How to upgrade from windows 8.1 --32 bit media to 64 bit media

Dear Sir,
Plz provide a link to upgrade OS fro windows 8.1--32 bit media to 64bit media....in my laptop --64 bit
Reason: since my touchpad is not working at all
Thanks & Regards
M.Hanumantha rao
7774034953

Deart Sir,
Please provide a solution to convert my WIndows OS 8.1-- 32 bit to Windows 8.1 --64 Bit
Because my laptop is 64 bit.but i purchased and Installed windows 8.1--32 bit.
the problem is "Mouse touchpad is not Working at all".because Dell frivers is not supportable for Windows 8.1 --32 bit
but for only windows 7-32bit ,Windows 7--64 bit and Windows 8.1--64 bit
So kindly let me know the process of "How to convert Windows 8.1 --32 bit to windows 8.1--64bit"
Thanks & Regards
M.Hanumantha rao
07774034953 / 09491895917
[email protected]
India

Similar Messages

How To: Upgrading from Windows XP to Windows 7 pro

I upgrades from windows 7 home to windows 7 pro.
I could not use the anytime upgrade option, so I did a full install
I had a problem that I notice is common for many people, I came up missing drivers for my lan and wifi cards among others, I followed the advice given to others, and found chipset drivers and a few others, however, I had loaded some drivers already, so I am coming up missing the ntwork controler and the usb 2.0 crw. I am also missing the drivers for the camera, and special functions on the key board. I believe that the first step I need to take is to throw away some drivers and reinstall the chiipset drivers and others I have read recommended. However, I don't know what to throw out.

Satellite C55-A5245 Specifications
Satellite C55-A5245 Support Page
Blaine
If you ask for help here, it's generally best to respond in less than a week to someone who's offered to help you. But, let's assume you were very tied up or away.
Regardless, your model's specifications clearly show that your system originally came with Windows 7 Home Premium, and that it came out in 2013. So, it's difficult to understand why you are upgrading from Windows XP to Windows 7. Oh, wait, I see your thread title says from Windows XP to Windows 7 pro, but in the text of your original post it says from Win7 Home to Win7 Pro. Again, this is a little confusing.
Regardless, as it's safe to assume you have already wiped out your Toshiba Recovery Partition in doing a clean install of Win 7 Pro. So, let's just try this. Download this Toshiba utility, double click to begin installation.
Toshiba Software Installer for Windows 7
Please let us know what happens. Good luck.
Mike

How to Upgrade from Windows Vista to Windows 7 on an iMac

I have Windows Vista already installed on my iMac. I would now like to upgrade to Windows 7. I wish to know how do I go about it. Can I upgrade to Windows 7 from within Windows Vista or do I need to go through Bootcamp like you do when you first install Windows on an iMac. I currently have the latest version of iOS installed on my iMac. Thank you for your help.

Dear Mike,
If i want using MAC OS X version 10.6.8, what version should i use preferably parallels, is it free ?
Coz, my parallel and the windows xp suddenly is gone, i don't know why..Can you help me..
Thank you Mike.
Best Regards,
Doni.

How to upgrade from Windows 8.1 OEM to Windows 8.1 Enterprise

Kindly advice
windows 8.1 oem upgrade to enterprise

SG
To enable us to help you better, you need to provide as many details as you can about the problem you are experiencing.
If you design your question effectively, you can get good information from people who are knowledgeable about the topic and who are happy to help you.
Prepare your question. Think it through. Hasty-sounding questions get hasty answers, or none at all.
What troubleshooting have you done so far?
Asking an effective question will get you help faster read how here
Suggestions for asking for help on a site.
http://www.catb.org/~esr/faqs/smart-questions.html
Wanikiya and Dyami--Team Zigzag

How to upgrade from windows 8.1 to windows 8.1 Pro

Just bought a Tosihba satillite s55-b5268 and have been trying to do a system upgrade, but have been un sucessful. My windows DVD is recognized and loads up but after it goes thru all the steps and finishes I still have windows 8.1 on my system. Any suggestions on how to get around this problem would be greatly appreciated

The ISO file (i.e., the DVD) for Windows 8.1 and for Windows 8.1 Pro are identical. Only the product key is different
The important part is this. If you do a clean install of Windows, you will need to struggle with the dozens of drivers and utilities that make your laptop work as designed. And the order of installation is problematic.
Your best bet is to restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. Then upgrade to Pro as I have described using the new key you bought. It takes only minutes.
If you failed to create recovery media, obtain it from Toshiba. Scroll down to Get Recovery Media here
See the instructions in the section Restoring from recovery media, which begins on p. 50 of the User's Guide.
Satellite/Satellite Pro L40/L50/L70/S40/S50/S70-B Series User’s Guide
-Jerry

SAP Server upgrade from Windows 2003 and 2008 R2 with Oracle Database

Hi,
We need to upgrade upgrade our Windows servers that are running our SAP systems from Windows Server 2003 to Windows Server 2008 R2. We are using Microsoft Clustering for HA so an inplace upgrade seems not possible.
Someone has suggested to us that we will need to export our database and reimport it to achieve this upgrade however but I cannot understand why this would be necessary (we are not changing the underlying filesystem!).
Could someone please confirm whether a database export and import is required for this OS upgrade scenario? I have done a bit of research but nothing has jumped out and now I need an answer to this quickly.
We are running
- ERP 6.0 NW 7.01 (soon to be 7.02 with ABAP stack only)
- XI(PI) Java & ABAP
- SRM (Java & ABAP)
- Portal (Java only)
- PLM (Java & ABAP)
- BW (BI 7.0) (Java and ABAP)
Thank You
Felicity

Hello,
You need to go for 'Homogeneous System Copy' to achieve this, but since almost all the systems in your landscape include the Java Stack as well - so the system copy with Export/Import is to be carried out.
Even if you are not going for file system change, but it is a Windows environment and you can't put SAP up on the target Windows (windows 2008 R2) just by copying the contents and file system from source to target. You need SAPinst to create the registry and all. - On top of that you have Java stacks involved, so for java stack you can't carry out just backup/restore method to put SAP up there on target - so you need Export/import because for java stack some OS level dump is to be collected during system copy from source and it needs to be imported on target OS.
Are you clear on this one ?
Read system copy guide once and Search in OSS for the Notes to check how to upgrade from Windows 2003 to Windows 2008 R2.
Thanks

How to upgrade from Vista to Windows 7?

I recently bought the upgrade version of Windows 7 utimate for my laptop, my laptop is new and Windows Vista pre-installed. I would like to know if I upgrade Windows 7 from this "Fresh", pre-installed vista, would this Windows 7 operate as good as the clean installed Windows 7?
I am not very clear how Vista upgrades to Windows 7, do Windows 7 upgrades based on the old Vista system? Or it will install a clean and new Windows 7 then only copy all the settings and programmes from old Vista?

Hi
Can you please tell us what Toshiba notebook you have exactly and what Vista version you have exactly (Home, Business, etc. and 32bit/64bit)?
Theoretically you can upgrade from Vista to Windows 7 but it must be same version. That means its only possible to upgrade from 32bit to 32bit and 64bit to 64bit.
If you want to upgrade you have to insert this disc and follow the screen instructions, thats all.

How do I restore a Windows 8.1 system image if I upgraded from Windows 8?

I have a new HP Envy TouchSmart 15 Notebook PC 15-j003cl.
It came with Windows 8 which I upgraded to Windows 8.1.
I created the HP Recovery USB flash drive.
From my reading I understand that the recovery USB flash drive is Windows 8 not 8.1.
My question is:
Can I restore a Windows 8.1 System Image Backup I made on a USB hard drive using the Windows 8 recovery USB flash drive?
Or, to put it another way, what is the recommended procedure to back up an upgraded Windows 8.1 computer so, in the event of hard-drive failure, I don't have to start with Windows 8, upgraded to 8.1, re-install all my apps?
Thanks
Kirk

OK here's where I am now and a few followup questions,
Started with Windows 8.
Upgraded from Windows Store to Windows 8.1
Installed lots of apps and got everything running the way I like.
I created a full system image of my upgraded 8.1 hard drive to an external USB hard drive.
I have successfully created a recovery boot USB flash. (did not copy recovery partition) I can restart the computer from
it and navigate up to the point where it will restore my system image made after I upgraded to 8.1. (I don't want to risk
trying it for fear it will mess up my computer)
Assume my hard drive failed and I have a new blank hard drive:
My question is at this point does it matter that this was originally a windows 8 (not 8.1) computer?
Will I be able to restore the image of 8.1?
Does it matter which version of Windows I created the recovery boot USB flash on? ( I can't tell when it boots from the
recovery USB flash if it is running Windows 8 or Windows 8.1.
I wish there was a way to test this without risking losing all the work I have done to configure the computer??
Thanks,
Kirk

AMD redeon HD 7400 graphic not working after upgrading from windows 7 to windows 8 Pro

Hello,
I have hp Pavilion G6 1117tx model. i have upgrade from windows 7 to windows 8 Pro. after upgrading i have observed that on righ click option i have not fine CCC and Configure switachable graphic option is missing. so please help me how i can solve proble relationg to AMD redeon hd 7400 grphic card and intel hd 3000 series grphic switchable option.
Please help........
Mounal Patel
This question was solved.
View Solution.

Hi,
Download and install the switchable graphics driver on the following link.
http://ftp.hp.com/pub/softpaq/sp59001-59500/sp59147.exe
When the installation has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Unable to upgrade from Windows 8.1 SL to Windows 8.1 Pro

I just bought a brand new Lenovo G510 notebook and I am battling to upgrade from Windows 8.1 SL x64 to 8.1 Pro x64.
I used the process:
Right click This PC -> Properties -> Get more features with a new edition of Windows -> I already have a product key
Then, type the key you bought...BUT the code is not accepted and I really do not wish to do a fresh install of Windows.
Any ideas on how I can get this done quickly without a fresh install.
Thank You.

Hi,
How’s everything going?
If you could update us at your convenience that would be wonderful.
Yolanda Zhu
TechNet Community Support

Upgrade from Windows 7 pro to windows 8.1 pro I only get keep personal files only or nothing, I want to keep apps too

when trying to upgrade from windows 7 SP1 to 8.1 pro from the DVD while being in windows I only get an option to keep personal files only or keep nothing.
what do I have to do so I can do a upgrade and keep all the programs too ?
thanks!
Brandon Dillon

I think there might be a way that when you install win 8.1 on a system with existing windows it will copy the user profile to a spare partition and then format the C and the then install windows 8
If you do a rebuild on a Win 7 or Win 8 PC from a recovery partition, the software as standard now on the rebuild gives you the options of keeping your Data, even though it will wipe and reinstall everything as per factory settings.
So this is normal and to be expected.
To be honest I wouldn't even do this... I'd backup everything, install Win 8.1 from complete scratch, not keeping any data and then restore data as I needed it. I am apprehensive about it thinking it knows where all my data might be.... especially with how
some programs like to store stuff.
Of course this means everything to install again, but latest versions always good, a clean install

Upgrading from Windows 7 32 bit to Windows 8.1 64 bit

I have Windows 7 32 bit. Recognizing I can't upgrade to 64 bit and over write the 32 bit system my question
I have multiple SSD. My existing winn7 occupies C:\
Can I install the new windows 8.1 64 bit on a separate drive and then rename it to the C:\ drive
or
Should I disable the existing win 7 root drive. Go through the boot process of starting Win8.1 in the CD, having it designate C:\ etc and continue the install. Then re-connect (if I need too) the other SSD for the data files
Or, should I shut up and let you advise me the best way to convert to Windows 8.1 64 bit with an existing Windows 7 32 bit :)
========
While I'm begging for help what is the best method to copy/save Gmail email folders and files as a flash or cd file prior to the system change
thanks

Hi,
Agreed with the suggestions mentioned by Arnav Sharma.
If you want to do an upgrade from Windows 7 to Windows 8.1, please refer to the below article:
Upgrade to Windows 8.1 from Windows 7
And if you would like to configure dual boot OS, please take a look at the below articles:
Install more than one operating system (multiboot)
How to do a dual boot installation with Windows 8 and Windows 7 or Vista
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best regards
Michael Shao
TechNet Community Support

HOW TO UPGRADE FROM Release 10.2.0.1 TO 10.2.0.2

Hi,
HOW TO UPGRADE FROM Release 10.2.0.1 on Linux TO 10.2.0.2 ? Should we apply a patch ?
Thank you.

thank you. Of cours, I looked at metalink site for
RDBMS patch familly, but I did not find any for
upgrading from 10.2.0.1 TO 10.2.0.2
Regards.
Message was edited by:
user522961What's your target OS ?
Why are you specifically want this version?
As you can see from Oracle download page, some OS come with 10.2.0.2 directly.
http://www.oracle.com/technology/software/products/database/index.html
Oracle Database 10g Release 2 (10.2.0.3) for Microsoft Windows Vista
Oracle Database 10g Release 2 (10.2.0.1.0) for Microsoft Windows
Oracle Database 10g Release 2 (10.2.0.1.0) for Microsoft Windows (x64)
Oracle Database 10g Release 2 (10.2.0.1.0) for Microsoft Windows (64-bit Itanium)
Oracle Database 10g Release 2 (10.2.0.1.0) for Linux x86
Oracle Database 10g Release 2 (10.2.0.1.0) for Linux x86-64
Oracle Database 10g Release 2 (10.2.0.1.0) for Linux Itanium
Oracle Database 10g Release 2 (10.2.0.1.0) for Linux on Power
Oracle Database 10g Release 2 (10.2.0.1.0) for AIX5L
Oracle Database 10g Release 2 (10.2.0.1.0) for HP-UX PA-RISC
Oracle Database 10g Release 2 (10.2.0.1.0) for HP-UX Itanium
Oracle Database 10g Release 2 (10.2.0.2) for HP Tru64 UNIX
Oracle Database 10g Release 2 (10.2.0.2) for HP OpenVMS Alpha
Oracle Database 10g Release 2 (10.2.0.2) for OpenVMS Itanium
Oracle Database 10g Release 2 (10.2.0.2) for Solaris Operating System (x86)
Oracle Database 10g Release 2 (10.2.0.1.0) for Solaris Operating System (x86-64)
Oracle Database 10g Release 2 (10.2.0.1.0) for Solaris Operating System (SPARC) (64-bit)
Oracle Database 10g Release 2 (10.2.0.2) for z/Linux
Oracle Database 10g Release 2 (10.2.0.2) for z/OS (OS/390)

Reinstalling Elements 11 after upgrading from Windows XP to Windows 7?

Any idea how I can reinstall Elements 11 (Premier and Photoshop) after upgrading from Windows XP to Windows 7?

Download from
Download Photoshop Elements products | 13, 12, 11, 10
Download Premiere Elements products | 13, 12, 11, 10
Install then enter your serial number.

How To Upgrade to Windows 8 - Useful Informations

Hi community
I would like to share very interesting Toshiba page providing the info and details about the new Win 8 upgrade.
*How To Upgrade to Windows 8*
http://eu.computers.toshiba-europe.com/innovation/generic/windows8-upgrade-stepbystep/
Dear Customer,
Microsoft offers to upgrade Windows 7 computers to Windows 8 Pro. The information in this document explains the requirements and how to make use of the Windows 8 upgrade offer.
The upgrade process consists of the 5 following parts:
1. Check if your computer is eligible for upgrade by Microsoft and supported by TOSHIBA.
2. Things to do before upgrading to Windows 8.
3. Order Windows 8 from Microsoft and install it.
4. Download the TOSHIBA Upgrade Assistant.
5. Upgrade software components using the TOSHIBA Upgrade Assistant.
_*Part I: Checking the Eligibility Requirements and List of Supported Models*_
1. This offer is available if you have purchased a PC preloaded with genuine Windows 7 Home Basic, Home Premium, Professional or Ultimate between June 2, 2012 and January 31, 2013.
2. Check from the list of supported models, if your computer model is supported for upgrade by TOSHIBA. Visit https://eu.computers.toshiba-europe.com/innovation/generic/windows8-matrix
_*Part II: Things To Do Before Upgrading to Windows 8*_
1. Update your current version of Windows 7 to the latest version supplied by Microsoft at: http://www.update.microsoft.com.
2. Backup all your files and settings before upgrading. Note: Do not back up files to the same hard disk that Windows is installed on. For example, do not back up files to a recovery partition. You can back up to another drive or DVD.
3. Use the Recovery Media Creator utility to create Recovery media (DVD or USB Flash Memory) which will allow you to restore the factory pre-installed software.
4. If Toshiba Disc Creator is installed on your computer, remove it.
a) Click Start ? Control Panel ? Control Panel ? Uninstall program.
b) Select Toshiba Disc Creator and click the Uninstall/change button.

_*Part III: Ordering Windows 8 from Microsoft and installing it*_
1. Register for the Windows 8 upgrade through the Windows Upgrade Offer website managed by Microsoft https://windowsupgradeoffer.com and follow the online instructions. Submissions must be completed online by February 28, 2013.
2. After registration, you will receive a confirmation that will provide more information as to when the Windows 8 upgrade is available for purchase.
3. After the general availability of Windows 8, you will receive the promotion code and purchase instructions.
4. Use the Recovery Media Creator utility to create Recovery media (DVD or USB Flash Memory) which will allow you to restore the factory pre-installed software.
5. Purchase the upgrade as instructed and download Windows 8. You will also be guided to perform a self-qualifying test via an upgrade step-by-step tool with information on the PC before the upgrade.
6. Follow the online instructions to upgrade the operating system. During this process, select Keep Windows settings, personal files, and apps.
Caution: Operate your computer from the AC power supply. Otherwise, you may run out of battery power during the upgrade process.
_*Part IV: Download the TOSHIBA Upgrade Assistant*_
1. To receive the TOSHIBA Upgrade Assistant and necessary software updates (e.g. BIOS, drivers, utilities, applications) from TOSHIBA, please visit
https://eu.computers.toshiba-europe.com/innovation/windows8_drivers.jsp
2. Follow the online instructions.

How to upgrade from windows 8.1 --32 bit media to 64 bit media

Similar Messages

Maybe you are looking for