How to upgrade/downgrade firmware of following switch.
How to upgrade/downgrade firmware of following switch.
Please kindly inform how to do it.
- Download site
- Process required
[Version that want to use]
・Catalyst3750X : 15.0(2)SE6
・ASA5525-X : 9.1(2)
・ASA5525-X ASDM : 7.1(6)
Upgrade to ASA 9.3 and ASDM 7.3
Similar Messages
-
How to Upgrade PowerBook Firmware( All Hardwares )
How to Upgrade PowerBook Firmware( All Hardwares )?
Thank U in advanceIf there is a firmware upgrade available for your model of PowerBook, it will appear when your run Software Update and also be listed at http://www.apple.com/support/downloads/
Then you download the installer and run it. Usually you have to do something like hold down the Command key and Power button while you're restarting.
Firmware updates don't come along very often. The last one I can remember installing was for my B&W G3. The last firmware upgrades I can see listed for a PowerBook were for the 550MHz or 667MHz G4s back in 2002.
Is there a specific reason why you're asking about firmware upgrades? -
How to upgrade handheld firmware to the most available recent version
Hi,
I have a BB 8800 (T-Mobile) and I tried to update current firmware (4.2.1.101) to the recent OS version. I went to the T-Mobile site and found that there was older version (4.2.1.74) than installed on my handheld.
So, I did the following. I checked all carries on this page and found that Orange UK offers handheld version 4.5 for BB8800.
I downloaded handheld 4.5 software from Orange UK site. Installed it on my PC.
Deleted the VENDOR.XML file located at:
C:\Program Files\Common Files\Research In Motion\AppLoader\VENDOR.XML
After that I connected my handheld to the PC and ran Blackberry Desktop Manager.
And it upgraded my handheld OS to the 4.5.0.52
if your issue solved set "Solution" mark at the relevant post
Solved!
Go to Solution.i can suggest this guide:
http://www.blackberrycool.com/2008/08/how-to-upgrade-your-blackberry-software/
feel free to press the like button on the right side to thank the user that helped you.
please mark posts as solved if you found a solution.
@SimonHain on twitter -
How to upgrade driver/firmware for 3rd party airport card?
I have a Motorola WPCI810g wireless card that i have been using for over a year. Previously in Panther i tried to upgrade to Airport 4.2 to take advantage of WPA, but i ended up having to downgrade back to 4.1 because 4.2 left airport nonoperational. I have been on Tiger for quite a while and only recently noticed that i was automatically upgraded to Airport 4.2, however I do not have WPA as an encryption option (neither when joining, or creating a network). I can only assume it has to do with the firmware on the card but I cant figure out how to update it. I have tried to search these threads but the closest i can come is using Airport Admin Utility to upgrade the firmware on a base station.
About Airport is such:
Airport
427.1.1
Component Versions:
Airport Menu Extra: 427.1.1
Airport Framework: 429.6.0
Airport Extreme Driver: 405.1.0
Airport Admin Utility: 420.5.0
Airport Setup Assistant: 420.6.0
Powermac G3 Rev2 B&W 400mhz, iBook G4 14" 1.33mhz Mac OS X (10.4.9) Pioneer DVR-109, Moto WPCI810G, Nano (1G) 4gb Blackyup, and this is what it says:
AirPort Card Information:
Wireless Card Type: AirPort Extreme
Wireless Card Locale: USA
Wireless Card Firmware Version: 405.1 (3.90.34.0.p18)
Current Wireless Network: wireless network not available
in addition, I found that I can choose WPA as an encryption if i select 'other' as the network. What I would really like to do is create a network with WPA, since i use this desktop to connect my ibook to the internet. so far nothing... -
How to upgrade e50 firmware via apple mac?
I own an E50 (RM-170) which is currently running v 06.41.3.0.
How do I tell what the most up-to-date firmware is?
And how do I upgrade the firmware into the phone using an Apple Mac? (I saw the updater software for Windows but couldn't see a Mac version).
Thanks
Peter Crow, New ZealandCheck on the Nokia software update site for your specific model. Be aware that they release firmware for different regions at different times.
As for upgrading via a Mac, that isn't available as yet.
Don't bother trying through Parallels. I have and it doesn't work.
Sanjay Mehta
Motorola "Brickphone" circa 1996, Alcatel One Touch, Ericsson R380, Sony Ericsson T220, Sony Ericsson T630, Nokia E50, Nokia E61i, Nokia 9300i, Nokia E71,Nokia X6, Google Nexus S, iPhone 4S -
Had this router running for acouple weeks. Its had that **bleep** connection problem but just today it got even worse. About every 30 seconds it will lose connection to the modem and internet for about 2 seconds. So even if i try to upgrade my firmware down to 008 i dont get the chance. The upgrade gets about 50% done and then i lose internet and it fails. **bleep**?! please please please help
Solved!
Go to Solution.If you have downloaded the firmware already then disconnect your modem from the router, and just connect a computer straight to the router on any one of the LAN Port's...
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the username blank & in password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router... -
HT1414 How to upgrade the firmware on i phone
Please advise how to upgrade the I Phone 4 ???
Connect iPhone to syncing computer using USB cable.
Start iTunes on syncing computer.
Follow prompts from iTunes to upgrade. -
hi i would like some step by step assistance in upgrading the firmware on my cisco 2504 wireless controller and my
cisco Acap 35021-A-K9 access points.
Any given assistance is greatly appreciated.
BDF TECHHere are the steps:
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/68835-wlc-upgrade.html
FUS upgarde procedure:
http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/fus_rn_OL-31390-01.html
Make sure you take a downtime for atleast 60 minutes for all process.(software + FUS). -
How to upgrade/downgrade an existing Arch from external media?
Hi there!
After last upgrade of kernel and video drivers i got a blank screen with no tty console.
I read couple of threads in » Pacman & Package Upgrade Issues
I found out that the solution would be "to boot from external media, chroot and downgrade kernel to 3.9.9"
Questions:
1.How would i do that?
2.Should i downgrade or upgrade (if with the new kernel the issue is fixed)?
Thank you!https://wiki.archlinux.org/index.php/US … tion_Media
https://wiki.archlinux.org/index.php/Chroot
https://wiki.archlinux.org/index.php/Downgrade
If the new kernel is fixed, that's the best answer by far. If it's not, downgrade until it is.
Last edited by Scimmia (2013-08-10 15:54:35) -
How to upgrade SSD firmware without the CD drive?
Hello
I have a X300 (6478-1HP) with the optional battery instad of the CD-ROM drive. That drive just stopped working, it just can't read dics anymore. I'm happy with my Samsung USB CD-ROM, runs great.
But how can I upgrade my SSD drive with the new firmware just released? The readme.txt states that we should not use USB drives to do it. What now? Anyone tried already?
Thanks,
Rebêlo.
www.rebelo.orgYou HAVE to have access to a Computer to upgrade your iPad. You can NOT do it thru 3G/WiFi. That is why you are getting that message.
Hope this helps -
How to upgrade the firmware of the WRT54G v.5 router
Please refer to this link:
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=3410
Message Edited by Vince_02 on 06-11-2006 05:35 PMThanks Vince
-
MSI DR4-A,How do I upgrade the firmware? (How do I flash?)
I can't use my MSI DR4-A for anything now since i dont know how to upgrade the firmware (flash) can somebody please explain how to flash it better then the ReadMe file the lates update came with..cause i seriously don't understand the readme neither does any of my friends..so please help me someone...
I updated the Firmware yesterday, what I did was the following.
Downloaded the latest (2.50) firmware from the download page, and putted all the files (DVFLASH.EXE and 250D.BIN) on a floppy.
Went to Bootdisk.com and downloaded the win98SE OEM bootdisk (as suggested by others here) and ran the exe by using a second floppy.
Rebooted my pc with the newly created bootdisk in the floppy drive.
After a while you'll see the prompt.
Replace the bootdisk with the disk where DVFLASH.EXE and 250D.BIN is on and make sure the promt says A:\ (assuming this is your floppy drive).
Then type DVFLASH 250D.BIN
(also assuming the version is 250D.bin, which it is now atm). -
How to upgrade IP/KVM Console AF620A via serial interface?
Hi
I've got a "HP 1x1Ex8 KVM IP Console Switch G2 with Virtual Media CAC Software - AF620A" which is not booting correctly anymore.
Symptoms:
- blank screen
- status leds constantly blinking
- serial output hangs after "Booting:1.2.10.15038"
Hooking up to the serial interface, the terminal gives me, that the current version as well as the alternate version of the used firmware is 1.2.10.15038. As far as I was able to find out, I should upgrade to the latest firmware in order to get rid of the problem and make the device usable again.
My problem is, that I don't know how to upgrade the firmware via the serial console, knowing that the device is not booting up the firmware.
Yes, I've done a factory reset as well as a configuration reset. No change ...
I've opened up the case to see if there is any hardware reset button, but there is none. The only thing I found is a 4pin header labeled "HDR2" but neither the user guide not the technical guide gives any details about the interior of the device (of course not ...).
Has anyone had the same problem with this or any similar device?
Or does anyone has a good advice what I could try to revive the KVM?
greetingsI finally got through the helpline, but as my device is out of warranty, the official solution for my problem is to buy a new device!
Ending is better than mending ... welcome our the brave new world ... -
What file do I use to upgrade WRT54GL firmware?
Just got a new WRT54GL wirless router and am interested in how to upgrade the firmware. Downloaded WRT54GL_v4.30.9_US.tgz from the Linsys support/download website. It's a zip file that contains WRT54GL_v4.30.9_US.tar which is another zip file that contains the source files. But there's no compiled file. Where can I get an executable that can be downloaded to the router?
You'd have to ask Linksys that question....but if the firmware for the 1.0 and the 1.1 are the same, they may just have forgotten to update the page...or they may just consider that if there are no firmware updates for the 1.1, why bother posting it...after all, no one should ever need to re-flash their routers, right??
Tomato 1.25vpn3.4 (SgtPepperKSU MOD) on a Buffalo WHR-HP-G54
D-Link DSM-320 (Wired)
Wii (Wireless) - PS3 (Wired), PSP (Wireless) - XBox360 (Wired)
SonyBDP-S360 (Wired)
Linksys NSLU2 Firmware Unslung 6.10 Beta unslung to a 2Gb thumb, w/1 Maxtor OneTouch III 200Gb
IOmega StorCenter ix2 1TB NAS
Linksys WVC54G w/FW V2.12EU
and assorted wired and wireless PCs and laptops -
How do I install a firmware upgrade on a 300 series switch?
I have downloaded the ros file, but can't find how to apply it. I know this information must be out there, but can't find it. Thanks
Hello Henry,
Once logged into the switch you will want to go to the following location Administration > File Management > Upgrade/Backup Firmware.
From here you will select the file you downloaded and upload it to the switch. Once this process is complete, the firmware will now be located on the switch on image 2.
You will then go to the Active Image tab right below. From here you will change to image 2. Please make sure to save your configuration at this point and then reboot the switch.
Maybe you are looking for
-
Regarding Sap IS-Oil (SD MM) business process
Hi All, I am currently working as Abap Consultant for a client who has Oil business, having their own refineries etc. I have good knowledge of SD & MM flow. Can anyone please give me some reference link or site name or PDF book for Sap IS-oil busines
-
Thread Pool Is Not Terminating
Hi All; I am trying to stop java program which are running continuously in a while loop and loop is looking for a stop file. When I am trying to stop java program through a Unix stop script, which will create a stop file . It is working fine with nor
-
What is the endpoint URI of a proxy service?
Hello, I want to create a SOAP client that will access an ALSB-hosted proxy service, but I don't know the URL needed to get to the web service. Within ALSB's console, I can easily test the proxy web service but don't know how to access it externally.
-
When I login to hotmail via web can log in with same details being refused by thunderbird for name and password. option box opens asking to try another password, but again, it IS the correct password.
-
Detect End User Computer for Incident Request -SCSM 2012 Self Service Portal
Hi all, We want to automatically select user computer name when user submitting a incident request through SCSM 2012 Self Service Portal. I would like to know is there are OOB feature or workaround without code. Our client does not want to select c