How to upgrade from trial connect 9 version with elearning features?

Please advise how i upgrade from my current trial version of Connect 9 to the full version with elearning features.
I see that the public pricing is without the elearning features, so for me this is no good as i need to host courses. The email address of [email protected] is invalid and bounces back and the phone line helpers are unable to provide information to help.
I cannot find costings or online download options anywhere
Please help as a matter of urgency
Thanks

Contact me off-forum and I'll get you all the info you need.
Jorma Jennings
jorma[at]realeyesconnect.com
Not sure why the adobe email bounces, but they probably can't get you anything more than a contact for a reseller anyhow.

Similar Messages

  • HT5148 have serial number for fcp x, how do i upgrade from trial?

    Have 6 licenses from Apple
    downloaded and installed trail version
    how do i enter serial numbers?
    Thanks in anticipation

    I do not have vouchers
    i have 6 licenses
    the machines (edit suites) to be installed do not connect to the web
    Do you have any idea how i can enter serial number /  upgrade from Trial?

  • I bought and retend a movie from itunes. The Trailer had Portuguese subtitles. The film rented hasn´t subtitles in Portuguese. How should do for get a version with Portuguese subtitles . Can you help me ?

    I bought and retend a movie from itunes.
    The Trailer had Portuguese subtitles.
    The film rented hasn´t subtitles in Portuguese.
    How should do for get a version with Portuguese subtitles ?

    If the film's description page in the store says that it has Portuguese subtitles then they should show as an option when playing it : iTunes: Language settings for video - Apple Support
    If it doesn't show an option then the film might have been mis-labelled in the store, in which case try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
    If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • How to upgrade from version 3.2 to version 4

    Current using SQL Developer version 3.2.09.
    OS: SUSE Linux 11
    How to upgrade from version 3.2 to version 4?
    Thanks
    Scott

    Current using SQL Developer version 3.2.09.
    OS: SUSE Linux 11
    How to upgrade from version 3.2 to version 4?
    The documentation is your friend.
    All of that is explained fully in the Oracle documentation.
    Oracle makes their documentation available for FREE download. The Sql Developer Installation Guide covers nothing BUT how to install and upgrade the product.
    https://docs.oracle.com/cd/E39885_01/doc.40/e38928.pdf
    The user guide is also available
    https://docs.oracle.com/cd/E39885_01/appdev.40/e38414.pdf

  • Upgrading from Trial version to Developer Edition

    We installed SQL server 2014 trial edition in 2014 and the trial period just expired. No longer access SQL server 2014. Also in 2014 I purchased the SQL server 2014 Developer Edition.
    I go in the maintenance section of SQL server 2014 and try to upgrade by entering my product key and get an error message that my product key is not valid. I called Microsoft and two different employees confirmed my product key is good.
    Should I be able to upgrade from Trial version to Developer Edition by simply entering my product key?
    Thank you

    Hi cguay01,
    As other post, you should be able to upgrade from Trial Edition to Developer Edition by entering product key from SQL Server setup wizard, you can follow the steps in this similar
    blog. You can also use the following command lines to upgrade SQL Server 2014 Trial to a full version.
    Setup.exe /q /ACTION=editionupgrade /INSTANCENAME=<MSSQLSERVER or instancename> /PID=<PID key for new edition>" /IACCEPTSQLSERVERLICENSETERMS
    According to your description, the issue that “product key is not valid” might be caused by several reasons such as corrupted installation file, antivirus scanning and so on. There are some proposals for you troubleshooting this issue.
    1. Please ensure that your SQL Server installation file is not corrupted. If you are using ISO download, please copy the content of the ISO image to the local disk on your computer and upgrade SQL Server from there.
    2. Make sure you use corresponding license key matched the edition and version of SQL Server.
    3. Make sure that you don’t exceed the limit of allowed activations of the product key.
    4. Turn off any Anti-virus software when upgrading SQL Server.
    There is also a similar thread for your reference.
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/bdd94577-515c-49fa-be44-008eacece057/installing-sql-server-2012-on-a-new-vm-error-code-0x858c0017?forum=sqlsetupandupgrade
    Thanks,
    Lydia Zhang
    Lydia Zhang
    TechNet Community Support

  • I just bought ilife11 from a friend and tried to install it but it says I need to have 10.6 or later.&#160; I have 10.5.4.&#160; Can I upgrade to the latest version with a "download" ?

    i just bought ilife11 from a friend and tried to install it but it says I need to have 10.6 or later.  I have 10.5.8.  Can I upgrade to the latest version with a "download" ?

    entatty5 wrote:
    ... snow leopard, which I don't have.  Do I have to go program upgrade  by upgrade? I can't just go from 10.5.8 to the latest?  Thanks for the help.
    You need Snow Leopard before you can go to Lion...
    Check that your Mac meets the System Requirements...
    Snow Leopard Specs:
    http://support.apple.com/kb/SP575
    Lion Specs:
    http://www.apple.com/macosx/specs.html

  • Does anyone know how to upgrade from 4.1 to 4.3 ios?

    After being tricked by the fast talking smoothy helper at Apple store in London to buy a micky mouse ipodtouch (fourth generation) two years ago I am stuck at ios 4.1 and find that all the useful applications need 4.3 or more. So I went to the trouble of letting the macbook stay open all night to load yet another micky mouse version of itunes so that I can upload the more recent version of ios and now (since I don't want to continually have a lot of rubbish on the ipod I disabled the automatic sync "feature") I can only go round in circles  whereby the only real possibility left is to turn on the autosync feature. I have had messages like "your ipod will be completely erased if you proceed" and "do you wish to fiddle another few days with this nasty system, then click on continue" and so on.
    Does anyone know how to upgrade from 4.1 to 4.3 ios?
    That would be great (maybe) because otherwise I will toss this children's waste product on the floor and set up my HD camera to show how easy it is to smash the brightly lit screen into pieces and relieve myself of trash which Apple sell to unsuspecting gullible humans who believe that they are not being tricked by such a nice company who produce shiny colourful gadgets which only work for a month or two before becoming 100% obsolete.
    Great to hear from those who have wasted many months of their lives and discovered how to trick the system into doing a simple update operation!
    I am insulted by the tricks that fool many and that apple pretend are "necessary".
    Germany 2014 01 11 16 19 27

    Illaass, your help is amazing - miles better than anyone working in this part of the world who is paid - and you do this for free - because, like me, you LOVE to help people!
    BUT, as I said above -
    1. There is nothing "mobile" under Application Support. For whatever reason.
    2. Devious - that Apple has set up iPod to not show in Finder - a red herring and sign that corruption is visible.
    I will try iFunBox next and it sounds like they provide this for the more serious users but use a trivial name to excuse further strangeness.
    After
    There are purchased items on the iPod that have not been transferred to your iTunes library. You should transfer these items to your iTunes library before updating the iPod. Are you sure you want to continue?
    I get
    Updating to iOS 6.1.5 will backup and restore the apps, media, contacts, notes, and settings on your iPod touch.
    Please do not interrupt the update, which may take an hour or longer to complete.
    Cancel          Update
    And then I wait for hours to arrive at the above mentioned
    Backing up iPod   \\\\\\\\\\\\\\\\\\\\\\\\\ Stop
    and then as above
    An error occurred while backing up this iPod (0xE8000084). Would you like to continue to update this iPod?
    Continuing will result in the loss of all contents on this iPod.
    Cancel                Continue
    and so we are back to where we always land - the user is left in the Apple designed sabotage situation which annoyed me so much initially.
    "Most users will give up at this point, loose all the data or buy yet another disposable from Apple. Less than 3% will work their way to this site and 90% of the 3% will leave the iPod to gather dust in the hope that someone will help later. In all, Apple gains, since people blame themselves for "mistakes" which Apple programmed to throw out users who do not take the 100% Apple path. But Illaass and myself still play the game of "trying to fix" something which Apple don't allow."  was the comment which I was going to write but decided against it, adding no value to the conversation other than explaining one reality which we all hoped could be wrong but which I thought to have a very high chance of being closer to the truth.
    Apologies for my doubts towards the integrity of the creators.
    2014 01 13 12 11 58 17
    Recheck: Under Application Support "mobilesync" folder has appeared (MobileMeSyncClient has also appeared [while again trying to update iPod] with zero size) - Good news, a Backup file is there, but it is only 3GB while my iPod has 32GB and is close to full (800MB free space).
    Latest at
    2014 01 13 12 09 22
    The iPod could not be restored. An unknown error occurred (9).
    More Infomation    OK
    So it looks like I may have lost all the important pictures documenting various items all around Europe for the last two years - luckily I moved a year ago from the iPod toy camera to a Panasonic real camera with SD card which can be read on any computer. Hence important items lost may only be older than one year rather than the most recent items.
    Glad I have changed to Panasonic since they don't try to screw you when you don't use their system.
    I will now check the "more information" rather than just click on "OK" since I am of the 3% who "don't accept cr*p".
    For full information I quote that the iPod now shows a screen with a USB ikon, an upward arrow and an iTunes ikon (all micky mouse language which reduces transparant, clear and technical discussion and thus covers the trail of "where things went wrong").
    The iPod is still attached to the computer but the above MMTALK may mean that the iPod should be attached via USB to the mac. I record much of this activity on Video to be able to later prove EXACTLY what occurred, rather than having to rely on screenshots and opinions. We are after all dealing with important items which may later be required to be shown in court, as evidence against fraudsters.
    The "More Information" link leads to
    Resolve iOS update and restore errors in iTunes
    which I have already seen before.
    I clicked on OK and a help screen (unnamed as ever because no one like myself demanded that the help screens be named for later discussion) arrived:
    You can help Apple improve its products a
    while copying this into this message the computer began to start up Final Cut Pro and this was cancelled, then iTunes came up with a message:
    iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes.
    ok
    And I presume the earlier message about helping Apple is gone because I keep getting interrupted by this message called
    iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes.
    ok
    it has appeared now at least six times interferring with anything else I do. Each time I try to write, this message appears and blocks, but only when I write. I tried to do a carriage return and the message appeared taking the carriage return as acceptance of the OK in the
    iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes.
    ok
    Message. But since I have not removed the USB and keep returning to this message I am able to write for a few seconds (now 30 seconds or more) and the message remains on the screen but not blocking this conversation. It appears to be random but in fact as you can later see from the video, it is not reappearing each periodic number of seconds but as I reach a new comment.
    I will try to close iTunes so that this can be stopped (I clicked on OK and it appeared another few times, each time I clicked on ok and now it has left me in peace to write here although iTunes is still not yet closed).
    Difficult to log down all the strange behaviour but I think you can get the gist of what is going on.
    2014 01 12 12 49 27
    Should I remove the iPod and stop iTunes? I have a nasty feeling turning to indifference since I have video footage which will verify all the above in a court of law if later required. The truth must always win over any devious attempts at forcing people to do things they don't want to ;-)
    2014 01 13 13 03 48

  • How to upgrade from 10.1.5 to 10.2?

    Can anyone out there let me know how to upgrade from 10.1.5 to 10.2? I'm trying to use my new digital camera and I need a minimum of 10.2.
    Please email me with the answer.
    Thanks!

    Hi, Jen. An OS upgrade to any version higher than 10.1.5 will have to be purchased. After buying OS 10.2.x (Jaguar), 10.3.x (Panther), or 10.4.x (Tiger), you will then be able to apply free downloadable updaters to get you to 10.2.8, 10.3.9, or the current 10.4.5 — whatever is the end-stage evolution of the cat you bought.
    For universal installers of Jaguar and Panther, which Apple no longer sells, try http://www.hardcoremac.com or http://www.apple-rescue.com. Tiger is available everywhere.

  • Need information on how to upgrade from 10.5.8 to make computer compatable to iphone upgrade of 11.5.1

    hi everyone:  I require some information on how to upgrade from 10.5.8 to make my mackbook pro compatable
    with the iphone upgrade. Please note that I have gone thru the upgrades on this computer and it tells me there are
    no new ones available...... I need to get my upgrade past the 11.5.1 level.....so do I need to purchase a new
    upgrade program....and if so which one...as I have been thru the apple store and so far as i can tell
    the ones that are listed such as maverik, lion and snow lepard are not high enough. 
    To anyone who replies, thankyou so much for taking the time to help me.  It is truely appreciated.

    11.1.5 is likely to be the version of iTunes you are being asked to run, not the version of Mac OS X.
    To get a higher version of iTunes, you likely have to upgrade Mac OS X. All Roads lead through the 10.6 Upgrade, available as a physical DVD only, from the Apple Online store for about US$20:
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    This is one of the most benign Upgrades Apple has ever issued. The size of the Operating System gets smaller, performance is slightly faster, and very few Applications are left behind. If you have some older PowerPC Applications, you may need to ask to install the Optional Rosetta emulator for PowerPC code when you install.
    Once your 10.6 install is fully Updated to 10.6.8 using Software Update, the Mac App Store will appear, and future upgrades (if needed) will be handled through variations of online purchases.

  • HOW TO UPGRADE FROM Release 10.2.0.1 TO 10.2.0.2

    Hi,
    HOW TO UPGRADE FROM Release 10.2.0.1 on Linux TO 10.2.0.2 ? Should we apply a patch ?
    Thank you.

    thank you. Of cours, I looked at metalink site for
    RDBMS patch familly, but I did not find any for
    upgrading from 10.2.0.1 TO 10.2.0.2
    Regards.
    Message was edited by:
    user522961What's your target OS ?
    Why are you specifically want this version?
    As you can see from Oracle download page, some OS come with 10.2.0.2 directly.
    http://www.oracle.com/technology/software/products/database/index.html
    Oracle Database 10g Release 2 (10.2.0.3) for Microsoft Windows Vista
    Oracle Database 10g Release 2 (10.2.0.1.0) for Microsoft Windows
    Oracle Database 10g Release 2 (10.2.0.1.0) for Microsoft Windows (x64)
    Oracle Database 10g Release 2 (10.2.0.1.0) for Microsoft Windows (64-bit Itanium)
    Oracle Database 10g Release 2 (10.2.0.1.0) for Linux x86
    Oracle Database 10g Release 2 (10.2.0.1.0) for Linux x86-64
    Oracle Database 10g Release 2 (10.2.0.1.0) for Linux Itanium
    Oracle Database 10g Release 2 (10.2.0.1.0) for Linux on Power
    Oracle Database 10g Release 2 (10.2.0.1.0) for AIX5L
    Oracle Database 10g Release 2 (10.2.0.1.0) for HP-UX PA-RISC
    Oracle Database 10g Release 2 (10.2.0.1.0) for HP-UX Itanium
    Oracle Database 10g Release 2 (10.2.0.2) for HP Tru64 UNIX
    Oracle Database 10g Release 2 (10.2.0.2) for HP OpenVMS Alpha
    Oracle Database 10g Release 2 (10.2.0.2) for OpenVMS Itanium
    Oracle Database 10g Release 2 (10.2.0.2) for Solaris Operating System (x86)
    Oracle Database 10g Release 2 (10.2.0.1.0) for Solaris Operating System (x86-64)
    Oracle Database 10g Release 2 (10.2.0.1.0) for Solaris Operating System (SPARC) (64-bit)
    Oracle Database 10g Release 2 (10.2.0.2) for z/Linux
    Oracle Database 10g Release 2 (10.2.0.2) for z/OS (OS/390)

  • HT1338 how to upgrade from mac os x 10.4.11 to 10.5

    how to upgrade from mac os x 10.4.11 to 10.5

    As Niel relaters...
    Leopard requirements/10.5.x...
        *  Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
    minimum system requirements
        * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
        * DVD drive for installation
        * 9GB of available disk space (I say 30GB at least)
    Trouble is Apple no longer sells it, check eBay & such for the Retail version, not the Gray Discs...
    http://www.ebay.com/sch/i.html?_nkw=mac+os+x+leopard+retail+10.5
    Snow Leopard/10.6.x Requirements...
    General requirements
       * Mac computer with an Intel processor
        * 1GB of memory (I say 4GB at least)
        * 5GB of available disk space (I say 30GB at least)
        * DVD drive for installation
        * Some features require a compatible Internet service provider; fees may apply.
        * Some features require Apple’s MobileMe service; fees and terms apply.
    Which apps work with Mac OS X 10.6?...
    http://snowleopard.wikidot.com/
    It looks like they might still have it...
    http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
    It's reported that if you have a MobileMe account that Apple will send you SL/10.6 for free.
    If it's a core Duo & not a Core2Duo, then it'll only run in 32 bit mode.

  • How to upgrade from OS 10.5.8 Leopard to OS 10.6.4 Snow Leopard?

    How to upgrade from OS 10.5.8 Leopard to OS 10.6.4 Snow Leopard?

    First the newest version of snow leopard is the version 10.6.7
    1. What you want to do is check you computer specs to see if it can run snow leopard
         the current specs needed are
    General requirements
    Mac computer with an Intel processor
    1GB of memory
    5GB of available disk space
    DVD drive for installation
    Some features require a compatible Internet service provider; fees may apply.
    Some features require Apple’s MobileMeservice; fees and terms apply.
    2. I would advise you to back up your computers data if you are not currently doing so.
    3. Purchase a legal copy of snow leopard from Apple or other certified apple retailers such as best buy and amazon.
    4. Insert disk and follow the instructions to install snow leopard on exsiting drive running leopard.
    5. When installing snow leopard SHOULD NOT touch your user files such as music or pictures, it should only change the core OS
    6. After the snon leopard installation, go to the Apple Menu located on the top left and select software update here you can install the latest verison of the Apple OS

  • After "upgrading" from trial to FCPX 10.0.3 multi cam does not work

    After "upgrading" from trial to FCPX 10.0.3, multi cam does not work anymore. Everything was fine in the trial version, but now the multicam clip I made in trail is shown, but not with the 4 windows, only the first angle can be seen. And I can not find (import) the cuts I made in the trail. The settings are the same in both versions. Am I missing something? Is it possible that I have to start from scratch and all work is lost?
    When I double click the multi cam clip I see all four angles in the timeline, one underneath the other... 
    Any help is appreciated! Thanks!

    There is an excellent podcast tutorial series called "Creative COW Final Cut Help Tutorials Podcast (SD)"
    in the iTunes Store.
    The latest three are video podcasts and go into great depth concerning the new Multicam in 10.0.3
    Can't recommend them enough.

  • How to upgrade from os x 10.6.8 to Lion os 10.7.2

    How to upgrade from os x 10.6.8 to Lion os 10.7.2?

    Open the Mac App Store and try downloading Yosemite. If you get told it's incompatible, choose About this Mac from the Apple menu, check if the computer has at least a Xeon or Core 2 Duo(not Core Duo) CPU and 2GB of RAM, and if it does, click here and order a download code for Lion 10.7.
    Back up your data and check your applications for compatibility before upgrading. In particular, Mac OS X 10.7 and newer don't support PowerPC programs such as versions of Microsoft Office prior to 2008.
    Unless you previously got an installer for Mac OS X 10.7 through 10.7.2, you can only upgrade to a newer version.
    (124247)

  • How  to Upgrade from SAP NetWeaver 7.01 to NW 7.02?

    Hi Experts,
      I am working on GRC upgrade project,we need upgrade to GRC10.0 from GRC3.0.
    GRC 10.0 only work on NW7.02,we now have NW7.01. 
      How  to Upgrade from SAP NetWeaver 7.01 to NW 7.02?
    Use EHPI tools or just spam/saint  or any other way ?
    current version:
    SAP_ABA 701 0006 SAPKA70106
    SAP_BASIS  701 0006 SAPKB70106
    PI_BASIS 701 0006 SAPK-70106INPIBASIS
    SAP_01 0006 BW SAPKW70106
    Thanks!

    HI,
    Net wevaer 7.2 CE is totally different from Net weaver 7.01.
    No relation i feel.kindly check the links.
    http://help.sap.com/saphelp_nwce72/helpdata/en/44/d958673ef05f4de10000000a11466f/frameset.htm
    http://help.sap.com/content/documentation/netweaver/index.htm
                      OR
    You do not need Netweaver 7.2 CE for using NWBC 3.0. You just need netweaver 7.02.
    You simply need to apply enhancement package 2 on your existing 7.01 system to make it 7.02.
    Please refer to installation guides on service marketplace, there you can see the EHP2 installation guides.
    Also, see SAP Note 900000 - Netweaver Business Client - FAQ. This will give you all the details required.
    *Regards,
    Ajitabh

Maybe you are looking for