How to upgrade device version's from BES

Hi Guys,
I was wondering if you could help, i've been searching the techincal support section and the forums and could someone point me in the right patch to upgrade blackberry handsets via BES v5.
I can find the software to upgrade via desktop manager but i want to deploy this through our BES 5.0.1
also I have BES 4.16 which i am migrating the users onto the new BES via the transporter tool, but i've found our IT Policy creates issues with device version 4.3 and needs to be reactivated when migration is complete.
So i would also like to upgrade the devices on the old BES before migrated them across.
So is there a way of upgrading a device version from BES 4.1.6 if so could you also provide instructions?
Is there any issues when upgrading device versions? would i need to resend the service book? it policy? re-activation?
thanks in advance, i really appricate this.
Superfly

Superfly, I found this link below for pushing the upgrade from 5.0.1mr2,
but, still nothing for 4.6.
http://www.port3101.org/port-3101-bes-admin-bar-grill/2336-device-software-bundles-configurations-be...
particularly: http://www.port3101.org/attachments/port-3101-bes-admin-bar-grill/489d1273607365-device-software-bun...
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

How to upgrade the version above 10.4 in free

hello,
Now the version of my Mac OS X system is 10.3.9. How to upgrade the version above 10.4 in free.
Thanks very much!

You can't.
An upgrade from 10.3.x to 10.4 is a paid upgrade.
You need to purchase a retail copy of 10.4.

How to upgrade to OS lion from a doggle

how to upgrade to OS lion from a doggle

Kappy wrote:
What's a "doggle?"
It's a box like device on the end of a short USB or Ethernet cable usually designed for copy protection purposes for software.
The original Quark X Press came with one, we used to mess with co-workers by pulling it out slightly so it didn't make contact.
Edit: Ah, looks like the terminology has changed
The term "dongle" was originally used to refer only to software-protection dongles; however, currently "dongle" is often used to refer to any small piece of hardware that plugs into a computer.
Followed by a picture of what appears to be a USB looking thumb type drive, but it's likely not if it's got electronics inside to provide copy protection.
https://en.wikipedia.org/wiki/Software_protection_dongle
Lion of course doesn't come on a dongle, it comes on a USB thumb drive. But the method is to hold the option key down and select it to boot from and then run the installer.
OP should backup all data off the machine first before proceeding with their Lion's dongle. LOL

How to upgrade Php Version in solaris 10 SPARC ?

How to upgrade php Version 5.4.7 to latest version 5.5.3?
Do we need to uninstall current version(5.4.7) and install latest version(5.5.3)?
Or is there any way to upgrade directly.

I'm suggesting to remove the initial package and then install a new version that is in the same package format.
You can also compile it and modify the target installation directory during the compilation.

How to upgrade SAPCAR version?

Hi gurus,
I am trying to apply support packages using SPAM. But whenever i am
trying to upload the Support Packages through frontend i am getting
following error:
"CAR error message: SAPCAR: can not change date
for /usr/sap/trans/EPS/in/CSR0120031469_0034275.ATT"
I down;loaded again the support package but still getting the same
error.
I tried to uncar the same in the application server but i still got the
error while doing SAPCAR -xvf.
I have got a solution to upgrade the version of SAPCAR. but i dont know how to do it?
how to upgrade the version OF SAPCAR.
Thanks & Regards,
Priya

Hi Priya..
You don't need downtime to change permissions...
You can run "/sapmnt/IRQ/exe/saproot.sh" script as ROOT user to set the permissions on Kernel Directory.
OR
Do as follow:
# chown -R irqadm:sapsys /sapmnt/IRQ/exe
# chmod -R 755 irqadm:sapsys /sapmnt/IRQ/exe
# chmod 4755 /sapmnt/IRQ/exe/saposcol
# chown root:sapsys /sapmnt/IRQ/exe/saposcol
After that don't forget to set the permissions of BRTools (brbackup, brrestore, brarchive, brspace etc.) according to below note.
[113747 - Permissions for DBA tools BRTools and SAPDBA.pdf|https://service.sap.com/sap/support/notes/113747]
Regards.
Rajesh Narkhede
Edited by: Rajesh Narkhede on May 14, 2010 3:51 PM

How to upgrade labview version 7 to version 8

Hi,
1. I wish to know how to upgrade labview version 7 to version 8?
2. If I save my VI under labview 7, how can I run in labview 8 and back to labview 7. What are the steps needed?
Ridwan

Yes, the option that Mike is speaking of is called File » Save for Previous Version ....
LabVIEW 7 files will automatically open with LabVIEW 8, you don't need to do anything special.
Kameralina
Ask NI (ni.com/ask)
Search The KnowledgeBase
NI Developer Zone
Measure It. Fix It. ni.com/greenengineering/
NI Vision ni.com/vision/

How to upgrade old version of MacPro 1.1 with Lion 10.7.5 to Mountain Lion? There is some way by inserting 64 bit instead od 32bits. Reply to Stefan Erix

How to upgrade old version of MacPro 1.1 with Lion 10.7.5 to Mountain Lion? There is some way by inserting 64 bit instead od 32bits. Reply how to do it to Stefan Erix, Uppsala, Sweden
<Email Edited by Host>

If you are a developer, or have a similar personality, there is an aftermarket EFI-64 "work-alike" program you can load into memory instead of 64-bit firmware. It is too complicated for regular folks.
You must already have upgraded your Memory and your graphics card to use this solution, and your Mac will not operate quite normally. Any problems with it are unsupported.

I have a mac g5 with version 10.4.11 and wanted to know how to upgrade to version 10.5.8?

I have a mac g5 with version 10.4.11 and wanted to know how to upgrade to version 10.5.8?

If you call Apple at 1 800 MY APPLE, you can get a set of retail replacement discs of OS X 10.5 Leopard.
Apple is supplying these on white DVDs for less than $20.
You'll need to give them your Mac's serial number.
See this link here.
https://discussions.apple.com/message/21504111#21504111
These were reported to work on any PowerMac G4 or G5.

How to upgrade to LR CC from LR5.7...When I click on check for updates, dialog box says I have the latest

How to upgrade to LR CC from LR5.7...When I click on check for updates, dialog box says I have the latest/
The creative cloud dialog box that lists the applications, doesn't show LRCC

Log out of the CC desktop app, then log back in again. You should see it then.

I upgraded to version 9 from version 8. The following items do not work properly - menu, home page, navigation bar, wheel click. I backed up to version 8, and none of this stuff works right. How do I fix this?

When I open Firefox, the bookmark menu is a little tab in the upper left corner. If I go to view and un-click bookmark menu and then view, click it, the standard menu bar shows up. The Back and Forward buttons don't work. The navigation window does not show the URL of the current page. When opening, the home page does not come up. The wheel click works on the bookmark bar, but not within a page. The menu (file, edit, etc) does not work after the first page. Version 8 worked well. When I upgraded to version 9, all this trouble started. I backed up to version 8, but the problem persists.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox

How to upgrade the fwsm image from 3.1(10) to 4.0(8).

Hi all,
I need to upgrade the fwsm image from 3.1(10) to 4.0(8). Can i do it directly from 3.1(10) to 4.0(8) ?
Do i need to upgrade other image also along with Firewall version 4.0(8)?
FWSM# sh ver
FWSM Firewall Version 3.1(10)
Device Manager Version 6.1(5)F
Compiled on Mon 21-Apr-08 17:43 by fwsmbld
FWSM up 2 days 15 hours
failover cluster up 2 days 15 hours
Hardware: WS-SVC-FWM-1, 1024 MB RAM, CPU Pentium III 1000 MHz
Flash STI Flash 8.0.0 @ 0xc321, 20MB
0: Int: Not licensed : irq 5
1: Int: Not licensed : irq 7
2: Int: Not licensed : irq 11
The Running Activation Key is not set, using default settings:
Licensed features for this platform:
Maximum Interfaces : 256
Inside Hosts : Unlimited
Failover : Active/Active
VPN-DES : Enabled
VPN-3DES-AES : Enabled
Cut-through Proxy : Enabled
Guards : Enabled
URL Filtering : Enabled
Security Contexts : 2
GTP/GPRS : Disabled
VPN Peers : Unlimited
Serial Number: SAD125004FT
Running Activation Key: 0x00000000 0x00000000 0x00000000 0x00000000
Configuration last modified by enable_15 at 18:58:52.627 IST Mon Jan
11
2010
Regards
Madhu

Application partitiion is what you will be upgrading from 3.1.(10 to 4.0(8).
MP - maintenance partition is supposed to be 2.1.2 or above which is the same requirement for 3.1.x so, you will be good there.
Pls. check the compatibility with the swtich code in this 4.0.8 Release Note link:
http://www.cisco.com/en/US/docs/security/fwsm/fwsm40/release/notes/fwsmrn40.html
Pls. check the chassis system requirement in the above link.
commands you will need are:
copy tftp flash:image
copy tftp flash:asdm
falsh:image for OS and flash:asdm if you will be upgrading the asdm as well.
-KS

Help! Need advice on how to upgrade to Windows 7 from Windows 7 Evaluation Copy: Build 7100

I am on an HP Pavillion Media Center m8200m PC. The computer came with Vista on it and did not come with any Vista operating system installation discs when I bought it. I did make a set of two system recovery discs from this original Vista operating system, About 3 months ago, I decided to put on an evaluation copy of Windows 7 (Build 7100). In order to do this, I had to remove Vista completely from my computer and then install the the Windows 7 evaluation download from Microsoft. It has worked fine since, but will expire shortly. I now want to put on a permanent installation of Windows 7, but am unsure how to do this. Can someone please explain the procedure to me. I have read that I cannot upgrade to anything directly from the Windows 7 evaluation copy. Do I need to recover the computer and install Vista from the recovery discs (providing I can reinstall Vista from these recovery discs), then upgrade to a permanent version of Windows 7 (from a less expensive Windows 7 upgrade). Or, will I have to buy a full version of Windows 7 and start from scratch? Also, is there a way to retain all my data on this computer during this new installation of Windows 7, or will I lose averything including programs, data, etc. and have to reinstall it once I have the new permanent operating system on the computer?
I'm usually pretty good with this stuff, but can't seem to get a straight answer. I want to do this as soon as possible, so would greatly appreciate a straight, clear explanation of what to do. I would truly appreciate it.

It is possible to upgrade the evaluation version to the RTM version with some fiddling as shown here. It would be better to do a clean install.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How to upgrade 10.2.04 from 10.2.0.0

hi
EBS R12 RUP 6
DB 10.2.0.0
OS RHEL 5.5
how to upgrade 10.2.0.4 from 10.2.0.0??
what short of patch and script to download from metalink for this process??
what Critical PU is required for this?
rgrds

hsawwan wrote:
Hi,
Where you got this query from? What is your reference?
Thanks,
Hussein
For full overview please see OracleMetaLink document 553812.1 "Actions for the DSTv4 update in the 10.2.0.4 patchset".
1.
When patching from a lower 10.2 release or upgrading from 10.1.0.X directly to 10.2.0.4, check the current version of the Oracle time zone definitions with the following command:
SELECT version FROM v$timezone_file;
readme 6810189
do i need to update tz?and then this upgradation?
Edited by: new2appsdba on Aug 14, 2010 2:24 AM

How to upgrade my version to 2.0

how to upgrade my ipod to version 2.0

Do you mean iOS 2.0? If so, I'm assuming you have a 1st generation iPod Touch. In that case, use this link to purchase the 3.1 update as 2.0 is longer available directly from Apple.
http://support.apple.com/kb/HT2052
B-rock

How to upgrade JRE version for Oracle BPEL process manager

Dear Experts,
Is it possible to upgrade JRE version of Oracle BPEL ??. If so means then how it is possible ?? what are the measures should I take to achieve the same. Please suggest me. Its very urgent.
Thanks,
Rajesh A

Hi Rajesh ,
First of all be aware that not all versions of 10.1.3 AS are certified with JDK 6, you need to have at least 10.1.3.4 .
Next, you can either upgrade the JDK for the whole AS, or just for oc4j_soa component.
There are several docs on Metalink that explain how to do this, and I recommend to take a backup of your OH before changing the JDK .
Suppose you already have JDK 6 installed , just edit opmn.xml and add the line
<data id="java-bin" value="/usr/jdk1.6.0/bin/java"/> <--- here put the path to your JDK
just below
<category id="start-parameters">
of the oc4j_soa component.
If you have problems just restore the old opmn.xml from backup and you;ll have back your original settings.
Regards,
Mihai

How to upgrade device version's from BES

Similar Messages

Maybe you are looking for