How to upgrade SCCP 7960 phone to SIP

Someone asks me to convert a phone to SIP to do some SIP tests.
I only have a callmanager 4 at this time, which I wanted to use for this upgrade.
I copied all SIP firmware to the TFTP folder, changed the load in the device (on ccm 4.1) to the good load
However, it says protocol application failed.
Any help is appreciated.
Dirk

Make sure to follow this document:
http://www.cisco.com/en/US/products/hw/phones/ps379/products_tech_note09186a0080094584.shtml

Similar Messages

CME 7.1 with SCCP 7940G phones and SIP connection to a VOIP provider - inbound outbound fails

Here's a quick and dirty diagram of a CME 7.1 configuration. The phone can all call each other but something is not quite right with the SIP provider. The registrar and SIP registration pieces are working but most of the configuration examples that I've seen make me think that the CME router was being used as the edge device to the internet. From my drawing, you can see that is not the case here. My edge device is a Cisco ASA5505 with 9.2.x software running. I might be missing something in the SIP gateway knowledge department. Without diving into the configuration, I'm wondering if SIP messages are failing for calls because of NAT'ing? Trying to do searches has been tricky because I keep running into information that is more about setting up CME for SIP phones or just getting SIP to work between CME and a SIP provider. I have that part working. I'm just a bit unsure about how an SCCP 7940G gets an outbound call or even gets one to come in.
When I dial from my cell phone to the pilot number, there are no rings, it just goes to the VOIP provider's voice mail. When I try to dial out, I get a fast busy.
So, is NAT a consideration? Will the SIP gateway set up a call (forward) via the pre-established SIP connection? Yeah, I do sound like a newb.
If anyone has good information about, let's say, an inbound call and how that traffic flow works.
Thanks!

Have you configured your ASA to either NAT the IP address of the CME router or to do port forwarding for port 5060?

HT1414 How to upgrade the firmware on i phone

Please advise how to upgrade the I Phone 4 ???

Connect iPhone to syncing computer using USB cable.
Start iTunes on syncing computer.
Follow prompts from iTunes to upgrade.

Upgraded to ios7, then clicked on the update to THAT... now black screen/NO phone!!! What happened? How do I get my phone back??

I went thru upgrade to ios7, then a few days later there was an alert in settings, so I clicked on the update to THAT upgrade... then my phone went black... no turning off or on. So I plugged into my PC and it will only show an iTunes logo a small white arrow up and then a pic of hte cord attached.... computers won't recognize phone, but sometimes show a 'device' there, but no opening anything... and it shows NO device driver for apple iphone. what's happened??? HOW dod I get my phone back! This is a work phone... need asap! thanks!

Restore the backup from your computer

I used an upgrade from a different phone to purchase a new iPhone. How do I assign that phone its original number (not the one that it was upgraded from)?

I used an upgrade from a different phone to purchase a new iPhone. How do I assign that phone its original number (not the one that it was upgraded from)?

Phone number of the device is assigned by the carrier.
Ask the carrier.

HT1212 I do not know my four digit passcode for my iphone 5. I just upgraded to iOS7. How do I unlock my phone? My phone is disabled because of failed attempts.

My iphone 5 is disabled due to too many attempts to unlock four digit passcode. I upgraded to iOS7 last night and it asked for a passcode this morning. I do not ever remember assigning a passcode. How do I get this phone disabled and figure out what my passcode is?

Read the article that you linked

How to upgrade firmware on 7921g wireless phone from 1.0.2 to 1.0.4 via USB

how to upgrade firmware on 7921g wireless phone from 1.0.2 to 1.0.4 via USB?
The 7921g is connected via USB to a PC. I am using a browser to access the phone. Documentation says "Click the Phone Upgrade hyperlink under SYSTEM options. " but that option is not present or not visible.

You can use the Phone Upgrade area on the web page to upgrade firmware files on the phones by using the USB connection or by using the WLAN. To upgrade the phone software, enter the phone software TAR (firmware file name) or use the Browse button to locate the firmware file on the network.
To display the Phone Upgrade area, access the web page for the phone as described in the Accessing the Configuration Web Page for a Phone section available at http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7921g/5_0_1/english/administration/guide/21adm50.pdf

I have upgraded my I phone's ios from ios 6.1.4 to ios 7. After that my phone is very slow and getting hang. So now I wants to downgrade from ios 7 to ios 6.1.4. Please let me know how I can do it

Subject: need to downgrade ios
I have upgraded my I phone's ios from ios 6.1.4 to ios 7. After that my phone is very slow and getting hang. So now I wants to downgrade from ios 7 to ios 6.1.4. Please let me know how I can do it

You cannot downgrade.

HT1688 I upgraded my Iphone 4s with the new operating system. After the upgrade was performed all my contacts were lost. How do I recover my phone contacts?

I upgraded my Iphone 4s with the new operating system. After the upgrade was performed all my contacts were lost. How do I recover my phone contacts?

Synch them back from whatever contact manager or cloud service you stored them in.

HT4623 I recently upgraded my i-phone 4s phone with the new iOS7. Since that all the applications that I have opened will not close. How do I close applications that are running in the background?

I recently upgraded my i-phone 4s phone with the new iOS7. Since that all the applications that I have opened will not close. How do I close applications that are running in the background?

Double click your Menu button and swipe up the open Apps to close them.......

HT5457 i upgraded my 3gs phone from iOS 4 to iOS6. How to set up the phone now?

i upgraded my 3gs phone from iOS 4 to iOS6. How to set up the phone now?

I'm sorry, but Apple does not provide a downgrade path for iOS. Because downgrading is unsupported by Apple we cannot discuss it on these forums, but you can use Google to find information on how to install an older version of iOS on any iDevice.

HT1476 I Have iphone 2g, how to upgrade my phone

I Have iphone 2g, how to upgrade my phone

There is no such thing as an iPhone 2G. There was the original iPhone, then the 3G, 3Gs, 4, 4s and now the 5.
If you have an original iPhone (1st generation) then the highest version of iOS it can run is 3.1.3. If you have an iPhone 3G, the highest iOS it can run is 4.2.1.
Neither of those first and second iPhone models can be upgraded beyond those versions of iOS.
You would have to buy a new phone if you want to run any iOS version higher than those. The iPhone 3Gs can run the most current, iOS 6.1.3 but it will not be able to run iOS 7 when that is released this autumn.

SCCP IP PHONE 7911 ERROR WHILE UPGRADING FIRMWARE

Hi All ,
I am experiencing problem while upgrading Cisco IP phone model 7911 in my VoIP setup as my Cisco CM server is using firmware version ‘SCCP11.8-3-4SR1S’ for these phones. Whereas new 7911 IP phones coming from Cisco as RMA these days are having latest firmware version ‘SCCP11.9.2(1)’. While resetting the phones to factory defaults they are getting hanged during upgradation and giving error ‘ term11.default’. As per my research, i cannot upgrade or downgrade phone firmware from sccp11.8-3-4 to sccp11.9.2 and vice versa directly.
So i read the release notes of 9.2.1and there I found, i have to upgrade phone first in 8.5.2 base release and then I can go any version.
But when I am upgrading my phone into base release 8.5.2, sometime my phone prompt me ''ERROR'' on display and boot from its previous ifirmware and sometime it prompt ''UNPROVISIONED'' on the display and phone get stuck there.
My CUCM version is                     -6.1.2.1000
IP PHONE FIRMWARE version     -SCCP11.8-3-4SR1S(existing)
NEW load version                         -SCCP11.8.5.2
So request to all expert please suggest me to fix my issue.
regards
amit tanwar

Hi All ,
Anyone have any solution for my issue ?.
regards
amit

Personal Address Book Service PAB for 7960 phone on UC 7

I have created a service for PAB to allow administrator to enter in user name and PIN so users are not prompted to do so. Users want to quickly access PAB and are frustrated. Currently they have to select SERVICES button then PAB service then get a menu with 1 - Personal Address Book, 2 - Personal Fast Dials, 3 - Log Out. Is there a way to modify the service to bypass this menu and go directly to the Personal Address Book? This is what I am currently using.
http://servername-or-ipaddr:8080/ccmpd/login.do?name=#DEVICENAME#&service=pd
Second question is that the default Personal Address Book under Directories button is not being displayed on the 7960 phone but is on the 7965 and 7970/1 phones. Is there a firmware upgrade that would allow this. Not a big deal as we don't want users to have to log in so will probably stay with the service. Just curious.
Thanks.

Hi Jodi,
Yes, a direct link to the Personal Address Book can certainly be used with the appliance model Cisco Unified Communications Manager servers. Please see the Release Notes for CSCsl95467 for instuctions on how to set it up.
The URL used to access it directly is:
http://server-name-or-ipaddr:8080/ccmpd/login.do?name=#DEVICENAME#&service=pab
Kind regards,
Craig

2 iphones 1 computer. updated my wifes phone to ios 5 her phone got wiped of all apps and all my contacts are on her phone. we had been using the same apple id but different user accounts on our laptop. How do i get her phone back to normal?

2 iphone 4, 1 computer. i upgraded to ios 5 and just updated my wifes phone as well. her phone got wiped of all apps and all my contacts were put on her phone. we had been using the same apple id but different user acct on our laptop. How do i get her phone back to normal??

Have your wife log in to her user account on the laptop. Launch iTunes, then connect her phone to the computer with the USB cable. Sync. That should put back all apps and media. Since you already upgraded her to iOS 5 she'll have to manually enter all her settings and preferences, and organize her home screens.

How to upgrade SCCP 7960 phone to SIP

Similar Messages

Maybe you are looking for