How to update to Windows 7 after reinstall system from recovery disk of Vista

Hi, Please I need your help, I have a Satellite L500, When I bought it came with VIsta, and complimentary update to Wiindows 7, after they release to the market. I had to reinstall my system with the recovery disk I had created, but I discover that Vista is working, and I can not find the way to update again to Windows 7. Do you know how to solve the problem.
Thanks

Please try the following:
KB2845626 - Cached credentials are not updated when you change your password in Windows
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

Similar Messages

How long should it take to reinstall mavericks from Recovery Disk?

8 GB OF RAM onboard.

It depends on your internet connection. Mine is DSL 7 mbps and it takes +/- 2.5 hours to download the entire + 5 GB installer and then up to 30 minutes to install. Slower connection = will take longer.

On reinstalling system from recovery image

Just pondering what lenovo's advice is {regarding the ad/malware pre-installed on our new laptops,which by now we've all decontaminated} should a user suffer a catastrophic system failure and need to reinstall the system via recovery partition?I assume in this scenario,one would again reload our superfishy friend and have to start working on removal yet again?Does it seem reasonable to hope lenovo may feel moved to offer all affected/infected customers a clean recovery image?Say via a download link-or better still an image on removeable media?

If you do an OKR backup now then that backup is free of the adware. However, if you do a factory restore that adware is still there. But once you start and update Windows Defender it should also be removed.

How to restore iTunes library after operating system changed?

How to restore iTune library after operating system changed on the laptop? The syn is not working because it doesn't recognize the computer.

Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
Sync Your iOS Device with a New Computer Without Losing Data - How-To Geek

How to backup i photo after reinstall pls

how to backup i photo after reinstall pls

Drag the entire library to a volume on an external drive formatted as Mac OS Extended, or use Time Machine.
(124054)

My computer keeps saying that itunes is not working so i updated my windows and reinstalled itunes but it still doesnt work what do i do?

my computer keeps saying that itunes is not working so i updated my windows and reinstalled itunes but it still doesnt work what do i do?

This link will give service options for your Country ,select from drop down menu
http://support.apple.com/kb/index?page=servicefaq&geo=United_Kingdom&product=iph one
To troubleshhoot restore see document below
http://support.apple.com/kb/HT1808

TS4009 how do you retrieve information after the system has been reset to default

how do you retrieve information after the system has been reset to default?

From a backup on itunes or icloud, assuming you have made backups. Connect to itunes and in the first tab for your device, choose to perform a restore.

HOW DO I UNINSTALL WINDOWS 8.1 PREVIEW FROM MACBOOK PRO (SNOW LEOPARD)... CAN NOT FIND README FILE FOR WINDOWS PREVIEW. PLEASE HELP

how can i uninstall windows 8.1 preview from my macbook pro?? ive looked for over an hour for the readme file for the windows 8.1 preview and have had no luck. ive done almost everything i can think of at the moment and nothing is working. somebody please help, thanks

Windows 8.1 Preview cannot be uninstalled. However, if what you want is to remove Windows completely, start up in OS X, open Boot Camp Assistant (in /Applications/Utilities) and follow the steps to remove the Windows partition.
If what you want is to install the final Windows 8.1 version, read this Microsoft support article > http://windows.microsoft.com/en-us/windows-8/update-from-preview

Still running adobe cs2 on leopard. but now get unexpected quit msg. and wont launch. any chance that when i installed then uninstalled GENIEO yesterday something went wrong? how to fix? can i reinstall cs2 from original discs? by stephenftlaud

still running adobe cs2 on leopard. but now get unexpected quit msg. and wont launch. any chance that when i installed then uninstalled GENIEO yesterday something went wrong? how to fix? can i reinstall cs2 from original discs? bystephenftlaud

Hi,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Open Console in Applications>Utilities & see if there are any clues or repeating messages when trying to open CS2.

Still running adobe cs2 on leopard. but now get unexpected quit msg. and wont launch. any chance that when i installed then uninstalled GENIEO yesterday something went wrong? how to fix? can i reinstall cs2 from original discs?

still running adobe cs2 on leopard. but now get unexpected quit msg. and wont launch. any chance that when i installed then uninstalled GENIEO yesterday something went wrong? how to fix? can i reinstall cs2 from original discs?

Hi,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Open Console in Applications>Utilities & see if there are any clues or repeating messages when trying to open CS2.

OneKey Recovery 6.0. Problem with back up operating system from recovery cd'ies

Hello, i have problem with back up operating system from recovery cdies.
When i acceped start button to backup partition system i get an alert "space not enough"
I had linux before and i whant change it to windows back. i deleted all ext partitions. I have all unlocated space.I shouldnt have problems.
Please help me

I would use something like Partition Magic or Acronis Disk Director to first create a FAT32 partion for your C: Drive where your OS will go and be sure to leave 10GB or so unallocated for the secondary FAT32 Partition where your "factory image" will go.
You then create a Logical Drive with the unallocated space and make it hidden (PM or ADD will do this). Install your OS (preferably Windows XP if you want less problems) and then after you have setup everything the way you want (drivers, applications, etc), then use Acronis True Image to create your "factory restore" image on the hidden partition and activate the Startup Recovery Manager.
This is the way I do it and it works like a charm!

Anyone know how to get a copy of a IBM 7845I2 Recovery Disk?

Anyone know how to get a copy of a IBM 7845I2 Recovery Disk?, My multipoint switch is stuck in read only mode - Please use Recovery Disk to check the file system using fsck.

Hello Elizabeth,
Did you read the title of my post? I am simply asking if anyone knows how to pull a history of repair records.
This page https://www22.verizon.com/secure/pages/requestrepair/ clearly states "You can view a history of past repair requests." Unfortunately, I cannot find anywhere on that site where one can do that. So, I am asking for user to user help on finding out how to gain access to that information.

How to update the windows cached password after SSPR?

Scenario: Windows 7 remote user forgets the cached password for her laptop and uses FIM 2010 R2's Reset Password invoked from the login screen. The domain password change is successful, but the user still cannot login to the laptop as the
cached password has not been updated.
Question: How to update the cached windows logon password after SSPR to allow user to login with the new password.
Thanks

Please try the following:
KB2845626 - Cached credentials are not updated when you change your password in Windows
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

How to repair corrupt \windows\system32\config\system files?

T61 will not boot to Win XP - says the \windows\system32\config\system file is missing or corrupt.
BIOS hardware test of disk drive passes. When I place a Microsoft Win XP disk to attempt a repair, the message says there is no disk drive detected. I assume this is due to unique Lenovo HDD drivers that are not on the Microsoft disk.
Is there a way to repair this file(s) without doing a full HDD reformat?
THank you.

You need to include the Intel Matrix Storage manager via Floppy disk while running setup-CD or change in BIOS "Config"-SATA" to compatibility.
Then you can repair windows but first backup the hard drive onto annother disk f.ex with Acronis True Image Home (Emergency CD).
Boot from XP Retail-CD
`select "Install"
select the drive with the found windows installation and "Repir"
Windows Setup removes the system files and replaces them from CD
after systemreboot you willneed to re-install all patches and updates
My home-forum: http://www.thinkpad-forum.de
Wiki: Deutsches ThinkPad-Wiki English ThinkWiki
My ThinkPad-Collection

How to popup message window after logon?

Is it possible to popup a message window after ERP user log on?

Jerry,
This is very extensive, but you can always use WHEN-NEW-FORM-INSTANCE event with out any form to inform users. But it can get annoying without this lenghy explanation. It depends on how long you wait before you take down the server after you announce.
It is not the perfect way of doing it, but will work (in forms only when a
new form is opened, not in JSPs).
1. Create a table with some columns like instance_id, maintenance date and
contact details just in case they want to call you, and a flag that
represents the status (in process, completed so on)
2. Create a simple workflow process with three nodes in that.
3. Whenever you want bring the server down, just create a process for this
workflow process (WF_ENGINE.create_process). This will insert row into this
table first time.
4. Next step in the process can update the status to Completed after say, 1
min (assuming users take at least a min to finish any transaction in one
form)
5. Have a timeout in the same workflow that will wait for 5 mins and inserts
one more row similar to the first third step.
6. Write a small piece of code in custom.pll in WHEN-NEW-FORM-INSTANCE which
is not form specific. Which means whenever a new form is opened up this
message will appear. This code reads this table and looks at the status
(till it is completed) to pop up a message whenever they open a new form.
Inactive users, I assume you do not care.
7. You can check in the workflow how many times you want to insert a row
into the table and send a pop up message (select instance_Id,count(*) from
dummy where count(*)=5 if you want five tries).After five tries you can
complete the workflow.
Thanks
Nagamohan

How to update to Windows 7 after reinstall system from recovery disk of Vista

Similar Messages

Maybe you are looking for