How to upgrade oracle from 9 to 10 version?

Hi
Can anybady help me with oracle upgrading from 9 version up 10 ?
upgrade manuals or www links are welcome
thanks

Hi,
Check the metalink Note:316889.1 for manual upgrade of 10g
regards,
phani.k

Similar Messages

How to upgrade eSourcing from version 5.1.8 Patch 3 to 5.1.8 Patch 4

Please some one can guide me How to upgrade eSourcing from version 5.1.8 Patch 3 to 5.1.8 Patch 4 since i am new in CLM.

Hello Gadewar,
First of all make sure you read all the details given in the Upgrade Guide located at "Installation and Upgrade Guide"->SAP SRM->SAP E-Sourcing 5.1/SAP CLM 2.0->E-Sourcing 5.1/CLM 2.0 Component Upgrade Guide PDF at service.sap.com/support website.
Note you need to have the support account to login to that website.
How ever I am listing down basic steps required for upgrade below.
1) Download the installables from the website I did mention above, have DB jar, have custom jar (optional).
2) Take backup of the DB.
3) Take backup of Config folder. Also take backup of the <home Dir>/Lib if you have some customizations in the form of JARS.
3) Make sure the userid which is used for connection to DB have the required permission like CONNECT, RESOURCE, UNLIMITED TABLESPACE etc. It is given in the guide I mentioned above in section 4.1 Verify Privileges of Oracle Service Account.
4) Stop ESO instance and run the setup and then upgrade scripts.
5) Undeploy the old ESO application from App server and then deploy new .EAR from new <home dir>/fsapp on the app server.
6) Start the app server and your ESO will be ready. You may need to use Workbooks to upload Localized Resources. This is the case if you have modified some OOTB localized resources in the past as a part of customization and have not used the overrides to give new resource values. If you have used overrides for localized resources in the past then you are good and need not to load the workbook.
Again usage of Workbook depends on the requirement to requirement. You may need to use workbook based upon your business needs.
Make sure you have not modified any OOTB query definitions as a part of customizations, if that is the case you will loose those query definitions as upgrade scripts overrides OOTB queries and then you should backup those as well before upgrade and then you may re-pull them after upgrade.
Regards,
Jagjeet Singh
Edited by: ESO123 on Feb 2, 2011 8:54 PM

How to Upgrade datasources from 3x to 7x versions

Hi Experts
How to Upgrade datasources from 3x to 7x versions.
I am planning to upgrade exisisting 3x data sources which are used in data loading are there any risks involved in upgrade
Thanks

Hi,
When you migrate a 3.x DataSource (R3TR ISFS) in an original system, the system generates a DataSource (R3TR RSDS) with a transport connection. The 3.x DataSource is deleted, along with the 3.x metadata object mapping (R3TR ISMP) and transfer structure (R3TR ISTS), which are dependent on it. If a PSA and InfoPackages (R3TR ISIP) already exist for the 3.x DataSource, they are transferred to the migrated DataSource, along with the requests that have already been loaded. After migration, only the specifications about how data is loaded into the PSA are used in the InfoPackage.
You can export the 3.x objects, 3.x DataSource, mapping and transfer structure during the migration so that these objects can be restored. The collected and serialized objects are stored in a local table (RSDSEXPORT).
You can now transport the migration into the target system.
When you import the transport into the target system in the after-import, the system migrates the 3.x DataSource (R3TR ISFS) (as long as it is available in the target system) to a local DataSource (R3TR RSDS), without exporting the objects that are to be deleted. The 3.x DataSource, mapping (R3TR ISMP) and transfer structure (R3TR ISTS) objects are deleted and the related InfoPackages are migrated. The data in the DataSource (R3TR RSDS) is transferred to the PSA.
Regards,
Suman

How to upgrade Oracle iFS 9.0.1 to Oracle Collaboration 10G ?

Dear experts,
I am looking a way to upgrade 9iFS 9.0.1 to the recent Content Management service(CMS) of Oracle Collaboration Suite 10G (10.1.2).
Can someone tell me how to do this?
I read the Oracle Collaboration Suite 10G installation guide, it indicated that the upgrade path from Collaboration 9.0.3.1, 9.0.4.1 or 9.0.4.2 to 10.1.2 are supported.
I also read the CMS installation guide fro CMS 9.0.3, and 9.0.4, 9.0.4.2, they indictae that indicated that upgrade from iFS 9.01. to CMS 9.0.3, CMS 9.0.4 or CMS 9.0.4.2 are supported.
But I couldn't fins information about how to upgrade Oracle 9iFS or CMS to Oracle Files (Collbaoration Suite 9i R1) 9.0.3 or R2 (9.0.4).
My questions are
1. Is Oracle Files 9.0.3 same as CMS 9.0.3?
2. If they are different, How Can I upgrade 9iFS 9.0.1 to Oracle Files 9.0.3? so I can continue to upgrade to OCS 10g R2?
Any suggestions are appreciated.
Jinsen
I have been looking the OTN, but I couldn't find a document about upgrade from

I think you should contact ORacle support on that point.

How to open project from an earlier version (RH x3) using RoboHelp 6.

Hello everyone, I need your help. I have recently upgraded
from RH x3 to RH V6. I have just completed the installation of RH6
after spending long time with Adobe customer support as it took
them long time to figure out how to provide me the unlocking key to
install RH v6.
BTW I have only installed RoboHelp 6 by itself. I did not
install their Source Control because we already have Visual Source
Safe which we have been using in our company.
Also, since I had Adobe Reader 8 installed on my PC, I did
not install Acrobat Element 7 either. As I suppose if Acrobat 7 or
higher is installed RH v6 was not going to install Acrobat Element
7.
Well, now after I have installed RH v6, my first step is to
find out how to open project from an earlier version (RH x3) using
RoboHelp 6.
RH x3 is installed on my old PC and I am working on my new PC
where I have installed RH V6.
Sorry, for providing you too many details, the purpose is
only to give you a clear picture.
Please, give me your feedback if I am doing everything
correct and how should I open the project from an earlier version.
Thanks

Hi Peter,
Thank you so much for the response. Actually, after I posted
the question on Forum we had lost internet connection for some time
and I just went ahead and tried it by myself.
This is what I did – since we use MS Visual Source
Safe, my all files were in the working folder of VSS in my c drive.
I just clicked the Open tab/More Files in RoboHelp Starter and
located the RoboHelp HTML Project File. It opened without any
problem. Everything looks alright.
Is there anything specific I should be checking to make sure
if it is working fine in this version of RH. Because I did not
create this project, somebody else did and I have never used this
tool before this is the first time I will be using.
I found your site pretty helpful though and it did have some
information about Source Safe. I still have one question related to
Visual Source Safe that Is RoboHelp v6 linked to VSS automatically
and check the files out from it automatically whenever a project is
opened or we have to manually set the link between the RH6 &
VSS.
In RH x3 whenever I would open a project it would prompt a
message that in order to open this project the following files need
to be writable, would you like to make them writable, selecting
that option would checkout all the files from the VSS to make them
writable. However, in RH V6 I opened an existing project and it
opened without checking out the project files from VSS. Do you have
any idea what’s happening?
Ps: Do you recommend any book on RH 6 for starters or any
other recommendation?
Your help is always appreciated

How to upgrade OSX from 10.5.8

Need to know how to upgrade OSX from 10.5.8 to latest version that will run on my Power Book Pro
Intel Core 2 Duo

Purcahse from Apple the Snow Leopard install DVD and install that.
Then upgrade to the 10.6.8
From there with the App Store you will be able to upgrade to whatever your MBP will support.
Allan

How to upgrade oracle 10g(10.2.0.1) to (10.2.0.4)

hai all ,
my question is how to upgrade oracle database from oracle 10g(10.2.0.1(base) to 10.2.0.4 ).
what are the consideration we have to take initially.

user603328 wrote:
hai all ,
my question is how to upgrade oracle database from oracle 10g(10.2.0.1(base) to 10.2.0.4 ).
what are the consideration we have to take initially.1. Install the 10.2.0.4.0 patchset on top of 10.2.0.X.0 ORACLE_HOME
Patchset number is : 6810189
2. Finish the post installation steps as per the patchset README (patch_note.htm)
Also check :
List of fixes included in 10.2.0.4 Note 401436.1
Known issues and alerts affecting 10.2.0.4 Note 555579.1
Regards
Rajesh

How to prevent Oracle from using an index when joining two tables ...

How to prevent Oracle from using an index when joining two tables to get an inline view which is used in an update statement?
O.K. I think I have to explain what I mean:
When joining two tables which have many entries sometimes it es better not to use an index on the column used as join criteria.
I have two tables: table A and table B.
Table A has 4.000.000 entries and table B has 700.000 entries.
I have a join of both tables with a numeric column as join criteria.
There is an index on this column in table A.
So I instead of
where (A.col = B.col)I want to use
where (A.col+0 = B.col)in order to prevent Oracle from using the index.
When I use the join in a select statement it works.
But when I use the join as inline view in an update statement I get the error ORA-01779.
When I remove the "+0" the update statement works. (The column col is unique in table B).
Any ideas why this happens?
Thank you very much in advance for any help.
Regards Hartmut

I think you should post an properly formatted explain plan output using DBMS_XPLAN.DISPLAY including the "Predicate Information" section below the plan to provide more details regarding your query resp. update statement. Please use the \[code\] and \[code\] tags to enhance readability of the output provided:
In SQL*Plus:
SET LINESIZE 130
EXPLAIN PLAN FOR <your statement>;
SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY);Usually if you're using the CBO (cost based optimizer) and have reasonable statistics gathered on the database objects used the optimizer should be able to determine if it is better to use the existing index or not.
Things look different if you don't have statistics, you have outdated/wrong statistics or deliberately still use the RBO (rule based optimizer). In this case you would have to use other means to prevent the index usage, the most obvious would be the already mentioned NO_INDEX or FULL hint.
But I strongly recommend to check in first place why the optimizer apparently seems to choose an inappropriate index access path.
Regards,
Randolf
Oracle related stuff:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle:
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/

How to upgrade WEBADI from 12.1.2 to 12.1.3

I have a issue, the system is on 12.1.2, and i want to define layout for FA-MASSADDITION DETAILED like on 12.1.3, can see the attribute1-30.
How can i do or apply any patch?

Your question is not clear. The subject of the threads is "How to upgrade WEBADI from 12.1.2 to 12.1.3" and you want to create a layout in 12.1.2
Do you mean to say that this layout works properly in 12.1.3 and you want the same layout to work in 12.1.2? If yes, please see if these docs help.
How To Add DFF In Web ADI For The Fixed Assets Addition Integrator In R12? [ID 863503.1]
Web ADI: Context Sensitive DFF Value Is not Showing on Mass Addition Form After Upload [ID 986759.1]
Web ADI: OA_FLEX_FA Error When Uploading Assets With DFF After Patch 10022011 [ID 1297196.1]
Thanks,
Hussein

How to upgrade oracle database 64bit version 10.2.0.1.0 to version 10.2.0.4

Dear Experts,
I installed SAP Solman on Oracle Database 64bits version 10.2.0.1.0, now I need to upgrade to Oracle Database 64 bits version 10.2.0.4(using oracle patch). Can I upgrade to new version 10.2.0.4 if yes, Can you explain for me how to upgrade please?
Thanks Experts so much.

Hi
Yes you can directly apply path set 10.2.0.4
Note 839187 - Oracle 10.2.0: Applying patch set/patches/patch collection
Regards
Uday

Upgrade Oracle from the version 9 to 10

Hi!
We are planning a SAP-upgrade from 4.6c with Oracle version 9 to SAP EHP4.
The target oracle version should be 10.
Questions:
1) What is the procedure to update Oracle from version 9 to 10?
1a) where can I find the appropriate documentation?
1b) with which tool should this operation be executed?
Thank you very much!

Holger,
1) What is the procedure to update Oracle from version 9 to 10?{
1a) where can I find the appropriate documentation?
1b) with which tool should this operation be executed?
You can download Oracle database upgrade from
https://websmp209.sap-ag.de/instguides>Database Upgrades>Oracle
This document explains the procedure of updgrading Oracle from version 9i to 10g
Note 720886 - Oracle Database 10g Integration into the SAP environment.pdf
Note 828268 - Oracle Database 10g New functions.pdf
After database upgrade you need to adjust the DB parameters according SAP Note 830576 - Parameter recommendations for Oracle.
Thanks
Sushil
Edited by: Sushil Suryawanshi on Jun 4, 2009 7:03 PM

How to upgrade tracks from NetWeaver 7.0 to 7.3?

Hello!
I'm trying to create a Web dynpro 7.3 track from a 7.0 track. It's for a sandbox install of 7.3 so I don't want to change the current track or SC but I want to include all my developed code for testing purposes.
I've read about track migration here:
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8061e964-2036-2e10-ee9d-ef21d174fdd9?quicklink=index&overridelayout=true
and here:
Migrating/Upgrading NWDI from 7.0 to CE 7.1
but it's missing some important information. How do I get my current code into the new track? It just says "Import your SCs and required SCs in the new track in NetWeaver 7.3".
My old track is called Extern and contains a SC called ExternSC. The new track is called Portal73 but which SC should it contain?
I can't check in my old SC without adding a dependecy to it.
Should I create a new Extern73SC with dependency to the old one? Then it wants to check in the old 7.0 dependencies as well.
I want to be able to create projects from the old DCs so they can be migrated to 7.3 as well.
The forum thread above suggest changing the dependencies of the current SC to 7.3 components and add that to the new track, but that would break my current 7.0 track, right? I tried to make a new version of the SC with the same name but I still couldn't import the existing code.
Is there a more complete source for track migration?
Please help me if you can
Regards,
Richard Linnander
Edited by: Richard Linnander on Jun 30, 2011 10:39 AM
Edited by: Richard Linnander on Jun 30, 2011 10:41 AM

Thank you for your answer!
Just to make sure I do this correctly.
I have a product called ExternProd (1.0), and an existing SC called ExternSC (1.0) that belongs to the product.
Do I need to create a new product version as well?
Otherwise I do this:
In Software catalog in SLD on the NWDI i click "new software component version"
In the dialog box I select ExternProd 1.0, unit Extern 1.0, enter vendor, name ExternSC and version 2.0 and click create.
I define dependencies to SAP SCs but NOT to ExternSC 1.0.
Now if i go to the product I see two software units for ExternProd 1.0.
I add ExternSC 2.0 to my track and then I should be able to forward the old SC and import it in development, or should it be exported and checked in?
Is this what you meant?

Upgrading Oracle from 10.2.0.4 to 10.2.0.5

Hi
We are upgrading Oracle DB from 10.2.0.4 to 10.2.0.5
How will it impact IBM ClearQuest v7.1.2? Any tips and points?

Hi,
Before 11gr2, the upgrades (for minor releases) were done with patchsets applied in the base OH.
Other methods (like installing a patchset for .5 on a new directory) wouldn't work.
So, I would suggest, creating a test environment, and doing the upgrade
or
Ask IBM :)
br,
pinela.

How to upgrade Oracle BPEL PM

Dear experts,
Is it possible to upgrade Oracle BPEL PM 10.1.3.1 to 10.1.3.4 or we have to reinstall from beginning.
Thanks
Rajesh

Hi Rajesh,
SOA Suite 10.1.3.1.0 is a base version and 10.1.3.4 is a patchset that needs to be applied on top of 10.1.3.1.0.
So. when you start the 10.1.3.4 patchset OUI, you need to give the 10.1.3.1.0 OH path, so that 10.1.3.4 gets applied on this existing OH.
Now, your SOA will be 10.1.3.4 version. Please follow the readme of 10.1.3.4 before applying the 10.1.3.4 patchset.
Regards
Anirudh Pucha

Error when upgrading Oracle from 10.2.0.4 to 11.2.0.2

Hello All,
I am running the OUI to for the Oracle database 11g Release 2 Installer (AIX 64bit.) and I am getting the error message "File not found :/oracle/NWD/112_64/oc4j/j2ee/oc4j_applications/applications/WFMLRSVCApp.ear".
I don't know why the file is missing or where to get the missing file from?
These is summary(global settings):
Disk Space: required 7.44gb, available 13.71gb
Source Location: /oracle/stage/112_64/database/install../stage/products.xms
Database Edition: Enterpirse Edition (Install database software only)
Oracle base: /oracle
Software location: /oracle/NWD/112_64
Provileged operation system groups: dba(OSDBA), oper (OSOPER)
*And the installer fails with this error message:*
*File not found*
*/oracle/NWD/112_64/owb/external/oc4j_applications/applications/WFMLRSVCApp.ear
These are the (/oracle/oraInventory/logs) installtion logs:
INFO: Copying files for 'Oracle 11g Warehouse Builder Required Files 11.2.0.2.0 '
INFO: 2/15/11 9:34:42 AM EST: Starting install Install Phase 1 of component Oracle 11g Warehouse Builder Required Files
INFO: Calling Action fileActions11.2.0.2.0 copyFile
        selectedNodes = null
        source = /oracle/NWD/112_64/owb/external/oc4j_applications/applications/WFMLRSVCApp.ear
        destination = /oracle/NWD/112_64/oc4j/j2ee/oc4j_applications/applications/WFMLRSVCApp.ear
        permissions = null
        owner = null
        group = null
INFO: Exception thrown from action: copyFile
Exception Name: FileNotFoundException
Exception String: File not found /oracle/NWD/112_64/owb/external/oc4j_applications/applications/WFMLRSVCApp.ear
Exception Severity: 2
Please HELP!
I don't know why or where to look for the missing file.
Thanks!

I am Installing the Current Patch Set for 11.2.0.2
I read the README.txt file for the Opatch and I have JDK.
I have unzipped the OPatch_11201_Generic_v3.zip file to oracle/<DBSID>/112_64/ and when I try to apply it, I get the below error:
cgunx231:oranwd 159> opatch apply
========================================================
GENERIC OPATCH VERSION - FOR USE IN SAP ENVIRONMENT ONLY
========================================================
Invoking OPatch 11.2.0.1.3
Oracle Interim Patch Installer version 11.2.0.1.3
Copyright (c) 2010, Oracle Corporation. All rights reserved.
Oracle Home       : /oracle/NWD/112_64
Central Inventory : /oracle/oraInventory
   from           : /etc/oraInst.loc
OPatch version    : 11.2.0.1.3
OUI version       : 11.2.0.2.0
OUI location      : /oracle/NWD/112_64/oui
Log file location : /oracle/NWD/112_64/cfgtoollogs/opatch/opatch2011-02-16_12-12-36PM.log
Patch history file: /oracle/NWD/112_64/cfgtoollogs/opatch/opatch_history.txt
Failed to load the patch object. Possible causes are:
The specified path is not an interim Patch shiphome
Meta-data files are missing from the patch area
Patch location = /oracle/NWD/112_64/OPatch
Details = PatchObject constructor: Input file "/oracle/NWD/112_64/OPatch/etc/config/actions" or "/oracle/NWD/112_64/OPatch/etc/config/inventory" does not exist.
ApplySession failed: PatchObject constructor: Input file "/oracle/NWD/112_64/OPatch/etc/config/actions" or "/oracle/NWD/112_64/OPatch/etc/config/inventory" does not exist.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code 73
Any ideas? Am I missing something?

How to upgrade oracle from 9 to 10 version?

Similar Messages

Maybe you are looking for