pno    number(5) references parts,
      4       qty    integer check(qty > 0),
      5       cost   number,
      6       primary key (ono,pno))
      7  /
    Table created.
    scott@ORA92> create or replace procedure change_price
      2    (ppno   in parts.pno%type,
      3       pprice in parts.price%type)
      4  as
      5  begin
      6    update parts
      7    set    price = pprice
      8    where  pno = ppno;
      9  end;
    10  /
    Procedure created.
    scott@ORA92> create or replace trigger update_cost1
      2    after insert or update of price on parts
      3    for each row
      4  begin
      5    update odetails
      6    set    cost = qty * :new.price
      7    where  pno = :new.pno;
      8  end update_cost1;
      9  /
    Trigger created.
    scott@ORA92> show errors
    No errors.
    scott@ORA92> create or replace trigger update_cost2
      2    before insert or update of qty on odetails
      3    for each row
      4  declare
      5    v_price parts.price%type;
      6  begin
      7    select price
      8    into   v_price
      9    from   parts
    10    where  pno = :new.pno;
    11    --
    12    :new.cost := :new.qty * v_price;
    13  end update_cost2;
    14  /
    Trigger created.
    scott@ORA92> show errors
    No errors.
    scott@ORA92> insert into parts values (1, 'name1', 1, 10, 1)
      2  /
    1 row created.
    scott@ORA92> insert into odetails values (1, 1, 22, null)
      2  /
    1 row created.
    scott@ORA92> -- starting data:
    scott@ORA92> select * from parts
      2  /
           PNO PNAME                                 QOH      PRICE     OLEVEL
             1 name1                                   1         10          1
    scott@ORA92> select * from odetails
      2  /
           ONO        PNO        QTY       COST
             1          1         22        220
    scott@ORA92> -- update:
    scott@ORA92> execute change_price (1, 11)
    PL/SQL procedure successfully completed.
    scott@ORA92> -- results:
    scott@ORA92> select * from parts
      2  /
           PNO PNAME                                 QOH      PRICE     OLEVEL
             1 name1                                   1         11          1
    scott@ORA92> select * from odetails
      2  /
           ONO        PNO        QTY       COST
             1          1         22        242
    scott@ORA92> -- select works without extra cost column or trigger:
    scott@ORA92> select o.ono, o.pno, o.qty, (o.qty * p.price) as cost
      2  from   odetails o, parts p
      3  where  o.pno = p.pno
      4  /
           ONO        PNO        QTY       COST
             1          1         22        242
    scott@ORA92>

  • How to update the Weekly data using BAPI for MD61

    Hi All,
    i have used two BAPI's in my Z program to upload data from flat file to sap-system (BAPI_REQUIREMENTS_GETDETAIL and BAPI_REQUIREMENTS_CHANGE) and i uploaded the Monthly Data from the flat file on sap system successfully.
    but i have to also upload the Weekly Data on the sap system using BAPI.
    is there any BAPI for the same or what can be the solution for the uploading weekly data on sap system ?
    Please reply me.
    Thanks in advance..
    Edited by: Prajapati_Shyam on Dec 29, 2010 4:19 PM

    Hi Jovito,
    thanks for your reply,
    i developed a Z program to upload monthly data as well as weekly data into tcode MD61 by selecting the radio button weekly or monthly but i am not able to upload the weekly data as i didnt' get any BAPI OR any other logic to upload weekly data Or not able to use the existing BAPI BAPI_Requirement_create , because the upload file is in monthly format.
    MD61 tcode can be used for both data (Monthly or weekly data).
    can you suggesst me any BAPI to upload the weekly data or any other logic for the same
    thanks & regards
    Prajapati

  • How to update the sent mail using SO_NEW_DOCUMENT_ATT_SEND_API1

    I have a requirement to update/ append the sent mail like a trail.Since i am sending mails using SO_NEW_DOCUMENT_ATT_SEND_API1, how can i update new contents to sent mails using this RFC???Please help me.

    you may have to store content of each time mail send then only, you can send with history.

  • How to update the database table using webdynpro??

    Hi,
    Can anybody helm me in updating database table....by entering the values on the output screen of webdynpro component??should i use any commit statement in function module ,which i used to update.

    hi martina....
    consider you are having two input fields bound to attr1 and attr2.
    now after pressing the save button:
    just read teh two attributes to field1, field2 using code wizard. then
    <db name>-<fieldname1> = <field1>.
    <db name>-<fieldname2> = <field2>.
    insert <dbname>.
    ---regards,
       alex b justin

  • How to update the data in sqlserver table using procedure in biztalkserver

    Hi,
    Please can any one answer this below question
    how to update the data in sqlserver table using procedure in biztalkserver
    while am using executescalar,typedprocedure getting some warning
    Warning:The adapter failed to transmit message going to send port "SendtoSql1" with URL "mssql://nal126//MU_Stage2?". It will be retransmitted after the retry interval specified for this Send Port. Details
    Please send me asap....
    Thanks...

    Hi Messip,
    A detailed error would have helped us to answer you more appropriately but
    You can follow the post which has step by step instructions, to understand how to use Stored Procedure:
    http://tech-findings.blogspot.in/2013/07/insert-records-in-sql-server-using-wcf.html
    Maheshkumar
    S Tiwari|User
    Page|Blog|BizTalk
    2013: Inserting RawXML (Whole Incoming XML Message) in SQL database

  • How to update the iTunes in the iPad using the I pad

    How to update the iTunes in the iPad using the I pad?

    Then you cannot update without Conecting to iTunes on a computer.
    The Over the Air Feature is only available on iOS 5 or later.
    You have iOS 4... See Here...
    http://support.apple.com/kb/HT4972
    OR...
    Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
    See the Using iTunes Section Here...
    How to update your iPhone, iPad, or iPod touch

  • How to update the ztable using screen.

    hi experts,
    i have one ztable with 8 fields
    and i created one screen with 8 fields
    how to update the ztable using this screen menas when i press the some push button in my screen the table should update.
    Devi

    hi
    check the link shown below
    Coding & screen shots of how to update a database table from screen(Module poool)
    http://www.scribd.com/doc/15628693/moduleprog090311165111phpapp011
    in the attachment u will find
    data  : begin of i_ysrtmm occurs 0,
            sno type ysrtmm-sno,
            sname type ysrtmm-sname,
            scity type ysrtmm-scity,
            sedu type ysrtmm-sedu,
            spercent type ysrtmm-spercent,
            select(1),
            end of i_ysrtmm.
    in the SE51 click on layout & in that menu goto - secwindow- enter the internal table i_ysrtmm
    and click on get from program.u will get all the fields of the internal table select all of them except
    SELECT  field  and then drag and drop on table control . double click on the table control u see the attributes screen there in the w/colselect enter i_ysrtmm-select for tab selection of table control.
    Regards

  • How to update the Ztable using modulepool Tablecontrol...

    Hi All,
    could anyone help me how to update the Ztable using modulepool Tablecontrol...
    if it is possible give me a example with code..
    Many thanks in advance...!!
    Rajesh

    Hi,
    For that pls refer to the link:
    http://help.sap.com/saphelp_nw70/helpdata/en/9f/dbac3735c111d1829f0000e829fbfe/frameset.htm
    Also refer the sample program:
    RSDEMO02
    Then for updating:
    modify the internal table(which u used to populate the tabcntrl) from the table control.
    Then update database table like:
    update dbtab from table itab.
    Regards,
    Renjith Michael.

  • How to Update the oracle toad column value in table by using SSRS 2008

    Hi Team,
    How to update the oracle DB table column value by using SSRS 2008.
    Can any one help me on this.
    Thanks,
    Manasa.
    Thank You, Manasa.V

    Hi veerapaneni,
    According to your description, you want to use SSRS to update data in database table. Right?
    Though Reporting Services is mostly used for rendering data, your requirement is still can be achieved technically. You need to create a really complicated stored procedure. Pass insert/delete/update and the columns we need to insert/delete/update as
    parameters into the stored procedure. When we click "View Report", the stored procedure will execute so that we can execute insert/delete/update inside of the stored procedure. Please take a reference to two related articles below:
    Update Tables with Reporting Services – T-SQL Tuesday #005
    SQL Server: Using SQL Server Reporting Services to Manage Data
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

Maybe you are looking for