How to upgrade MacAir (late 2008) to OS X 10.6.8 without a dvd drive?

How can I upgrade my MacAir (late 2008) OS X 10.5.8 to OS X 10.6.8 since I don't have a dvd drive?

If you have another Mac with a DVD/CD drive, you can share that DVD drive over the local network via System Preferences -> Sharing -> Share DVD/CD
The shared DVD/CD will then appear in your MacBook Air finder side bar, and you will be able to install your 10.6 DVD.

Similar Messages

How do I install 10.4 onto a computer without a DVD drive?

Can I put the DVD into a different Mac with a DVD drive, grab the software off the disk, transfer it to the mac without a DVD drive and install from there? Thanks,
Chris

I found a way to do it from an iPod, but I dont want to do that. I have an external Firewire HD that I use for our backup drive but I dont want to whipe that.. although, I use that external drive as my boot drive on the older machine, so I guess I can just hook that external HD to our new Mac, pop in the DVD, reboot the new machine and boot off the DVD and then upgrade the older OS on the firewire. What do you think?
DP 2.5 G5 Mac OS X (10.3.8)

How can I download Photoshop elements 12 without a DVD drive?

How can I download Photoshop Elements 12 without a DVD drive? I am using a MAC

Hi Garden ,
You can download the trial verison of Photoshop Elements 12 and activate it with your serial number
Download Link - http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=en
Let me know if you need more info.
Thanks!
Eshant

Upgrading MacBook Late 2008

I’ve had my MacBook 13″ Late 2008 now for three and a half years, and it has been used every day since I bought it, and with every passing day, it’s getting slower and slower. I’ve checked with every forum out there to find methods for speeding it up, but nothing works! I’m therefore convinced my hard drive is failing. I want to get a new one, and better memory than the standard 2Gb while I’m at it, rather than buy a whole new MacBook. Luckily, I have a few pennies saved up and want so splash out to get the creme de la creme of upgrades. Any advice on the latest gadgets? Both for hard drives and memory? Can SSD's be put into the late 2008 laptop? Thanks, C

You are also able to upgrade to Mountain Lion.
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

Upgrade Macbook Late 2008 Unibody Hard Drive SSD or size?

I have a late 2008 macbook aluminum unibody..........it currently only has the standard 160 GB...and I'm at about 152 GB. I need to upgrade (already upgraded from 2GB RAM to 8GB), but now I need the bigger hard drive. My friend is telling me how great a SSD would be, but I can obviously get a much bigger drive if iI do a standard or hybrid. Please let me know if I should spend $$$$$$$ on SSD...or on Hybrid.........or if I should just get a regular HD?
More info: I'm a firefighter, who is a mortgage originator as a side job. I have NO INTEREST in PC's.......but for my Mortgage side job- I need to have a windows based option. at 152/160 GB used; 8 GB RAM - it is 'fast enough'. Any suggestions as to what type of HD I should get for this old boy? THANK YOU FOR YOUR HELP!!!!

Get a regular HDD for your computer. It should be a notebook sized drive, SATA II-3.0 Gb/s, 7200 RPM. A Seagate XT500 Hybrid is a good trade-off of performance and price.

SSD Upgrade to Late 2008 MBP, Plus Windows 8 Install

Hi guys,
I have a 15", late 2008 MBP that was a beast in it's time, but has started to show it's age, especially due to my aging hard drive. I've read great things about performance improvement through installing an SSD, and so I want to perform this upgrade. Also, while I do have my computer backed up through Time Machine, I'd rather just be proactive on replacing my hard drive before it fails on me (which will definitely happen at some point). Here's some more detailed specs for my computer:
CPU: 2.66 GHz Intel Core 2 Duo
RAM: 4 GB of 1067 MHz DDR 3
GPU: NVIDIA GeForce 9600M GT 512 MB
Note about the GPU: This comp has the dual graphics chips, but I've been always using the "high-performance" one, which is what is listed above (the other one is a GeForce 9400M).
OS: Most current version of Mavericks (OSX 10.9.2)
In looking up SSD's, I've found that people that have had laptops with similar specs to mine have had success with the Crucial M500 SSDs.
After I get my drive all figured out, I want to use Boot Camp to install Windows 8 on the SSD. Currently, I do not have any Windows installations on my computer. My computer is not supported for Windows 8 installation through Boot Camp, despite the fact that hardware-wise, it is compatable with Windows 8. However, I have found discussions that are pretty standard on how to get Windows 8 installed on my computer.
-So, my first question is: Was my research good for this given SSD for my computer? It seems like Samsung makes the best SSDs, but I haven't found any evidence that it would be really compatable with my computer.
-My second question: Given that I will have just installed an SSD, will Windows 8 installation be doable? This is probably the most important question for me, because if it's not possible, then I'd rather just buy Windows 7 right off the bat and install that in boot camp instead.
-My third question: If I can get Windows up and running, how does my computer's double graphics chip configuration work in Windows? I'd want to make sure that Windows is using the more powerful of the chips and not the less powerful one.
-My fourth question: My computer has gone from Leopard to Snow Leopard to Mavericks, and I never performed a "clean install" for any of these OS upgrades. If I clone my HD to the SSD, would it be beneficial for me to run a Mavericks clean install, and then pull all my necessary data off my backup drive?
Sorry for the long-winded post, and I know much of it is demonstrated elsewhere. I have found many discussions involving SSD upgrades, and getting Windows 8 on a late 2008 MBP, but I haven't found anything that has shown both being done. Both seem easy to do, but I just don't know if doing both in tandem is going to cause a bunch of problems. Has anyone out there done this, and can anyone offer me any advice on how to make this process any smoother? I really like doing this upgrade now, because if I run into Windows issues, or other issues on the SSD, I could still just boot from my old hard drive and use my computer. Thanks everyone!

beestmode,
I have a Mid 2010 MacBook Pro, and I put a Samsung 840 PRO SSD into mine. Where did you find evidence that this model SSD would not work in your MacBook Pro? (The SSD which you’ve installed has a good reputation, so you should have no reason to regret your choice.)
Windows 8 via Boot Camp will not be possible with your model MacBook Pro. In Boot Camp, you could install up to Windows 7, either 32-bit or 64-bit. A virtualizer such as Parallels Desktop or VirtualBox could allow you to install Windows 8, but virtualizers have their own sets of positives and negatives.
Since I have a 13-inch model with only one GPU, I don’t know how your dual GPUs would be handled on the Windows side.
When I’d installed my SSD, I did a clean installation of Mavericks onto it, keeping Snow Leopard on my old internal disk, and putting it into an external enclosure.

Upgrading my Late 2008 MacBook Pro running 10.5.8 to Yosemite

I just received a Late 2008 Macbook from a friend that he factory reset. I'm currently running 10.5.8 (very sluggishly) and would like to upgrade to Yosemite. I know I need to buy 10.6.8 before I can make the upgrade, but will my current hardware even be able to support the new software? I don't want to buy anything if I'm going to be running software too powerful for my mac.
Product name: Late 2008 Macbook
Processor Speed: 2 GHz Intel Core 2 Duo
Memory: 2 GB 1067 MHz DDR3

It should.
Check that your computer is compatible with Mountain Lion/Mavericks/Yosemite.
To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
iMac (Mid 2007 or newer) model number 7,1 or higher
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
8 GB or more of available space
Check to make sure your applications are compatible. PowerPC applications are no longer supported after 10.6.
Application Compatibility
Applications Compatibility (2)
Do a backup before installing.
The 2 places I’ve seen recommended most to buy reliable RAM are below. I have purchased RAM several times from Other World Computing and have always been very satisfied with the product and service. They have on-line instructions on how to replace the RAM. OWC has also tested RAM above what Apple states is the maximum. I now have 6GB installed on a machine supposedly limited to 4 GB and noticed an improvement (2008 iMac).
Crucial
Other World Computing
One option is to create a new partition (~30- 50 GB), install the new OS, and ‘test drive’ it. If you like/don’t like it it, you can then remove the partition. Do a backup before you do anything. By doing this, if you don’t like it you won’t have to go though the revert process.

How to upgrade Windows Server 2008 Foundation to Windows Server 2008 Standard

I have a Dell server with Windows Server 2008 Foundation installed. I am now on a larger network which has their own servers for authentication and the Windows Server 2008 Foundation will not let join a domain with more than 15 users. I was told that I needed
to upgrade Windows server 2008 foundation to Windows server 2008 Standard and that process can be done "in place" but I can't find how do do it. I called Dell and they said they basically said they didn't know what I was talking about.
How do I do this?

According to the first one you can perform an in-place upgrade.
Introduction to Windows Server 2008 Foundation
http://technet.microsoft.com/en-us/library/dd459191(WS.10).aspx
How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
http://support.microsoft.com/kb/2255099
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]

How to upgrade Domain Controller 2008 to 2012 on New Server

Hi All,
We are planning to upgrade our domain controller and exchange server 2008 to 2012 R2, so can anyone please suggest what step should be taken first. we have new server machine we are planning to install Windows 2012 R2 and create a additional domain controller
of our existing domain 2008 then transfer the FSMO roles to this server to act as a primary. after successful migration we will upgrade our exchange 2008 to 2012. please advice is there any problem to do this way.
Thanks
Agha

I was just curious about the same thing. However, I am running 32bit version of server 2008 and want to move the server 2012 r2. This will be on a machine with new hardware and all. Am just curious though if it is possible to migrate some of the
domain as to not to have to replicate everything?
Directory Services doesn't really care what version of the OS you are using. You cannot do an in-place upgrade from a 32bit box to a 64bit box.
You'll need to make your new R2 server, install AD, move the FSMOs, and demote your 2008 32bit box.
What WOULDN'T you want to replicate? That's not how AD works. It's a multimaster enviroment where ALL DCs have the same information. You can't choose which objects replicate. To do that, you'll need to clean up your AD.
Good luck.
- Chris Ream -
**Remember, if you find a post that is helpful, or is the answer, please mark it appropriately.**

How do connect my late 2008 Macbook to a TV?

I want to connect my late 2008 Macbook aluminum to a tv by HDMI, and i was thinking about getting the "Moshi Mini DP to HDMI Adapter with Audio Support" but it will not support audio for my Mac. Any other way I can connect it to the TV?

If you connect the MacBook using a Mini DisplayPort to HDMI adapter you will probably need to use external speakers or a 3.5mm stereo headphone jack to RCA sound plugs connected to a stereo sound system if your TV doesn't have separate RCA input plugs or a 3.5mm stereo input plug for audio with the HDMI plug. The Mini DisplayPort to HDMI doesn't carry audio unless you have the Mid 2010 model 7,1 and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with the HDMI. But check your TV manual to see if it has audio plugs that work with one of the HDMI ports.
With the Late 2008 model 5,1 Aluminum Unibody there is an adapter that uses the Mini DisplayPort and a USB port to combine video and audio to HDMI. It's only 2 channel stereo not 5.1 Dolby Surround.
http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802 &p_id=5969&seq=1&format=2

How to connect a late 2008 macbook pro to hd tv

I have a late 2008 Macbook Pro and want to connect it to my HD TV what cables do I need ?

looks like if you'll use exactly this adapter you'll get audio over HDMI

[Forum FAQ]How to upgrade Windows Server 2008 R2 with a GUI to Windows Server 2012 Server Core

We found that some customers willing to upgrade Windows Server 2008 R2 GUI to Windows Server 2012 Server Core recently. This article provides detailed steps to perform the upgrade.
Analysis
Upgrading from Windows Server 2008 R2 with a GUI installation to Windows Server 2012 with Server Core directly
is not supported. If you do that, you will receive the error message below(Figure 1) in Compatibility report:
Figure 1.
In these scenario, you can upgrade to Windows Server 2012 firstly. After the upgrade process is completed, you can switch freely between Server Core and Server with a GUI modes.
Produces
You can follow the steps below to perform an upgrade from Windows Server 2008 R2 with a GUI installation to Windows Server 2012 Server Core mode:
1. Upgrade to Windows Server 2012 with a GUI mode
1) Firstly, please boot into Windows Server 2008 R2 with a Windows Server 2012 installation DVD inserted.
2) Select the operating system you want to install with a GUI mode.
We can see 2 options (Server Core Installation or Server with a GUI) for each operating system version. (Figure 2)
Figure 2.
Note: Please make sure you have enough disk space on system partition. Or you will get such an error in Compatibility report.(Figure 3)
Figure 3.
After the Compatibility check, the installation will continue. It will take several minutes until upgrading is done.(Figure 4)
Figure 4.
2. Switch the GUI mode to Server Core
Method 1: Using Server Manager
1) Open Server Manager, click
Manger and select “Remove Roles and Features” to start the
Remove Roles and Features Wizard.
2) In Features,
uncheck the box next to the “User Interfaces and Infrastructure” option, and then click “Next”. (Figure 5)
Figure 5.
Now tick the “Restart the destination Server automatically if required” box, then click “Remove”. (Figure 6)
Figure 6.
Method 2: Using Windows PowerShell
There are multiple ways to remove the GUI via Windows PowerShell, we introduce the way of using the ServerManager module.
You can also run the commands in Windows PowerShell with an administrator to remove the GUI feature:
“Import-Module ServerManager”
“Uninstall-Windowsfeature Server-Gui-Shell –Restart”
or
“Uninstall-WindowsFeature Server-Gui-Shell, Server-Gui-Mgmt-Infra –Restart”
It will take a period of time to remove the GUI feature and reboot. When the system boots up, you will get into the Windows Server 2012 with Server Core mode. (Figure 7)
Figure 7.
More information:
Switch between Full and Server Core in Windows Server 2012 using PowerShell 3.0
http://blogs.technet.com/b/puneetvig/archive/2012/10/16/switch-between-full-and-core-in-windows-server-2012-using-powershell-3-0.aspx
Windows Server Installation and Upgrade
http://technet.microsoft.com/en-us/windowsserver/dn527667.aspx
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hi,
Brian is right, for mange the Server 2008r2 sp1 we recommend use the Windows 7 or 7.1 platform.
More information:
Remote Server Administration Tools for Windows 7 with Service Pack 1 (SP1)
http://www.microsoft.com/en-us/download/details.aspx?id=7887
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

What is the best way to upgrade my late 2008 mbp with Leopard on it to Lion/Mountain Lion?

For whatever reason I never upgraded to Snow Leopard when it came out, and then things were a bit clunky to go to lion so I passed. I would like to upgrade to lion/mountain lion but I am not aware of any easy ways to do it, so what are my best possible options for making this happen?

Hello,
First you need to research all the problems people are having with the higher OSX versions, & make sure you have a bootable clone of what you have just in case.
then you must get 10.6 if they still have it, install it & update to 10.6.8 so you have the App Store to buy & download the huge 10.8 Installer.
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 4GB at least, more if you can afford it)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It's been pulled from the online store & Apple Stores, so you have to call Apple to buy it, last I heard.
Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
Other countries...
http://support.apple.com/kb/HE57

I just bought a new MacBook Pro. I have Word 2008 which I used for my old Mac. It's on a DVD. So how do I download it onto my new Mac book when it has no DVD drive?

I just bought a MacBook Pro. I have Word 2008 on a DVD which I used for my old Mac. How do I download it on the new MacBook since it has no DVD drive?

Connect a drive to your new computer.

How to install Leopard without working DVD-drive?

I have a MacBook Pro 3,1 (A1226) without a working DVD-drive and I would like to replace the existing 80Gb drive with a 320Gb drive. The hardware is no problem, I did that a few times already, but how to get the OS working?
I have an TimeMachine backup on a USB-disk of the 10.5.8 (9L31a) installed system. I do not wish to upgrade because there is some old licensed software on it that does not work with a newer OS.
I also have another MacBook Pro (with 10.7.5) I could hook up with an Ethernet-cable. Theoretically even with a Firewire cable I do not have right now. But when I buy extra things I should perhaps better get an external hard disk enclosure for the 320Gb?
Please advice.

Am gonna solve it in another way. I will just get a so-called "9.5 mm PATA Optical Bay SATA Hard Drive Enclosure" and put the 320Gb drive in that one. Sorry to have distracted you.

How to upgrade MacAir (late 2008) to OS X 10.6.8 without a dvd drive?

Similar Messages

Maybe you are looking for