How to update Unicode in my Win 7 PC?

Hi, How can I update Unicode to 6.3.0 in my Win 7 PC to get new characters?

Maybe here.
http://www.unicode.org/versions/Unicode6.3.0/
Might ask them over here.
Windows 7 on Microsoft Answers
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Similar Messages

Many Questions; Main: How to update to Mavericks in 2015?

Hello everyone!
I'm currently trying to install Wine on my Mac so I can run some old Windows games without having to install Windows. It proves more difficult than I imagined though...
They want me to install a program called "Xcode" from the App-store, but I run a MacBook Pro OS X 10.8.5, and the program says I have to run at least 10.9 to download it - so basically I have to update to Mavericks. I never did so because my father told me not to, and he did so too with the newest update Yosemite. And after reading all the reviews to it - yeah, i still want to be able to log into my wifi thank you very much. So i'm trying to find out how to update to Mavericks in 2015 - so far I didn't find anything Does anyone here have an idea? Or maybe can propose an alternative to Xcode?
Thank you very much!
Your Mia

I just found someone who had a similar question (it didn't pop-up when i searched for it) and the answer seems to be: suck it, no mavericks for you.
I don't know how to delete this post though, so just see it as closed…

MFE v 2.10 how to updat for N86 8MP

Greetings from Sydney,
I have a N86 8MP with software updated to v20.115 installed. Mail for Exchange (MFE) is showing as v 2.1.0. (from about) I have tried to update via the applications tab and nothing is available.
With v2.1.0 I do not have the option available for Out of Office or to set Flag status for e-mail.
I have tried to install 2.9.158 for S60 v3 but it comes up 'update error'.
Does anyone know how to update MFE on this mobile?
Thank you

smileys are cool but too many are bad
whats wrong with win xp? its the most stable version i've ever used.
it also sounds to me like you are asking questions here because you are being ill-advised
if you have two hard drives you want to install, load up win xp and partition and format them both
if you want to keep data off the one drive, format the other and keep it; win xp works with both NTFS and FAT32 partitions, so if you keep it as a FAT32 disk and don't format it, win xp will still be able to read it if it is connected as a slave drive
and as for whoever advised to buy a PCI controller card, this is the 21st century!! all motherboards have IDE controllers now!! i remember the old 486 days with the E-IDE VLB controller cards, now thats going back a bit!

How to update database table !!!

hi all,
Please advice how to update database table with certain cndition needs to be checked.
Please consider below scenario.
have used enqueu and dequeue function to lock entries and also i have used BAPI so considering that return parameter . i want to update table
/tdk/st0027.
1. I want to update database table
2. there are certain condition needs to be checked like ,
   loop at it_final into wa_final.
th_return-type = 'S'.
           if th_final-vbeln = /tdk/st0027-vbeln and
              th_final-posnr = /tdk/st0027-posnr and
              th_final-etenr = /tdk/st0027-sdslno.
above condition which i need to check .and need to append below system fields need to be appended in table.
          th_final-prstsind = '20'.
          th_final-chgdate = g_date.
          th_final-chgtime = g_uzeit.
          th_final-chgprog = g_cprog.
          th_final-chguser = g_uname.
          append th_final to td_final.
          update /tdk/st0027 FROM th_final.
          endif.
endloop.
but i am getting error saying that "The type od database table and work area (TH_FINAL) are not unicode convertible"?
I am not able to understandwhat would be the solution for this ?
Thanks and regards,
Prasad K. NAralkar

The error occurs in the UPDATE statement included in the code. In this statement it is seen that there is a mismatch of structure defined for the DDIC table /tdk/st0027 and that of your work area th_final.
try to create a structure w.r.t the DDIC table.
Eg: DATA: wa_temp TYPE /tdk/st0027.
MOVE-CORRESPONDING th_final TO wa_temp.
Then try to UPDATE using the temporary work area i.e wa_temp which has structure similar to that of the database table.

Regarding updating unicode check flag to all z* programs at once

Hi all,
We are upgrading from 4.7 to ecc 6.0   ,
we have created one pilot server where we have installed ecc 6.0 and all prduction data is copied on it .
OUR basis team has done that process and it is done with unicode check active ,
But   all Z programs such as few customs programs are still non-unicode as they are old programs so want
to update unicode check flag which is pressent in attributes of program .
MANUALly you can do for each program and activate that i know ,but how to do it all at once .
Because when we Excecute UCCheck we get all programs   which are nonunicode   , in which it shows that programs The system found no Unicode syntax errors . whichneeds to be just do unicode check flag active and activate the program .
How that can be done at once all .
Regards
Deepak.

Hi ,
My problem is solved ....
i found that after executing UCCHECK transaction code ,in display you will find one button on rigth side
"set unicode attribute"   . after selecting no of programs at once we can press that butoon .
The Unicode flag is set for the selected programs. The programs are
written into interactively selectable transport requests and generated.
You must later release the transport requests.
I hope this will be helpfull to all.
Regards
Deepak.

How to update menu using menumaker

I used menumaker to generate menu for pekwm
mmaker -vft aterm pekwm
v -- gives some info
f -- forces to write even if there is a "menu" file in ~/.pekwm folder.
t aterm -- specifies which terminal emulator to use.
The same applies to fluxbox, openbox, etc.
Here is the link to menumaker http://menumaker.sourceforge.net/
Now, if you have hand edited the menu and then want to run menumaker (after installing some other apps), then all the stuff that you edited will be lost. Is there a way to tell menumaker not to delete anything but just to add since many apps cannot be added by menumaker automatically, eg., an entry for wine application. In other words, how to update pekwm menu after installing applications but not to delete hand-edited stuff.

I assume dr is your data row which you got from a data table object. There seems problem while loading the data table itself, there is no data in dr["lookupcolumn", check below links
http://stackoverflow.com/questions/13798586/reading-data-from-excel-and-then-updating-it
http://stackoverflow.com/questions/9399737/how-to-create-a-lookup-column-when-using-data-binding-with-excel-listobject
Mark ANSWER if this reply resolves your query, If helpful then VOTE HELPFUL
INSQLSERVER.COM
Mohammad Nizamuddin

How to update Toshiba WT310 to Windows 8.1?

Hi,
How to update my new Toshiba Tablet to Win 8.1????
I cannot find anything in Windows shop Application

Well, according to this [Toshiba Windows 8.1 update supported model page|http://www.toshiba.eu/innovation/jsp/checkWindows8_1Compatible.do?service=EU] , the Toshiba WT310 is Win 8.1 supported and there are definitely Win 8.1 drivers for this unit.
The Win 8.1 update should be available in Microsoft Store. In case does not appear in Store, you should update the Win 8 to the latest state and should try again to get the Win 8.1 update.

MSI GTX560 Ti Hawk - how to update bios?

I can' install Live Update v5 to my Win 7 64 bit PC - does anyone know if that's a problem - there's an error at the end of the install.
How can i update my MSI GTX560 Ti Hawk bios?

Quote from: kot0005 on 04-November-11, 13:19:40
Bios: http://www.mediafire.com/?12mupn50trj4m4n
Yes
Quote from: tovalb on 04-November-11, 22:34:53
can you please check mine as well ?
MSI N560GTX-Ti Twin Frorz II/OC
S/N: 602-V238-16SB1101161349
bios: 70.24.0A.00.00
Link to bios:
http://www.filemail.com/dl.aspx?id=YXCVIXBEDGLYAAE
Is my VBIOS up to date?
Tovalb
No, check PM

How to update BIOS on Satellite L40-13G

Hello everybody!!
I want to update my BIOS, but doesn't know how to do it. I looked instruction on a site:
Option 2: Update with CD-ROM
1. Extract the zip file containing the BIOS upgrade to a temporary folder.
2. In the temporary folder three sub folders will be generated. "docs", "Update - 3,5' Disk", "Update - CD-R or CD-RW"
3. How to make a bootable CD-ROM please read the *.pdf file in the "docs" folder.
4. Ensure the Notebook is connected to the mains.
5. Turn the Notebook off.
6. Place the CD-ROM containing the BIOS upgrade in the optical disk drive.
7. Turn the Notebook on with the F12 key.
8. The BIOS boot menu appears. Select CD/DVD or the CD-ROM symbol using the arrow keys. Press "Enter".
9. The Notebook will boot from the BIOS upgrade CD-ROM.
10. A boot menu appears. Select the point for update the BIOS by using the arrow keys. Press "Enter".
11. The BIOS update process starts. Do not switch off the notebook during update.
12. If the update process is finished follow the instruction on the screen.
Downloaded such update of bios: bios-20070904123621.zip
Page with update file: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_bios.jsp
Then I decompressed zip,.. and didn't see three directories, which written about in instruction (from above).
Help please, what I must to do. Or how to update my BIOS?
Thank you!

Listen Alexey!!
At this time you can find the BIOS 2.20-WIN for Satellite L40 on the Toshiba European driver page.
This is a *windows-based* version of the BIOS. Its *NOT* traditional BIOS version.
In such case you cannot update the BIOS using a diskette or CD. The BIOS update must be performed while the OS is running!!
However, the BIOS update is tricky and always RISKY!!! If you have no problems with your notebook, dont update anything!!!
The wrong BIOS or wrong BIOS update procedure can damage the board!!!!

How to update link and import data of relocated incx file into inca file?

Subject : how to update link and import data of relocated incx file into inca file.? The incx file was originally part of the inca file and it has been relocated. ------------------- Hello All, I am working on InDesignCS2 and InCopyCS2. From indesign I am creating an assignment file as well as incopy files.(.inca and .incx file created through exporing). Now indesign hardcodes the path of the incx files in inca file.So if I put the incx files in different folder then after opening the inca file in InCopy , I am getting the alert stating that " The document doesn't consists of any incopy story" and all the linked story will flag a red question mark icon. So I tried to recreate and update the links. Below is my code for that //code start***************************** //creating kDataLinkHelperBoss InterfacePtr<IDataLinkHelper> dataLinkHelper(static_cast<IDataLinkHelper*> (CreateObject2<IDataLinkHelper>(kDataLinkHelperBoss))); /** The newFileToBeLinkedPath is the path of the incx file which is relocated. And it was previously part of the inca file. eg. earlier it was c:\\test.incx now it is d:\\test.incx */ IDFile newIDFileToBeLinked(newFileToBeLinkedPath); //create the datelink IDataLink * dlk = dataLinkHelper->CreateDataLink(newIDFileToBeLinked); NameInfo name; PMString type; uint32 fileType; dlk->GetNameInfo(&name,&type,&fileType); //relink the story InterfacePtr<ICommand> relinkCmd(CmdUtils::CreateCommand(kRestoreLinkCmdBoss)); InterfacePtr<IRestoreLinkCmdData> relinkCmdData(relinkCmd, IID_IRESTORELINKCMDDATA); relinkCmdData->Set(database, dataLinkUID, &name, &type, fileType, IDataLink::kLinkNormal); ErrorCode err = CmdUtils::ProcessCommand(relinkCmd); //Update the link now InterfacePtr<IUpdateLink> updateLink(dataLinkHelper, UseDefaultIID()); UID newLinkUID; err = updateLink->DoUpdateLink(dl, &newLinkUID, kFullUI); //code end********************* I am able to create the proper link.But the data which is there in the incx file is not getting imported in the linked story.But if I modify the newlinked story from the inca file,the incx file will be getting update.(all its previous content will be deleted.) I tried using Utils<IInCopyWorkflow>()->ImportStory() ,But its import the incx file in xml format. What is the solution of this then? Kindly help me as I am terribly stuck since last few days. Thanks and Regards, Yopangjo

>
I can say that anybody with
no experience could easily do an export/import in
MSSQLServer 2000.
Anybody with no experience should not mess up my Oracle Databases !

How to update ADF VO object to refresh the data in ADF Pivot table

I need to know how to update the View object so that the date in pivot table is refreshed/updated/filtered.
here are the steps I performed to create ADF pivot table application using VO at design time.
1) created a collection in a Data Control (ViewObject in an ApplicationModule) that provides the values I wanted to use for row and column labels as well the cell values (Used the SQL query)
2) Dragged this collection to the page in which wanted to create the pivot table
3) In the pivot table data binding editor specified the characteristics of the rows (which attribute(s) should be displayed in header), the columns (likewise) and the cells.
Now, I have a requirement to update/filter the data in pivot table on click of check box and my question is how to I update the View object so that the date in pivot table is refreshed/updated/filtered.
I have got this solution from one of the contact in which a WHERE clause on an underlying VO is updated based upon input from a Slider control. In essence, the value of the control is sent to a backing bean, and then the backing bean uses this input to call the "filterVO" method on the corresponding AppModule:
but, I'm getting "operationBinding" object as NULL in following code. Please let me know what's wrong.
here is the code
Our slider component will look like
<af:selectBooleanCheckbox label="Unit" value="#{PivotTableBean.dataValue}"
autoSubmit="true" />
The setDataValue() method in the backing bean will get a handle to AM and will execute the "filterVO" method in that, which takes the NumberRange as the input parameter.
public void setDataValue(boolean value) {
DataValue = value;
BindingContainer bindings = getBindings();
OperationBinding operationBinding = (OperationBinding)bindings.getOperationBinding("filterVO");
Object result = operationBinding.execute();
The filterVO method in the AMImpl.java will get the true or false and set the where Clause for the VO query to show values.
public void filterVO(boolean value) {
if (value != null) {
ViewObjectImpl ibVO = getVO1();
ibVO.setWhereClause("PRODUCT_TOTAL_REVENUE(+) where rownum < 10");
ibVO.executeQuery();
}

Did you define a filterVO action in your pagedef.xml file?
You might want to read on how to access service method from a JSF Web Application in the ADF Developer Guide for 10.1.3 chapter 8.5

I have downloaded the latest pages update on my iPad, but my iMac still has version 4.3 and I cannot find out how to update it only desktop. When I try to send something from my iPad pages to via email to be opened on my desktop in Pages, it won't open P

I have downloaded the latest pages update on my iPad, but my iMac still has Pages version 4.3, and I cannot find out how to update it on my desktop. When I try to send something from my iPad pages via email to be opened on my desktop in Pages, it won't open in Pages. I get a message that it can't be opened because the version is too old. I sent the document as a PDF and it worked. But I want to be able to use Pages back and forth. HOw do I update the Pages version on my desktop iMac?

The file format used by the iOS versions of the iWork apps can only be read by the new iWork apps on your Mac - i.e. Keynote 6, Pages 5 & Numbers 3. Those versions for the Mac require Mavericks, OS X 10.9. The "too old" error on a Mac comes if you are trying to open an iWork '08 or earlier file in the newest apps. If you do have the newest apps you can open the files from your iPad.
If you can't or don't want to upgrade to Mavericks & the newest iWork apps your best option would be to export/share the files from the iPad to a type an older version of iWork can read such as Word, text, Excel, etc.
Or contact AppleCare. They made this mess, let them fix it.

How to update an existing item in a sharepoint list using the WSS adapter for Biztalk

Is there a way that a record in SP list be updated using WSS adapter in biztalk ?
BizTalk 2013 and SP 2013 ..
Regards
Ritu Raj
When you see answers and helpful posts,
please click Vote As Helpful, Propose As Answer, and/or Mark As Answer

A ListItem has its own unique row id so in all likelihood, an insert with the same data will result in a new list entry. The Lists Web Service however, has an UpdateListItem method which will take an update request. [refer
http://msdn.microsoft.com/en-us/library/office/websvclists.lists.updatelistitems(v=office.15).aspx ]
There is another note in the conference (marked answered) to your List Item Update problem. Probably worth a try too. [refer
http://social.msdn.microsoft.com/Forums/en-US/bee8f6c6-3259-4764-bafa-6689f5fd6ec9/how-to-update-an-existing-item-in-a-sharepoint-list-using-the-wss-adapter-for-biztalk?forum=biztalkgeneral ]
Regards.

How to update the table available in BADI method

Hi Friends,
I have to implement one badi ME_REQ_POSTED for purchase requistion, in this badi I have to read first line item and do
some check...if that check is true i need to update subsequent line item (line 20, 30, 40 or so) with purchase group and MRP controller.
In this BADI i have method POSTED, in this method parameter IM_EBAN is a table which i need to modify with my different
values for purchase group and MRP controller.
Kindly let me know how to update this table, so the changes can be reflected in purchase requistion.
Since when I tried to directly modify the table in a loop, system throw one error stating IM_EBAN can not be modified.
kindly help.
pradeep

hi
I have implemented this exit but it does not stop at it while saving Purchase requistion. But my previous BADI stops at it when saving.
Kindly guide.

How to update the table value in the valuechange event?

I have an input field in the datatable with the valueChangeListener
<rich:dataTable id="cart" value="#{cart.cartList}" var="item">
<h:inputText value="#{item.cost}" id="qty" valueChangeListener="#{items.updateCost}" onchange="submit()">
<h:outputText value="#{item.errorMsg}"> </h:outputText>
in the backing bean
 Item item = (Item) model.getRowData();
// do some update, if the cost too larger, change to max_cost
 item.setCost(max_cost);
 item.setErrorMsg("Error Msg");
After calling the valuechange method, the screen output doesn't update the cost.
How to update the table value in the valuechange event?

As you're misusing the valueChangeListener to set another input field, you need to skip the update model values phase. Otherwise the value set in the valueChangeListener will be overridden by the submitted value. You can do this by calling the FacesContext#renderResponse() inside the valueChangeListener method. This will shift the current phase immediately to the render response phase, hereby skipping the update model values and invoke application phases.

How to update Unicode in my Win 7 PC?

Similar Messages

Maybe you are looking for