How to upgrade Exchange 2007 from Sp1 to SP3 RU13
Hi everyone, I have a mail system Exchange 2007 SP1 CAS and HUB with 3 servers.
The mailboxes are on a Windows Server 2008 Failover Cluster.
Domain controllers are Windows Server 2003 SP2
I have to update the mail system with Service Pack 3 and RU13.
Does anyone can tell me the procedure? where I have to start by the CAS / HUB or cluster mailboxes?
How do I update the cluster of mailboxes, the resources on the active node and update it, or liability?
There's something I have to take intoaccount before upgrading?
I can upgrade directly to SP3? or I have to upgrade before SP2? thank you very much
Microsoft Certified IT Professional Server Administrator
http://technet.microsoft.com/en-us/library/bb885043(v=exchg.80).aspx
Applying Exchange 2007 Update Rollups to Clustered Mailbox Servers
and
http://technet.microsoft.com/en-us/library/ee221147(v=exchg.80).aspx
How to Install the Latest Service Pack or Update Rollup for Exchange 2007
and, yes, you can go straight to SP3
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.
Similar Messages
-
Uppgrading Exchange 2007 from sp1 to sp3 on small business server 2008 sp1
Hello everyone
I know this topic has been discused many time in this froum. but i have to ask it again in my exact situation.
I have a realy unstable and unsafe server which i am planing to migrate all the apps and services to some virtual servers soon.
first migrating is Exchange. i have Exchange 2007 sp1 on my server sbs 2008. i have my DC,AD, dns, DHCP, File, etc on the same server as well . So that is way it is scary for me (as i am not really experienced) to even upgrade one service pack.
Now, i want to know if anyone did it before. What should i expect during upgrading or after that? so i can be ready for that?
which kind of backup can save me if somethings happens to my Exchange? is there any way to install the new Exchange 2007 and sp3 rollup 10 and then migrate all databases and mailboxes to that new server? if yes, how to do that?
Thanks
NimaHi Nima,
Ok, I know your concern. Please make sure you have read the above KB I provided before installing SP3 for Exchange 2007. What's more, you need to make sure you right mouse click and run as admin to install it.
Moreover, here is a thread about migrating Exchange 2007 SP3 to Exchange 2013 for your reference.
Migrate SBS 2008 R2 running Exchange 2007 to Windows Server 2012 Exchange 2013
http://social.technet.microsoft.com/Forums/en-US/4c9b96c2-fd5e-4fbe-8b3a-fb5b3ab29da8/migrate-sbs-2008-r2-running-exchange-2007-to-windows-server-2012-exchange-2013?forum=smallbusinessserver
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support -
Upgrade Exchange 2010 from SP2 to SP3 RU4
Hi All,
We are planning to upgarde Exchange 2010 SP2 servers with stretched dag across 2 AD sites to SP3 RU4.
I have few questions.
1. We are planning to Upgrade HUB/CAS servers in both the sites in first week.
2. Then we are planning to upgrade mailbox servers in the next week in both sites.
3.
Do you think this is a good approach. Can some one please share best pratices document as we are using F5 load balancing.Hi,
Vishwanath's suggestions are pretty helpful. Besides that, we should make sure that the update process should be managed to prevent all of the DAG members from being offline at the same time.
Here is an article about how to install Update Rollups on Database Availability Group Members for your reference.
Installing Update Rollups on Database Availability Group Members
http://technet.microsoft.com/en-us/library/ee861125(v=exchg.141).aspx
Best regards,
Belinda
Belinda Ma
TechNet Community Support -
I'm trying to remove Exchange 2007 from an SBS 2008 server
(Server 2008 Standard FE). My ultimate goal is to completely remove the SBS 2008 Server from the network environment.
We have an Exchange 2010 Coexistence Scenario and Mailboxes/Public Folders/etc have been moved over to the 2010 mail server, on Server 2008 R2.
I have moved all Shares, FSMO roles, DHCP, DNS, etc over to their respective servers. We have two full blown DC's in the environment.
I'm ready to remove Exchange 2007 from SBS 2008 and DCPROMO the server. I can NOT seem to find a TechNet article that shows me how
to proceed in this kind of scenario. I am trying to use the TechNet article:
http://technet.microsoft.com/en-us/library/dd728003(v=ws.10).aspx
This article references Disabling Mailboxes, Removing OAB, Removing Public Folder Databases, then uninstalling Exchange using the Setup Wizard.
When I go to Disable Mailboxes I get the following error:
Microsoft Exchange Error
Action 'Disable' could not be performed on object 'Username (edited)'.
Username (edited)
Failed
Error:
Object cannot be saved because its ExchangeVersion property is 0.10 (14.0.100.0), which is not supported by the current version 0.1 (8.0.535.0). You will need a later version of Exchange.
OK
I really don't see why I need to Disable Mailboxes, Remove OAB and Public Folder Databases since they have been moved to 2010. I just want
to remove Exchange 2007 and DCPROMO this server (actually I just want to remove any lingering Exchange AD Objects referring to the SBS 2008 Server, using the easiest and cleanest method possible).
Can someone point me in the right direction?
Thanks!Hi,
Based on your description, it seems that you are in a migration process (migrate SBS 2008 to Windows Server
2008 R2). Now, you want to remove Exchange Server and demote server. If anything I misunderstand, please don’t hesitate to let me know.
On current situation, please refer to following articles and check if can help you.
Transition
from Small Business Server to Standard Windows Server
Removing SBS 2008 –
Step 1: Exchange 2007
Removing SBS 2008 – Step 2:
ADCS
Removing
SBS 2008 – Step 3: remove from domain / DCPROMO
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
Hope this helps.
Best regards,
Justin Gu -
How to view Exchange 2007 Public folders, calender on iphone
How to view Exchange 2007 public folders mainly the calenders on the iphone?
Not possible.
Sent from my iPad. -
Remove Exchange 2007 from an Exchange 2013 coexistence.
Hey everyone,
I've just installed Exchange 2013 on a new server and all is working great. It is currently in coexistence with our old Exchange 2007 server. I've since shut the server down and Exchange 2013 has been working without issue. However, I haven't
been able to find any articles on this matter so I figured I would ask the question here.
How do you remove Exchange 2007 from the coexistence. Do I just uninstall Exchange 2007 from the old server and it will remove itself from the server and the domain? Any help/link on this matter would be greatly appreciated.
Thank you,
ChrisHi Simon,
I am about to do the same exercise as Chris, I just would like some clarity.
1) When you say mailbox Database, do you mean make sure there are no more mailboxes that you want to move over, or are you actually meaning delete the physical DB on the exchange 2007 server.
2) If there is no use of public folders does anything need to happen?
Thanks,
Terry -
How to upgrade my mackbookpro from 10.5.8 to date
how to upgrade my mackbookpro from 10.5.8 to date
The first step in Upgrading... is to Snow Leopard = OS X 10.6.x
It is Not available as a download... It is a Paid Upgrade.
Do this first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs > http://support.apple.com/kb/SP575
If so... Purchase a Snow Leopard Install Disc...
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
After the Successful Install, run Software Update to get the latest updates for Snow Leopard and iTunes.
Be sure to make a Backup of your Current System Before Upgrading...
Next... MAVERICKS...
Check here to see if your Mac is compatible...
http://www.apple.com/osx/how-to-upgrade/
If so... would recommend at least 4GB of RAM... if not 8 GB
It is important to get the Correct and Matching RAM
See Here > OWC RAM > http://www.macsales.com
The above site also has videos on how to Install RAM should you need it...
Also... Check here for compatibility of 3rd party Software you may be using...
Also note that Rosetta is no longer supported in Mavericks, Mountain Lion and Lion.
http://roaringapps.com/apps:table -
Can i upgrade exchange 2007 to exchange 2013 on same small business server 2008 machine?
Hi,
I have small business server 2008 with exchange 2007 installed in my organization,
Now I need to upgrade exchange 2007 to exchange 2013 on same small business server 2008 standard edition.
I already tried to upgrade but not successful.
can i upgrade exchange 2007 to exchange 2013 on same small business server 2008 machine or any alternate through which it is possible.
Please share any MS article if it not possible.
Thank you in advance
Regards
arun avHi Arun,
Its really great that you want to move and upgrade old Exchange to new Exchange server. The manual steps and guide is already recommended to you.
Moreover, I would like to recommend you to use an automated tool to upgrade your Exchange server 2007 to exchange 2013. I have tried and test tool to do Exchange Migration 2007 to 2013. You can follow the link
http://www.exchange2007to2013migration.exchangemigrationtool.com/. It will also help you to do Intra-Cross forest migration if you required.
Hopefully my recommendation will surely help you.
Thanks,
Walter -
How to upgrade DB node from 11.0.1.7 to 11.2.0.2 with EBS 12.1.2
Is Note 1367644.1: Interoperability Notes Oracle EBS R12 with Oracle Database 11gR2 (11.2.0.2) (Doc ID 1367644.1) can solve this issue?
In this note, the instruction as:
Instructions for upgrading an Oracle E-Business Suite Release 12 database server and instance from Oracle 10g Release 2 (10.2.0), Oracle Database 11g Release 1 (11.1.0), or earlier versions of Oracle Database 11g Release 2 (11.2.0) to the latest version of Oracle Database 11g Release 2 (11.2.0).
Is this suitable for DB 11.0.1.7?
Thanks,
JackieHow to upgrade DB node from 11.0.1.7 to 11.2.0.2 with EBS 12.1.2
Is Note 1367644.1: Interoperability Notes Oracle EBS R12 with Oracle Database 11gR2 (11.2.0.2) (Doc ID 1367644.1) can solve this issue?
In this note, the instruction as:
Instructions for upgrading an Oracle E-Business Suite Release 12 database server and instance from Oracle 10g Release 2 (10.2.0), Oracle Database 11g Release 1 (11.1.0), or earlier versions of Oracle Database 11g Release 2 (11.2.0) to the latest version of Oracle Database 11g Release 2 (11.2.0).
Is this suitable for DB 11.0.1.7?The document is applicable and you can use it to upgrade the database from 11.1.0.7 to 11.2.0.2
Please note that you can upgrade to 11.2.0.3 (latest patchset certified with R12) as per (Interoperability Notes EBS R12 with Database 11gR2 [ID 1058763.1]).
Thanks,
Hussein -
HT6114 how to upgrade to Mavericks from Lion
Hi i would like to know exactly how to upgrade to Mavericks from lion. I'm very comfused and have tried to find information about this but all I found was someone that asked if it was possible to do it and got the answer that it was in fact possible, but nobody said how to do it -_-
Please help
Thanks in advanceWell, if your Mac meets the system requirements here:
http://www.apple.com/osx/specs/
simply go to the app store and download Mavericks or simply click on upgrade now on this page:
http://www.apple.com/osx/ -
How to upgrade iphone 3GS from 3.0.1 to 3.1.3
how to upgrade iphone 3GS from 3.0.1 to 3.1.3
I dont want to upgrade it to 4.0 yet.
Just up to 3.1.3 from 3.0.1
how can i do it.That's because Apple is no longer signing v3.1.3 nor any firmware other than iOS4. You could try following a downgrade to v3.1.3, see these:
http://discussions.apple.com/search.jspa?threadID=&q=Downgrade+iPhone&objID=c201 &dateRange=last30days&userID=&numResults=30&rankBy=10001
This guide works for 3G but not 3GS, though there are some suggestions for 3GS users in there:
http://m.lifehacker.com/5572003/how-to-downgrade-your-iphone-3g%5Bs%5D-from-ios- 4-to-ios-313 -
Upgrading from SP1 to SP3, Exchange 2007
Hi,
I am preparing for an Exchange 2007 staged migration to Office 365. After email migration is complete I will be taking my Exchange server offline. I am presently running Exchange 2007 SP1. I need to download and apply Service Pack
3 before I begin migrating. Thus far I have been unable to find a download for SP3 only. I am aware that I can download the full version of Exchange 2007 SP3 but I am looking for SP3 only. Any information would be greatly appreciated.
Thanks.Hi,
Based on my experience , every Exchange update package includes the whole Exchange server. And when we install the package, it will automatically check and install the updated features. And you can refer to the above articles that others have provided.
Thanks,
Angela Shi
TechNet Community Support -
Upgrade Exchange 2007 sp1 to sp3
Good day,
I have 3 exchange 2007 sp1 servers in my domain in different subnets. I need to upgrade all of them to sp3. i started with one branch server that is not in the same site with the domain schema master and im getting errors during instalation preparations
that - " Organization Checks ......................... FAILED
Setup needs to contact the Active Directory schema master but this computer
is not in the same Active Directory site as the schema master (Default-First-Si
te-Name).
Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have not been created, and setup cannot cre
ate them because the local computer is not in the same domain and site as the sc
hema master. Run setup with the /prepareAD parameter on a computer in the domai
n toyota and site Default-First-Site-Name, and wait for replication to complete.
Hub Transport Role Checks ......................... FAILED
Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have not been created, and setup cannot cre
ate them because the local computer is not in the same domain and site as the sc
hema master. Run setup with the /prepareAD parameter on a computer in the domai
n toyota and site Default-First-Site-Name, and wait for replication to complete.
Client Access Role Checks ......................... FAILED
Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have not been created, and setup cannot cre
ate them because the local computer is not in the same domain and site as the sc
hema master. Run setup with the /prepareAD parameter on a computer in the domai
n toyota and site Default-First-Site-Name, and wait for replication to complete.
Mailbox Role Checks ......................... FAILED
Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have not been created, and setup cannot cre
ate them because the local computer is not in the same domain and site as the sc
hema master. Run setup with the /prepareAD parameter on a computer in the domai
n toyota and site Default-First-Site-Name, and wait for replication to complete.
My question is do i need to first upgrade the one in the same site with the scema master? and what will happen to the other remote server in different subnets?? how will i upgrade them given these errors?
Regards,
BrianGood day,
I have 3 exchange 2007 sp1 servers in my domain in different subnets. I need to upgrade all of them to sp3. i started with one branch server that is not in the same site with the domain schema master and im getting errors during instalation preparations
that - " Organization Checks ......................... FAILED
Setup needs to contact the Active Directory schema master but this computer
is not in the same Active Directory site as the schema master (Default-First-Si
te-Name).
Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have not been created, and setup cannot cre
ate them because the local computer is not in the same domain and site as the sc
hema master. Run setup with the /prepareAD parameter on a computer in the domai
n toyota and site Default-First-Site-Name, and wait for replication to complete.
Hub Transport Role Checks ......................... FAILED
Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have not been created, and setup cannot cre
ate them because the local computer is not in the same domain and site as the sc
hema master. Run setup with the /prepareAD parameter on a computer in the domai
n toyota and site Default-First-Site-Name, and wait for replication to complete.
Client Access Role Checks ......................... FAILED
Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have not been created, and setup cannot cre
ate them because the local computer is not in the same domain and site as the sc
hema master. Run setup with the /prepareAD parameter on a computer in the domai
n toyota and site Default-First-Site-Name, and wait for replication to complete.
Mailbox Role Checks ......................... FAILED
Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have not been created, and setup cannot cre
ate them because the local computer is not in the same domain and site as the sc
hema master. Run setup with the /prepareAD parameter on a computer in the domai
n toyota and site Default-First-Site-Name, and wait for replication to complete.
My question is do i need to first upgrade the one in the same site with the scema master? and what will happen to the other remote server in different subnets?? how will i upgrade them given these errors?
Regards,
Brian
Prepare the domains as required. You have to prep the forest first for SP3 before upgrading Exchange itself
Follow all the instructions
http://technet.microsoft.com/en-us/library/bb125224(v=exchg.141).aspx
Prepare Active Directory and Domains
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied. -
How to import PST to Exchange 2007 from Exchange 2010
Hello everyone,
I have a problem with importing PSTs to Exchange 2007 mailboxes.
I exported PSTs without problem on Exchange 2010 using New-MailboxExportRequest but I run in several problems with importing PSTs on Exchange 2007.
I created VM with Windows XP, 32bit Exchange Management tools and Outlook 2007 because it's needed for importing/exporting in Ex2007 Envinroment. I created separate account for imporing PSTs, grant him rights to Exchange server and specific mailbox but I still
got this error while importing: Error occurred in the step: Approving object. An unknown error has occurred., error code: -2147219968 or sometimes import run without any error but no messages are imported (also it is processed very fast).
I use Import-Mailbox -identity <user> -PSTFolderPath <Path>
Do you know what causing this issue and how to fix it or how to import PST to Exchange using different aproach?
Thank youHi,
Please make sure that your account has proper permissions
Exchange Server Administrators role
Local Administrators group for the target server
Full access to the target mailbox
In addition. what’s size of that PST file? If it is too large, it might be corrupted and we may need to export it again from Exchange 2010.
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support -
How to stop Outlook 2007 from changing my telephone number format?
I'm using Windows 7 and Outlook 2007 (and Exchange 2007 SP1).
Now, in Outlook's contact, whenever I enter a telephone number, the stupid Outlook 2007 always tries to be smart and add brackets to the first few digits! There's no brackets in tel number. How could I make it stop from being too smart and changing anything?I've found another PC with XP and Outlook 2007, but I still can't find any service called "Windows Dialing". But I tried it anyway. Guess what I got: in this computer, a normal local telephone format isn't changed. But when the number is in long distance format, ie +XX YYYYYYY, Outlook 2007 stupidly removes the '+' sign in front of it!
I then tried in my first PC to see what would happen to international telephone number format.... it's OK, the '+' sign isn't deleted.
What a f**k! What's this ____ called Outlook 2007 which tries to reformat things it can't understand??
I have exactly the same problem - I am in the UK and have a pile of UK numbers stored in international format (which most cell phones recognise and some generate automatically from incoming calls). So the number would be entered as +44 1234 56789. Outlook strips off the + and, because I sync with my pda, the numbers get exported to it in a broken state :-(
In the UK, we don't drop leading digits - to dial a number I either dial 01234 56789 or +44 1234 56789. We don't really use local numbers a lot in the UK - it doesn't make any difference within a local area if I dial the full code, just the local number or the international version. So there is no need for Outlook to do anything.
This is extremely aggravating - sure ly Outlook is not hard coded to use US phone dialling methods?
There must be a way to disable the automatic parsing of numbers - if not it is bug that needs fixing, IMHO...
Rgrds
Peter
Maybe you are looking for
-
I Shut down my Mac by holding in the power button after my iMac froze and now when I try to turn it back it on all I get is the grey screen with Apple loge and the timer and doesn't get any further. I have tried the diagnostic test but nothing was f
-
Very slow Header and Footer load
Hi all,I have a problem using the Content Server.We I try to brand my portal with header and footer created by CS all the pages are loaded slowly.Looking at the PTSpy I see the following lines: InetHostBase::ReleaseSock() <10.223.164.108:8080> Closin
-
Reader acting strange with forms
I have an employee who just got a new computer which has Vista on it. With the new computer, it has Acrobat Reader 8. Ever since the computer, she'll bring up forms that she uses on a daily basis and she's unable to type in the form fields OR she can
-
Document versions making time machine have huge backups?
Time machine was working fine until i recently restored a backup last week. Afterwards i backed up everything but now i have noticed that every backup is over 800mb, for no reason. To test this, I backed up my mac, it was a 1.5GB backup, then 1 min l
-
BC4J Client Data Model Definition Wizard does not dismiss
I'm a newbie trying to learn JDeveloper on my own to advance my career. I am following examples given in the Oracle9i JDeveloper Handbook by Koletzke, Dorsey, and Faderman. Everything has worked great so far until now. With the BC4J Client Data Model