How to update to ios6 when "could not establish a secure connection to the device" message appears with Jailbroken iPhone 4

Hi all,
I've been trying to update my Jailbroken iPhone 4 to ios6 but, unfortunately, I keep getting the "could not establish a secure connection to the device" when connecting it to iTunes. I've tried updating "over the air" but this flags up an error too. Finally, I can't restore to a previous backup because, the backups I previously had, were stored on my old (broken) computer.
CAn anyone help? Any suggestions would be greatly appreciated!
Thanks,
Rakesh.

You jailbroke your phone.
Only google may help now.
You'll find no help here.
If Haiku you don't like,
Then to Google you should hike,
You jailbroke your phone,
Now on these forums you are alone,
'Tis a day of no cheer,
For we cannot help here.
In non-poem; You jailbroke your phone, which is not support by Apple, meaning updates will not work on it as they would if you were running official software.
As per the ToC for the device, and for these Discussion Boards (both you agreed too), you will not get support either from the discussion board, or from Apple directly.
Your best bet is to Google for help and learn a valuable lesson; Jailbreaking can definitely brick your phone.

Similar Messages

  • Hotspot login cannot open the page because it could not establish a secure connection to the server.

    I am trying to connect to a public wifi network.  My iPad connects marvoulesly.  My iPhone not so much.  I have an iPhone 4 and everytime I go to connect, it goes to a pop up page where I'm supposed to click a link to adhere to their TOS.  When I get the pop up page I get "Hotspot login cannot open the page because it could not establish a secure connection to the server"
    I've reset the network settings and nothing changed.  Same error message.  Any tips or tricks to fix this?  I'm laid up on bed rest in the hospital and would really rather that I not use all my data minutes...
    Thanks!

    Updated to iOS6 on an iPhone 4 this morning, and now when I attempt to connect to my work wireless, it connects for a moment then attempts to popup some login page (I sometimes get the hotspot login error you've mentioned) and because the page doesn't exist I can't get connected to the wireless netowrk.
    What the heck have apple broken in this update?
    Why when joining a normal wireless network is my phone even going near a Login page? What is this and how do I disable it?
    Oh, and I'm posting here because your suggestions of disabling the Wi-Fi and Cellular data netowkrs doesn't solve the problem.
    [Edit: seems while typing this leaving the cellular data disabled, it's now letting my join wireless - seems to be some timeout on it fixing the issue - I'd still like to know what this login page is it's attempting to locate is for.]
    -A

  • Cannot open page Safari cannot open the page because it could not establish a secure connection to the server

    Hello Apple Experts!!
    I Am Surendra and very new to this forum.. I just came across a problem with my Iphone while connecting to my company WIFI.. we are using Web authentication.. meaning..
    The user will try to connect to the wireless network, the client will get the IP address and they are forced to open up the browser to provide the USERNAME and the PASSWORD on the webpage, once they pass the auth they will be able to access to the internet.
    The WEB PAGE that asks for the USERNAME and the PASSWORD is HTTPS and for some reason that page is not at all opening and i am getting the below error.. If i disable HTTPS on the cisco Device the IPHONE works great..
    Cannot open page Safari cannot open the page because it could not establish a secure connection to the server
    This is happening only on the OS 5 and on the OS 4 everything works just great!!
    I have a feeling that this has to do something to do with HTTPS / SSL connection with the IPHONE SAFARI or OS 5
    Am connecting to Cisco Wireless LAN COntroller and the access point acting as the WIFI devices..
    Any help on the same will be much appreciated!!
    Regards
    Surendra

    I'm having a similar issue.  Connecting on my iPad FROM ANYWHERE to my work's domain results in the message by the OP.
    I checked the ciphers enabled by their page, and this was returned:
      High Strength Ciphers (>= 112-bit key)
        SSLv3
          EDH-RSA-DES-CBC3-SHA       Kx=DH         Au=RSA     Enc=3DES(168)    Mac=SHA1  
          DES-CBC3-SHA               Kx=RSA        Au=RSA     Enc=3DES(168)    Mac=SHA1  
          RC4-MD5                    Kx=RSA        Au=RSA     Enc=RC4(128)     Mac=MD5   
          RC4-SHA                    Kx=RSA        Au=RSA     Enc=RC4(128)     Mac=SHA1  
        TLSv1
          EDH-RSA-DES-CBC3-SHA       Kx=DH         Au=RSA     Enc=3DES(168)    Mac=SHA1  
          DHE-RSA-AES128-SHA         Kx=DH         Au=RSA     Enc=AES(128)     Mac=SHA1  
          DHE-RSA-AES256-SHA         Kx=DH         Au=RSA     Enc=AES(256)     Mac=SHA1  
          n/a                        Kx=DH         Au=RSA     Enc=Camellia(128)  Mac=SHA1  
          n/a                        Kx=DH         Au=RSA     Enc=Camellia(256)  Mac=SHA1  
          DES-CBC3-SHA               Kx=RSA        Au=RSA     Enc=3DES(168)    Mac=SHA1  
          AES128-SHA                 Kx=RSA        Au=RSA     Enc=AES(128)     Mac=SHA1  
          AES256-SHA                 Kx=RSA        Au=RSA     Enc=AES(256)     Mac=SHA1  
          n/a                        Kx=RSA        Au=RSA     Enc=Camellia(128)  Mac=SHA1  
          n/a                        Kx=RSA        Au=RSA     Enc=Camellia(256)  Mac=SHA1  
          RC4-MD5                    Kx=RSA        Au=RSA     Enc=RC4(128)     Mac=MD5   
          RC4-SHA                    Kx=RSA        Au=RSA     Enc=RC4(128)     Mac=SHA1  
    This appeared to be a more than sufficient cipher list, yet my iPad won't load any page.  I highly doubt it's a problem with SSL2 not being enabled because SSL2 has been deprecated for awhile now.
    Any ideas?

  • TS1424 itunes could connect to this iphone could not establish a secure connection to this device

    itunes could not connect to this iphone could not establish a secure connection to this device

    Same problem with my iPhone 4S on iMac and MacBook Pro with OSX Mountain Lion
    iPod work fine...
    USB is connectet directly to computer not HUB.
    Battery is on 88%
    No updates available on App Store...
    God back Steve for few more years please

  • I'm trying to open the portal for our personal account in school but im getting "safari cannot open the Page because it could not establish a secure connection to the server"  how shall i fix this?

    But the way, im using ipad with ios 5.1.1

    No I can't open that site with Safari, but with Puffin Web Browser on my iPad I can open that site!
    http://itunes.apple.com/app/puffin-web-browser/id406239138?alreadyRedirected=1&m t=8

  • Clean Access Server could not establish a secure connection

    I have a OOB Real IP GW setup on v4.1.2
    I seem to have a problem with the CAS connecting to the CAM although I have added the CAS to the CAM and can manage the CAS from the CAM.
    I noticed while troubleshooting client authentication that the client was not being redirected to the logon web page and it had full access to the trusted network from the untrusted authentication vlan. I eventually figured out that if I change the CAS Filter Fallback method from Allow to ignore then it tries to authenticate the client. However the fact that the fallback is activated tells you that something is not right.
    I have 2 problems:
    A) The clients web page is redirected for authentication but it only lists the domain name in the URL and not the hostname or host IP. In the lab I do not have a DNS server and it would not help as it does not include the hostname in the URL anyway. How do I fix this or perhaps it's related to the 2nd problem.
    B) When I manually change the URL by replacing the domain name with the IP of the CAS (untrusted OOB Real IP GW) then I get the following error message when logging on:
    Network Error:
    Clean Access Server could not establish a secure connection to Clean Access Manager at mydomain.com.
    This could be due to one or more of the following reasons: 1) Clean Access Manager certificate has expired 2) Clean Access Manager certificate cannot be trusted or 3) Clean Access Manager cannot be reached.
    Please report this to your network administrator.
    I would guess the culprit is No 2 but surely the system can run on self signed certificates? I have an NTP server so time is in sync. I have even tried regenerating the cetificates on the CAM
    & CAS.
    Any ideas?

    To overcome problem B, I regenerated the SSL Certificates using the host IP address instead of the name for all the CAM & CAS appliances. This seems to have resolved this problem.
    I also SSH'd from each of the CAS's to each of the CAM's from the CLI and it then prompts to permanently store the certificates. I'm not sure it this was necessary though.

  • Network Error: Clean Access Server could not establish a secure connection to Clean Access Manager

    Hello everyone
    I am implementing a failover solution of NAC in OOB VG version 4.8, I have 2 CAS and 2 CAM.
    The Error I am getting is when I connect to both IP address and the FQDN of the CAS.
    ===========
    Network Error:
    Clean Access Server could not establish a secure connection to Clean Access Manager at camsrv3.cadivi.gob.ve.
    This could be due to one or more of the following reasons: 1) Clean Access Manager certificate has expired 2) Clean Access Manager certificate cannot be trusted or 3) Clean Access Manager cannot be reached.
    Please report this to your network administrator.
    ==========
    For the CAM's I use this names camsrv1 and camsrv2. then generate a CSR in the camsrv1 with the name camsrv3.mycompany.com corresponding  to virtual ip and it exported to camsrv2, Install the CA certificate of the company and everything works perfect.
    This is the failover configuration
    CAM:
    Primary:     10.1.206.248 camsrv1.mycompany.com
    Secondary: 10.1.206.249 camsrv2.mycompany.com
    Virtual:       10.1.206.250 camsrv3.mycompany.com
    Then I do exactly the same steps for the CAS's and this is the failover configuration:
    Primary:     10.1.216.248 cassrv1.mycompany.com
    Secondary: 10.1.216.249 cassrv2.mycompany.com
    Virtual:       10.1.216.250 cassrv3.mycompany.com
    Then I add the certificate of CAM in the CAS on the tab "Trusted Certificate Authorities"  and vice versa.
    The communication between all the CAM´s and CAS´s is correct (Primary, Secondary and Virtual). I can ping the IP and the FQDN and I can also manage the CAS through the CAM.
    I verify that the time was right in the CAM and the CAS and all good up there.
    Appreciate your help
    Eduardo Navas

    Eduardo,
    Bump up the CAS/CAS communications logging on both the CAS and CAMs, and then look in the log files for clues.
    On CAM they live in /perfigo/control/tomcat/logs and on CAS in /perfigo/access/tomcat/logs
    HTH,
    Faisal
    If you find this post helpful, please rate so others can find the answer easily

  • C4440 scan error Operation could not be completed (error 0x00000015​). The device is not ready.

    I have updated, restarted, etc. Sometimes when scanning I do not get this message, but more often I do.
    When scanning I receive the following message:
    Error message when scanning "Operation could not be completed (error 0x00000015). The device is not ready.
    Please help!!

    Hello, nylamama:
    Follow the steps in this document, and you should find the help you need to resolve the error.
    Let me know if this helps, and thank you for contacting HP!
    Cheers,
    SN_63 (Saint Nana): I work on behalf of HP.
    Click the thumbs up icon if you want to say "Thank you." To help others on the forum, select "Accepted Solution" on the post that solves your problem.

  • Scanner Operation could not be completed (error 0x00000015). The device is not ready.

    When trying to scan I keep receiving an error message.  Operation could not be completed (error 0x00000015).  The device is not ready.
    What does this mean?  I have been able to scan without problems in the pas, with Windows 7 Fax and Scan.
    Printer : HP PhotoSmart 2710
    Computer: HP Pavilion zd8000 (originally XP)

    Welcome to the Forum, losblanco,
    I checked on this for you and I think your answer is here:
    http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/operation-could-not-be-completed...
    If you don't find the solution there,
    or if you need help for any other reason,
    please come back and we'll take another shot at it!
    Good Luck!
    I hope this helps.
    Click The Kudos Star to say Thanks!       
    Set in Reply “Accept as Solution” if it’s fixed! 
    Kudos are Earned!
    Kind Regards,
    Dragon-Fur

  • The iphone could not be synced because connection to the iphone was reset

    Hello,
    I have an iPhone 5 and have upgraded from IOS 6 to IOS 7.  IOS 7 has been great unitl I just started getting the following error:
    "The iphone could not be synced because connection to the iphone was reset"
    I get this error, when I plug my phone in my mac.  After getting the error, the iphone does not connect to itunes, so the phone will not Sync with Itunes and will not charge.
    Please help!
    Thanks,
    Gary

    I recently posted about this problem already but Apple decided to ad hoc delete my comment because I did not speak favorably of Apple making a comment not to their liking which (was), 
    there is no support solution coming at all from Apple even though various individuals report the exact same or simlar problem here, including myself on Apple-sponsored community blogs.  
    Well, I took this problem into my own hands and was able to simply resolve the matter on my own, (I think):
    Under System Preferences / General / Reset....
    * "Reset All Settings" (first at the top in the list on that page).
    That seems to have resolved my issue with this nagging problem.
    "the iphone could not be synced because connection to the iphone was reset"
    At least so far I seem to not be getting this problem.  You will still keep all your data but it will reset your system's settings (i.e., multiple keyboard selection, et el).
    Hope this helps someone out there.

  • When I try to open a document from my file on Mac OS X the following message appears, with the Bluetooth logo: 'SELECT A BLUETOOTH DEVICE ....Select a device to send file ...' I then have to go to the source of the document, e.g. Pages, to open the file.

    When I try to open a document from my file on Mac OS X the following message appears, with the Bluetooth logo: 'SELECT A BLUETOOTH DEVICE ....Select a device to send file ...' I then have to go to the source of the document, (e.g. Pages), to open the file. Please could someone help?

    The Get Info dialog should look something like this:
    The "Change All" button should be at the bottom of the "Open With" section.  This is how it appears in Snow Leopard.  Other OSX versions many be slightly different.
    If something is changing the setting back to something else you may have a deeper problem than I am able to help you with.  What is appearing in the Open with area before you correct it?
    If the problem is still persisting, instead of double clicking on the file to open it, try right or control clicking and then select Open With and choose the proper app from the list.

  • I can no longer access facebook from my macair and when i try the following error message appears "unable to establish a secure connection to the server.

    I have had no issue accessing Facebook in the past using my MacAir.  Last night each time I would try and access the page, an error message would appear, saying that unable to establish a secure connection to the server "www.facebook.com"".  The problem continues this morning.  I have not updated any software or made any changes.  One minute it was working, the next it was not.  I do not have any parental controls; I have deleted the cookies; and I have reset safari.  I can access all other websites that I have tried.  I am using Version 6.0.4.

    From your Safari menu bar click Safari > Preferences then select the Privacy tab.
    Click:  Remove All Website Data
    Then delete the cache.
    Now open a Finder window. From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following
    ~/Library/Caches/com.apple.Safari/Cache.db
    Click Go then move the Cache.db file to the Trash.
    Quit and relaunch Safari to test.
    If nothing above helped, troubleshoot Safari extensions.
    From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
    If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
    If it's not an extensions issue, restart your internet modem and router.  Then quit and relaunch Safari and try Facebook.

  • I use Ipad 2. After updating to ios6 facebook is not opening . everytime i click on the icon it cannot connect with the server. Also Appstore

    I use IPAD 2 wifi only 16gb version. After updating to IOS 6.0.1, the facebook started to work significantly slow ( whereas safari is working with average 5.0mbps speed). So i deleted the facebook application & again downloaded it from app store. Now the app is not being able to connect to the network any more. Also Appstore, maps run very slow after the update. Plz suggest any remedies .....

    Try a reset:
    Hold the Sleep and Home button down for about 10 second until you see the Apple logo.

  • I'm having a problem accessing Bupers Online using my CAC reader. I get an error that says safari can't establish a secure connection to the website. Does anyone know how to fix this?

    I am having a problem accessing Bupers Online on OS X Mountain Lion. I get an error that says Safari cant establish a secure connection with Bupers Online. Does anyone have any tips to access Bupers?

    I don't use CAC certificates, but since updating to 10.9.3, I too am getting the same error, BUT only with some HTTPS sites (e.g., https://webmail.pairlite.com), not all. Meanwhile, Firefox (was 12.0, now 29.0.1) connects with no issue.
    I too have verified date/time is set automatically, checked for (and fixed) disk integrity errors and permissions, and rebooted, all to no avail.
    Update:
    Well...heck. Tried accessing the problematic site via the Guest account, and that WORKED. So...back to the drawing board.

  • TS1492 While Syncing my phone it get hung up attempting to connect to the iTunes store.  Trouble-shooting states that I do not have a secure connection to the iTunes store.

    While syncing my phone, it get stuck at step 3 while connecting to the iTunes store.  Trouble-shooting states that I do have an internet connection but not a secure connection to the iTunes store.

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

Maybe you are looking for