How to upgrade to lightroom 5 from lightroom 4

I have had lightroom for awhile and would like to know how to update to lightroom 5 and how much it will cost

The upgrade is 79 US dollars from Adobe at https://www.adobe.com/products/catalog/software._sl_id-contentfilter_sl_catalog_sl_softwar e_sl_mostpopular.html?promoid=KLXMI
Just download and install and use!

Similar Messages

  • How to upgrade to OS lion from a doggle

    how to upgrade to OS lion from a doggle

    Kappy wrote:
    What's a "doggle?"
    It's a box like device on the end of a short USB or Ethernet cable usually designed for copy protection purposes for software.
    The original Quark X Press came with one, we used to mess with co-workers by pulling it out slightly so it didn't make contact.
    Edit: Ah, looks like the terminology has changed
    The term "dongle" was originally used to refer only to software-protection dongles; however, currently "dongle" is often used to refer to any small piece of hardware that plugs into a computer.
    Followed by a picture of what appears to be a USB looking thumb type drive, but it's likely not if it's got electronics inside to provide copy protection.
    https://en.wikipedia.org/wiki/Software_protection_dongle
    Lion of course doesn't come on a dongle, it comes on a USB thumb drive. But the method is to hold the option key down and select it to boot from and then run the installer.
    OP should backup all data off the machine first before proceeding with their Lion's dongle. LOL

  • How to upgrade to LR CC from LR5.7...When I click on check for updates, dialog box says I have the latest

    How to upgrade to LR CC from LR5.7...When I click on check for updates, dialog box says I have the latest/
    The creative cloud dialog box that lists the applications, doesn't show LRCC

    Log out of the CC desktop app, then log back in again. You should see it then.

  • How to upgrade a Lightroom 4 catalog to LR5?

    I have two separate Lightroom catalogs associated with my Mac laptop computer, both of which are stored on separate external hard drives.  One external hard drive catalog is operating on LR5 but the other external hard drive catalog is still operating on LR4.  The Lightroom 5 download went smoothly on the first LR catalog but I am unable to figure out how to apply the downloaded LR 5 onto the other LR4 catalog.  Can anyone explain how to upgrade the second LR4 catalog to LR5?
    Not sure if this is important to note but I purchased LR5 on my laptop.  In addition to my laptop LR5 is also now working on my desktop computer.  Both computers are Macs. Only two computers are associated with Lightroom. 

    Thank you, JimHess for your help.  That was deceptively easy.  I spent two hours trying to find someone at Adobe to help this newbie (me) with this but you answered my question very well.  Greatly appreciated.
    One more query, if you will.  Now that both my Lightroom catalogs have been upgraded to LR5, will I screw anything up if I delete the LR4 catalog?  I apologize for asking what may be such a dumb question but I don't want to lose valuable photos and memories.  Thanks again!

  • Can anybody tell me how to upgrade my iphone 4 from 4.2.1

    can anybody tell me how to upgrade my iphone from 4.2.1

    Connect your iPhone to the computer with which you normally sync and
    use iTunes to update to iOS 6. Future updates can be done over the air
    using only a wifi connection.

  • Help! Need advice on how to upgrade to Windows 7 from Windows 7 Evaluation Copy: Build 7100

    I am on an HP Pavillion Media Center m8200m PC.  The computer came with Vista on it and did not come with any Vista operating system installation discs when I bought it.  I did make a set of two system recovery discs from this original Vista operating system,  About 3 months ago, I decided to put on an evaluation copy of Windows 7 (Build 7100).  In order to do this, I had to remove Vista completely from my computer and then install the the Windows 7 evaluation download from Microsoft.  It has worked fine since, but will expire shortly.  I now want to put on a permanent installation of Windows 7, but am unsure how to do this.  Can someone please explain the procedure to me.  I have read that I cannot upgrade to anything directly from the Windows 7 evaluation copy.  Do I need to recover the computer and install Vista from the recovery discs  (providing I can reinstall Vista from these recovery discs), then upgrade to a permanent version of Windows 7 (from a less expensive Windows 7 upgrade).  Or, will I have to buy a full version of Windows 7 and start from scratch?  Also, is there a way to retain all my data on this computer during this new installation of Windows 7, or will I lose averything including programs, data, etc. and have to reinstall it once I have the new permanent operating system on the computer?  
    I'm usually pretty good with this stuff, but can't seem to get a straight answer.  I want to do this as soon as possible, so would greatly appreciate a straight, clear explanation of what to do.  I would truly appreciate it.

    It is possible to upgrade the evaluation version to the RTM version with some fiddling as shown here.  It would be better to do a clean install.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • How to upgrade 10.2.04 from 10.2.0.0

    hi
    EBS R12 RUP 6
    DB 10.2.0.0
    OS RHEL 5.5
    how to upgrade 10.2.0.4 from 10.2.0.0??
    what short of patch and script to download from metalink for this process??
    what Critical PU is required for this?
    rgrds

    hsawwan wrote:
    Hi,
    Where you got this query from? What is your reference?
    Thanks,
    Hussein
    For full overview please see OracleMetaLink document 553812.1 "Actions for the DSTv4 update in the 10.2.0.4 patchset".
    1.
    When patching from a lower 10.2 release or upgrading from 10.1.0.X directly to 10.2.0.4, check the current version of the Oracle time zone definitions with the following command:
    SELECT version FROM v$timezone_file;
    readme 6810189
    do i need to update tz?and then this upgradation?
    Edited by: new2appsdba on Aug 14, 2010 2:24 AM

  • How to upgrade to Linux kernel from 2.6.37?

    How to upgrade to Linux kernel 3 from 2.6.37?
    pacman -Su won't go further.
    Last edited by Ariya (2011-09-25 18:41:38)

    This is what I get;
    pacman -S linux
    resolving dependencies...
    looking for inter-conflicts...
    :: linux and kernel26 are in conflict. Remove kernel26? [y/N] y
    error: failed to prepare transaction (could not satisfy dependencies)
    :: aufs2: requires kernel26>=2.6.37.3
    :: aufs2: requires kernel26<2.6.38
    :: ndiswrapper: requires kernel26>=2.6.37
    :: ndiswrapper: requires kernel26<2.6.38
    I have up to date mirrorlist
    Pacman -Syyu gives after while
    resolving dependencies...
    looking for inter-conflicts...
    error: failed to prepare transaction (could not satisfy dependencies)
    :: aufs2: requires kernel26>=2.6.37.3
    :: aufs2: requires kernel26<2.6.38
    Last edited by Ariya (2011-09-25 19:28:03)

  • How to upgrade the fwsm image from 3.1(10) to 4.0(8).

    Hi all,
    I need to upgrade the fwsm image from 3.1(10) to 4.0(8). Can i do it directly from 3.1(10) to 4.0(8) ?
    Do i need to upgrade other image also along with Firewall version 4.0(8)?
    FWSM# sh ver
    FWSM Firewall Version 3.1(10)
    Device Manager Version 6.1(5)F
    Compiled on Mon 21-Apr-08 17:43 by fwsmbld
    FWSM up 2 days 15 hours
    failover cluster up 2 days 15 hours
    Hardware: WS-SVC-FWM-1, 1024 MB RAM, CPU Pentium III 1000 MHz
    Flash STI Flash 8.0.0 @ 0xc321, 20MB
    0: Int: Not licensed : irq 5
    1: Int: Not licensed : irq 7
    2: Int: Not licensed : irq 11
    The Running Activation Key is not set, using default settings:
    Licensed features for this platform:
    Maximum Interfaces : 256
    Inside Hosts : Unlimited
    Failover : Active/Active
    VPN-DES : Enabled
    VPN-3DES-AES : Enabled
    Cut-through Proxy : Enabled
    Guards : Enabled
    URL Filtering : Enabled
    Security Contexts : 2
    GTP/GPRS : Disabled
    VPN Peers : Unlimited
    Serial Number: SAD125004FT
    Running Activation Key: 0x00000000 0x00000000 0x00000000 0x00000000
    Configuration last modified by enable_15 at 18:58:52.627 IST Mon Jan
    11
    2010
    Regards
    Madhu

    Application partitiion is what you will be upgrading from 3.1.(10 to 4.0(8).
    MP - maintenance partition is supposed to be 2.1.2 or above which is the same requirement for 3.1.x so, you will be good there.
    Pls. check the compatibility with the swtich code in this 4.0.8 Release Note link:
    http://www.cisco.com/en/US/docs/security/fwsm/fwsm40/release/notes/fwsmrn40.html
    Pls. check the chassis system requirement in the above link.
    commands you will need are:
    copy tftp flash:image
    copy tftp flash:asdm
    falsh:image for OS and flash:asdm if you will be upgrading the asdm as well.
    -KS

  • How to upgrade my macbook pro from 10.6.8?

    i wish to upgrade my macbook pro from 10.6.8 what is the best way?

    If you wish to upgrade from 10.6.8 (Snow Leopard) to 10.8.x (Mountain Lion), first make sure that your model meets the minimum hardware requirements (http://support.apple.com/kb/sp654) and then download ML by purchasing it from the Mac App Store.
    Clinton

  • HOW To: Upgrade vCenter chrageback manager from 2.5 to 2.6

    This blog post explains the detailed steps involved in upgrading vCenter chrageback manager from 2.5 to 2.6
    http://vpirate.in/2014/01/14/upgrade-vcenter-chargeback-manager-2-5-2-6/

    This blog post explains the detailed steps involved in upgrading vCenter chrageback manager from 2.5 to 2.6
    http://vpirate.in/2014/01/14/upgrade-vcenter-chargeback-manager-2-5-2-6/

  • How to upgrade device version's from BES

    Hi Guys,
    I was wondering if you could help, i've been searching the techincal support section and the forums and could someone point me in the right patch to upgrade blackberry handsets via BES v5.
    I can find the software to upgrade via desktop manager but i want to deploy this through our BES 5.0.1
    also I have BES 4.16 which i am migrating the users onto the new BES via the transporter tool, but i've found our IT Policy creates issues with device version 4.3 and needs to be reactivated when migration is complete.
    So i would also like to upgrade the devices on the old BES before migrated them across.
    So is there a way of upgrading a device version from BES 4.1.6 if so could you also provide instructions?
    Is there any issues when upgrading device versions? would i need to resend the service book? it policy? re-activation?
    thanks in advance, i really appricate this.
    Superfly

    Superfly, I found this link below for pushing the upgrade from 5.0.1mr2,
    but, still nothing for 4.6.
     http://www.port3101.org/port-3101-bes-admin-bar-grill/2336-device-software-bundles-configurations-be...
    particularly: http://www.port3101.org/attachments/port-3101-bes-admin-bar-grill/489d1273607365-device-software-bun...
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How to upgrade to Lightroom 6

    I can't find an upgrade price for Lightroom - can anyone tell me how to buy an upgrade from LR 5 to 6?
    thanks

    Ah.. Seemingly you can access this by clicking 'buy' then choosing the upgrader version from the Adobe products page here:
    Products
    This doesn't appear to be an option from the Lightroom page.
    Phew, that took ages.

  • How to upgrade 10.4.11 from a 10.5.6 DVD

    I've been programming since 1961, but Apple's EZness and lack of documentation is driving me nuts. It's "like insert disc and follow the on-screen instructions." Moreover, most posts assume there is NO 10.5.6 on DVD and so one is using Software Update. Since I bought the 10.5.6 + iWork09 + iLife09 combo box, I've got a DVD.
    1) Backup 10.4.11 -- That's EZ.
    2) The first DVD to insert and run is the Tiger Install disc or the new 10.5.6 disc?
    3) Run Disk Utility to check permissions.
    4) What DVD goes in next?
    5) I want to do Archive and Install. Is the Archive folder put on your computer's disk or on a FireWire drive? How much space is needed?
    6) According to the Apple Docs, the "System" is archived. From a UNIX point of view, that is only OS X system components -- not anything else. According to an Apple Genie, "don't worry, it saves everything and after installing 10.5.6 it will automatically put everything back." Which would seem to require a huge amount of disk space -- which makes me doubt the claim.
    All I want to know are the Application and Users folders preserved? What about all the System Library content that relates to applications?

    The best way to upgrade from Tiger to Leopard is by Archive and Install. See,
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.

  • How to upgrade to Mountain Lion from older model?

    My  computer is running slow.  The genius suggested upgrading to Mountain Lion.  I am on 10.5.8 so it doesn't seem to allow me to do that.  How can I upgrade? Thanks!

    The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    RAM needs to be physically upgraded by you or you can pay someone to do it. RAM is pretty cheap compared to the past, so upgrade to as much as you can afford. Mt Lion will thank you for it. I would go to OtherWorldComputing.com, they have great RAM and guarantee their RAM to work on your Mac.
    If the disc you buy for Snow Leopard does not have 10.6.8, here is the updates link;
    Mac OS X Snow Leopard 10.6.8 v1.1 update combo
    http://support.apple.com/kb/DL1399
    Frankly, I find the Genius advice a bit incomplete as Mt Lion is a RAM hog compared to Leopard.

Maybe you are looking for

  • Using Logic 7.2 on a Mac Pro with Protools 7.2.1 and Mac OS 10.4.7

    I am researching purchasing a New Protools/Logic System Seems the version of Protools to use with the new Mac Pros is 7.2.1, which only recently came out to work with the new "Mac Pros" Digidesign has stated thhat it works with and Mac OS 10.4.7 The

  • To remove Double quotes while uploading a file

    Hi All, I have a requirement, where i have to Remove double quotes after uploading a file. I am uploading the file using GUI_UPLOAD. CALL FUNCTION 'GUI_UPLOAD'   EXPORTING     filename                      = v_file   FILETYPE                      = '

  • Yet again "insufficient banwidth"

    In my never ending consternation with iChat….. After weeks of successful AV chats between me in Los Angeles and my brother in NYC, we started getting “insufficient bandwidth” error messages. After much yelling at my ISP I now have moderately acceptab

  • How to Pass Click Value to DB using Java

    How to Pass Click Value to DB using Java and display tat clicked value row data in flex i have created connection with Sql Server using java and drew pie chart from values fetched from XML file created by Java wat i need is when i click pie chart reg

  • Help I've deleted my "Recently Added" Playlist!

    Is there a way to get this back? I've looked everywhere on iTunes and can't seem to figure out how I can get this playlist back. Please help me!