How to upgrade ram on mac mini 2009

Hi
How do I upgrade the RAM on my Mac Mini Late 2009 Model

OWC has a YouTube video on how to do this: http://www.youtube.com/watch?v=5KaHNLR6Aac

Similar Messages

  • Upgrading ram on Mac mini server - different?

    I plan to buy a mini server 2011 and upgrade it myself to 8GB.
    Is there any reason why some sellers on eBay sates DDR3 specs for a mac mini 2011 specifically for a i5 or i7 ??.... Aren't the specs provided for ram upgrade for my base model the same for the mac server ?  I'm asking since I want to order it even before I get the mini server...
    Thanks
    Rob

    The Mac Mini's and Mac Mini Servers use the same RAM
    Mac mini: How to remove or install memory
    Also OWC (macsales) and Crucial are both highly recomended suppliers here in these forums.
    Apple Mac mini Memory DDR3 / Ram upgrades for 2011 Mac mini unibody models
    Computer memory upgrades for Apple Mac mini (Intel Core i7 2.7Ghz) DDR3 - Mid 2011 Desktop/PC from Crucial.com
    Also note that OWC has gone a step farther and sells tested kits that exceed Apple stated maximum RAM compactly.

  • Mac mini 2009 mavericks won't boot. Blank display no logo,etc. Tried all keyboard boot functions, no help. replaced RAM w/known good. No help. Removed HD mounted in external enclosure and ran permissions and repair. No help. Upgraded HD to Yosemite a

    Mac mini 2009 Mavericks won't boot. Chimes and power light comes on. USB ports have power. Blank display no logo,etc. Tried all keyboard boot functions, no help. Replaced RAM w/known good. No help. Removed HD and mounted in external enclosure and ran permissions and repair. No help. Upgraded HD to Yosemite and was able to boot another mini from HD mounted in external enclosure, reinstalled HD still no boot. Any ideas on how to proceed appreciated.

    - Make an appointment at the Genius Bar of an Apple store. You have a hardware problem.
      Apple Retail Store - Genius Bar

  • How do I use a Sony DCR-TRV310 for FaceTime in a Mac mini 2009?

    How do I use a Sony DCR-TRV310 for FaceTime in a Mac mini 2009? Sorry, I mean Mini mid2010.
    Message was edited by: tesoro1

    lllaass speaks the truth. Macs have always been "plug & play" with everything except cameras. That's the one area where you MUST have compatible hardware or you're simply S.O.L.

  • Should I upgrade to OS 10.10 Yosemite from 10.85 on a Mac Mini 2009 (2.53Mhz 2duo, 4M 500HD) ?

    Hi ... I asked this question a few months back ... and I received a few "yes you should" answers but I felt there was not much evidence to support recommendation ... but I am hoping that more people have had a chance to experience the OS on a low powered machine.  I have a Mac mini 2009 (2.53Mhz , 500 hard drive and 4 gig memory).  The mini is currently very happy with 10.8.5 (but I have yet to transfer all my media over from my Mini 1.6Mhz running 10.6) .
    So will I see a performance drop if I install the free 10.10 upgrade ?
    Many thanks

    woodmeister50 wrote:
    If your apps aren't, are you willing to pay the price to bring them
    up to a compatible version?
    roaringapps.com can help show what other users have found to work on various OS X releases.
    I would recommend installing to a fast external disk as a test if you are so concerned. Also keep a backup when/ if you upgrade & then you have little to lose.
    Just be aware that iCloud can get updated for iCloud drive, which will lock older OS's out of that feature, so opt out if you are not sure.

  • Upgrade memory on mac mini (late 2012) Core i7

    I want to upgrade memory on Mac mini to 16 GB. Can you recommend some RAM models. Following are the readily avaliabe models for me.
    Also curious to know what is ment by "value select"
    1. Corsair 8GB DDR3 1600MHz Value Select PC3-12800 204 Pins, So-DIMM, Unbuffered, NON ECC , 1.5V
    2 .Corsair 8GB DDR3 1600MHz Vengeance PC3-12800 204 Pins, So-DIMM, Unbuffered, NON ECC , 1.5V
    3. Transcend 8GB DDR3 DDR 1600 Mhz PC12800

    Macs can be very Fussy about RAM...
    You can use these Links to check which RAM is suitable for your Mac...
    http://eshop.macsales.com/shop/apple/memory/
    http://www.crucial.com
    It is Important to get the Correct and Matching RAM
    Those sites also have videos on how to Install RAM should you need it...
    Apple Instructions here >  http://support.apple.com/kb/ht4432

  • Windows 7 on Mac Mini 2009

    Hi
    I did install Win 7 64 usisng bootcamp app on my SL installation.
    Win 7 works fine, but the Boot Camp driver from my SL DVD wont install. It quits with an requester saying:
    'boot camp x64 is unsuported on this computer model'
    I checked sveral times now the support and readmes. The Mac Mini 2009 is supported. How can I install the 3.0 driver from my SL DVD?
    Message was edited by: Helge Schwarz

    quick answer:
    When you are in Windows
    create folder ("Apple Boot Camp Drivers" for instance)
    copy the contents off the OS X DVD \Bootcamp
    navigate to \Apple\Drivers\Bootcamp64
    Instead of just Open or run,
    control + click and choose "troubleshoot compatibility"
    chalk it up to weak support for Windows on Mac etc
    PS: the error message? made it title, and it gets asked regularly.

  • Is that true, use 16 Ggo RAM on mac mini mid 2011?

    is that true, to use 16 Ggo RAM on mac mini mid 2011?

    macsales.com (other world computing) is a good source for quality RAM and says "yes": http://eshop.macsales.com/shop/mac-mini/
    crucial.com is another trusted source of RAM.
    Be sure you get the correct RAM as advised by the website and do not try faster RAM.
    ifixit.com shows you how to install it: http://www.ifixit.com/Device/Mac_Mini_Mid_2011

  • 8 GB RAM for Mac Mini Mid-2011?

    I am looking for the correct version to install in my Mac Mini 2011. I found http://www.amazon.com/Crucial-PC3-10600-SODIMM-204-Pin-CT2C4G3S1339M/dp/B008LTBI T4/ is that the correct version that is compatable with my device?

    check out > Mac mini (Mid 2011): Memory specifications and upgrades - Apple Support
    FWIW I will only buy RAM straight from Crucial or OWC.
    try > http://www.crucial.com/usa/en/compatible-upgrade-for/Apple/mac-mini-%28mid-2011% 29
    or > http://eshop.macsales.com/shop/mac-mini/

  • How can i get mynew mac mini to use the drive in my old mac pro

    When I first got my new mac mini it dosen't have an internal drive.   So I hooked it up on the network and fire wire.  I could use the superdrive in the mac pro just fine  both itunes and the dvd player worked as they would with a internal drive.   But now a couple of upgrade down loads later not so much.  yes I can connect with screen share and can get the dvd player to play dvd's but still can't get itunes to use the superdrive.  Iht exect disk icon in the apple menue bar use to open and close the super drive but now it reads "no disk" How can I get my mac mini to automaticly use the superdrive when i turn on the mac pro. 
    I've done all the easy things changing the order of start up and share settings and i sware it did work ok when i first hooked it up.

    http://www.totalapps.net/mac/remote-disc-sharing-when-the-superdrive-doesn’t-wor k-2/
    Mind you, booting off the external optical drive of another computer may not be practical because of the different operating system limitations of the computers.   I would just purchase an external optical drive from http://www.macsales.com/ if you find it doesn't work.

  • How can I fix my mac mini g4 1.5ghz which gets the must reboot message?  what is the reason?

    How can I fix my mac mini g4 1.5ghz with 2gig ram which gets the must reboot message randomlly?  what is the reason?  Hard disk has no errors.

    Based on your description, you are having a kernel panic.
    Can you post some of your crash logs? Might be a clue. See Mac OS X: How to log a kernel panic http://support.apple.com/kb/HT2546
    Understanding crash logs isn’t easy and it’s hard (sometimes impossible) to decipher the cause of the problem. Take a look at Apple’s Crash Reporter document at http://developer.apple.com/technotes/tn2004/tn2123.html Also look at Tutorial: An introduction to reading Mac OS X crash reports
    http://www.macfixit.com/article.php?story=20060309075929717
    Kernel panics are usually caused by a hardware problem – frequently RAM, a USB device or a Firewire device. What external devices do you have connected? When trying to troubleshoot problems, disconnect all external devices except your monitor, keyboard and mouse. Do you experience the same problems?
    To eliminate RAM being the problem, Look at this link: Testing RAM @ http://guides.macrumors.com/Testing_RAM Then download & use Memtest & Ramber.
    Do you have an Apple Hardware Test disc (the AHT is on the Install/Restore DVD that came with your Mac)? Running the Apple Hardware Test in Loop Mode is an excellent troubleshooting step for finding intermittent hardware problems. It is especially useful when troubleshooting intermittent kernel panics. If Loop Mode is supported by the version of the Apple Hardware Test you are using, you run the Extended Test in Loop Mode by pressing Control-L before starting the test. Looping On should appear in the right window. Then click the Extended Test button.The test will run continuously until a problem is found. If a problem is found, the test will cease to loop, indicating the problem it found. If the test fails, be sure to write down the exact message associated with the failure.In some cases, RAM problems did not show up until nearly 40 loops, so give it a good run.
    May be a solution on one of these links.
    http://docs.info.apple.com/article.html?artnum=106227 What's a "kernel panic"? (Mac OS X)
    http://www.macmaps.com/kernelpanic.html Mac OS X Kernel Panic FAQ
    http://www.index-site.com/kernelpanic.html Mac OS X Kernel Panic FAQ
    http://www.thexlab.com/faqs/kernelpanics.html Resolving Kernel Panics
    http://www.macfixit.com/article.php?story=20060911080447777 Avoiding and eliminating Kernel panics
    http://macosg.com/group/viewtopic.php?t=800 12-Step Program to Isolate Freezes and/or Kernel Panics
     Cheers, Tom

  • How can I control a mac mini connected to a benchmark dac 2 for the purpose of listening to 24/192 audio files?

    How can I control a mac mini connected by USB to a Benchmark DAC 2 for the purpose of listening to 24/192 music downloads?

    Hello,
    About the dac 1, but may apply to the dac 2 as well in some ways...
    Here are more details:
    1) The current version of iTunes (7.5) for OSX is very broken. Some older versions work properly, but 7.5 introduces truncation and DSP artifacts that can measure as high as –80dBFS. These levels are easily audible. There is no system configuration that will permit transparent playback from 44.1kHz sources with iTunes 7.5. Curiously, the only format that works properly in 7.5 is 24-bit/96kHz. This iTunes problem has nothing to do with USB communications, as the results are the same when using the built-in optical port on our PowerBooks. As a workaround, we suggest using the free VLC for Mac player. VLC works perfectly with all formats (provided OSX is set to match the sample rate of the files being played). We highly recommend the VLC player for OSX users, and strongly advise against using iTunes. We will attempt to identify which versions of iTunes work and which ones don't. But beware, iTunes updates itself without user intervention. One of our test computers "upgraded" itself to the dysfunctional iTunes 7.5.
    2) OSX still does not have the ability to follow sample-rate changes. We consider this a nuisance for most users and a show-stopper for users who want to play a mixed list of 44.1kHz and 96kHz material. An OSX sample-rate mismatch will invoke the very-poor-quality sample-rate conversion that is built into OSX. The iTunes 7.5 bug seems to be locking on this sample-rate conversion at all sample rates other than 96kHz. Until this is fixed, OSX is not the operating system of choice for audio playback.
    http://www.stereophile.com/content/benchmark-dac1-usb-da-processor-headphone-amp lifier-manufacturer-comment

  • Installed 8gb RAM on mac mini model A1347 but it won't recognize past 4gb, any way to fix this to recognize the full 8?

    Installed 8gb RAM on mac mini model A1347 but it won't recognize past 4gb, any way to fix this to recognize the full 8?

    What RAM did you buy?
    Try reseating the modules, they need to be pushed firmly into the slots before tilting them down into the clips.
    see > Mac mini: How to remove or install memory

  • Mac mini (2009) does not work for s-video input on my  tv

    Hi,
    I have a new mac mini (2009) and I want to use like a media center. I have an adapter at MiniDisplay port to s-video to connect to my tv. I do not have digital inputs on the tv, I only have s-video, rca and scart. When I plug in s-video or RCA I have no image on TV. The adapter I have is the original apple store. Can you help solve the problem? I do not like having to change the tv.
    Thank you

    See this thread:
    http://discussions.apple.com/thread.jspa?messageID=9170520
    !http://images.monoprice.com/productmediumimages/47241.jpg!

  • How do I use a Mac Mini + Airport Express + Time Machine disk to backup another iMac

    How do I use a Mac Mini + Airport Express + Time Machine disk to backup another iMac?
    The question pretty much says it all.
    I have a Mac Mini with an attached 3TB Hard Drive used for Time Machine Backups.
    I have an Airport Extreme base station which services that machine plus several others.
    I would like to backup my new iMac and a MacBook Pro to the Mac Mini.
    What do I need to do on the mini to export that hard drive so that it can be used as a Time Machine target from the other systems?
    All systems are running 10.6.8.

    Well you would have to do backups over a network which is much slower and has highest chance of becoming corrupt. I think your best option would be to get an apple time capsule to act as a network and back if thats how you wanna do that

Maybe you are looking for

  • How do I use NI-Motion tools to directly control a P70360?

    I can currently control a P70360 via modbus commands. I am interested in using NI-Motion routines to do this, if possible. But all the examples and VIs seem to assume there is an intermediary controller card, between the AC Drive and my labview app.

  • Regarding im52 transaction

    Dear PS consultants, While processing the transaction IM52 i am getting an error message as NO MEASURES FOUND. Can any one help me out, where i had done misatake. I created project and wbs elements and activated availbility control and budgeted. and

  • Bindows in EPM 11.1.2.2

    I just installed EPM 11.1.2.2 on Win 2008R2 64bit.  Install and configuration went smoothly.  When I try to launch either Workspace or Shared Services, all I get is a window labeled Bindows and it says "Bindows belongs to MB Technologies..."  I know

  • LDAP Configuration for ECC 6.0 ( ABAP Stack only)

    Hi, Can any one guide me with the steps for the LDAP Configuration for ECC 6.0 ( Abap stack only). Some of my observations are.... I can see the LDAP Support in the Installation master at the following path. 1. Additional Software Life cycle Tasks --

  • Changing custom report function

    Post Author: BerlinOlaf CA Forum: .NET Dear all, is there a way to chang/insert a custum report function by using .Net? There is no Repository in my scenario... thanx Olaf