How to upgrade the OS on WCS(Linux)?

I want to upgrade my WCS to RedHat Linux 5.0.  I have burned the iso image to a cd, rebooted the WCS and find nothing happening.  Prior to rebooting, I start a SSH connection to the appliance so I figured that I would see it come up and the upgrade start but then I lose the connection.  Does anyone have any info on upgrading the OS on a WCS?  TIA

Thanks for the reply.  I simply copied the iso to a cd.  during the reboot, I lose my console connection.  So it sounds like I am not burning the cd correctly?

Similar Messages

  • How to upgrade ( touchsmart 610-1130f ) under Linux Operating System: Ubuntu 10.11

    How to upgrade ( touchsmart 610-1130f ) under Linux Operating System: Ubuntu X11
    Unfortunatly didn't do it before erasing Win Se7en.

    I got the answer: If your operating systemt is not listed, we don't have upgrade for you.  If I knew that I woud'nt buy a HP computer.

  • How to upgrade ( touchsmart 610-1130f ) under Linux Operating System: Ubuntu 11.10

    How to upgrade ( touchsmart 610-1130f ) under Linux Operating System: Ubuntu 11.10
    Options 
    How to upgrade ( touchsmart 610-1130f ) under Linux Operating System: Ubuntu X11
    Unfortunatly didn't do it before erasing Win Se7en.

    I got the answer: If your operating systemt is not listed, we don't have upgrade for you.  If I knew that I woud'nt buy a HP computer.

  • How to upgrade the hard disk of the nomad jukebox

    I read the FAQ of nomad on nomadness.net, I wanna know how to upgrade the hard disk of old nomad jukebox with a bigger one?
    I also read a artical on tom's hardware about this,
    http://www7.tomshardware.com/mobile/20000/mp3-3.html
    but he gave a link
    http://www.kuren.org/jukebox
    that is not available. He mentioned that it need to clone the fist 65536 sectors from the old disk to the new one, but I have not the old hard disk( I bought a second hand nomad jukebox without the original hard disk). How should I do?
    Does someone have the image file of the fist 65536 sectors from the old disk?
    Thank you!

    That was the old method before Creative published their Bootcode Flasher software.
    Follow the instructions here:
    http://www.nomadness.net/modules.php...ticle&artid=24
    All files mentioned are available somewhere on Nomadness. Also check out the sticky thread in their JB section of the forum as it lists what hard dri'ves will work in a JB and which ones won't. I hope you haven't already bought your upgrade hard dri've.
    I used the above method without any problems and now have a 20GB JB.
    PB

  • I have a 10.5.8 and would need to know how to upgrade the soft ware to maverick or do I need to buy a new computer

    I have a 10.5.8 and would need to know how to upgrade the soft ware ? . or do I need to buy a new computer. 

    Back up your data, click here, and read the entire page. Mac OS X 10.7 and newer don't support PowerPC software such as Microsoft Office 2004.
    (106103)

  • How to upgrade the version above 10.4 in free

    hello,
    Now the version of my Mac OS X system is 10.3.9. How to upgrade the version above 10.4 in free.
    Thanks very much!

    You can't.
    An upgrade from 10.3.x to 10.4 is a paid upgrade.
    You need to purchase a retail copy of 10.4.

  • HT1414 How to upgrade the firmware on i phone

    Please advise how to upgrade the I Phone 4 ???

    Connect iPhone to syncing computer using USB cable.
    Start iTunes on syncing computer.
    Follow prompts from iTunes to upgrade.

  • [Forum FAQ] How to upgrade the Linux Integration Service

    Symptom
    When you move a Linux guest virtual machine from the legacy system to Windows Server 2012 R2 Hyper-V host, you may face the incompatibility issues. The most common problems are that the mouse pointer maybe a little inaccuracies, the guest VM cannot use the
    dynamic memory.
    Cause
    The cause may be that the integration service not compatible with the Windows Server 2012 R2 Hyper-V host.
    Solution
    We need to upgrade the integration service to at least version 3.5.
    In this demo, we use the CentOS 5.8_x86_x64.
    You can refer to the following steps to perform the upgrading.
    1. Before install the Integration service you can use the following command to check the version of the installed Integration service. (Figure 1)
    #su root
    #/sbin/modinfo hv_vmbus
    Figure 1: check the version of the installed Integration service
    2. Download the Integration Service 3.5 image from here.
    http://www.microsoft.com/en-us/download/details.aspx?id=41554
    3. Insert the Integration Service 3.5 image.
    a. Open Hyper-V Linux guest VM console.
    b. Click-> Media->DVD Drive-> Specific the Integration service image location, insert Disk.
    4. Mount the image.
    If automount is enable, the Integration service image will be mounted automatically. If not, please use the following command to mount the image. (Figure 2)
    #mount /dev/cdrom /media
    Figure 2: Mount the image
    After that, we can see the image content. (Figure 3)
    Figure 3: Imange content
    5. Upgrade the integration service.
    Use the following command locate to the current Linux Distribution Directory. In this example, we select the RHEL58. (Figure 4)
    #cd RHEL58
    #./upgraee.sh
    Figure 4: Locate the Linux Distribution Directory
    When you see the message, "Linux Integration Service for Hyper-V has been upgraded. Please reboot your system", it means the upgrading is finished.
    6. Reboot your Linux system. (Figure 5)
    Figure 5: Reboot the system
    7. Confirm the upgrading.
    After Linux boots up, use the following command to check if the upgrading is succeed. (Figure 6)
    #/sbin/modinfo hv_vmbus
    Figure 6: Verify the upgrading.
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    May be you should write a WIKI article on same.

  • How to install the package in ubuntu(linux)?

    I'd downloaded a new version of Firefox 5 for Ubuntu(Linux).
    But I'm unable to upgrade the previous version of Firefox or how to use the new one which I'd downloaded.

    https://support.mozilla.com/en-US/kb/Installing+Firefox+on+Linux
    https://help.ubuntu.com/community/FirefoxNewVersion/MozillaBuilds

  • How to upgrade the Oracle Client silently ?

    Hi all,
    I have to upgrade the Oracle Client from 8.1.6.0.0 to 9.2.0.1.0.
    I use the -record option for creating the destination file or edit the response file manually for being able to install the new client. But I have no idea, how to remove the old client.
    The following command doesn't work:
    C:\Program Files\Oracle\oui\install\setup.exe" -deinstall DEINSTALL_LIST={"oracle.client","8.1.6.0.0"}
    What am I doing wrong? How to remove the Oracle Client silently?
    Thanks for the help and best wishes from Frankfurt.
    Dimitri

    I created a instant client silent DE-INSTALL for version 10.1.0.2 on XP.
    setup.exe -silent -deinstall -responseFile Z:\yyyyyy\xxxxxx.rsp
    These are parameters are in my response file...
    ORACLE_HOME="C:\oracle\InstantClient\10.1.0"
    ORACLE_HOME_NAME="OraInstantClient10g_home1"
    TOPLEVEL_COMPONENT={"oracle.client","10.1.0.2.0"}
    DEINSTALL_LIST={"oracle.client","10.1.0.2.0"}
    SHOW_SPLASH_SCREEN=false
    SHOW_WELCOME_PAGE=false
    SHOW_END_SESSION_PAGE=false
    SHOW_EXIT_CONFIRMATION=false
    SHOW_DEINSTALL_CONFIRMATION=false
    SHOW_DEINSTALL_PROGRESS=true
    REMOVE_HOMES={"c:\oracle\ora81","c:\oracle\InstantClient\10.1.0"}
    You still have to manually update/remove the PATH & TNS_ADMIN environment variables and the file system directories.

  • How to run the oracle form in linux system

    Hello all,
    My config is :-
    Forms [32 Bit] Version 10.1.2.0.2 (Production)
    Oracle Database 11g Release 11.2.0.1.0 - 64bit Production
    I can easily run my on Windows and Linux platform untill i am not use java bean in my form. After using the getMacaddress JAVA BEAN. I am not able to run my form on linux platform. If i remove the java bean from my form than form will run on linux.
    I am not familiar with linux so i am not able to trace the problem basicaly i don't  know which version of jre is used by linux system and i don't know how to find it.
    Please guide me.

    Now i install the jdk 1.6.0_20 and add into the jdeveloper 10.1.3.
    and i change my code for get mac id is -
    package demo;
    import java.net.InetAddress;
    import java.net.NetworkInterface;
    import java.net.SocketException;
    import java.net.UnknownHostException;
    public class App{
       public static void main(String[] args){
    InetAddress ip;
    try {
    ip = InetAddress.getLocalHost();
    System.out.println("Current IP address : " + ip.getHostAddress());
    NetworkInterface network = NetworkInterface.getByInetAddress(ip);
    byte[] mac = network.getHardwareAddress();
    System.out.print("Current MAC address : ");
    StringBuilder sb = new StringBuilder();
    for (int i = 0; i < mac.length; i++) {
    sb.append(String.format("%02X%s", mac[i], (i < mac.length - 1) ? "-" : ""));
    System.out.println(sb.toString());
    } catch (UnknownHostException e) {
    e.printStackTrace();
    } catch (SocketException e){
    e.printStackTrace();
    in form i create one jave bean area and add the implement class is
    demo.get_info.
    and on B1 (button) when-button-pressed
    :T1 :=GET_CUSTOM_PROPERTY('BEAN_MAC',1,'get_info');
    No error comes and no out put comes. So please guide me how to use the getHardwareAddress to get mac id.

  • How to upgrade the Admin Server to WLS 9.2.3 while Managed on 9.2.2

    HI,
    I have a WLS 9.2.2 domain with Admin and 2 Managed instances clustered. Admin and Managed Servers are on different machines.
    I want to upgrade only the Admin Server to WLS 9.2 MP3 while all my Managed Servers are in WLS 9.2 MP2.
    Can any one provide me the detailed steps on how to upgrade only the Admin server to WLS 9.2 MP3?
    And I read in the Weblogic documentation that this supported. But could not find any detailed steps on how to upgrade only the Admin server to the Major version.
    Thanks in Advance.

    Hi
    1. "And I read in the Weblogic documentation that this supported". Can you please provide the link or documenation that exactly says that this is Supported ???
    2. As far as I know, one of the basic requirements for Weblogic Cluster with managed servers across different remote machines is, all the machines, Admin and Managed Servers machines should have Exact Same Version (including Service Pack) of WLS deployed. Right now I do not have this link on top of my head. But this is the only Supported and one basic requirement for Weblogic Cluster.
    Since WLS uses all Shared Modules and each Shared module do have like Implementation and Specification Version. If you upgrade admin server domain, most probably config.xml file will be upgraded with all modules version as 10.0.2.3 (something like that). This means when you restart Managed Servers, they will get a new copy of config.xml file from admin server machine. So now on Managed Servers all these modules (10.0.2.3 etc) should exist on their local machines. This is just my thought.
    Thanks
    Ravi Jegga

  • How to upgrade the memory on Portege M400?

    My new M400 has come with 512Mb of RAM. According to kingston.com it can be expanded to 2Gb. I can see how to replace the HDD, but not the memory.
    Is it under the keyboard?
    Many Thanks.

    Hi
    The memory slots you will find under the keyboard.
    Before you will start the upgrade procedure you should shut down the notebook and remove the AC adapter cable and the battery.
    1.) Slip you finger under a notch at the end of the keyboard brace and lift up to relase latches and remove the keyboard brace.
    2.) Remove the two screws securing the keyboard
    3.) Lift up the back of the keyboard, rotate it toward you and lay in face down on the palm rest. (do not touch the keys)
    4.) Remove two screws and take off the memory module cover.
    5.) Fit the memory modules connectors into the socket at about 45 degree angle and push down until latches on either side snap into place. Align thenotch of the memory modules with that of the memory slot and gently insert the module into the slot.

  • How to push the config from WCS to WLC

    Hi Everyone
    sorry a total noob here. I had to reset factory my WLC. how can I download the config from WCS? Cisco Prime? I have the config backed up there but I cant see an option to push the config
    thanks alot

    If the device is already in the Prime Infrastructure, you can open it in Device work center and select the device > use the configuration archive option > scheduled deploy.
    Also, the Prime Infrastructure Plug and Play feature allows you to perform an initial provisioning of a software image and configuration on a new device. For more details check :
    Automating Device Deployment Using Plug and Play Profiles
    Working with Device Configurations
    -Thanks
    Vinod

  • How can upgrade the support pack?

    hi all
    I was download some file as *.SAR
    but I don;t know how can I upgrade it?
    and how can I check the version in my SAP and what impact info after upgrade the new support package? (e.g. in web..etc.)
    thanks very much
    Regards
    Kevin

    Hi Kevin,
    This will help.
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCUPGOCSSPAM/BCUPGOCSSPAM.pdf
    http://help.sap.com/saphelp_nw04/helpdata/en/83/7a18ecde6e11d195460000e82de14a/frameset.htm
    http://www.saptechies.com/sap-patch-manager-spam-bcupgocs/
    Regards
    Ashok Dalai

Maybe you are looking for