How to upgrade Support Package for NSP (Netweaver Sneak Preview) server?

hello guru,
I have installed Netweaver Sneak Preview on my notebook. This ABAP Application Server 7 's support package is 12. Can I upgrade it to the newest support package? Can I do it in the normal way, just like normal SAP server, use SPAM?
Thanks a lot.

Hi, is there any way, how to aply enhancement package 1 on abap trial 7.0? Thanks for reply

Similar Messages

  • Upgrade Support Package for one Software Component

    Dear Experts,
    I am new with SAP Basis Administrator and I have new task to upgrade EA-HR software component from release 600 sp30 to release 602 sp9.
    Actually, EA-HR component in Development system already in release 602 sp9 while quality and production in release 600 sp30. This is where the problem started, since there is one SAP Note we need to apply that depends on the release version. The consultant wants to do the changes in development and transport it to quality then production. Since the way to apply SAP Note is vary based on EA-HR release version, the consultant wants the release version of EA-HR in all systems to be the same.
    I have download support package for EA-HR 602 sp9.
    My question is very basis, how to upgrade EA-HR component to release 602 sp9?
    Regards
    Rian Wisandanu

    EA-HR component in Development system already in release 602 sp9 while quality and production in release 600 sp30
    This is a no go... This is why most people call for a development freeze while the system is been patched.
    the consultant wants to do the changes in development and transport it to quality then production. Since the way to apply SAP Note is vary based on EA-HR release version, the consultant wants the release version of EA-HR in all systems to be the same
    You system is not consistent, transporting data into a system with a different patch set can cause serious problems. You are going to have to tell your consultant that he'll have to wait until the whole landscape is patched to the same level.
    Who upgraded the component in DEV??
    The note also states that this corrections are available for 600 so there was no need for 602 if you are not planning a EHP upgrade..
    EA-HRRXX   600  SAPK-60050INEAHRXX
    Maybe you can give us some more info about what are you planning to do with your system patch wise?
    Regards
    Juan

  • Download of ABAP Support Packages for SAP Netweaver PI 7.1

    Hello all,
    I'm just working on upgrade SAP Netweaver PI 7.0 to PI 7.1 and we have no functional connection to SAP OSS and therefore I'm not able to aprove some Support Packages via Solution Manager.
    PLEASE - Can somebody download the following Support Packages and copy it via ftp:
    BW Support Package 06 for 7.10 - SAPKW71006
    BW Support Package 05 for 7.10 - SAPKW71005
    Basis Support Package 06 for 7.10 - SAPKB71006
    Basis Support Package 05 for 7.10 - SAPKB71005
    ABA Support Package 06 for 7.10 - SAPKA71006
    ABA Support Package 05 for 7.10 - SAPKA71005
    PI_BASIS 2006_1_710: patch 0006 - SAPKIPYN06
    PI_BASIS 2006_1_710: patch 0005 - SAPKIPYN05
    FTP data:
    server: ftp.vse.sk
    username: sap
    password: Supp0rtpack
    Thanks for your time and help.
    Best regards,
    Slavomir Kysel.

    Solved by SAP Walldorf.

  • How to import Support Package 13(SAPKW70013) for SAP NetWeaver 2004s BI

    Hi,
    How to import Support Package 13 for SAP NetWeaver 2004s BI (BI Patch 13 or SAPKW70013)
    Note no for that is : 1019055.
    Thanks in Adavance,
    Dushyant.

    Hi,
    RTC for BI 7.0 SAP_BW SP 13 is scheduled in CW 21, that is coming week, after that you should be able to download it from service market place.
    @others: Dont get confused about SPS release with SP release. BI has intermediate release which is SP release, SPS is SP-Stack release (which is NetWeaver release).
    SP 12 correspond to SPS 12 which is sceduled CW 21.
    Hope this helps.
    Best Regards,
    Rajani

  • Customer exit is not functioning after ECC upgrade/support package

    It seems our customer exit is not functioning after ECC upgrade/support package. I tried to activate the project again, no use. please help. Thanks! (see below for the enhancement info)
    COZF0002 Change purchase req. for externally procured component
    EXIT_SAPLCOZF_002
    INCLUDE ZXCOZU02
    *&  Include           ZXCOZU02
    CONSTANTS: lcc_eban(25)   TYPE c VALUE '(SAPLCOBC)EBAN'.
    FIELD-SYMBOLS: <fs_eban>   TYPE eban.
    DATA: l_fkstl TYPE prps-fkstl.
    Move values from the LUW to the Internal Table
    ASSIGN (lcc_eban) TO <fs_eban>.
    If the field symbol is "NOT' empty then proceed
    IF ( <fs_eban> IS ASSIGNED ).
    if WBS work order, get cost center from PRPS
      IF ( caufvd_imp-auart = 'ZM05' ).
        SELECT SINGLE fkstl INTO l_fkstl FROM prps
          WHERE pspnr = caufvd_imp-pspel.
        IF ( sy-subrc = 0 ).
          WRITE l_fkstl TO <fs_eban>-zzfistl.
        ENDIF.
    if not WBS WO, move cost center minus leading zeros to funds center
      ELSE.
        WRITE caufvd_imp-kostl TO <fs_eban>-zzfistl.
      ENDIF.
    ENDIF.

    Did you mean set a break point in the follow code?(Include ZXCOZU02), I tried set a break point in this code, but It didn't stop .
    *& Include ZXCOZU02
    CONSTANTS: lcc_eban(25) TYPE c VALUE '(SAPLCOBC)EBAN'.
    FIELD-SYMBOLS: <fs_eban> TYPE eban.
    DATA: l_fkstl TYPE prps-fkstl.
    Move values from the LUW to the Internal Table
    ASSIGN (lcc_eban) TO <fs_eban>.
    If the field symbol is "NOT' empty then proceed
    IF ( <fs_eban> IS ASSIGNED ).
    if WBS work order, get cost center from PRPS
    IF ( caufvd_imp-auart = 'ZM05' ).
    SELECT SINGLE fkstl INTO l_fkstl FROM prps
    WHERE pspnr = caufvd_imp-pspel.
    IF ( sy-subrc = 0 ).
    WRITE l_fkstl TO <fs_eban>-zzfistl.
    ENDIF.
    if not WBS WO, move cost center minus leading zeros to funds center
    ELSE.
    WRITE caufvd_imp-kostl TO <fs_eban>-zzfistl.
    ENDIF.
    ENDIF.

  • How to upgrade my iPhone for iOS 4.0

    how to upgrade my iPhone for iOS 4.0

    If you have an iPhone 3g you can upgrade to iOS 4.2.1.  If you have a 3gs or later, you can upgrade to iOS 6 (only).  Connect your phone to the computer you normally sync with, and update from iTunes.
    The User Guide is available at http://support.apple.com/manuals/ or downloadable from iTunes as an iBook.

  • I can't find any support package for Solution Manager 4.0

    I can't find any support package for solution manager at
    Support Packages and Patches - > SAP Technology Components
    SAP Technology Components
    GATEWAY
    JAVA LOG VIEWER
    SAPCAR
    SAP EXCHANGE CONNECTOR
    SAP CR CONTENT
    SAPROUTER
    SAPSECULIB
    SAPSSOEXT
    I'm searching it at a wrong place?

    You´re at the right place - but your user doesn´t seem to have permissions to download them.
    You have a license for Solution Manager?
    Markus

  • How to apply sap license for Sap Netweaver AS Java

    Hello guys,
    May i know how to apply sap license for SAP Netweaver AS Java?  Appreciate the reply, thank you
    regards,
    wei how

    Hi Lee,
    check below link:
    http://help.sap.com/saphelp_nwce10/helpdata/en/9f/5e533e5ff4d064e10000000a114084/content.htm
    Thanks
    sunny

  • Latest support pack for sap srm 5.0(server 5.5)

    Hi,
    Pls let me know the latest support pack for sap srm 5.0(server 5.5).
    Thanks,
    Manu

    Hi Muthu,
    if we take e.g. note 1302207. This was created a short while ago after SP14 was delivered. It has to be included in the next support package.
    So the entry with SP15 here means that it is included in SP15 if it is released.
    Hope that i could help.
    Best regards,
    Georg

  • HT1899 Hi There. Is there a version of BootCamp support software for Windows 8 Customer preview?

    Hi There. Is there a version of BootCamp support software for Windows 8 Customer preview as yet?

    8 is now Release Preview, not CP, and there is the final release 90-day trial Enterprise which is all cleaned up and ready to use.
    So at least someone should be going over with this by now. Things I had that did not work right and unsupported with the Previews are working, but some, a few, need updates.
    I don't think most of the issues people have with Mac running 8 are deal breakers or can't be worked around, maybe 2-3 items and heck even 'supported' - if it worked plug and play and no issues... the forum would be dead silent, but it isn't.
    Not going to do it again but I have tried to post a consolidated of trackpad, graphics, audio, BT, and other things that get mentioned.
    8 won't be ready to buy for full two months.

  • SAP NetWeaver Sneak Preview and Trial

    Hi,
    I am new to SAP Netweaver Enterprise portal (java)
    I donloaded  SAP Full Java Edition-Trial -SAP NetWeaver 04 SP16. which is with out visula composer support.
    There is another SAP NetWeaver Sneak Preview and Trial.
    Which with visual composer support.
    That is Full Java Edition2004s-Trial - SAP NetWeaver 04s SP7.
    so let me know which Service pack is first.
    Weather SP16 is first or SP7 is First.
    regards
    mmukesh

    Hi mmukesh,
    you have to understand that there a two seperate NetWeaver releases (NetWeaver 2004 and NetWeaver 2004s) with their own support packages.
    Read more here:
    Re: difference between 2004 and 2004s?
    Regards,
    Martin

  • NetWeaver Sneak Preview  Installation

    <b>Hi Eveybody:
    I am trying to learn SAP Netweaver Enterprise Portals.
    I just downloaded the three NetWeaver Sneak Preview files NWpart1 NWpart2 NWpart3
    I want to install NetWeaver.If anybody knows, how to install it, Please let me know.
    I really appreciate your help.
    (and point too.)
    Thanks in advance.
    Ashok Kumar</b>

    Hello ASHOK,
    Unzip those three files under a directory of your choice. Then under your directory/smoke execute the start.htm page and there check the hardware and software requirements. If everything is ok, launch the installation process (there's a link for that purpose on the start.htm page).
    Regards,
    villalain

  • Fail to connect GUI to NetWeaver Sneak Preview

    Hello,
    I have just downloaded SAP NetWeaver Sneak Preview (ABAP).
    Installation was completed without any problems.
    GUI installation afterwards also did not show any problems. (Local Installation).
    However as I tried to logon with the GUI there was the following error message:
    "partner not reached (host 127.0.0.1., service sapdp01)
    Error No 10061
    Error Text WSAECONNREFUSED: Connection Refused
    What could be the reason for this? By the way, how do I
    1. Start the Application Server? Maybe it was not running, but there are no icons either.
    2. How do I uninstall all components, e.g. there was a new windows user defined during installation etc.
    Thank you very much for your help!

    First of all, thank you very much for your helpful advice. I will immediately try to do set up the loopback adapter.
    One more question: Is it necessary to start the server / ABAP Engine before logging in with SAP GUI?
    Unfortunately I do not see any entries in the Start Menu to start or stop the server.
    Thank you again!

  • Problem in installin SAP Netweaver Sneak Preview

    While trying to install the SAP netweaver sneak preview I got this error at the second step of the installation “SAP System installation”…..
    "An error occured while processing service sneak preview edition of SAP web application server java 6.4  install sap web application server java 6.4
    you may now
    press retry to repeat the current step.
    press view log to get more information.
    stop the task and continue with it later.
    reset your input for the current task .in this case SAPinsti will permenantely remove all installation files from the installation directory. This gives you the oppurtunity to start from scratch."
    Can someone kindly guide me as to what to do..
    (1)when I pressed retry I again got the same screen.
    (2)when I pressed reset and again started from scratch I again got the same error.
    (3)the view log shows
    “ERROR 2005-12-27 11:06:09
    CJS-00081  Assertion failed: in function () {    var changed = false;    var nodeName = (new NetworkMgt()).getServicesFileName();    var mgt = new FileMgt();    var node = mgt.getNode(nodeName, true);    ASSERT_DEFINED(arguments.callee, node, "node(" + nodeName + ")");    node.saveVersion();    for (var it = this.getInstances(); !it.isDone(); it.next()) {        var instance = it.get();        if (instance.installInstance()) {            changed = instance.createPorts() || changed;        }    }    installer.writeInfo("ind-rel.ind-os.ind-db.j2ee-eng.creatingPorts", this.getSID());    if (this.j2eeStandalone) {        var port = this.getSCSMSPort();        if (port) {            changed = WebAS.createPort("sapms" + this.getSID(), "tcp", port, "# SAP System Message Port", true) || changed;        }    }    if (!changed) {        node.revertVersion();    }}Variable node(C:/WINDOWS/system32/drivers/etc/services) should be defined”
    (4)i have uninstalled the entire sneak preview version including the j2ee engine .
    I will be obliged if someone guides me through.
    Thanks and Regards.
    Sundeep Sethi

    Hi,
    Try the installation after starting all the services of the DB. For example if you have used Oracle as the underlying DB, make sure that the important Oracle Services like OracleOraHome92Agent, OracleOraHome92TNSListener and OracleServiceJ2E are in Started status.
    If some other DB, start its services. To start the services go to start - Settings - control Panel - Administrative Tools - Services. 
    Regards,
    Anup.
    Note: If found useful, please contribute points.

  • SAP NetWeaver Sneak Preview: Database Instance Installation

    ERROR 2005-09-04 12:54:31
    FSL-02015  Node C:/Documents/DATA does not exist.
    I get this error while installing SAP NetWeaver Sneak Preview.
    Could anybody help me.
    Thanks
    Ravi K

    Welcome to SDN
    check out the following thread, hopefully it answers your problem
    Cannot install database instance for ABAP version
    Regards
    Raja

Maybe you are looking for