How to upgrade tracks from NetWeaver 7.0 to 7.3?

Hello!
I'm trying to create a Web dynpro 7.3 track from a 7.0 track. It's for a sandbox install of 7.3 so I don't want to change the current track or SC but I want to include all my developed code for testing purposes.
I've read about track migration here:
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8061e964-2036-2e10-ee9d-ef21d174fdd9?quicklink=index&overridelayout=true
and here:
Migrating/Upgrading NWDI from 7.0 to CE 7.1
but it's missing some important information. How do I get my current code into the new track? It just says "Import your SCs and required SCs in the new track in NetWeaver 7.3".
My old track is called Extern and contains a SC called ExternSC. The new track is called Portal73 but which SC should it contain?
I can't check in my old SC without adding a dependecy to it.
Should I create a new Extern73SC with dependency to the old one? Then it wants to check in the old 7.0 dependencies as well.
I want to be able to create projects from the old DCs so they can be migrated to 7.3 as well.
The forum thread above suggest changing the dependencies of the current SC to 7.3 components  and add that to the new track, but that would break my current 7.0 track, right? I tried to make a new version of the SC with the same name but I still couldn't import the existing code.
Is there a more complete source for track migration?
Please help me if you can
Regards,
Richard Linnander
Edited by: Richard Linnander on Jun 30, 2011 10:39 AM
Edited by: Richard Linnander on Jun 30, 2011 10:41 AM

Thank you for your answer!
Just to make sure I do this correctly.
I have a product called ExternProd (1.0), and an existing SC called ExternSC (1.0) that belongs to the product.
Do I need to create a new product version as well?
Otherwise I do this:
In Software catalog in SLD on the NWDI i click "new software component version"
In the dialog box I select ExternProd 1.0, unit Extern 1.0, enter vendor, name ExternSC and version 2.0 and click create.
I define dependencies to SAP SCs but NOT to ExternSC 1.0.
Now if i go to the product I see two software units for ExternProd 1.0.
I add ExternSC 2.0 to my track and then I should be able to forward the old SC and import it in development, or should it be exported and checked in?
Is this what you meant?

Similar Messages

  • How to upgrade WEBADI from 12.1.2 to 12.1.3

    I have a issue, the system is on 12.1.2, and i want to define layout for FA-MASSADDITION DETAILED like on 12.1.3, can see the attribute1-30.
    How can i do or apply any patch?

    Your question is not clear. The subject of the threads is "How to upgrade WEBADI from 12.1.2 to 12.1.3" and you want to create a layout in 12.1.2
    Do you mean to say that this layout works properly in 12.1.3 and you want the same layout to work in 12.1.2? If yes, please see if these docs help.
    How To Add DFF In Web ADI For The Fixed Assets Addition Integrator In R12? [ID 863503.1]
    Web ADI: Context Sensitive DFF Value Is not Showing on Mass Addition Form After Upload [ID 986759.1]
    Web ADI: OA_FLEX_FA Error When Uploading Assets With DFF After Patch 10022011 [ID 1297196.1]
    Thanks,
    Hussein

  • How to Upgrade datasources from 3x to 7x versions

    Hi Experts
      How to Upgrade datasources from 3x to 7x versions.
      I am planning to upgrade exisisting 3x data sources which are used in data loading are there any risks involved in upgrade
    Thanks

    Hi,
    When you migrate a 3.x DataSource (R3TR ISFS) in an original system, the system generates a DataSource (R3TR RSDS) with a transport connection. The 3.x DataSource is deleted, along with the 3.x metadata object mapping (R3TR ISMP) and transfer structure (R3TR ISTS), which are dependent on it. If a PSA and InfoPackages (R3TR ISIP) already exist for the 3.x DataSource, they are transferred to the migrated DataSource, along with the requests that have already been loaded. After migration, only the specifications about how data is loaded into the PSA are used in the InfoPackage.
    You can export the 3.x objects, 3.x DataSource, mapping and transfer structure during the migration so that these objects can be restored. The collected and serialized objects are stored in a local table (RSDSEXPORT).
    You can now transport the migration into the target system.
    When you import the transport into the target system in the after-import, the system migrates the 3.x DataSource (R3TR ISFS) (as long as it is available in the target system) to a local DataSource (R3TR RSDS), without exporting the objects that are to be deleted. The 3.x DataSource, mapping (R3TR ISMP) and transfer structure (R3TR ISTS) objects are deleted and the related InfoPackages are migrated. The data in the DataSource (R3TR RSDS) is transferred to the PSA.
    Regards,
    Suman

  • How to upgrade OSX from 10.5.8

    Need to know how to upgrade OSX from 10.5.8 to latest version that will run on my Power Book Pro
    Intel Core 2 Duo

    Purcahse from Apple the Snow Leopard install DVD and install that.
    Then upgrade to the 10.6.8
    From there with the App Store you will be able to upgrade to whatever your MBP will support.
    Allan

  • How to upgrade eSourcing from version 5.1.8 Patch 3 to 5.1.8 Patch 4

    Please some one can guide me How to upgrade eSourcing from version 5.1.8 Patch 3 to 5.1.8 Patch 4 since i am new in CLM.

    Hello Gadewar,
    First of all make sure you read all the details given in the Upgrade Guide located at "Installation and Upgrade Guide"->SAP SRM->SAP E-Sourcing 5.1/SAP CLM 2.0->E-Sourcing 5.1/CLM 2.0 Component Upgrade Guide PDF at service.sap.com/support website.
    Note you need to have the support account to login to that website.
    How ever I am listing down basic steps required for upgrade below.
    1) Download the installables from the website I did mention above, have DB jar, have custom jar (optional).
    2) Take backup of the DB.
    3) Take backup of Config folder. Also take backup of the <home Dir>/Lib if you have some customizations in the form of JARS.
    3) Make sure the userid which is used for connection to DB have the required permission like CONNECT, RESOURCE, UNLIMITED TABLESPACE etc. It is given in the guide I mentioned above in section 4.1 Verify Privileges of Oracle Service Account.
    4) Stop ESO instance and run the setup and then upgrade scripts.
    5) Undeploy the old ESO application from App server and then deploy new .EAR from new <home dir>/fsapp on the app server.
    6) Start the app server and your ESO will be ready. You may need to use Workbooks to upload Localized Resources. This is the case if you have modified some OOTB localized resources in the past as a part of customization and have not used the overrides to give new resource values. If you have used overrides for localized resources in the past then you are good and need not to load the workbook.
    Again usage of Workbook depends on the requirement to requirement. You may need to use workbook based upon your business needs.
    Make sure you have not modified any OOTB query definitions as a part of customizations, if that is the case you will loose those query definitions as upgrade scripts overrides OOTB queries and then you should backup those as well before upgrade and then you may re-pull them after upgrade.
    Regards,
    Jagjeet Singh
    Edited by: ESO123 on Feb 2, 2011 8:54 PM

  • [TOUCH] How to delete track from playlist on play

    Is it possible to delete a track from a playlist, but not have the track delete from the player? I cannot seem to figure out how, but I am guessing I am missing something because that seems like a pretty basic function.
    I go into Playlists, find the playlist I want, click OK, ask to View Tracks. I find the track I want and click on the OK button. It give me the option to Delete the Track, but when I select that option it deletes the track from the player, not the playlist.
    I know I could do this if I used my PC to do it, but I wanted to be able to do this in the car when I realize I have a song on a playlist I do not want there.
    Thoughts?

    groovy girl,
    It sounds like your app is not responding.
    Try to exit itunes,then restart your PB.
    Then go to Finder>Go>Utilities>Disk Utility and repair permissions.
    Then go back to itunes and see if the delete command works.
    Good luck,
    Scott

  • How to upgrading  system from CRM 4.0 to 7.0

    How to upgrading CRM system from CRM 4.0 to 7.0 ?
    What is procedure to upgrate it ? Any document available for doing this ?
    Regards,
    Anup Reche

    Hi
    You can find the upgrade documentation here:
    http://service.sap.com/instguides
    SAP Business Suite Applications >  SAP CRM > SAP CRM 7.0 >Upgrade
    hope it helps
    Rupesh

  • How to upgrade Tomcat from 5.5 to 6.0 on BusinessObjects XI 3.1 SP5

    Hi,
    I have recently installed BOE Enterprise XI 3.1 SP5 on SLES11.
    Tomcat 5.5 has been installed as part of the Installation.
    JVM 1.5 was also installed.
    Now since Tomcat 5 is in End of Life support, hence it has been marked as a security risk by the scans performed.
    I need to upgrade Tomcat from 5.5 to 6.0.
    I am looking for relevant documentation as I couldn't find any official guide for it.
    Can someone help me out here with the official documentation on tomcat upgrade.
    Regards,
    Puneet

    Dear Puneet,
    Here are the steps to upgrade from Tomcatxx to Tomcat yy:
    The below steps are for upgrading default 5.5.20 tomcat to a higher
    incremental release of tomcat.
    This method is not intended in an upgrade from default 5.5.20 to a major
    release version such as tomcat 6 or 7.
    Stop the Tomcat
    Run the script ./tomcatshutdown.sh in bobje directory.
    Rename bobje/Tomcat to tomcat_bak.Command: mv bobje/Tomcat
    tomcat_bak
    Download tomcat 5.5.xx core tgz file from Apache website to bobje/tomcat and
    extract using the command: tar -xvf tgz filename
    Create new folder apache-tomcat-5.5.xx.Command:mkdir apache-tomcat-5.5.xx
    Rename folder apache-tomcat-5.5.xx to Tomcat55 using the move command
    Go to the deployment directory which is one level above bobje.
    Run the script ./wdeploy.sh tomcat55 deployall
    Message:"Build Successful"
    Run the script ./tomcatstartup.sh to start the Tomcat.
    https://support.wdf.sap.corp/sap/support/notes/1635287
    Best regards,
    Saloua

  • How to upgrade system from serial communication to parallel communication

    Hi,
    I am working on Lab VIEW 8.5.In my project I am using ADAM cards(7) for analog/digital inputs/outputs. Communication is done via RS 232 serial cable. Right now my system is working fine, but if i want to make it more fast i will need to use parallel communication right? Because Simultaneous inputs and outputs are processed. How much my communication file will change? Which card i should use?
    How to upgrade system? On which factors it depends or it affects? I need guide lines.
    Thank you
    Gaurav k
    CLD Certified !!!!!
    Do not forget to Mark solution and to give Kudo if problem is solved.

    Hi
    In your setup you have a ADAM 4250 RS232/485 repeater talking with 7 instruments in a network. Each instrument have a unique address, and you can only address 1 instrument at a time. If you need more speed you have to insert more ADAM 4250 units in your system and more RS232 ports on the PC. Identical ADAM instruments may receive commands over the same communication line, but transmit data on a unique communication line. You can not use the parallel port in your setup at all. This is not a Labview problem but a hardware problem. If speed is critical maybe the Ethernet I/O Modules: ADAM-6000 series are better for your setup 
    Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
    (Sorry no Labview "brag list" so far)

  • How to store tracks from my PC to ipad via shared

    I have got my ipad to recognise shared tracks from itunes stored on a non apple PC, but would like to store tracks onto ipad so can play away from pc too. Can this be done? Thanks

    You can't copy music tracks to an iPad via home sharing, you will either need to sync them via your computer's iTunes, or you might be able to re-download them (if they are iTunes purchases and you are in a country where music can be re-downloaded and/or you've signed up to iTunes Match).

  • How to transfer tracks from iOS Garage band to iOS Pinnacle Studio on iPad?

    I record songs in Garageband on my iPad 2, and now that I've finally got a HD camera I'm planning on starting a music YouTube channel; videos of me playing/singing the songs. I'd like to know the easiest way of getting my tracks from Garageband into Pinnacle Studio so I can produce the videos.

    A nice work-around, Porkycee!
    But it is a bit silly to have to buy iMovie, to be able to use sound files in a different, more expensive movie application.
    And then to have to save the audio to the camera roll, to be able to access GarageBand songs in a movie application.

  • How to move tracks from one album to another in itunes library?

    I have imported an album from my 'Vuze Downloads' folder in my 'iTunes library' but it appears in the library as three seperate albums.
    How to i get all the tracks into one album as they were meant to be?
    Cheers

    Make sure all tracks have the same album name and same artist name (look under Get Info) in order for them to group together. If the album is a compilation with different artists, under Get Info, mark it as a compilation.

  • How to delete tracks from iOS device?

    Hello!
    Could somebody help me with a problem?
    How can I delete tracks, stored in my device memory (im usuing iPhone 4) when itunes match mode turned on?
    "Swipe to delete" on tracks/artist doesn't work. So the swipe works only when itunes match mode if off and its very uncomfortable to switch off itunes match everytime if I just wand to delete few albums!

    There is actually a simple solution but you have to delete all of the music thats on the device you cant get rid of the tracks individually go to setting->general->usage under storage find music swipe to delete, clears any music stored from itunes match

  • How to upgrade software from 10.5 to 10.6

              Hi I have a black macbook from 2008 and currently run 10.5.8. But I want to upgrade to a snow leopard. How can I do this? I tried inserting the CD but it just quit saying that it cannot be installed.

    Do you have the retail disk that looks like this?
    Or gray disks that look like this?
    Those gray disks will only work with the Mac model that they shipped with.

  • How to upgrade macbook from 10.5.8 to 10.6.8

    How do i upgrade my macbook from 10.5.8 to 10.6.8  it is a late 08 book  with intel processors

    Welcome to the Apple Support Communities
    Call 1-800-MY-APPLE to buy Snow Leopard. Make a backup on an external drive, insert the DVD and upgrade. Finally, open  > Software Update to install the latest version. If you have got a Late 2008 Aluminum MacBook, you can upgrade to OS X Mountain Lion. Open App Store and purchase OS X Mountain Lion. See if your programs are supported > http://www.roaringapps.com

Maybe you are looking for

  • My iPod Touch 5th generation (running IOS 8.1.2)...

    My iPod Touch 5th generation (running IOS 8.1.2), when connected to my iMac (running OS X Yosemite) will charge, but is not regained, or for that matter even noticed by the iTunes application. The iPod will sync to dropbox when connected, but nothing

  • Apple iPod Update Server Error

    Whenever I try to run an update for my iPod through iTunes, it comes up with an error that says that "The iPod server network could not be contacted." I have parental controls set up on my computer applied to me, and I'm wondering if that is the case

  • Save waveform data with corresponding time array to spreadsheet file

    Hello to all I am looking for a possibility to save voltage data acquired and displayed continousely to a spreadsheet file. Acquiring and displaying is not a big problem, but I have troubble to save the data with the corresponding timestamp with more

  • Problem with Sender in RFx emails

    Hi Folks, I have some problems in sender of RFx documents. The e-mail of sender is the buyer e-mail, but in sometimes the system use the WF e-mail for send smartforms. I checked in SOST, and sometimes the sender and email is correct sometimes no. Can

  • CRM_ORDER_MAINTAIN with many contracts

    Hi, I have a probleme to update more than one contracts with the Function Module CRM_ORDER_MAINTAIN. I want to add agreement CRM and so I use the FM with below parameters : it_price_agreements_crm = gt_price_agr_crm ct_input_fields                  =