How to update Windows Servers faster with WSUS?

We use WSUS to update all our Windows computers including servers, A week or two in advance, we install updates on non critical servers of each platform to check for issues and then we schedule a weekend outage for the rest of servers.The problem is that the process is way too slow. It takes 5 to 7 hours to install updates on all the remaining servers manually.We approve updates and have the updates automatically downloaded and ready to install several says in advance. Then on the day of updates, we RDP into each server and start the installation process from the Windows Updates GUI. By the time we finish starting the updates on the last server, we can go back to the first servers and start rebooting.I would like to get some kind of automation to cut this 5 to 7 hour process into 1 to 2 hours.The main thing we need to control is the...
This topic first appeared in the Spiceworks Community

Similar Messages

How to install Windows 8.1 with Windows 8 Product key?

I have purchased Upgrade pack from Windows 7 to Windows 8. I have also Updated the OS to windows 8.1 through Store. How to install Windows 8.1 with Windows 8 Product key?

The download link for the Windows 8.1 installer at the Upgrade with Product Key Only does not accept a Windows 8.0 product key. I ended up using the trick suggested by Andre Ziegler in this thread to obtain the 8.1 download independent of the Windows
Store, but I haven't yet checked if the 8.0 key works from 8.1 Setup.
I do IT for a living but I have plenty of family members that bring their notebook PCs to me and ask me to do the heavy lifting, and I'd rather not re-download the same 3.6 GB every single time someone tells me to fix their PC. I also want to be able to
re-install 8.1 from the source media in case of a catastrophic hard disk failure and I have to replace the disk.
As an aside, tools that retrieve product keys for installed products end up retrieving the 8.0 product key from an 8.1 install that was upgraded via the Store. It kind-of makes sense that an 8.0 key could work to install 8.1 because 8.1 is supposed
to be a free upgrade for licensed 8.0 users, but this doesn't seem to work until after 8.1 is successfully installed via some trickery and the user supplies the 8.0 key to activate it.

How to update my ibook G4 with out itunes

how to update my ibook G4 with out itunes

Your question begs more questions before an answer...
What are you trying to upgrade, and why would you try to use iTunes
in a vintage G4 computer that cannot run an OS X later than 10.5.8
at best? (and only if it has a processor at least 867MHz or better)
With at least a 1.0GHz iBook G4 you could run Leopard 10.5.8, and
the system requires a retail DVD to install the 10.5, then go online
after installation, to get the Combo 10.5.8 update, by use of Software
Update within that first earlier system...
If the computer does not have at least the minimum processor, it would
not be able to see Leopard as a system, so Tiger 10.4.11 is the last...
http://www.apple.com/support/leopard/
iTunes does not upgrade or update much of anything in an obsolete &/
or vintage Mac OS X before the Intel-Mac era, and prior to OS X 10.6.8.
If your computer does not have an iTunes version at all, you can go to
Apple support downloads and look at older iTunes, and older safari,
and some other bits that are limited to their respective vintage OS X.
Usually the upgrade path utilizes DVD media or CD media, for software
& depending on what kind of software, then later get update-downloads.
To see if there may be anything not already installed in the system or
applications that could exist in the Apple support download servers,
you could see if the System's own Software Update, located in Apple
Menu in upper left side of the menu bar in Finder, can locate some.
If you perform a new install and did not save all the bits as downloaded
from when they were more current, some updates to original media that
formerly were online and available as download (step updates, not full
upgrades) you may eventually be unable to upgrade then update an older
OS X system; the remainder of the later or last fixes were in the update.
So, if you have an old G4 PowerPC Mac computer running, say Tiger 10.4.3
and thought to use some software intended to run in Tiger 10.4.11, then
you'd have to see if Software Update could find the 10.4.11 Combo update.
After updating the main system, other applications may also see a need to
be updated, if they were not already as far as they could go, in their vintage.
iPhoto, and other applications, such as they were, had updates to their main
application. So with iTunes, the last version that can work in a PPC G4/G5
non-intel would be in the last supported OS X, Leopard 10.5.8, and that
version number is iTunes 10.6.3; so you can't visit an App Store or Mac App
Store nor can you run Snow Leopard on a PowerPC architecture Mac.
With the intel-based Mac, and Snow Leopard, you can access the online
Stores to include recent Mac Apps, App Store, iTunes Store, etc. A light
version of early iTunes (see iTunes Player) can be seen, and their Radio
still plays free music channels. I have several older pre-Intel Macs...
The matter involves the vintage of the device, the system, and limits of the
old vintage/obsoleted configurations where both are interdependent.
Not sure if this helps, but more of a history lesson may be read if you look
into everymac.com and compare models, build years, and other specs...
If you need some feature or function not supported by vintage hardware or
vintage software, or a newer web browser, you have to look further. A fair
browser can be found in TenFourFox. I use it daily in a PPC G4 MINI 1.5GHz.
with Leopard 10.5.8. Plus others. To go further, look into an Intel-based Mac
such as MacBook2.1 & then buy the Snow Leopard retail DVD for about $20.
Hopefully this helps somewhat...
Good luck & happy computing!

How to update adobe flash player with os10.6.8

how to update adobe flash player with os10.6.8

You can check here what version of Flash player you actually have installed: http://kb2.adobe.com/cps/155/tn_15507.html
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later:
When you have installed the latest version of Flash, relaunch Safari and test.
If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
click Check Now. Quit and relaunch your browser, but check this also:
http://support.apple.com/kb/HT5655?viewlocale=en_US&locale=en_US which also covers ‘blocked plug-in’.

How to update the posted documents with Business Area wise

Dear experts
Please suggest me how to update the posted documents with Business Area wise
Ajeesh.s
Moderator message: please do more research before asking, show what you have done yourself when asking.
Edited by: Thomas Zloch on Nov 2, 2011 2:26 PM

Hi,
Select all your folders in Disco Administrator,ALT+ENTER to go to properties, then change the database from the default database to the remote database.
Hope that helps,
Rod West

How to update a dbf file with gui_upload???

hi friends,
i would like to know how to update a dbf file with gui_upload???
as i hve already know that it's easy to convert dbf to tab formatted text fle and thn upload it.but i want the direct uploading way.i don't let my user's bsy with converting existing dbf to txt.so pls help me asap!!!!!i will be thankful to you!!!!!

its very easy you can search other forum!!!

CAS with WSUS(SUP)upstream server connected with microsoft for updates and 3 downstream servers Primary with WSUS(sup)

hi aaa
WSUS in the same site server with sccm but we have one cas and three primary with WSUS
how much traffic will generate due to this process , as our CAS with WSUS will be in the same box and it will provide updates to downstream Servers in three primary sites. IS it good to have WSUS and site server together as we have SQL in different box for
all three primary and CAS.

Hi Torsen
35000 clients with CAS 16GB memory and 300GB Hard disk same for all primary sites
Germany with 6000 clients ,norway with china with 15000 clients and UK with 10000clients
As the client wanted to Use CAS ,we have created CAS otherwise it could be standalone primary site.
CAS in China with each region having Primary site so we have three primary.

How to lock windows 8.1 with selected applications

In windows 8.1 how to make a kiosk mode with selected application(Mail, IE, Camera & Reader)

check this, hope it will answer your question
http://blogs.technet.com/b/canitpro/archive/2013/12/17/step-by-step-enabling-kiosk-mode-in-windows-8-1-via-assigned-access.aspx

How to create Windows 7 Homegroup with Verizon Router

I have a desktop and a laptop, both running Windows 7 (the desktop is running Windows 7 Home Premium, the laptop is running Windows Ultimate). With XP I had a nice network and could share printerhs, files, etc .
After I upgraded both machines from XP to windows 7 I cannot get the homegroup to create AND share. I can create a homegroup on either machine, but in either case the other machine cannot see the home network.
Windows 7 says that Homegroup requires IPv6, but Verizon Routers don't support this protocol. I have attempted, as noted on the internet, to disable IPv6 on both computers, but this didn't seem to solve the problem. I chatted with an Verizon tech support person who told me no IPv6 routers.
I am looking for suggestions on how to successfully network my computers with Windows 7 and my Verizon router. (Actiontec M1424-WR). We previously tried to put another router in the interface to do wireless and that didn't work.
Thank you.

IPv6 connectivity needs to be enabled on the Windows 7 machines to support HomeGroup networking. Make sure you re-enable those. Once IPv6 is re-enabled, verify that the PCs are at least holding a Link-Local IPv6 address. Open up command prompt and type in "ipconfig" to verify it is holding something, first of all. It's also a good idea to make sure Teredo is in working order as well, as it's considered to be needed in order to use IPv6 on an IPv4 router.
========
The first to bring me 1Gbps Fiber for $30/m wins!

How to remove Windows Sign-in with Password upon Startup

hi. Can anyone help me? Whenever we buy a new laptop, my husband always told me to "just leave it blank" , referring to the Microsoft Windows sign in with blank box for typing in a password. "This way you don't have to type your password everytime
you sign in." I am totally in agreement with this. Why do extra work everytime you open your laptop? So we have always done that. Last weekend a client made me skype with her. I had to download Skype. I was offered only two options for signing into skype:
either through Facebook or Microsoft Windows sign in, so I had to get a username and password at that point with Microsoft Windows. (Yes, there probably was some way to sign straight into Skype but the corporate relationship comes first, with Microsoft, so
they only provided me a screen with those two options. Nowhere else on the Skype screen did it say there was a third option.)
Now everytime I open my laptop I have to type my long Microsoft password. Right now I am in msconfig and reading every single running service under Startup, Services and Processes and cannot find the name of the authentication for Microsoft upon Startup,
to disable. What is the name of it? Under which category?
I use Windows 8.

On Fri, 31 Jan 2014 15:15:05 +0000, norqdo wrote:
hi. Can anyone help me? Whenever we buy a new laptop, my husband always told me to "just leave it blank"
This is not the correct forum for your question.
Please repost your question to one of the Windows 8 forums:
http://answers.microsoft.com
Paul Adare - FIM CM MVP
Q. How do you solve bus problems?
A. Shoot the driver.

How to update my iphone through with pc

plz help me.
my question is how to update my iphone 5s through date cable with my pc

Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support

How to eliminate windows partition created with bootcamp

Instrucdtions for how to eliminate a windows partition created with bootcamp. thanks

Go back and reread and open the application you used.
though most Mac Pro owners choose to dedicate a drive to Windows.
Even Disk Utility will remove and then stretch the adjoining partiton it is best to use Boot Camp Assistant.
Best place to ask, Boot Camp forum, of course.

How to update the MDS Repository with new structure over the older one

Hi,
I am working on the Oracle SOA MDS repository and I want to update the mds repository with new folder structure over the older one but I am not able to do this . I am able to update the mds in local system but not able to do this for remote server.
Please help me
SOA 11g : 11.1.1.5

Welcome to the Apple discussions.
These discussions are user-to-user. Apple generally doesn't monitor the discussions.
My Turkish language skills are non-existant, however, you can use this to find an Apple store close to you: http://www.apple.com/uk/buy/locator/ (you choose your country in the locator) . It may be as easy as returning it to a local store. In some countries you have a short time period to return anything bought from Apple (for example, 14 days in the US). If that doesn't work, you want to contact Apple customer service. Unfortunately, this is where I was unable to maneuver through the Turkish Apple site, due to not knowing the Turkish language.

How to configure Windows server 2003 with WebDav

Can anyone advise on the best way to configure Windows server 2003 with WebDav so I can get the likes of some of those Apps such as PDF Expert and GoodReader to see the folders.
I have installed the necessary services and on a Windows PC and can browse to the URL OK which lists the files (setup using a Virtual Directory).
When I tried using this with GoodReader/PDF Expert, it could not find the server in question.
Can anyone help me?

Hello，
Please make sure you have checked "anonymous users" on receive connector.
Do you mean you can't send an email to external email address? If so, please post the detailed NDR information.
Please use get-receiveconnector | fl cmdlet to check your receive conenctor configuration.
Cara Chen
TechNet Community Support

Windows Update Error 80080005 Windows 7 Client with WSUS 3.0 SP2 server

Hello everyone, I've looked around at other threads related to my issue, and I can't seem to find a correct answer.
I have a computer lab that I've recently installed a Windows 7 Enterprise image onto 35 Dell Optiplex computers (most are 380's, a few older 360's).
I created the image using MDT2010 and used one of the 380's as a reference.
All has been well for about a month or two but recently 6 computers are giving me Windows Update errors with the error code of 80080005.
I have a WSUS 3.0 SP2 server running, and all of my other computers seem to be getting their updates just fine. WSUS has the problematic computers in it's database, but it shows that they haven't checked in for "x" days.
I have Avast 4.8 Professional installed, I have OpenDNS configured to block bad websites, ____, etc. and I also use an Untangle server to prevent access to bad websites. I've ran a Malwarebytes' Anti-Malware scan on the affected computers, as well
as Windows Defender scan, and Windows Live OneCare scans, and all have found no malicious software.
I have also tried resetting the Windows update service as described here: http://support.microsoft.com/kb/971058 as well as a script that supposedly does the same thing, but also resets all previous
update events, but I can't find the script source right now (I had ran it last week, and it didn't work).
I'm currently running a SFC /Scannow on one of the computers, and now it has finished. It gives the error: Windows Resource Protection could not start the repair service. I'll have to google that next.
The last windows update that ran on the computer that I'm working on now was installed on 11-18-2010 and was a Windows Defender Update (KB915597 Def: 1.93.1985.0)
Previous to that was 11/9/2010 2 updates: KB977165 and KB981852.
I guess I'll have to look at all of the other machines to see if they have the same updates installed.
Anyway, has anyone else had this problem? I've seen vista home editions, and RC's but no real Windows 7 Pro+ RTM versions in business environments where updates were controlled by WSUS.
Thanks for any help that you can provide!
By the way, I only work at this location once a week (tuesdays, well thursdays too, but I'm next door to this building, but I have remote access), so bare with me on trying to fix things.

Ok, for the sake of completeness, I have completed the instructions given by Miya Yao.
After stopping the Windows Update Service (from an Admin Command prompt window), renaming the SoftwareDistribution folder to SDold, then starting the update service again, I still receive the same error when checking for updates.
The windows update log shows this (starting from about 4am) and I just reset the service at about 9:10, which you can see in the log.
2010-12-21 04:19:02:342 940 f20 Agent WARNING: WU client failed Searching for update with error 0x80080005
2010-12-21 04:19:02:342 940 cd4 AU >>## RESUMED ## AU: Search for updates [CallId = {8957B50F-46F1-44C4-A347-20D4C5E91D47}]
2010-12-21 04:19:02:342 940 cd4 AU # WARNING: Search callback failed, result = 0x80080005
2010-12-21 04:19:02:342 940 f20 Report CWERReporter finishing event handling. (00000000)
2010-12-21 04:19:02:342 940 cd4 AU # WARNING: Failed to find updates with error code 80080005
2010-12-21 04:19:02:342 940 cd4 AU #########
2010-12-21 04:19:02:342 940 cd4 AU ## END ## AU: Search for updates [CallId = {8957B50F-46F1-44C4-A347-20D4C5E91D47}]
2010-12-21 04:19:02:342 940 cd4 AU #############
2010-12-21 04:19:02:342 940 cd4 AU Successfully wrote event for AU health state:0
2010-12-21 04:19:02:342 940 cd4 AU AU setting next detection timeout to 2010-12-21 14:19:02
2010-12-21 04:19:02:342 940 cd4 AU Setting AU scheduled install time to 2010-12-22 08:00:00
2010-12-21 04:19:02:342 940 cd4 AU Successfully wrote event for AU health state:0
2010-12-21 04:19:02:342 940 cd4 AU Successfully wrote event for AU health state:0
2010-12-21 04:19:07:350 940 f20 Report REPORT EVENT: {A472759C-BEE7-4161-84E8-41F1C1D03AB4} 2010-12-21 04:19:02:342-0500 1 148 101 {61CA813A-7585-442E-A66B-B0D15CE6BDC0} 1 80080005 SelfUpdate Failure Software Synchronization Windows Update Client failed to detect with error 0x80080005.
2010-12-21 04:19:07:350 940 f20 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2010-12-21 04:19:07:350 940 f20 Report WER Report sent: 7.4.7600.226 0x80080005 61CA813A-7585-442E-A66B-B0D15CE6BDC0 Scan 101 Managed
2010-12-21 04:19:07:350 940 f20 Report CWERReporter finishing event handling. (00000000)
2010-12-21 04:24:22:767 940 f20 PT WARNING: Cached cookie has expired or new PID is available
2010-12-21 04:24:22:767 940 f20 PT Initializing simple targeting cookie, clientId = a6d6dc1c-d844-451c-8609-3879e6cacb33, target group = , DNS name = lab24.sja.local
2010-12-21 04:24:22:767 940 f20 PT Server URL = http://server2:8530/SimpleAuthWebService/SimpleAuth.asmx
2010-12-21 04:24:22:814 940 f20 Report Uploading 2 events using cached cookie, reporting URL = http://server2:8530/ReportingWebService/ReportingWebService.asmx
2010-12-21 04:24:22:814 940 f20 Report Reporter successfully uploaded 2 events.
2010-12-21 06:59:23:020 940 b4c AU AU was unable to detect updates for more than 48 hours
2010-12-21 06:59:28:027 940 c78 Report REPORT EVENT: {511B1C92-939C-4E97-A51B-50E75FCB7AEF} 2010-12-21 06:59:23:020-0500 1 149 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Failure Software Synchronization Unable to Connect: Windows is unable to connect to the automatic updates service and therefore cannot download and install updates according to the set schedule. Windows will continue to try to establish a connection.
2010-12-21 06:59:28:027 940 c78 Report CWERReporter finishing event handling. (00000000)
2010-12-21 09:02:03:476 940 2f4 AU Triggering AU detection through DetectNow API
2010-12-21 09:02:03:476 940 2f4 AU Triggering Online detection (interactive)
2010-12-21 09:02:03:476 940 b4c AU #############
2010-12-21 09:02:03:476 940 b4c AU ## START ## AU: Search for updates
2010-12-21 09:02:03:477 940 b4c AU #########
2010-12-21 09:02:03:488 940 b4c AU <<## SUBMITTED ## AU: Search for updates [CallId = {B65ACC67-ED84-45D4-9774-D0475806E74B}]
2010-12-21 09:02:03:488 940 e38 Agent *************
2010-12-21 09:02:03:488 940 e38 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2010-12-21 09:02:03:488 940 e38 Agent *********
2010-12-21 09:02:03:488 940 e38 Agent * Online = Yes; Ignore download priority = No
2010-12-21 09:02:03:488 940 e38 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2010-12-21 09:02:03:488 940 e38 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2010-12-21 09:02:03:488 940 e38 Agent * Search Scope = {Machine}
2010-12-21 09:02:03:488 940 e38 Setup Checking for agent SelfUpdate
2010-12-21 09:02:03:489 940 e38 Setup Client version: Core: 7.4.7600.226 Aux: 7.4.7600.226
2010-12-21 09:02:03:489 940 e38 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2010-12-21 09:02:03:496 940 e38 Misc Microsoft signed: Yes
2010-12-21 09:02:06:071 940 e38 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2010-12-21 09:02:06:078 940 e38 Misc Microsoft signed: Yes
2010-12-21 09:02:06:080 940 e38 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2010-12-21 09:02:06:087 940 e38 Misc Microsoft signed: Yes
2010-12-21 09:02:06:100 940 e38 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2010-12-21 09:02:06:107 940 e38 Misc Microsoft signed: Yes
2010-12-21 09:02:06:123 940 e38 Setup Determining whether a new setup handler needs to be downloaded
2010-12-21 09:02:06:123 940 e38 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\Handler\WuSetupV.exe:
2010-12-21 09:02:06:129 940 e38 Misc Microsoft signed: Yes
2010-12-21 09:02:06:129 940 e38 Setup SelfUpdate handler update NOT required: Current version: 7.4.7600.226, required version: 7.4.7600.226
2010-12-21 09:02:06:129 940 e38 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.4.7600.226"
2010-12-21 09:02:15:386 940 b4c AU AU received policy change subscription event
2010-12-21 09:02:36:165 940 e38 Setup WARNING: Cbs StartSession, error = 0x80080005
2010-12-21 09:02:36:165 940 e38 Setup FATAL: Applicability evaluation for setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.4.7600.226" failed, error = 0x80080005
2010-12-21 09:02:36:165 940 e38 Setup FATAL: SelfUpdate check failed, err = 0x80080005
2010-12-21 09:02:36:165 940 e38 Agent * WARNING: Skipping scan, self-update check returned 0x80080005
2010-12-21 09:02:36:165 940 e38 Agent * WARNING: Exit code = 0x80080005
2010-12-21 09:02:36:165 940 e38 Agent *********
2010-12-21 09:02:36:165 940 e38 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2010-12-21 09:02:36:165 940 e38 Agent *************
2010-12-21 09:02:36:165 940 e38 Agent WARNING: WU client failed Searching for update with error 0x80080005
2010-12-21 09:02:36:165 940 e8c AU >>## RESUMED ## AU: Search for updates [CallId = {B65ACC67-ED84-45D4-9774-D0475806E74B}]
2010-12-21 09:02:36:165 940 e8c AU # WARNING: Search callback failed, result = 0x80080005
2010-12-21 09:02:36:165 940 e8c AU # WARNING: Failed to find updates with error code 80080005
2010-12-21 09:02:36:165 940 e8c AU #########
2010-12-21 09:02:36:165 940 e8c AU ## END ## AU: Search for updates [CallId = {B65ACC67-ED84-45D4-9774-D0475806E74B}]
2010-12-21 09:02:36:165 940 e8c AU #############
2010-12-21 09:02:36:165 940 e8c AU Successfully wrote event for AU health state:0
2010-12-21 09:02:36:165 940 e8c AU AU setting next detection timeout to 2010-12-21 19:02:36
2010-12-21 09:02:36:165 940 e8c AU Setting AU scheduled install time to 2010-12-22 08:00:00
2010-12-21 09:02:36:165 940 e8c AU Successfully wrote event for AU health state:0
2010-12-21 09:02:36:165 940 e8c AU Successfully wrote event for AU health state:0
2010-12-21 09:02:41:172 940 e38 Report REPORT EVENT: {678C2913-B3B3-4F14-9310-C2E2B1F3334A} 2010-12-21 09:02:36:165-0500 1 148 101 {61CA813A-7585-442E-A66B-B0D15CE6BDC0} 1 80080005 SelfUpdate Failure Software Synchronization Windows Update Client failed to detect with error 0x80080005.
2010-12-21 09:02:41:172 940 e38 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2010-12-21 09:02:41:172 940 e38 Report WER Report sent: 7.4.7600.226 0x80080005 61CA813A-7585-442E-A66B-B0D15CE6BDC0 Scan 101 Managed
2010-12-21 09:02:41:172 940 e38 Report CWERReporter finishing event handling. (00000000)
2010-12-21 09:06:07:779 940 b4c AU ########### AU: Uninitializing Automatic Updates ###########
2010-12-21 09:06:37:809 940 b4c Handler FATAL: UH: 0x80080005: StartSession failed in CCbs::IsCbsPending
2010-12-21 09:06:37:840 940 b4c Report CWERReporter finishing event handling. (00000000)
2010-12-21 09:06:37:872 940 b4c Service *********
2010-12-21 09:06:37:872 940 b4c Service ** END ** Service: Service exit [Exit code = 0x240001]
2010-12-21 09:06:37:872 940 b4c Service *************
2010-12-21 09:08:37:104 940 e84 Misc =========== Logging initialized (build: 7.4.7600.226, tz: -0500) ===========
2010-12-21 09:08:37:104 940 e84 Misc = Process: C:\Windows\system32\svchost.exe
2010-12-21 09:08:37:104 940 e84 Misc = Module: c:\windows\system32\wuaueng.dll
2010-12-21 09:08:37:104 940 e84 Service *************
2010-12-21 09:08:37:104 940 e84 Service ** START ** Service: Service startup
2010-12-21 09:08:37:104 940 e84 Service *********
2010-12-21 09:08:37:108 940 e84 Agent * WU client version 7.4.7600.226
2010-12-21 09:08:37:108 940 e84 Agent * Base directory: C:\Windows\SoftwareDistribution
2010-12-21 09:08:37:108 940 e84 Agent * Access type: No proxy
2010-12-21 09:08:37:108 940 e84 Agent * Network state: Connected
2010-12-21 09:08:37:453 940 e84 DtaStor Default service for AU is {00000000-0000-0000-0000-000000000000}
2010-12-21 09:08:37:462 940 e84 DtaStor Default service for AU is {9482F4B4-E343-43B6-B170-9A65BC822C77}
2010-12-21 09:08:37:464 940 e84 Agent WARNING: failed to access the auth cab, fatal error 0x80070003
2010-12-21 09:08:37:464 940 e84 Agent WARNING: Invalid service in the backup data store; cleaning up
2010-12-21 09:08:37:465 940 e84 Agent WARNING: Failed to add and register service 7971f918-a847-4430-9279-4a52d1efe18d to the data store 0x80240031
2010-12-21 09:08:37:465 940 e84 Agent WARNING: Default Service Recovery: Attempting to add pending registration for service 7971f918-a847-4430-9279-4a52d1efe18d to the data store
2010-12-21 09:09:22:474 940 e84 Report CWERReporter::Init succeeded
2010-12-21 09:09:22:474 940 e84 Agent *********** Agent: Initializing Windows Update Agent ***********
2010-12-21 09:09:22:475 940 e84 Agent *********** Agent: Initializing global settings cache ***********
2010-12-21 09:09:22:475 940 e84 Agent * WSUS server: http://server2:8530
2010-12-21 09:09:22:475 940 e84 Agent * WSUS status server: http://server2:8530
2010-12-21 09:09:22:475 940 e84 Agent * Target group: (Unassigned Computers)
2010-12-21 09:09:22:475 940 e84 Agent * Windows Update access disabled: No
2010-12-21 09:09:22:475 940 e84 DnldMgr Download manager restoring 0 downloads
2010-12-21 09:09:22:476 940 e84 AU ########### AU: Initializing Automatic Updates ###########
2010-12-21 09:09:22:477 940 e84 AU # WSUS server: http://server2:8530
2010-12-21 09:09:22:477 940 e84 AU # Detection frequency: 22
2010-12-21 09:09:22:477 940 e84 AU # Approval type: Scheduled (Policy)
2010-12-21 09:09:22:477 940 e84 AU # Scheduled install day/time: Every day at 3:00
2010-12-21 09:09:22:477 940 e84 AU # Auto-install minor updates: Yes (Policy)
2010-12-21 09:09:22:478 940 e84 AU Setting AU scheduled install time to 2010-12-22 08:00:00
2010-12-21 09:09:22:751 940 e84 Report *********** Report: Initializing static reporting data ***********
2010-12-21 09:09:22:751 940 e84 Report * OS Version = 6.1.7600.0.0.65792
2010-12-21 09:09:22:751 940 e84 Report * OS Product Type = 0x00000004
2010-12-21 09:09:22:772 940 e84 Report * Computer Brand = Dell Inc.
2010-12-21 09:09:22:772 940 e84 Report * Computer Model = OptiPlex 380
2010-12-21 09:09:22:775 940 e84 Report * Bios Revision = A01
2010-12-21 09:09:22:775 940 e84 Report * Bios Name = Phoenix ROM BIOS PLUS Version 1.10 A01
2010-12-21 09:09:22:775 940 e84 Report * Bios Release Date = 2010-03-11T00:00:00
2010-12-21 09:09:22:775 940 e84 Report * Locale ID = 1033
2010-12-21 09:09:22:777 940 e84 AU Successfully wrote event for AU health state:0
2010-12-21 09:09:22:777 940 e84 AU Initializing featured updates
2010-12-21 09:09:22:777 940 e84 AU Found 0 cached featured updates
2010-12-21 09:09:22:777 940 e84 AU Successfully wrote event for AU health state:0
2010-12-21 09:09:22:778 940 e84 AU Successfully wrote event for AU health state:0
2010-12-21 09:09:22:778 940 e84 AU AU finished delayed initialization
2010-12-21 09:09:27:781 940 36c Report CWERReporter finishing event handling. (00000000)
2010-12-21 09:10:20:421 940 bf0 AU Triggering AU detection through DetectNow API
2010-12-21 09:10:20:422 940 bf0 AU Triggering Online detection (interactive)
2010-12-21 09:10:20:422 940 e84 AU #############
2010-12-21 09:10:20:422 940 e84 AU ## START ## AU: Search for updates
2010-12-21 09:10:20:422 940 e84 AU #########
2010-12-21 09:10:20:425 940 e84 AU <<## SUBMITTED ## AU: Search for updates [CallId = {F1E8D669-5A48-4C25-832F-4A5ABD80270F}]
2010-12-21 09:10:20:425 940 36c Agent *************
2010-12-21 09:10:20:425 940 36c Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2010-12-21 09:10:20:425 940 36c Agent *********
2010-12-21 09:10:20:425 940 36c Agent * Online = Yes; Ignore download priority = No
2010-12-21 09:10:20:425 940 36c Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2010-12-21 09:10:20:425 940 36c Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2010-12-21 09:10:20:425 940 36c Agent * Search Scope = {Machine}
2010-12-21 09:10:20:425 940 36c Setup Checking for agent SelfUpdate
2010-12-21 09:10:20:426 940 36c Setup Client version: Core: 7.4.7600.226 Aux: 7.4.7600.226
2010-12-21 09:10:22:715 940 36c Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2010-12-21 09:10:22:725 940 36c Misc Microsoft signed: Yes
2010-12-21 09:10:22:745 940 36c Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2010-12-21 09:10:22:750 940 36c Misc Microsoft signed: Yes
2010-12-21 09:10:22:765 940 36c Setup Determining whether a new setup handler needs to be downloaded
2010-12-21 09:10:22:765 940 36c Setup SelfUpdate handler is not found. It will be downloaded
2010-12-21 09:10:22:765 940 36c Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.4.7600.226"
2010-12-21 09:10:52:778 940 36c Setup WARNING: Cbs StartSession, error = 0x80080005
2010-12-21 09:10:52:778 940 36c Setup FATAL: Applicability evaluation for setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.4.7600.226" failed, error = 0x80080005
2010-12-21 09:10:52:778 940 36c Setup FATAL: SelfUpdate check failed, err = 0x80080005
2010-12-21 09:10:52:779 940 36c Agent * WARNING: Skipping scan, self-update check returned 0x80080005
2010-12-21 09:10:52:779 940 36c Agent * WARNING: Exit code = 0x80080005
2010-12-21 09:10:52:779 940 36c Agent *********
2010-12-21 09:10:52:779 940 36c Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2010-12-21 09:10:52:779 940 36c Agent *************
2010-12-21 09:10:52:779 940 36c Agent WARNING: WU client failed Searching for update with error 0x80080005
2010-12-21 09:10:52:779 940 ba0 AU >>## RESUMED ## AU: Search for updates [CallId = {F1E8D669-5A48-4C25-832F-4A5ABD80270F}]
2010-12-21 09:10:52:780 940 ba0 AU # WARNING: Search callback failed, result = 0x80080005
2010-12-21 09:10:52:780 940 ba0 AU # WARNING: Failed to find updates with error code 80080005
2010-12-21 09:10:52:780 940 ba0 AU #########
2010-12-21 09:10:52:780 940 ba0 AU ## END ## AU: Search for updates [CallId = {F1E8D669-5A48-4C25-832F-4A5ABD80270F}]
2010-12-21 09:10:52:780 940 ba0 AU #############
2010-12-21 09:10:52:783 940 ba0 AU Successfully wrote event for AU health state:0
2010-12-21 09:10:52:783 940 ba0 AU AU setting next detection timeout to 2010-12-21 19:10:52
2010-12-21 09:10:52:783 940 ba0 AU Setting AU scheduled install time to 2010-12-22 08:00:00
2010-12-21 09:10:52:783 940 ba0 AU Successfully wrote event for AU health state:0
2010-12-21 09:10:52:784 940 ba0 AU Successfully wrote event for AU health state:0

How to update Windows Servers faster with WSUS?

Similar Messages

Maybe you are looking for