How to upgrade Exchange 2013 host OS to Server 2012 R2

Currently in our environment we have Exchange 2013 (Client Access and Mailbox on one server) (no service pack) built on Server 2012 machine. I'd like to rebuild the Exchange server on a new Server 2012 R2 machine. Are there any automated tools for transferring
client access configuration(accepted domains, connectors, etc) and can I just unmount the databases from the current server and mount them on the new, or do i have to create new mailbox databases and migrate the mailboxes? Do you guys know any tutorials for
this scenario? Thanks in advance!

Hi,
You need to setup a new Exchange 2013 SP1 or later version on Windows server 2012 R2 at first.
Secondly, migrate all the mailboxes from old Exchange 2013 to the new Exchange 2013.
Thirdly, change the mail flow.
At last, when everything is ok on new Exchange 2013, you can decommission the old Exchange.
For more information, here is a thread about migration from Exchange 2010 to Exchange 2013 for your reference.
Migration From Exchange 2010 to Exchange 2013
http://www.petenetlive.com/KB/Article/0000788.htm
Note: Microsoft is providing this information as a convenience to you. The site is not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of information found there. Please make sure that you
completely understand the risk before retrieving any suggestions from the above link.
Hope it helps.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

Similar Messages

Error During install Exchange 2013 through Powershell on Server 2012 "Mailbox role: Client Access service"

Dear all
During install Exchange 2013 through Powershell on Server 2012 I got this error in Mailbox role: Client Access service :
The following error was generated when "$error.Clear();
$BEVdirIdentity = $RoleNetBIOSName + "\OWA (Exchange Back End)";
new-OwaVirtualDirectory -Role Mailbox -WebSiteName "Exchange Back End" -DomainController $RoleDomainController
set-OwaVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
" was run: "An error occurred while creating the IIS virtual directory 'IIS://MONAMBX2.mona.local/W3SVC/2/ROOT/o
wa' on 'MONAMBX2'.".
The following error was generated when "$error.Clear();
$BEVdirIdentity = $RoleNetBIOSName + "\OWA (Exchange Back End)";
new-OwaVirtualDirectory -Role Mailbox -WebSiteName "Exchange Back End" -DomainController $RoleDomainController
set-OwaVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
" was run: "The operation couldn't be performed because object 'MONAMBX2\OWA (Exchange Back End)' couldn't be fo
und on 'MonaDc1.mona.local'.".
Any advice please !!

I can't answer your question but I had a similar issue when I was trying to move our mailbox database off the C: drive. Our environment still has an Exchange 2007 server in it and when I was trying to move the database on the 2013 server, I would get
error messages saying the database does not exist. It seemed like it was trying to move the database on the 2007 server from the similar error messages that I was getting. To get around it, I deleted the database and created a new one on the drive
where we wanted it.
I discovered this when I was configuring the Antispam settings. I deleted our 2007 settings, added them to the 2013 shell, the settings appeared on our 2007 server. The shell on 2013 was making changes to 2007.
I'm not sure if there is a "Get|Set or New" command that I/we should be using when this happens. Or maybe my issues will be fixed if I just remove the Exchange 2007 server? I'm not ready to do that yet because I can't configure the spam filtering
on 2013 yet with its shell not being able to make the changes that we need.
I don't know if your environment is in coexistence mode like mine.
Hopefully someone else out there has an answer or can tell us when/how the shell can make the appropriate changes to the 2013 server. Does this happen after the 2007 server is removed?

Trying to Install Exchange 2013 SP1 on Windows Server 2012 R2 but getting an error on mailbox role install

On Step 1 of 7, the "Mailbox role: Client Access service," I got an error during installing:
Error:
The following error was generated when "$error.Clear();
Install-ExchangeCertificate -WebSiteName "Exchange Back End" -services "IIS, POP, IMAP" -DomainController $RoleDomainController -InstallInTrustedRootCAIfSelfSigned $true
if ($RoleIsDatacenter -ne $true -And $RoleIsPartnerHosted -ne $true)
Install-AuthCertificate -DomainController $RoleDomainController
" was run: "Could not grant Network Service access to the certificate with thumbprint 8FCF29D8F3A4D8E3D649BF4231DC9B4641D5A077 because a cryptographic exception was thrown.".
I couldn't find help anywhere on this. Can someone help me? If you need any more info, please let me know ^_^

Try the solution provided in this thread:
https://social.technet.microsoft.com/Forums/exchange/en-US/e4b23442-e3c9-4611-9fde-fac848ca217b/error-could-not-grant-network-service-access-to-the-certificate-with-thumbprint?forum=exchangesvrdeploy
Thanks,
MikeV
MCSE 2012
If the above solutions doesn't work, try moving the certificate with the thumbprint identified in the error, to the Trusted Root Certification Authority folder
Thanks,
MikeV
MCSE 2012

How to configure Exchange 2013 OWA with Single Sign On

Hi All ,
How to configure Exchange 2013 OWA with Single Sign On ?
Thanks .

Hi,
From your description, I am not quite sure what you really want to achieve. Could you explain it furthermore? If you need to set up Exchange 2013 OWA single sign on with Exchange 2010, here is a helpful thread for your reference.
Exchange 2013 OWA Single Sign on with Exchange 2010
https://social.technet.microsoft.com/Forums/en-US/2899ebfc-8622-4cdc-8d77-d76b607618f7/exchange-2013-owa-single-sign-on-with-exchange-2010?forum=exchangesvrdeploy
If that is not your case, please feel free to tell me.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

Import MS Access 2013 tables into SQL Server 2012

Hi there,
Is there a step by step example somewhere showing how to import an MS Access 2013 table into SQL Server 2012?
I have read the existing posts and don't see a definitive answer.
I have installed MS Access 2010 engine, first 32 bit then 64 bit.
I have installed the MS Access 2013 runtime on my server.
I use the Office 2015 Access Database Engine OLE DB Provider.
I get the error:
Error 0xc0202009: Source - APEntries [1]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E37.
Error 0xc02020e8: Source - APEntries [1]: Opening a rowset for "`TableName`" failed. Check that the object exists in the database.
The post regarding the above errors doesn't resolve the issue.
I have full administrative permissions on the server.
What is the trick to making this work?
Thanks,
Ric
Ric Miller

Hi there,
I tried the exact same operation on a third machine.
This machine has Windows 8.1 64 bit, SQL Server 2012 64 bit, MS Office 2013 Plus 32 bit.
I am the administrator on this machine.
I installed this:
Microsoft Access Database Engine 2010 Redistributable 32 bit (because I have MS Office 2013 plus 32 bit installed.)
From here:
http://www.microsoft.com/en-us/download/details.aspx?id=13255
It won't let me install the 64 bit version without uninstalling MS Office 32 bit.
I created an MS Access database on this machine using MS Access 2013 and created a table with 3 records.
I used the "Import and Export Data (32 bit)" from the start menu.
After I installed the "Database Engine 2010 32 bit" driver above, I now have the option of "Office 2015 Access Database Engine OLE DB Provider" as Data Source which I did not have prior to doing this installation.
I selected the driver and added the Properties of the Data Source Name file location of the MS Access file. I am using a blank password.
I go thru the same sequence of selecting a table to import and after running the result is the same:
Error 0xc0202009: Source - APEntries [1]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E37.
"Error 0xc02020e8: Source - APEntries [1]: Opening a rowset for "`TableName`" failed. Check that the object exists in the database."
This seems to be consistent across three machines with three operating systems with the same files and the same result.
I understand that some people have gotten this to work.
I would appreciate it if anyone can report an error in the above procedure to me.
Thanks,
Ric
Ric Miller

Cannot install SharePoint 2013 with SP1 on server 2012 R2. IIS configuration error

Hey Guys,
I'm experiencing a problem which seems to be common considering the number of posts I've found about it, but none of the provided solutions worked for me.
I'm simply trying to install SharePoint 2013 with SP1 on a Windows Server Standard 2012 R2.
I've downloaded from the MS Volume Licensing website the "SharePoint Server 2013 with SP1" ISO file : SW_DVD5_SharePoint_Server_2013w_SP1_64Bit_English_MLF_X19-36118. So
this is the slipstreamed version which is supposed to bring compatibility with 2012 R2.
As I do not have direct access to the Internet I need to perform an offline installation. I also downloaded all prerequisities. When I run prerequisiteinstaller.exe with the necessary arguments, I get the following :
(Full log file is below)
I've tried the following :
- Restarted the server multiple times
- Manually removing/adding IIS role + restart
- Running the prerequisiteinstaller.exe from the DVD or from an extracted version
- Manually installing the prerequisities
- Installed .Net 3.5 as recommended here (http://social.technet.microsoft.com/Forums/office/en-US/0b597d35-b02d-4236-894d-38efc0c7c6f6/sharepoint-2013-with-sp1-install-on-windows-server-2012-r2?forum=sharepointgeneral)
None of the worked. So I'm stuck and I must completed the installation of this before the end of the week for an important project !
Your help would be greatly appreciated.
this is the complete log file :
2014-09-09 14:30:26 - Processor architecture is (9)
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - Common Startup
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
2014-09-09 14:30:26 - Trying to remove the startup task if there is any.
2014-09-09 14:30:26 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
2014-09-09 14:30:26 - Successfully deleted the startup task
2014-09-09 14:30:26 - Analyzing the following command line argument:
2014-09-09 14:30:26 - /continue
2014-09-09 14:30:26 - Continuing after restart
2014-09-09 14:30:26 - Details of the current operating system:
2014-09-09 14:30:26 - Major version number of the operating system: (6)
2014-09-09 14:30:26 - Minor version number of the operating system: (2)
2014-09-09 14:30:26 - Build number of the operating system: (0X23F0=9200)
2014-09-09 14:30:26 - Major version number of the latest Service Pack: (0)
2014-09-09 14:30:26 - Minor version number of the latest Service Pack: (0)
2014-09-09 14:30:26 - Platform ID of the operating system: (2)
2014-09-09 14:30:26 - Product suites available on the operating system: (0X110=272)
2014-09-09 14:30:26 - Product type of the operating system: VER_NT_SERVER
2014-09-09 14:30:26 - Product type: (0)
2014-09-09 14:30:26 - OS type: (2)
2014-09-09 14:30:26 - Configuring the application's property sheet...
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Windows Management Framework 3.0
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - PowerShellVersion
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 4.0
2014-09-09 14:30:26 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft .NET Framework 4.5
2014-09-09 14:30:26 - Reading the following DWORD value/name...
2014-09-09 14:30:26 - Install
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-09-09 14:30:26 - The value is (1)
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - Version
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 4.5.51641
2014-09-09 14:30:26 - A post release .NET 4.5 is installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Windows Identity Foundation (KB974405)
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 -
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 6.1.7600.0
2014-09-09 14:30:26 - The prerequisite above is already installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-09-09 14:30:26 - Reading version of the following file...
2014-09-09 14:30:26 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-09-09 14:30:26 - GetFileVersionInfoSize failed (-2147024894)
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - Version
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 10.51.2500.0
2014-09-09 14:30:26 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Windows Server AppFabric
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - ProductVersion
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Windows Identity Foundation (KB974405)
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 -
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft Information Protection and Control Client
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 -
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft WCF Data Services 5.0
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - Version
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 5.0.51212.0
2014-09-09 14:30:26 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft WCF Data Services 5.6
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - Version
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.6
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 5.6.61587.0
2014-09-09 14:30:26 - The prerequisite above is already installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-09-09 14:30:26 - Reading the following DWORD value/name...
2014-09-09 14:30:26 - IsInstalled
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-09-09 14:30:26 - Beginning download/installation
2014-09-09 14:30:26 - Created thread for installer
2014-09-09 14:30:26 - "C:\Windows\system32\dism.exe" /online /enable-feature /featurename:NetFX3 /All /norestart
2014-09-09 14:30:27 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:28 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:29 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:30 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:31 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:32 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:33 - Install process returned (0)
2014-09-09 14:30:33 - [In HRESULT format] (0)
2014-09-09 14:30:33 - "C:\Windows\system32\WindowsPowerShell\v1.0\powershell.exe" -ExecutionPolicy Bypass "C:\Users\DADM_T~1\AppData\Local\Temp\PreFB24.tmp.PS1"
2014-09-09 14:30:33 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:34 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:35 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:36 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:37 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:38 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:39 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:40 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:41 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:42 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:43 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:44 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:45 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:46 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:47 - Install process returned (0)
2014-09-09 14:30:47 - [In HRESULT format] (0)
2014-09-09 14:30:47 - "C:\Windows\system32\dism.exe" /online /enable-feature /all /featurename:IIS-ASPNET45 /norestart
2014-09-09 14:30:47 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:48 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:49 - Install process returned (0)
2014-09-09 14:30:49 - [In HRESULT format] (0)
2014-09-09 14:30:49 - "C:\Windows\system32\iisreset.exe" /noforce
2014-09-09 14:30:49 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:51 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:52 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:53 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:54 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:55 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:56 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:57 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:57 - Install process returned (0X426=1062)
2014-09-09 14:30:57 - [In HRESULT format] (0X80070426=-2147023834)
2014-09-09 14:30:57 - Last return code (0X426=1062)
2014-09-09 14:30:57 - Reading the following DWORD value/name...
2014-09-09 14:30:57 - Flags
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Updates\UpdateExeVolatile
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - PendingFileRenameOperations
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SYSTEM\CurrentControlSet\Control\Session Manager
2014-09-09 14:30:57 - Reading the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\RebootRequired
2014-09-09 14:30:57 - Error: The tool was unable to install Application Server Role, Web Server (IIS) Role.
2014-09-09 14:30:57 - Last return code (0X426=1062)
2014-09-09 14:30:57 - Options for further diagnostics: 1. Look up the return code value 2. Download the prerequisite manually and verify size downloaded by the prerequisite installer. 3. Install the prerequisite manually from the given location without any command line options.
2014-09-09 14:30:57 - Cannot retry
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Windows Management Framework 3.0
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - PowerShellVersion
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 4.0
2014-09-09 14:30:57 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft .NET Framework 4.5
2014-09-09 14:30:57 - Reading the following DWORD value/name...
2014-09-09 14:30:57 - Install
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-09-09 14:30:57 - The value is (1)
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - Version
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 4.5.51641
2014-09-09 14:30:57 - A post release .NET 4.5 is installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Windows Identity Foundation (KB974405)
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 -
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 6.1.7600.0
2014-09-09 14:30:57 - The prerequisite above is already installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-09-09 14:30:57 - Reading version of the following file...
2014-09-09 14:30:57 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-09-09 14:30:57 - GetFileVersionInfoSize failed (-2147024894)
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - Version
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 10.51.2500.0
2014-09-09 14:30:57 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Windows Server AppFabric
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - ProductVersion
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Windows Identity Foundation (KB974405)
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 -
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft Information Protection and Control Client
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 -
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft WCF Data Services 5.0
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - Version
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 5.0.51212.0
2014-09-09 14:30:57 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft WCF Data Services 5.6
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - Version
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.6
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 5.6.61587.0
2014-09-09 14:30:57 - The prerequisite above is already installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-09-09 14:30:57 - Reading the following DWORD value/name...
2014-09-09 14:30:57 - IsInstalled
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-09-09 14:32:19 - Opening log file
2014-09-09 14:32:19 - Opened action for user
2014-09-09 14:32:19 - C:\Users\DADM_T~1\AppData\Local\Temp\prerequisiteinstaller.2014.09.09-14.30.26.log

Thank you guys for the quick answer! Muche appreciated
I've tried all suggested solutions, but no luck :-(
- tried http://support.microsoft.com/kb/2765260 > no help and by the way the hotfix provided is not applicable for 2012 R2.
also tried "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_regii -enable -i" and got this :
Microsoft (R) ASP.NET RegIIS version 4.0.30319.33440Administration utility to install and uninstall ASP.NET on the local machine.Copyright (C) Microsoft Corporation. All rights reserved.Start installing ASP.NET (4.0.30319.33440).This option is not supported on this version of the operating system. Administrators should instead install/uninstall ASP.NET 4.5 with IIS8 using the "Turn Windows Features On/Off" dialog, the Server Manager management tool, or the dism.exe command line tool. For more details please see http://go.microsoft.com/fwlink/?LinkID=216771.Finished installing ASP.NET (4.0.30319.33440).
http://social.technet.microsoft.com/wiki/contents/articles/14582.sharepoint-2013-install-prerequisites-offline-or-manually-on-windows-server-2012-a-comprehensive-guide.aspx
> is not for 2012 R2.
For the automated install script (http://gallery.technet.microsoft.com/office/DownloadInstall-SharePoint-e6df9eb8) Craig mentions that the script are not yet compatible
"SharePoint 2013 SP1 and Windows Server 2012 R2 support coming soon
I will be updating this script with support for SharePoint 2013 Service Pack 1 installations along with support for Windows Server 2012 R2 in the near future. Thank you to everyone for the interest in my scripts - it is much appreciated! "

Sharepoint 2013 monitoring on windows server 2012

Hi,
Can we monitor sharepoint 2013 installed on windows server 2012 from scom 2007 R2 CU5??
Thanks
Ashish

Hi,
Yes, SCOM 2007 R2 support SharePoint 2013 Management Pack.
http://www.microsoft.com/en-us/download/details.aspx?id=35590
Niki Han
TechNet Community Support

How to upgrade Exchange Server 2013 CU5 on my site?

My site have four Exchange servers . The four Exchange Servers are installed mailbox and cas roles. The
Dag achieved by the four servers. Please help me to upgrade exchange server 2013 cu5 on the four servers. how to do? Thanks.
北京老马

Hi Martin
Find the below information.
Upgrade Sequence for each Role:
==========================
You should upgrade your Exchange 2013 server roles in the following order:
Client Access
Mailbox
Edge
For DAG members
Upgrade only passive servers in the first phase.
Before you apply the service pack to a DAG member, move all active mailbox database copies off the server to be upgraded and configure the server to be blocked from activation.
Place server in DAG maintenance mode before applying the service pack to any DAG member,
Stop any scheduled tasks or other processes running on the DAG member or within that DAG that could adversely affect the DAG member being upgraded or the upgrade process
Good Luck !!
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

Exchange 2013 hosting

Hi,
we have three different mail domain hosted in different hosting companies, currently we need all mail domain should be work in exchange 2013. so we configured four servers 2 CAS server (RRDNS) 2 MB server with DAG, domains are hala.local hala.com
esys.com ibas.com, hala.com is the main domain. we have 2 public ip for RRDNS. I have created three accepted domain and email policy for each domain groups. Here how can I create mx record for each what type of cert will purchase?
What about internal DNS, do we need to create split dns for all domains?
A record to 213.x.x.11
A record to 213.x.x.12
1Mx record mail.hala.com to 213.x.x.11
2mx record mail.hala.com to 213.x.x.12
Mx1 mail.esys.com point to 213.x.x.11/mx?
Mx2 mail.esys.com point to 213.x.x.12/mx?
Mx1 mail.ibas.com point to 213.x.x.11/mx?
Mx2 mail.ibas.com point to 213.x.x.12/mx?
One SAN cert with single domain name or all domain names what will be common name. if cert name is mismatched always users will get cert warning?. Is there any requirement for UC cert?
Thanks for Your support..
Regards
Riyatanu

Hi
To be more specific refer below
The URLs and hostnames configured returned to clients are the same across the system. It is not possible to configure tenant specific URLs to be returned via AutoDiscover. The recommendation therefore is to create generic and non-specific names that do not
identify any specific tenants.
It is still possible to provide tenants with URLs that match their domain names for services such as OWA or ActiveSync (if they choose to manually configure their device), if that name is also added to the certificate, though it is not generally recommended
for security and privacy reasons.
In this scenario, users can manually enter the URL and end up at the hosters’ site. For example, mail.contoso.com could be added to the certificate used by the hoster. If a user types in
https://mail.yourcompany.com/owa or https://mail.contoso.com/owa they end up at the same site. However, this does result in the names being exposed on the certificate, and anyone viewing the certificate can see those names.
Another option might be to create tenant specific subdomains of one specific hosting domain, which also provides the benefit of allowing you to use wildcard certificates.
For example, you obtain a certificate for *.yourhostingdomain.com and create a subdomain for each tenant who requires a vanity domain,
contoso.yourhostingdomain.com for example. You do not need to add names to the certificate and they can use their tenant specific sub-domain names.
Reference - http://go.microsoft.com/fwlink/p/?LinkId=282659
For DNS you can refer this one as well
http://marckean.wordpress.com/2013/07/12/exchange-2010-autodiscover-for-multi-tenant/
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

How to modify Exchange 2013 TXT(SMS) notifications to not include the subject line or any of the message body of emails

We have a group of users who are not permitted to download/save any emails they receive onto public or personal devices, they are only allowed to log in manually and view their mail through OWA (I realize there are ways to use OWA to download mail, however
the users are explicitly forbidden from doing this, and any countermeasures that can be put in place, are/will be).
With our new Exchange 2013 server, it seems it has the built in capability to send TXT(SMS) notifications instantly when a user receives mail. We would like to allow our users to utilize this feature, however currently, the notification includes not
only the sender of the email, but also the subject line and part of the message body. As it stands, we can't have this as part of the email would then be saved on their device.
I am wondering if there is a way to modify Exchange 2013 to not include the subject or message body, so that our users could at least get an instant notification 1-that they have a new email and 2-who it's from?
Any information would be appreciated, thanks!

We can configure SMS Text Message Notification for various situation like Calendar notifications, Voice mail notifications, Email notifications if your user's Mailbox hosted in Exchange Server 2013
To set up your phone to receive text messages when you want to have Calendar notifications, Voice mail notifications, Email notifications use the steps as follows
Note: Text message fees are applicable and it will appear on your phone bill.
Login to Outlook Web App, click Options > See All Options > Phone > Voice Mail tab.
In the Notifications section, choose one of the following options:
Calendar notifications...
Voice mail notifications...
Email notifications using an Inbox rule...
Turn On Notification
First step is to turn on the notification of text messaging. Click Turn on Notifications
Select Setup Notification: Need to select your operator,
It will request to provide your Mobile Operator.
Note: As of now Exchange Server 2013 supports only the below list of operators.
Locale: United State
Mobile Operator: AT & T, Sprint PCS, T-Mobile, Verizon Wireless
Locale: Canada,
Mobile Operator:Bell Telus Mobility
Locale: Romania
Mobile Operator:Orange Romania
Provide your telephone number. It will send you the passcode on your mobile number.
Type the passcode for confirmation
Calendar Notifications:
On Selecting Calendar Notification: Select the option based upon your requirement.
Email Notification Using Inbox Rule:
Similarly for the text messaging for the email notification, select the option based upon your requirement and setup them up
Exchange Queries

How to introduce exchange 2013 mailbox server in an existing Exchange 2010 Environment

Hi All,
we are planning to install exchange 2013 mailbox server in an Exchange 2010 environment. we have 3 MB servers, 1 CAS 1 HUB which is installed with Exchange 2010 SP3 Enterprise Edition. how to install new exchange server 2013 and i have to add the 2013
servers in to existing DAG and migrate all mailboxes in to 2013 server. Please advise me from the scratch. also will it be create any impact in my existing setup.
Thanks, Venkatesh. "Hardwork Never Fails"

For a step by step follow the deployment assistant
http://technet.microsoft.com/en-US/exdeploy2013/Checklist?state=2419-W-AAAAAAAAQAAAAAEAAAAAAAA%7e
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Upgrading Exchange 2013 to SP1

I have 3 Exchange 2013 servers in my environment. Each server is a CAS and Mailbox server. Each server is also setup in a DAG. I want to update them to SP1 and am a little confused on the upgrade process. Can I just install SP1 on one server at a time
or do I need to make special considerations on which server gets upgraded first? What about the DAG? Thanks.

Hi Will,
Before you install the SP1 you should consider:
Make sure that you have a valid and tested backup of you Exchange Server, Mailbox Database(s) and Active Directory
Make sure that all third-party vendors that you use on your environment support the Service Pack 1
Make sure that there are no backup jobs running the upgrade process
Stop all backup services; and third-party services, such as System Center Operations Manager and so forth
Make sure that you don’t have any pending restart due Windows Updates and/or previous roles/features installed on the server
If you have a DAG then it is important to put the server in maintenance mode
For further info in performing maintenance on DAG Members
here
After all considerations you should update to SP1 after you download it you can run the update from command line o run the setup.
Hope it helps.
David Paris Vicente

Installing / Upgrading Exchange 2013 to Exchange 2010 with a o365 Hybrid environment

Hi
I am trying to install a new server with Exchange 2013 on an environment with an existing Exchange 2010 Sp3. Reason for that is that I have a o365 hybrid environment and need to disconnect my on-line and on-premise e-mail connection. I want to completely
run all my mailboxes on o365 no-longer dependent on on-premise exchange but the Exchange 2010 doesn't have a functionality to 'dismantle' the hybrid.. we need to have exchange 2013.
When I try to install Exchange 2013 I get an error message that I need to upgrade my o365 tenant. : my o365 tenant version is : AdminDisplayVersion : 0.20 (15.1.49.12) :IsUpgradingOrganisation : False.
Is there a better way of updating my environment.
Regards

Post the error from setup log for more information.
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

How to disable Exchange 2013 Outlook Anywhere for internal Outlook client

Hello;
By default, Exchange 2013's Outlook Anywhere is enable for all user mailbox, if I disable the Outlook Anywhere per user mailbox, the user will not able to connect his Outlook client to Exchange 2013. What is the best method to disable the Outlook anywhere
on mailbox but let the Outlook 2013 still able access to Exchg server.
The initial idea is to prevent user from access to company Exchange server from ANYWHERE, we just want to open the Outlook Anywhere for the authorized user only. Looks like Microsoft did not think about the security.
thanks!

Hello;
By default, Exchange 2013's Outlook Anywhere is enable for all user mailbox, if I disable the Outlook Anywhere per user mailbox, the user will not able to connect his Outlook client to Exchange 2013. What is the best method to disable the Outlook anywhere
on mailbox but let the Outlook 2013 still able access to Exchg server.
The initial idea is to prevent user from access to company Exchange server from ANYWHERE, we just want to open the Outlook Anywhere for the authorized user only. Looks like Microsoft did not think about the security.
thanks!
I don't understand your request. If you disabled Outlook Anywhere, Outlook will only be able to connect via IMAP or POP3.
If you want to disable this ability and allow some then perhaps use cas-mailbox to disable in bulk and then enable only those allowed:
http://technet.microsoft.com/en-us/library/bb125264(v=exchg.150).aspx
The MAPIBlockOutlookRpcHttp parameter enables or disables access to the mailbox by using Outlook Anywhere (RPC over HTTP) in Microsoft Outlook.
Valid values for this parameter are:
$true Only Outlook clients that aren't configured to use Outlook Anywhere (RPC over HTTP) are allowed to access the mailbox. By default, Outlook 2013 is configured to use Outlook Anywhere.
$false Outlook clients that are configured to use Outlook Anywhere (RPC over HTTP) are allowed to access the mailbox.
The default value is $false.
Twitter!:
Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Accessing Exchange 2013 Mailboxes from Terminal Server hosted on Server 2003 Std - Cert Issues

We are in the midst of deploying an Exchange 2013 SP1 CU5 environment and have run into some issues. Currently there is a good coexistence between a single Exchange 2007 server and the 5 2013 servers. Mail is flowing through 2013 and then being
relayed to 2007 when necessary.
We have a number of Server 2003 Terminal Servers. On two separate machines, both running the lastest rollups of Outlook 2010, any user with a 2013 mailbox receives a password prompt after launching Outlook. It is trying to connect to one of the
two CAS, fills in the user's account, and will not accept any password. In addition, a window pops up behind stating "There is a problem with the proxy server's security certificate. the name on the security certificate is invalid or does
not match the name of the target site mail.pvschemicals.com. Outlook is unable to connect to the proxy server. (error code 0)." 2007 mailboxes are not affected.
We have checked pretty much everything that we can think of. Virtual Directories are good, certificate is good, etc. The strange thing is that only happens on 2003 TS machines, so I have to think that it's related. Our 2008 TS' are just
find.
We have applied the 2003 SHA2 certificate hotfix.

Hi,
According to your description, the configurations of Outlook Anywhere are proper. And based on my research, the issue can be related to the version of the terminal server 2003. Thus, please check if your terminal 2003 server is 2003 R2 SP2 or later.
For more information, you can refer to the following thread:
http://social.technet.microsoft.com/Forums/exchange/en-US/295bf2bc-584b-4de2-85fb-94096fac52e7/outlook-connectivity-problem-on-2003-term-server-exchange-2013?forum=exchangesvrclients
Thanks,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Angela Shi
TechNet Community Support

How to upgrade Exchange 2013 host OS to Server 2012 R2

Similar Messages

Maybe you are looking for