How to upgrade my Opengl version 1.1 on my Iphone 3gs?
I want to use 2.0 version because most games require this to run. My OS is 4.3 version.
You have already been answered here: https://discussions.apple.com/message/25791777#25791777.
Similar Messages
-
How to upgrade eSourcing from version 5.1.8 Patch 3 to 5.1.8 Patch 4
Please some one can guide me How to upgrade eSourcing from version 5.1.8 Patch 3 to 5.1.8 Patch 4 since i am new in CLM.
Hello Gadewar,
First of all make sure you read all the details given in the Upgrade Guide located at "Installation and Upgrade Guide"->SAP SRM->SAP E-Sourcing 5.1/SAP CLM 2.0->E-Sourcing 5.1/CLM 2.0 Component Upgrade Guide PDF at service.sap.com/support website.
Note you need to have the support account to login to that website.
How ever I am listing down basic steps required for upgrade below.
1) Download the installables from the website I did mention above, have DB jar, have custom jar (optional).
2) Take backup of the DB.
3) Take backup of Config folder. Also take backup of the <home Dir>/Lib if you have some customizations in the form of JARS.
3) Make sure the userid which is used for connection to DB have the required permission like CONNECT, RESOURCE, UNLIMITED TABLESPACE etc. It is given in the guide I mentioned above in section 4.1 Verify Privileges of Oracle Service Account.
4) Stop ESO instance and run the setup and then upgrade scripts.
5) Undeploy the old ESO application from App server and then deploy new .EAR from new <home dir>/fsapp on the app server.
6) Start the app server and your ESO will be ready. You may need to use Workbooks to upload Localized Resources. This is the case if you have modified some OOTB localized resources in the past as a part of customization and have not used the overrides to give new resource values. If you have used overrides for localized resources in the past then you are good and need not to load the workbook.
Again usage of Workbook depends on the requirement to requirement. You may need to use workbook based upon your business needs.
Make sure you have not modified any OOTB query definitions as a part of customizations, if that is the case you will loose those query definitions as upgrade scripts overrides OOTB queries and then you should backup those as well before upgrade and then you may re-pull them after upgrade.
Regards,
Jagjeet Singh
Edited by: ESO123 on Feb 2, 2011 8:54 PM -
I upgraded the Pages version on my iPad and iPhone some weeks ago. The App has not synced previous data on both AND it's unstable on both. Luckily I didn't upgrade on my Mac where the old version is working ok!
You need the new versions of both to sync data between them. If you don't have the new versions on your Mac, they will not sync.
BTW, the new versions do NOT overwrite the old on Mac. When you install them, the old versions are retained. -
Is version 4.3.3 for iphone 3gs also ????
is version 4.3.3 for iphone 3gs also ????
How fast? And what steps have you tried thus far to reduce the battery drain?
-
How do I install the iOS 4.3 on my iPhone 3GS ? I've tried direct links but they it says safari cannot install this ? Please help !
You can not install anything but the current version of iOS. If you have a 3Gs, then you can install 6.0.1 by plugging it into your computer running iTunes (10.7 or higher). If you have a 3G, 4.2.1 is the end of the line.
-
I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. The mobile carrier signal as well as WIFI suddenly drops zero and are then restored automatically. Sometimes i cannot conenct to WIFI even standing infront of WIFI router. Please help, restoring setting even didn't helped.
Update: my phone's connecting to the WiFi again. I don't know what did the trick. I did nothing since reinstalling the software. It hadn't worked then, it is now. I tried connecting to my dad's phone's hotspot( he uses a Moto G), and it worked. I then tried connecting to the WiFi at a friend's house, and when I came back home, my phone was able to connect to my WiFi! Is it of any significance that my friend's router doesn't require a password? My issue has been resolved( for now; I hope I'm not counting my chickens before they've hatched). For anyone facing a similar issue, I suggest you try everything I did:
1. Turn your router off for a minimum of 30 seconds, turn it back on and try connecting.
2. Click on the WiFi network you are connected to, scroll to the bottom, tap "Renew Lease".
3. Do a soft and hard reset.
4. Reset network settings.
5. Back your data up, erase all content from settings menu, restore from backup.
6. Reinstall your software( put it in recovery mode).
I am not sure which of the above worked for me. Make sure you try everything. If none of the above works, take it to a genius bar or an authorised service provider. Good luck! :) -
How do I save an incoming audio message to my iphone 3gs
How do I save an incoming audio message to my iphone 3GS?
Voice mail is already saved by your provider.
If you're talking about recording a conversation, check legal circumstances first. -
How can I turn on "speak" on highlighted text on iPhone 3GS?
How can I add "speak" option to highlighted text on iPhone 3GS?
AustinReyes wrote:
I just need to locate my iPhone but my location services are off, is there any way to turn them on from another device?
Sorry... No.
Lost or Stolen iOS device > http://support.apple.com/kb/HT5668 -
How do you change the iCloud Apple ID on an iPhone 3GS?
How do you change the iCloud Apple ID on an iPhone 3GS? I changed my Apple ID on iTunes and App Store but can not change the Apple ID in iCloud....How do you do it?
There is a way, but I am not directly familiar with how; see links:
•iCloud - Apple Support:
http://www.apple.com/support/icloud/
•iCloud: Account Troubleshooting
http://support.apple.com/kb/TS3988?viewlocale=en_US&locale=en_US
But I did find this ASC discussion that may have a suitable path...
•How do I change the iCloud ID to log into a different one?
https://discussions.apple.com/message/21962709#21962709
Good luck & happy computing! -
How to upgrade to lower version
Greating,
I have CSS11506 and current version is 07.50.1.03. I am going to upgrade it to version 08.10.2.05.
However, if the upgrade will cause any problem, I need down-grade to original version.
Could anyone advice me how to down-grade?
Does it use upgrade command again? if not, please advice me the procedure or URL.
Any comments will be appreciated
Thanks in advanceHi,
http://www.cisco.com/en/US/partner/products/hw/contnetw/ps792/products_configuration_guide_chapter09186a0080405727.html
You use the same command to downgrade indeed. The CSS can hold up to 4 different images, so make sure that in the #show installed-software you have the two images you want to keep.
Once you have upgraded, if you want to revert back to the previous version, do as follow:
CSS# conf t
CSS(config)# boot
CSS(config-boot)# primary boot-file
CSS(config-boot)# reboot
If for some reason you experience an issue and cannot access the CLI, then use the OffDm as follow to recover:
http://www.cisco.com/en/US/partner/products/hw/contnetw/ps792/products_configuration_guide_chapter09186a0080405589.html -
How I upgrade my current version of Apple Safari?
I am trying to log into hotmail and the message is "upgrade your current version of Apple Safari". When I ask for software update the computer says "Software Update doesn’t have any new software for your computer at this time." what should I do?
ThanksChoose About this Mac from the Apple menu and check the processor.
If it's a PowerPC Mac, you need to switch browsers.
If it's a Core Duo Mac, click here, install the DVD, and run Software Update.
If it's a Core 2 Duo or better Mac, upgrade it as if it was a Core Duo Mac, and if desired, open the Mac App Store, and try downloading 10.9. If you get told it's incompatible, go to the online Apple Store and order a download code for Lion 10.7.
Mac OS X 10.7 and newer don't support PowerPC software such as Microsoft Office 2004. If you upgrade the OS, back up the computer first.
(110069) -
How to upgrade for latest version my iphone 4
how to upgrade to latest version
Connect your iPhone to the computer you sync with, click on the name of your iPhone under DEVICES on the far left frame, move to the right to the summary tab and click on the Update button.
-
I bought iphone 3gs in singapore last year,I had no problem to use it in Singapore & Malaysia but after i upgrade to ios5,i can't use it in malaysia.It will automatic restart my phone itself. Is it because of IOS5 problem?!Because when I register my itune a/c, I selected the country is Singapore. Anyone know what is the problem & how can I solve it?!
If it automatically restarts the phone firmware is corrupt. Restore the phone with iTunes and set up as a new phone, do not restore your backup, which is likely where the corruption is. If it then works you can try restoring just the backup. If that breaks it again you know where the problem is; you will have to start over and manually reinstall your content.
To restore just the backup, right click on the phone's name in iTunes and select "restore from backup" -
How to Activate an already Activated Straight Talk Sims on Iphone 3gs?
Hello everyone! I am in a bit of a dilema,
Previously I have had Straight Talk for over a year now on my iphone 3gs.
Though today I accidently upgraded my iphone 3gs to 6.0, and it reset Everything for me. It brought me back to the activation screen, yet I could not get past the activation screen. Itunes kept telling me, "We're sorry, we are unable to continue with your activation at this time".
I found a way to bypass the activation set up (http://www.youtube.com/watch?v=7hk5Tm_m91Y) and then I realized I was still not getting any talk or service at All. At this point most everyone else has had no trouble activating their iphones with Straight Talk just fine enough to make a call.
Is there something I can do? I don't know how to get my Straight Talk service back, even with my sims card in my phone and everything:(
Thank you in advance to anyone who is willing to help me,
-Nina Mariethe error is: Your iphone could not be activated because the activation server is temporarily unavailable. Try connecting your iphone to itunes to activate it or retry in 2 minutes.
If the problem persisits, contact apple.com/fr/suppport . -
Hello all,
Some urgent help needed on the 3 problems listed on priority basis, as follows.
P1 -> I upgraded to IOS6.1.2 on my iPhone 3GS last week and all worked fine for 2 days. Then, last Thursday (21st February) evening, the mail app started crashing and is currntly unusable. All efforts to Restart/Reset, have failed.
P2 -> With the SMS app, there is no sound/vibrate available, whenever a message comes in. Pretty annoying!
P3 -> There is extremely heavy battery drain, resulting in the phone having to be charged atleast 4-5 times a day.
On the upside, after the upgrade, the phone works really fast.
Could any of the gurus over her, offer any help or insights please?
Thanks & Regards,
sworldBackup, Restore in iTunes afresh, Setup as new, Sync personal data back with iTunes tab helps many.
Cheers
Maybe you are looking for
-
Help for date field not working after upgrade
hi experts, In our BSP application for a page we had an inputfield (date). Onvaluehelp for input field we were calling the saphelpdate function. however after upgrade this functionality is not working properly as no pop up comes after clicking on the
-
BT Fon Connection delay?
Hi all Does anyone know how long it takes between activating BT Fon on my HH v2 and the service going "live"? I went through the activation a week ago but it is still showing that Fon is not activated. I've tried the obvious disconnect, leave it a wh
-
NOT SYNCING ANY PODCASTS...PLEASE HELP!
My iPod is no longer syncing ANY of my podcasts! Initially it was only video podcasts but now it is the audio podcasts as well. This despite the fact that I can see all of the podcasts listed when I open iTunes! PLEASE HELP!
-
everything i have done has not fixed this problem, its only on my laptop on my parents laptops it works. V
-
My IT department installed photoshop CS6 - and it crashes so much it is unusable
Hi all- I have a decent laptop for work, Dell with good specs, running windows 7. Using photoshop CS6, the program crashes even with the most basic commands. Some hotkeys, or a soft brush will just shut it down. It is really frustrating, as it is pre