How To Upgrade to Windows 8 - Useful Informations

Hi community
I would like to share very interesting Toshiba page providing the info and details about the new Win 8 upgrade.
*How To Upgrade to Windows 8*
http://eu.computers.toshiba-europe.com/innovation/generic/windows8-upgrade-stepbystep/
Dear Customer,
Microsoft offers to upgrade Windows 7 computers to Windows 8 Pro. The information in this document explains the requirements and how to make use of the Windows 8 upgrade offer.
The upgrade process consists of the 5 following parts:
1. Check if your computer is eligible for upgrade by Microsoft and supported by TOSHIBA.
2. Things to do before upgrading to Windows 8.
3. Order Windows 8 from Microsoft and install it.
4. Download the TOSHIBA Upgrade Assistant.
5. Upgrade software components using the TOSHIBA Upgrade Assistant.
_*Part I: Checking the Eligibility Requirements and List of Supported Models*_
1. This offer is available if you have purchased a PC preloaded with genuine Windows 7 Home Basic, Home Premium, Professional or Ultimate between June 2, 2012 and January 31, 2013.
2. Check from the list of supported models, if your computer model is supported for upgrade by TOSHIBA. Visit https://eu.computers.toshiba-europe.com/innovation/generic/windows8-matrix
_*Part II: Things To Do Before Upgrading to Windows 8*_
1. Update your current version of Windows 7 to the latest version supplied by Microsoft at: http://www.update.microsoft.com.
2. Backup all your files and settings before upgrading. Note: Do not back up files to the same hard disk that Windows is installed on. For example, do not back up files to a recovery partition. You can back up to another drive or DVD.
3. Use the Recovery Media Creator utility to create Recovery media (DVD or USB Flash Memory) which will allow you to restore the factory pre-installed software.
4. If Toshiba Disc Creator is installed on your computer, remove it.
a) Click Start ? Control Panel ? Control Panel ? Uninstall program.
b) Select Toshiba Disc Creator and click the Uninstall/change button.

_*Part III: Ordering Windows 8 from Microsoft and installing it*_
1. Register for the Windows 8 upgrade through the Windows Upgrade Offer website managed by Microsoft https://windowsupgradeoffer.com and follow the online instructions. Submissions must be completed online by February 28, 2013.
2. After registration, you will receive a confirmation that will provide more information as to when the Windows 8 upgrade is available for purchase.
3. After the general availability of Windows 8, you will receive the promotion code and purchase instructions.
4. Use the Recovery Media Creator utility to create Recovery media (DVD or USB Flash Memory) which will allow you to restore the factory pre-installed software.
5. Purchase the upgrade as instructed and download Windows 8. You will also be guided to perform a self-qualifying test via an upgrade step-by-step tool with information on the PC before the upgrade.
6. Follow the online instructions to upgrade the operating system. During this process, select Keep Windows settings, personal files, and apps.
Caution: Operate your computer from the AC power supply. Otherwise, you may run out of battery power during the upgrade process.
_*Part IV: Download the TOSHIBA Upgrade Assistant*_
1. To receive the TOSHIBA Upgrade Assistant and necessary software updates (e.g. BIOS, drivers, utilities, applications) from TOSHIBA, please visit
https://eu.computers.toshiba-europe.com/innovation/windows8_drivers.jsp
2. Follow the online instructions.

Similar Messages

How do I install windows using BootCamp without cd drive fot the new MBP?

I need some softwares for my work (modelsim, altera, ltspices etc) but some of them only supports windows.
New MBP doesnt seem to have a cd driver.
How do I install windows using bootcamp without cd drivers?

You can use a USB thumbdrive to do this, assuming you have access to a windows machine to format the usb stick.
I installed Win7 on my MB Air (2011), which of course lacks a DVD drive altogether, using this technique.
Basically, you download a tool called rEFIt to your macbook. ( http://sourceforge.net/projects/refit/files/rEFIt/0.14/rEFIt-0.14.dmg/download ) When this is installed, it gives you a boot selector menu when you boot the Macbook ('Do you want to boot to MacOS or to the USB drive?')
Then you download and run an Apple tool called Boot Camp Assistant, which allows you to partition your HD for the two operating systems to share; it also pulls down all the windows drivers you need.
Then prep the USB thumbdrive on a windows machine to be a Win7 installer disk. You'll want a drive in the 4gb+ range I think. You have to set up the thumbdrive to be bootable (lots of tools for that available), and then copy all the windows installation files over to it.
Put the thumbdrive in the macbook and boot holding down the option key.
Choose the rEFIt icon on boot, then choose to boot from the thumbdrive, then format your new windows partition to something Win7 can handle, and install windows.
On my machine I followed a slightly more involved process and wiped out MacOS entirely. I would have kept it on a small partition if I'd had a bigger hard drive.
If you need super detailed instructions, CNET has some here:
http://howto.cnet.com/8301-11310_39-20020513-285/install-win-7-on-macbook-air-fr om-a-usb-drive/
Tech-Recipes has some similar instructions here:
http://www.tech-recipes.com/rx/9136/macbook-air-install-windows-7-with-boot-camp -without-an-external-dvd-drive/
If you have any issues after trying this, ping me and I may have solved them when I went through the same process.

How to Upgrade from Windows Vista to Windows 7 on an iMac

I have Windows Vista already installed on my iMac. I would now like to upgrade to Windows 7. I wish to know how do I go about it. Can I upgrade to Windows 7 from within Windows Vista or do I need to go through Bootcamp like you do when you first install Windows on an iMac. I currently have the latest version of iOS installed on my iMac. Thank you for your help.

Dear Mike,
If i want using MAC OS X version 10.6.8, what version should i use preferably parallels, is it free ?
Coz, my parallel and the windows xp suddenly is gone, i don't know why..Can you help me..
Thank you Mike.
Best Regards,
Doni.

How To: Upgrading from Windows XP to Windows 7 pro

I upgrades from windows 7 home to windows 7 pro.
I could not use the anytime upgrade option, so I did a full install
I had a problem that I notice is common for many people, I came up missing drivers for my lan and wifi cards among others, I followed the advice given to others, and found chipset drivers and a few others, however, I had loaded some drivers already, so I am coming up missing the ntwork controler and the usb 2.0 crw. I am also missing the drivers for the camera, and special functions on the key board. I believe that the first step I need to take is to throw away some drivers and reinstall the chiipset drivers and others I have read recommended. However, I don't know what to throw out.

Satellite C55-A5245 Specifications
Satellite C55-A5245 Support Page
Blaine
If you ask for help here, it's generally best to respond in less than a week to someone who's offered to help you. But, let's assume you were very tied up or away.
Regardless, your model's specifications clearly show that your system originally came with Windows 7 Home Premium, and that it came out in 2013. So, it's difficult to understand why you are upgrading from Windows XP to Windows 7. Oh, wait, I see your thread title says from Windows XP to Windows 7 pro, but in the text of your original post it says from Win7 Home to Win7 Pro. Again, this is a little confusing.
Regardless, as it's safe to assume you have already wiped out your Toshiba Recovery Partition in doing a clean install of Win 7 Pro. So, let's just try this. Download this Toshiba utility, double click to begin installation.
Toshiba Software Installer for Windows 7
Please let us know what happens. Good luck.
Mike

How to upgrade to windows 7 in Thinkpad T400?

I have brought Thinkpad T400 in 2008, I want to run windows 7. I just know I need to upgrade my BIOS to activate windows 7. I will buy a windows 7 from BestBuy, Is it ok?
any one can tell me the steps? Thanks a lot.
My Thinkpad T400 is 2764 CTO,
Intel Core 2 Duo P8400, 2261MHz
ATI Radeon HD3400
BIOS:
Version: 7UET43WW(1.13)
Date: 08/19/2008
SLIC:
Vesion: 2.0
PubKey: LENOVOTP-7U
Marker: LENOVOTP-7U
Solved!
Go to Solution.

Hi,
As usual, it is strongly recommended to backup all important data prior to upgrading any operating system. It is also strongly recommended to verify all currently used hardware and software with the Windows 7 Compatibility Center.
Depending on if you are moving from Microsoft Windows XP or Microsoft Windows Vista there are two different types of installations that can be performed when migrating to Microsoft Windows 7.
First, it is important to note that there is not an in-place upgrade from Microsoft Windows XP to Windows 7. Instead of an upgrade, there is a type of installation known as a “custom” installation. This option for installation is also available when moving from Windows Vista. A custom installation will attempt to back up your data files and bring them over to Windows 7 in what is known as a “windows.old” folder however this is considered to be a clean installation. Your applications that were installed prior to Windows 7 will require reinstallation. You may find the following resource Upgrading from Windows XP to Windows 7 helpful.
If moving from Windows Vista, there is an option for an upgrade installation. The upgrade installation must be initiated from within Windows Vista. You may find the following resource Upgrading from Windows Vista to Windows 7 helpful.
Jessica
Windows Outreach Team – IT Pro

How to upgrade to Windows 10 without waiting in line?

No choice but to upgrade to windows 10, since Microsoft will let go of the older versions ...

You can follow steps given in below link to upgrade to Windows 10,
http://www.microsoft.com/en-in/windows/windows-10-upgrade Or you can just go to the Windows 10 download link and directly download the ISO and install,
https://www.microsoft.com/en-us/software-download/windows10ISO

How to upgrade from Windows 8.1 OEM to Windows 8.1 Enterprise

Kindly advice
windows 8.1 oem upgrade to enterprise

SG
To enable us to help you better, you need to provide as many details as you can about the problem you are experiencing.
If you design your question effectively, you can get good information from people who are knowledgeable about the topic and who are happy to help you.
Prepare your question. Think it through. Hasty-sounding questions get hasty answers, or none at all.
What troubleshooting have you done so far?
Asking an effective question will get you help faster read how here
Suggestions for asking for help on a site.
http://www.catb.org/~esr/faqs/smart-questions.html
Wanikiya and Dyami--Team Zigzag

How to upgrade from windows 8.1 to windows 8.1 Pro

Just bought a Tosihba satillite s55-b5268 and have been trying to do a system upgrade, but have been un sucessful. My windows DVD is recognized and loads up but after it goes thru all the steps and finishes I still have windows 8.1 on my system. Any suggestions on how to get around this problem would be greatly appreciated

The ISO file (i.e., the DVD) for Windows 8.1 and for Windows 8.1 Pro are identical. Only the product key is different
The important part is this. If you do a clean install of Windows, you will need to struggle with the dozens of drivers and utilities that make your laptop work as designed. And the order of installation is problematic.
Your best bet is to restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. Then upgrade to Pro as I have described using the new key you bought. It takes only minutes.
If you failed to create recovery media, obtain it from Toshiba. Scroll down to Get Recovery Media here
See the instructions in the section Restoring from recovery media, which begins on p. 50 of the User's Guide.
Satellite/Satellite Pro L40/L50/L70/S40/S50/S70-B Series User’s Guide
-Jerry

Easy instructions on how to upgrade my Windows 7 OS to windows 8.1

Hi, I have just purchased a Lenovo E73 thinkcentre that has Windows 7 OS installed and I would like to change this to Windows 8.1 OS but I cannot find any instructions on Google or Lenovo websites on how to do this. All I have is 4 DVD's that came with the PC which seem seem to have Windows 8 Pro recovery disks but no instructions on how to use them. Has anyone written an easy to follow procedure on how to do this upgrade ? I know that if install Windows 8.1 I will have to pay a license fee to Micro$oft.

Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/
Clone Lion to an external drive.
Download the drivers which you will need via Boot Camp Assistant.
Windows can format and use your entire hard drive.
Carbon Copy Cloner 3.4 can clone your Lion Recovery and main HFS partition to your external drive. Your 2011 came with Lion and with network insall but good to have a local copy OS X.
So really it is just that you can't download the Boot Camp Apple drivers directly inside Windows. Normally you would do that to get hardware support.

How to upgrade from windows 8.1 --32 bit media to 64 bit media

Dear Sir,
Plz provide a link to upgrade OS fro windows 8.1--32 bit media to 64bit media....in my laptop --64 bit
Reason: since my touchpad is not working at all
Thanks & Regards
M.Hanumantha rao
7774034953

Deart Sir,
Please provide a solution to convert my WIndows OS 8.1-- 32 bit to Windows 8.1 --64 Bit
Because my laptop is 64 bit.but i purchased and Installed windows 8.1--32 bit.
the problem is "Mouse touchpad is not Working at all".because Dell frivers is not supportable for Windows 8.1 --32 bit
but for only windows 7-32bit ,Windows 7--64 bit and Windows 8.1--64 bit
So kindly let me know the process of "How to convert Windows 8.1 --32 bit to windows 8.1--64bit"
Thanks & Regards
M.Hanumantha rao
07774034953 / 09491895917
[email protected]
India

How to upgrade 7941 to use SIP

Hello,
I would like to upgrade 7941 to Sip (attached). I have used tftp32 on my Windows 7 and i have configured DHCP into my tffp with other required option. I connected my pc and 7941 to P0E switch . I tried to boot my phone and watch Tftp server in order to have some activity showing the upgrade process bu nothing happen. thanks for advising

Hi, I met similar problem when I tried to upgrade my 7941G from SCCP to SIP.
I used to successfully upgrade a 7940G from SCCP to SIP with the tftp32 server. But, with 7941G, it seems the firmware files are much different.
Now my 7941G only showed a dark screen to me and stopped working. It looks the phone refused to pull the firmware from the server as I can't see any files happened. Maybe the firmware we had is not enough, I guess.

Help! Need advice on how to upgrade to Windows 7 from Windows 7 Evaluation Copy: Build 7100

I am on an HP Pavillion Media Center m8200m PC. The computer came with Vista on it and did not come with any Vista operating system installation discs when I bought it. I did make a set of two system recovery discs from this original Vista operating system, About 3 months ago, I decided to put on an evaluation copy of Windows 7 (Build 7100). In order to do this, I had to remove Vista completely from my computer and then install the the Windows 7 evaluation download from Microsoft. It has worked fine since, but will expire shortly. I now want to put on a permanent installation of Windows 7, but am unsure how to do this. Can someone please explain the procedure to me. I have read that I cannot upgrade to anything directly from the Windows 7 evaluation copy. Do I need to recover the computer and install Vista from the recovery discs (providing I can reinstall Vista from these recovery discs), then upgrade to a permanent version of Windows 7 (from a less expensive Windows 7 upgrade). Or, will I have to buy a full version of Windows 7 and start from scratch? Also, is there a way to retain all my data on this computer during this new installation of Windows 7, or will I lose averything including programs, data, etc. and have to reinstall it once I have the new permanent operating system on the computer?
I'm usually pretty good with this stuff, but can't seem to get a straight answer. I want to do this as soon as possible, so would greatly appreciate a straight, clear explanation of what to do. I would truly appreciate it.

It is possible to upgrade the evaluation version to the RTM version with some fiddling as shown here. It would be better to do a clean install.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How to invoke a window using JNI?

Hello,
I need to invoke a C++ DLL from a Java Applet using JNI. The DLL should display an image in a separate window. Further I should be able to set the position of the DLL window, and should be able to minimize, maximize the DLL window from the Applet.
Well I am fairly new to C++. Any suggestions regarding how I should proceed?
GLim

Hi jschell,
Thanks for the reply.
But I am sorry that I am not sure whether I understood your point. What I understood is I make an exe that displays the image and run it from Java like SHELL function in VB. In that case can I specify a particular image to be loaded from the applet? The applet and exe needs to be constant touch as the location , size etc of the window displaying the image could be controlled by the applet.
I have created a DLL which displays the specified the image in a modeless dialog box. I have succeded in invoking the DLL from applet. But the dll window hangs as soon as it loads! I got a suggestion to implement the display of modeless dialog box inside thread. Now I am investigating how to implement thread :) Please send in your advice if you have any?
Also it could be real help if you could mentions common problems that might occur in such situations.
Thanks in advance
gLim

How to stop popup window using phone layout for display - Responsive HTML5, RH11

Hello,
I'm using the new Responsive HTML5 output in RH11. For some of my hyperlinks, I want to use a pop-up to display the linked topic. In the output, the pop-ups work, but they are automatically displayed using the phone layout, with the associated navigation buttons at the bottom, the help title, and so on. I don't want this - I just want a plain popup window. So, I tried to add a Screen Profile, set to 400 x 500 pixels exactly (thinking that this is bigger than a phone, but smaller than a tablet). I also added a corresponding Screen Layout. In the popup properties, I set the popup size to be 400 x 500 pixels. I guess there is something else I need to do to get this to work... but I don't know what that is. (I tried creating a new Window on the Project Set-up tab, and I tried creating a different master page. These things didn't work.)
Can anyone tell me if what I'm trying to do with these popups is just a bad idea and it won't work well with certain browsers?
Thanks!
Alexandra

I am confused as the responsive layouts are one size fits all, that is the point of them. You have one layout that morphs according to window size.
Screen Profiles are only used within Multiscreen HTML5 layouts where you can map screen profiles to different adaptive screen layouts, such as desktop, tablet and phone. That mapping does not apply to responsive layouts.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How to upgrade a DB using EXP/IMP

Guys
I need to upgrade a small DB using IMP and EXP from 8i to 9i. Can you guys help me with the steps. Perhaps I was using the wrong search words, but I found no satisfying answers on google.
1. Recreate the target database TRGT with the correct tablespace definitions.
I need to query from dba_datafiles, dba_tablespaces, dba_temp_files?
2. EXPort the source database SRC
3. IMPort the dump file
I am little unsure of step #1. Can you help me with the details pls?
TIA

. Recreate the target database TRGT with the correct tablespace definitions.I need to query from dba_datafiles, dba_tablespaces, dba_temp_files?
Before starting the import,u need to create a fresh database on new 9i server.and create new tablespaces with same name that was present in 8i.after it u can start ur import with using ignore=y,otherwise it says following tablespace is already exists.
**import also automatically create the required tablespaces but if u want to change the storage attributes or location of dbf files ,its better that u create it manually before starting imp.
Kuljeet

How To Upgrade to Windows 8 - Useful Informations

Similar Messages

Maybe you are looking for