How to upgrade the spa122 firwmare to 1.2.1(004) using configurtion file

Hello,
Highly appreciate if anyone can let me know how to define the upgrade rule in configruation file to upgrade the firmware to 1.2.1(004) -
is it ok if I define it in upgrade rule as below
<Upgrade_Rule> (!1.2.1(004))?http://10.1.1.1/SPA112_SPA122_1.2.1_FW.bin </Upgrade_Rule>
if not, what is the correct one
Regards,
Denning

Yes, it's old legacy syntax. The recommended syntax is:
...Rule> ($SWVER != 1.2.1(004))?http ...
Unfortunately, such type of conditional doesn't work reliable most times for me (althougth I didn't tested the particular one from your example).
I don't know why.
I suspect, that firmware numbers like 7.4.9c or 7.5.2b may be source of problem - Cisco's Provisioning guide claim that version numbers take form of three non-negative numbers separated by periods followed by optional alphanuberic string in parthenses. It's not true for some released versions. May be, the comparsion logic doesn't handle those broken version numbers correctly.

Similar Messages

How to store the data instead of memoryengine to database when use XML file

Hi Experts,
I have doubt which is into XML to database data transfer.
While transferring the data from XML to database the tables will be store in memory for the xml files, my aim is instead of storing this in memory engine
is there any way to store the data in to the data base itself..
I am assuming when the data size increases say for example huge amount data, storing this much of data is big issue here right, so to avoid this is there any way to store
this data directly in the database level.
Please understand my requirement or else I have the good explanation about my requirement and please assist me how do this job....
Thx,
Sahadeva.

Hi Experts,
For this job I have applied the
jdbc:snps:xmll?f=/mydata/xml/file.xml&s=wrk_admin&dp_driver=oracle.jdbc.driver.OracleDriver&dp_url=jdbc:oracle:thin:@localhost:1521:xel&dp_user=wrk_admin&dp_password=bPyXS2eRXw8fWnKEmTYSEf&dp_schema=wrk_admin&dp_doc=Y
my schema name is wrk_admin
xml file name is mydata
jdbc driver: localhost:1521:xe
Encoded password: I have encoded the pwd from cmd:c:oracle\oracle_odi1\oracledi\agent\bin\encode wrk_admin
The above are the details I have applied to my ODI studio for creating the dataserver.
After applying this I got the following error.
Could you please correct me here if I am wrong...
jdbc:snps:xml?param1=value1&param2=value2&...
     at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.doGetConnection(LoginTimeoutDatasourceAdapter.java:133)
     at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.getConnection(LoginTimeoutDatasourceAdapter.java:62)
     at com.sunopsis.sql.SnpsConnection.testConnection(SnpsConnection.java:1118)
     at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.getLocalConnect(SnpsDialogTestConnet.java:420)
     at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.localConnect(SnpsDialogTestConnet.java:860)
     at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.jButtonTest_ActionPerformed(SnpsDialogTestConnet.java:806)
     at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.connEtoC1(SnpsDialogTestConnet.java:165)
     at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.access$1(SnpsDialogTestConnet.java:161)
Thx,
Sahadeva.

How to get the erroe message, if i run java program using .bat file

Hi,
I have a java file which accepts two inputs as command line argument. I want to make this pgm a tool. So have created a *.bat file which has the following command
java myprogram arg1 arg2
I'm gonna share this program with others. So i'll keep the class file and the .bat file in a commaon folder. All the users have to do is, edit the .bat file to give his/her args and run the .bat file. The pbm is, if the user input is not valid, I have put displays in the pgm to show it.
But if i run thru .bat, I'm not getting the error message or I don't know where it is getting displayed.
Can anyone help me with this ?
Thanks,
Mary

When i run from the console, I can see the output.
But, when i double click on the .bat file from the
folder, it runs fine and i couldn't see the output.
nullThat's because the error message is printed, and then the console is closed. The message is there but you need to read really really fast :)

Hi All.. i want to use my iphone 4 to play poker on facebook with the zynga.. idont know the apps name,, thank's for ur help, and how to upgrade ios 4.3.3, now i'm still using ios 4.1.1, thank's

hi All.. i want to use my iphone 4 to play poker on facebook with the zynga.. idont know the apps name,, thank's for ur help, and how to upgrade ios 4.3.3, now i'm still using ios 4.1.1, thank's

when you connect your phone with your computer and use itunes you can click on the phone
and click on an update button
about facebook games then think they are all flash based and iphones cant do flash so thats not possible

How to upgrade the hard disk of the nomad jukebox

I read the FAQ of nomad on nomadness.net, I wanna know how to upgrade the hard disk of old nomad jukebox with a bigger one?
I also read a artical on tom's hardware about this,
http://www7.tomshardware.com/mobile/20000/mp3-3.html
but he gave a link
http://www.kuren.org/jukebox
that is not available. He mentioned that it need to clone the fist 65536 sectors from the old disk to the new one, but I have not the old hard disk( I bought a second hand nomad jukebox without the original hard disk). How should I do?
Does someone have the image file of the fist 65536 sectors from the old disk?
Thank you!

That was the old method before Creative published their Bootcode Flasher software.
Follow the instructions here:
http://www.nomadness.net/modules.php...ticle&artid=24
All files mentioned are available somewhere on Nomadness. Also check out the sticky thread in their JB section of the forum as it lists what hard dri'ves will work in a JB and which ones won't. I hope you haven't already bought your upgrade hard dri've.
I used the above method without any problems and now have a 20GB JB.
PB

I have a 10.5.8 and would need to know how to upgrade the soft ware to maverick or do I need to buy a new computer

I have a 10.5.8 and would need to know how to upgrade the soft ware ? . or do I need to buy a new computer.

Back up your data, click here, and read the entire page. Mac OS X 10.7 and newer don't support PowerPC software such as Microsoft Office 2004.
(106103)

How to upgrade the version above 10.4 in free

hello,
Now the version of my Mac OS X system is 10.3.9. How to upgrade the version above 10.4 in free.
Thanks very much!

You can't.
An upgrade from 10.3.x to 10.4 is a paid upgrade.
You need to purchase a retail copy of 10.4.

HT1414 How to upgrade the firmware on i phone

Please advise how to upgrade the I Phone 4 ???

Connect iPhone to syncing computer using USB cable.
Start iTunes on syncing computer.
Follow prompts from iTunes to upgrade.

I have a MacBookPro5,1 using OSX 10.6.8 can I upgrade the OSX to 10.7 in order to use Norton Multi-Device?

I have a MacBookPro5,1 using OSX 10.6.8 can I upgrade the OSX to 10.7 in order to use Norton Multi-Device?

You can upgrade to Lion or Mountain Lion.
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s MobileMe service; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer)
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
        3. MacBook Pro (Mid/Late 2007 or newer)
         4. MacBook Air (Late 2008 or newer)
         5. Mac mini (Early 2009 or newer)
         6. Mac Pro (Early 2008 or newer)
         7. Xserve (Early 2009)
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

How to find the list of existing tables in a schema using DB link?

Hi
I know how to find the list of existing tables in a schema using the following query
SQL> select * from tab;
but, how to list the tables using a DB link?
For Example
SQL> select * from tab@dblink_name;
why this doesn't work?
Pl advice me
Thanks
Reddy.

ORA-02019: connection description for remote database not foundHave you used this database link successfully for some other queries?
The error posted seems to indicate that the DB Link is not functional at all. Has it worked for any other type of DML operation or is this the first time you ever tried to use the link?

How to get the query result of improvement (Before and After ) using sql de

how to get the query result of improvement (Before and After ) using sql developer.

Check
http://www.oracle.com/technetwork/articles/sql/exploring-sql-developer-1637307.html

How to get the password of a password protected Excel Sheet using java/jxl

Hi ,
how to get the password of a password protected Excel Sheet using java / jxl program.
plz any one help me .
Ramesh P
[email protected]

If they've implemented the password system correctly there probably isn't a way of getting the password at all.

How to take the screen shot of my computer page by using Labview.... is there any funtions available in Labview?

How to take the screen shot of my computer page by using Labview.... is there any funtions available in Labview?

Another thread about this theme.
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

How to list the contents of an OSX directory, and output to text file?

hello there any hints with any known program that does following
I have recorded my music directory to DVD and now i would like to make an .txt file what the dvd contains...cos its way of hand to write all 100xx files by hand...
How to list the contents of an OSX directory, and output to text file?
any prog that does that? any hints?
best regards

This script makes a hierarchical file listing all files in a folder and subfolder:
Click here to launch Script Editor.
choose folder with prompt "Choose a folder to process..." returning theFolder
set theName to name of (info for theFolder)
set thepath to quoted form of POSIX path of theFolder
set currentIndex to theFolder as string
do shell script "ls -R " & thepath returning theDir
set theDirList to every paragraph of theDir
set newList to {"Contents of folder \"" & theName & "\"" & return & thepath & return & return}
set theFilePrefix to ""
repeat with i from 1 to count of theDirList
set theLine to item i of theDirList
set my text item delimiters to "/"
set theMarker to count of text items of thepath
set theCount to count of text items of theLine
set currentFolder to text item -1 of theLine
set theFolderPrefix to ""
if theCount is greater than theMarker then
set theNestIndex to theCount - theMarker
set theTally to -1
set theFilePrefix to ""
set theSuffix to ""
repeat theNestIndex times
set theFolderPrefix to theFolderPrefix & tab
set theFilePrefix to theFilePrefix & tab
if theTally is -1 then
set theSuffix to text item theTally of theLine & theSuffix
else
set theSuffix to text item theTally of theLine & ":" & theSuffix
end if
set currentIndex to "" & theFolder & theSuffix
set theTally to theTally - 1
end repeat
end if
set my text item delimiters to ""
if theLine is not "" then
if word 1 of theLine is "Volumes" then
set end of newList to theFolderPrefix & "Folder: > " & currentFolder & return
else
try
if not folder of (info for alias (currentIndex & theLine & ":")) then
set end of newList to theFilePrefix & tab & tab & tab & "> " & theLine & return
end if
end try
end if
end if
end repeat
open for access file ((path to desktop as string) & "Contents of folder- " & theName & ".txt") ¬
with write permission returning theFile
write (newList as string) to theFile
close access theFile

How to test the SAP modules like SD and MM By using Quality Center and QTP

Hi Experts,
How to test the SAP modules like SD and MM By using Quality Center and QTP. Can you please provide the documentation regarding this.
Regards,
Skumar.

Hi Sampath,
First install QTP and SAP Addin with in QTP.
2nd use QC to develop the test plan and then convert that test plan design to Test Scripts (QTP vesrion using settings)
3rd record the R/3 GUI screen of SAP for SD, MM like Create order or Create PR.
Once recording is done QTP will create a script in VB
SAPGuiSession("Session").SAPGuiWindow("SAP Easy Access - User").SAPGuiOKCode("OKCode").Set "/nVA01"
SAPGuiSession("Session").SAPGuiWindow("SAP Easy Access - User").SendKey ENTER
you can always add a parameter and other customization according to your requirement.
Let me know if you need more information regarding this.
Good Luck!

How to upgrade the spa122 firwmare to 1.2.1(004) using configurtion file

Similar Messages

Maybe you are looking for