How to upgrade the update level from update 6 to update 8 or latest
Hello Team,
I need to upgrade the level of update on solaris 10 .Please find my /etc/relase output.
cat /etc/release
Solaris 10 10/08 s10x_u6wos_07b X86
Copyright 2008 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 27 October 2008
I need to update from u6 to u8 or latest ,Please give me the suggestion at earliest. My system in x86.
Thanks In Advance.
Regads,
Rajanayagam.
It exists two methods to upgrade the system. The first one is to boot from an installation media or from a jumpstart server and if the installer can do an upgrade, then it will display the "upgrade" option. The second option is a method named Live Upgrade.
Both methods are described in the page : Upgrade Planning - Oracle Solaris 10 1/13 Installation Guide: Planning for Installation and Upgrade
Similar Messages
-
How to upgrade the fwsm image from 3.1(10) to 4.0(8).
Hi all,
I need to upgrade the fwsm image from 3.1(10) to 4.0(8). Can i do it directly from 3.1(10) to 4.0(8) ?
Do i need to upgrade other image also along with Firewall version 4.0(8)?
FWSM# sh ver
FWSM Firewall Version 3.1(10)
Device Manager Version 6.1(5)F
Compiled on Mon 21-Apr-08 17:43 by fwsmbld
FWSM up 2 days 15 hours
failover cluster up 2 days 15 hours
Hardware: WS-SVC-FWM-1, 1024 MB RAM, CPU Pentium III 1000 MHz
Flash STI Flash 8.0.0 @ 0xc321, 20MB
0: Int: Not licensed : irq 5
1: Int: Not licensed : irq 7
2: Int: Not licensed : irq 11
The Running Activation Key is not set, using default settings:
Licensed features for this platform:
Maximum Interfaces : 256
Inside Hosts : Unlimited
Failover : Active/Active
VPN-DES : Enabled
VPN-3DES-AES : Enabled
Cut-through Proxy : Enabled
Guards : Enabled
URL Filtering : Enabled
Security Contexts : 2
GTP/GPRS : Disabled
VPN Peers : Unlimited
Serial Number: SAD125004FT
Running Activation Key: 0x00000000 0x00000000 0x00000000 0x00000000
Configuration last modified by enable_15 at 18:58:52.627 IST Mon Jan
11
2010
Regards
MadhuApplication partitiion is what you will be upgrading from 3.1.(10 to 4.0(8).
MP - maintenance partition is supposed to be 2.1.2 or above which is the same requirement for 3.1.x so, you will be good there.
Pls. check the compatibility with the swtich code in this 4.0.8 Release Note link:
http://www.cisco.com/en/US/docs/security/fwsm/fwsm40/release/notes/fwsmrn40.html
Pls. check the chassis system requirement in the above link.
commands you will need are:
copy tftp flash:image
copy tftp flash:asdm
falsh:image for OS and flash:asdm if you will be upgrading the asdm as well.
-KS -
How to upgrade to LR CC from LR5.7...When I click on check for updates, dialog box says I have the latest/
The creative cloud dialog box that lists the applications, doesn't show LRCCLog out of the CC desktop app, then log back in again. You should see it then.
-
How do I keep my installer from trying to update with Photoshop instead of installer? Quark can't update because the installer opens Photoshop which doesn't recognize the file and I'm not given the option to choose anything else.
1. Sync wasn't intended to be used in that manner. You would be better off carrying around a USB Flash Stick with Portable Firefox for use on "strange" PC's.
2. You could open the "Library" {Ctrl + Shift + B} and highlight all those bookmarks and then delete them all at once. But that would also delete all the other bookmarks, and it isn't foolproof. All another person would need to do it to '''''restore''''' a bookmark backup file that has your bookmarks. Beyond that, a new Profile could be created and then the current Profile deleted; but that's "messing with" someone else's computer - an action that is worthy of terminating a friendship over, IMO.
And if that "public" computer was set up properly, Sync should have been disabled. -
I did not authorize 2 in app purchases and because my credit card is at its limit, and i dont know how to reverse the in app purchases, i cannot update any app or do just about anything in the appstore or itunes store. I dont care if i owe apple's itunes appstore a few dollars over 2 in app purchases i never meant to download in fact the whole app itself i wanted to delete...but out of the hundreds (maybe lower thousands) fof dollars in music and apps and whatever else, that i rightfully purchased over the passed couple of years....should *NOT* have the upgrades and/or previous purchased songs withheld from me over $3 in accidently purchased add ons through an existing app i deleted an disliked anyway
Same thing happened to me with my peruvian credit card in the peruvian app store, I want to buy an app, but it says that my credit card is "not supported in the Peruvian app store"
-
How far dose the first generation's iPad iOS updates go?
I cannot download some of the new apps because my iPad has to have the latest iOS.
When I go to download the latest iOS it states that I have the latest version.
So , my question is : How far dose the first generation's iPad iOS updates go?
How can I upgrade to the very latest iOS?
I also get knocked off from websites a lot.
Thanks in Advance.5.1.1.
(103242) -
How can I stop my Apps from being automatically updated on my iPad2?
How can I stopy my Apps from being automatically updated on my iPad2? I have an extremely slow wi-fi at work and my iPad Apps appear to be frozen as they are waiting to be updated. Help!
In iTunes use the File menu "Transfer purchases from..." item. Ordinarily you will get a warning to do this before an update. Presumably your computer is authorized to use your account and it is the computer to which you normally sync your iPod?
-
I just upgrade the OS X from 10.9.1 to 10.9.2. After upgrade, the help file is not available. How can I get it back?
Look above at my original post:
Downgrade Mavericks to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer
loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the
Utilities menu.
2. After DU loads select your hard drive (this is the entry with the
mfgr.'s ID and size) from the left side list. Note the SMART status
of the drive in DU's status area. If it does not say "Verified" then
the drive is failing or has failed and will need replacing. SMART
info will not be reported on external drives. Otherwise, click on
the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions
from the drop down menu to one. Set the format type to Mac OS
Extended (Journaled.) Click on the Options button, set the
partition scheme to GUID then click on the OK button. Click on
the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner.
If you have Snow Leopard Time Machine backups made while on Snow Leopard, then you may do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion/Mountain Lion files. -
Hi!
I have tried to update OS from 4.3.5 to latest on Ipod touch but every time after 70% completing an error is prompted and say update cannot be completed. Please check the setting. Please guide in this respect to be updated.Disable the computer's firewall and antivirus during the download and update.
-
How to access the contact list before i had updated.
how to access the contact list before i had updated IOS7.
My contact list has gone now....I am not sure about the syncing problem, i just use my apple ID.....
what should i do, if i didn't do the syncing step:( -
How to delete the duplicate data from PSA Table
Dear All,
How to delete the duplicate data from PSA Table, I have the purchase cube and I am getting the data from Item data source.
In PSA table, I found the some cancellation records for that particular records quantity would be negative for the same record value would be positive.
Due to this reason the quantity is updated to target but the values would summarized and got the summarized value of all normal and cancellation .
Please let me know the solution how to delete the data while updating to the target.
Thanks
Regards,
SaiHi,
in deleting the records in PSA table difficult and how many you will the delete.
you can achieve the different ways.
1. creating the DSO maintain the some key fields it will overwrite the based on key fields.
2. you can write the ABAP logic deleting the duplicate records at info package level check with the your ABAPer.
3.you can restrict the cancellation records at query level.
Thanks,
Phani. -
How to upgrade the Oracle Client silently ?
Hi all,
I have to upgrade the Oracle Client from 8.1.6.0.0 to 9.2.0.1.0.
I use the -record option for creating the destination file or edit the response file manually for being able to install the new client. But I have no idea, how to remove the old client.
The following command doesn't work:
C:\Program Files\Oracle\oui\install\setup.exe" -deinstall DEINSTALL_LIST={"oracle.client","8.1.6.0.0"}
What am I doing wrong? How to remove the Oracle Client silently?
Thanks for the help and best wishes from Frankfurt.
DimitriI created a instant client silent DE-INSTALL for version 10.1.0.2 on XP.
setup.exe -silent -deinstall -responseFile Z:\yyyyyy\xxxxxx.rsp
These are parameters are in my response file...
ORACLE_HOME="C:\oracle\InstantClient\10.1.0"
ORACLE_HOME_NAME="OraInstantClient10g_home1"
TOPLEVEL_COMPONENT={"oracle.client","10.1.0.2.0"}
DEINSTALL_LIST={"oracle.client","10.1.0.2.0"}
SHOW_SPLASH_SCREEN=false
SHOW_WELCOME_PAGE=false
SHOW_END_SESSION_PAGE=false
SHOW_EXIT_CONFIRMATION=false
SHOW_DEINSTALL_CONFIRMATION=false
SHOW_DEINSTALL_PROGRESS=true
REMOVE_HOMES={"c:\oracle\ora81","c:\oracle\InstantClient\10.1.0"}
You still have to manually update/remove the PATH & TNS_ADMIN environment variables and the file system directories. -
How to change the source level in java Studio creator
Hi,
I am using Sun Java Studio Creator 2 Update 1 IDE, in this IDE how to change the source level to 1.5 for an existing project.
Thanks in advance,
Rajesh.Hi!
Unfortunately Sun Java Studio Creator 2 Update 1 doesn't support 1.5 source level. But You can try to download NetBeans IDE (from http://www.netbeans.org) and there with Visual Web project You will find the same functionality as for Creator. And 1.5 source level is supported by NetBeans.
Thanks,
Roman. -
How to find the CPU utilization from the portal front end
HI Guys,
I want to find the CPU utilization from the portal front end browser screen.Can you please let me know how to find this and also the path to find it.
And how to find the CPU utilization from the server.What is the command to find the CPU utilization at unix level.
Regards,
Krishnam.hi you can create transient field in view object indicate to visibility of row (boolean ) and create view criteria that show only rows that are able to be visible according to transient attribute and at the update process set the attribute to true inside entityImpl class
-
How to find the data loaded from r/3 to bw
hi
how to find the data loaded from r/3 to bw is correct . i am not able to find which feild in the query is connected to which feild in the r/3 . where i am geting the data from r/3 . is there any process to find which feild and table the data is comming from . plz help
thanks in advance to u allHi Veda ... the mapping between R/3 fields and BW InfoObjects should take place in Transfer Rules. Other transformation could take place in Update Rule.
So you could proceed this way: look at InfoProvider Data Model and see if the Query does perform any calculation (even with Virtual keyfigures / chars). Than go back to Update Rules and search for other calculation / transformation. At least there are Tranfer Rule and eventually DataSource / Extraction Enhancements.
As you can easily get there are many points where you have to look for ... it's a quite complex work but very usefull.
Once you will have identified all mappings / transfromation see if BW data matchs R/3 (considering calculations ...)
Good job
GFV -
How to stop the gray wheel from spinning after logging out
how to stop the gray wheel from spinning after logging out?
Frank ...
Make sure to quit all open applications before logging out.
Your proflie indicates your Mac has v10.7.1 installed.
If that is the case, updating your system software will help as far as functionaly as well as security.
Install the OS X Lion Update 10.7.5 (Client Combo)
Then restart your Mac.
message edited by: cs
Maybe you are looking for
-
So I recenly got a new rMBP and have begun using the Mail app. I've had a bunch of problems with Gmail and the app but my my biggest gripe is that it seems to have downloaded over 2,000 messages from the server (of which I have no idea where its gett
-
How to pass CSOM Authentication in sharepoint
Hi every one, I want to read/insert the data from the list even thought the user don't have the permission on list. But programmatically i want to read/insert data throught the CSOM in Managed Code(in .CS page) which is similar functionality of SOM
-
Advice on small gigabit network for students
Hi Guys (and ladies) I am about to start planning a small network of macs for use by a local college. There are only 20 students. I plan to have a Mac Pro for server and 5 networked clients for use by the students. There will also be another client i
-
I was trying to find ways to backup both my Windows computer and iMac on the same harddrive, and so far, I haven't had much luck. I have an iPod mini, but it's not big enough. It doesn't give me the option to write to cd's because they're not big eno
-
Issues in retrieving the Planning profiles in CRM from BW while doing CRM-BI Integration
Dear Folks, We are in the process of doing the SAP CRM & BI Integration wrt Trade Promotion Mangement. For testing purposes, we tried to create a planning profile in BPS end i.e BW SEM system & trying to retrieve it from the CRM system using the belo