How to upload a file in local drive?

hi,
i have an requirement that is to upload a file into local machine and that file name will stored into database.
plz help me how to do that.
Regards
D.Mahesh Babu

Hi ,
Method delete() in File class

Similar Messages

  • SQL 2012 Cluster- How to or Steps to Move Tempdb Files from Local drive to Shared volume

    Hi..
     I did Installation of SQL Server 2012 Cluster. During this setup I installed Tempdb Files on Local drive. Now I want to move this tempdb files from local drive to Shared Drive . When I am trying to move I am getting below error.
    Does any one can help me or provide the steps to move this tempdb files from local drive to Shared Drive ?
    Msg 5184, Level 16, State 1, Line 1
    Cannot use file 'Z:\Tempdb\tempdb.mdf' for clustered server. Only formatted files on which the cluster resource of the server has a dependency can be used. Either the disk resource containing the file is not present in the cluster group or the cluster resource
    of the Sql Server does not have a dependency on it.
    Thanks 
    Regards..
    Please Mark As Answer if it is helpful. \\Aim To Inspire Rather to Teach

    Hi,
    The error message may be thrown out when you attempt to create a database on another shared cluster drive when the SQL Server resource is not dependent on that disk.
    Check if you are in the scenario which mentioned in the following article:
    How to create databases or change disk file locations on a shared cluster drive on which SQL Server was not originally installed
    http://support.microsoft.com/kb/295732/en-nz
    Here is a thread with similar issue:
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/c9f80af7-5b51-4c43-a2a0-f9c7d97aa41d/sql-disk-dependency-problem-on-sql-2008-cluster-including-errors
    Hope it helps.
    Tracy Cai
    TechNet Community Support

  • How to upload Excel file in BI using function module in abap program

    How to upload Excel file in BI using function module in abap program?

    Hi Anuj,
    To upload the file , you can try a standard program "RSEPSFTP" .
    while you execute the program , a selection screen appears in which the inputs should be give as
    RFC destination - The target server name
    FTP command- PUT
    local file - your file name
    local directory - path of your local file
    remote file - your target file name
    remote directory - where it has to be stored
    Hope this is useful for you
    Thanks & regards
    Anju

  • Firefox 7.0 - Can not upload the file from local machine to server...gives "error 404 : file not found"

    firefox 7.0 - Can not upload the file from local machine to server...gives "error 404 : file not found"

    you have not understood my point
    how does this code will run on servlet when I want to upload a file from client's
    machine to server machine
    what I am doing is I am giving an option to the user that he/she can browse the file and then select any file and finally it's action is post in the jsp form for which I have sent the code
    All the computers are connected in LAN
    So how to upload a file from client's machine to server's machine
    Plz give me a solution

  • How to upload pdf file in a canvas in flex web application?

    how to upload pdf file in a canvas in flex web application?

    Hey saif.antri,
    You can view PDFs and more using iBooks on your iPhone:
    iBooks: Viewing, syncing, saving, and printing PDFs on iPhone, iPad, and iPod touch
    http://support.apple.com/kb/HT4227
    Have a great day,
    Delgadoh

  • How to upload .CSV file from Application Server

    Hi Experts,
        How to upload .CSV file separated by ',' from Application server to an internal table.
    Invoice No,Cust No,Item Type,Invoice Date,days,Discount Amount,Gross Amount,Sales Amount,Customer Order No.,Group,Pay Terms
    546162,3233,1,9/4/2007,11,26.79,5358.75,5358.75,11264,HRS,11
    546163,2645,1,9/4/2007,11,3.07,305.25,305.25,10781,C,11
    Actually I read some already answered posts. But still I have some doubts.
    Can anybody please send me the code.
    Thanks in Advance.

    Hi Priya,
    Check this code
    Yhe logic used here is as follows,
    Get all the data into an internal table in the simple format ie: a row with one field contains an entire line
    After getting the data, we split each line of the table on every occurrence of the delimiter (comma in your case)
    Here, I have named the fields as field01, field02 etc, you could use your own names according to your requirement
    parameters: p_file(512).
      DATA : BEGIN OF ITAB OCCURS 0,
              COL1(1024) TYPE C,
             END OF ITAB,
             WA_ITAB LIKE LINE OF ITAB.
      DATA: BEGIN OF ITAB_2 OCCURS 0,
        FIELD01(256),
        FIELD02(256),
        FIELD03(256),
        FIELD04(256),
        FIELD05(256),
        FIELD06(256),
        FIELD07(256),
        FIELD08(256),
        FIELD09(256),
        FIELD10(256),
        FIELD11(256),
        FIELD12(256),
        FIELD13(256),
        FIELD14(256),
        FIELD15(256),
        FIELD16(256),
       END OF ITAB_2.
      DATA: WA_2 LIKE LINE OF ITAB_2.
        OPEN DATASET p_FILE FOR INPUT IN TEXT MODE ENCODING NON-UNICODE.
        IF SY-SUBRC = 8.
          WRITE:/ 'File' , p_FILE , 'cannot be opened'.
          LV_LEAVEPGM = 'X'.
          EXIT.
        ENDIF.
        WHILE SY-SUBRC <> 4.
          READ DATASET p_FILE INTO WA_ITAB.
          APPEND WA_ITAB TO ITAB.
        ENDWHILE.
        CLOSE DATASET p_FILE.
      LOOP AT ITAB INTO WA_ITAB.
        SPLIT WA_ITAB-COL1 AT ','    " where comma is ur demiliter
         INTO WA_2-FIELD01 WA_2-FIELD02 WA_2-FIELD03 WA_2-FIELD04
         WA_2-FIELD05 WA_2-FIELD06 WA_2-FIELD07 WA_2-FIELD08 WA_2-FIELD09
         WA_2-FIELD10 WA_2-FIELD11 WA_2-FIELD12 WA_2-FIELD13 WA_2-FIELD14
         WA_2-FIELD15 WA_2-FIELD16.
        APPEND WA_2 TO ITAB_2.
        CLEAR WA_2.
      ENDLOOP.
    Message was edited by:
            Kris Donald

  • How to upload XML file from Application server.

    Hi,
    How to upload XML file from Application server.Please tell me as early as possible.
    Regards,
    Sagar.

    Hi,
    parameters : p_file type ibipparms-path obligatory.
    ***DOWNLOAD---->SAP INTO EXCEL
    filename1 = p_file.
    call function 'GUI_DOWNLOAD'
      exporting
      BIN_FILESIZE                    =
        filename                        = filename1
        filetype                        = 'ASC'
      APPEND                          = ' '
      WRITE_FIELD_SEPARATOR           = 'X'
      HEADER                          = '00'
      TRUNC_TRAILING_BLANKS           = ' '
      WRITE_LF                        = 'X'
      COL_SELECT                      = ' '
      COL_SELECT_MASK                 = ' '
      DAT_MODE                        = ' '
      CONFIRM_OVERWRITE               = ' '
      NO_AUTH_CHECK                   = ' '
      CODEPAGE                        = ' '
      IGNORE_CERR                     = ABAP_TRUE
      REPLACEMENT                     = '#'
      WRITE_BOM                       = ' '
      TRUNC_TRAILING_BLANKS_EOL       = 'X'
      WK1_N_FORMAT                    = ' '
      WK1_N_SIZE                      = ' '
      WK1_T_FORMAT                    = ' '
      WK1_T_SIZE                      = ' '
    IMPORTING
      FILELENGTH                      =
      tables
        data_tab                        = it_stock
      FIELDNAMES                      =
    exceptions
       file_write_error                = 1
       no_batch                        = 2
       gui_refuse_filetransfer         = 3
       invalid_type                    = 4
       no_authority                    = 5
       unknown_error                   = 6
       header_not_allowed              = 7
       separator_not_allowed           = 8
       filesize_not_allowed            = 9
       header_too_long                 = 10
       dp_error_create                 = 11
       dp_error_send                   = 12
       dp_error_write                  = 13
       unknown_dp_error                = 14
       access_denied                   = 15
       dp_out_of_memory                = 16
       disk_full                       = 17
       dp_timeout                      = 18
       file_not_found                  = 19
       dataprovider_exception          = 20
       control_flush_error             = 21
       others                          = 22
    if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
    Regards,
    Deepthi.

  • How to upload a file in servlet ?

    hi i am new to this concept ..............
    i need upload a file in mysql database .........
    i created a form ...
    <html>
    <form method="post" action="http://localhost:8080/examples/servlet/UploadFile" enctype="multipart/form-data">
    File
    <input type="file" name="upload"/>
    <input type="submit" value="load" />
    </form>
    </html>
    what servlet receives from request ? how it will be stored in database ...
    i need a detail explanation ...
    Thanks

    The apache jakarta commons FileUpload project has sample code for how to upload a file.
    To store the file in the database you would use a preparedStatement. You can use anyone of the following methods ; setBlob, setBinaryStream, setBytes.
    The datatype of the column storing the document depend on the databse. SQL Server used image and postgres uses bytea

  • How to upload a file in BPEL Console Using JSP in JDeveloper, pleae........

    I am very new to this JDeveloper & BPEl Process , please could some one help in ersolving my problem that is , how to upload a file in BPEL Console Using JSP in JDeveloper.

    Hi,
    ADF Faces provides you with the file upload component
    http://download-uk.oracle.com/docs/html/B25947_01/web_complex006.htm#CEGCEDHF
    http://download-uk.oracle.com/docs/html/B25947_01/appendixa007.htm#CHDEDCFA
    This gives you a handle to the file content. However, uploading files through a service is different and I suggest to consult teh BPEL forum for this BPEL
    Frank

  • How to upload a file in BPEL Console Using JSP in JDeveloper, please help..

    Please I am new to Jdeveloper and to BPEL Process of OASuite,I want to know , how to upload a file in BPEL process using JSP in Jdeveloper IDE.
    The main aim is first we need to upload a file in JSP , it has to go to BPEL Process & it has to read the file & write the respective file in return to JSP through BPEL Process. Please I am in Urgent need of the Query , please help me ASAP.
    Send to me response Please.....................................

    Hi,
    I thin that you asked the same question before and I premember that I ointed you to the ADF BC developer guide and the SRDemo if your application uses JSF. For plain JSP - if you Google for: JSP and file upload then you find plenty of sources for JSP and Struts.
    The remaining part is how to stiff the file into a BPEL service on the middle tier. For this I recommended to ask your question on the BPEL forum
    BPEL
    Note that the BPEL integration would be easier if it was done on the middle tier and not onthe client
    Frank

  • How to upload a file in Flex2?

    How to upload a file in Flex2? Thanks.

    Joekin wrote:
    > How to upload a file in Flex2? Thanks.
    Use class flash.net.FileReference. The browse() function
    prompts the
    user for a file (similar to HTML's <input type=file>
    ; the upload()
    function uploads the file that the user specified.
    To do multiple files at once, use FileReferenceList.
    - Mike Morearty
    Developer, Flex Builder team
    http://www.morearty.com/blog

  • How to upload a file in bdc  from application server

    how to upload a file in bdc  from application server

    Hi
    Check if this is useful and reward.
    PERFORM UNIX_UPLOAD.
    FORM unix_upload.
      DATA : lv_string(600) TYPE c.
      lv_string = p_fname. "p_fname is the filename  in path
    OPEN DATASET lv_string FOR INPUT IN TEXT MODE ENCODING DEFAULT.
      IF sy-subrc <> 0.
        MESSAGE 'File Not Found' TYPE 'I'.
        LEAVE PROGRAM.
      ENDIF.
      DO .
        READ DATASET lv_string INTO gs_gfile.
        IF sy-subrc NE 0 .
          EXIT.
        ENDIF.
        APPEND gs_gfile TO gt_gfile .
        CLEAR  gs_gfile .
      ENDDO.
      CLOSE DATASET lv_string.
      CLEAR lv_string.
      DATA: lc_split TYPE c VALUE cl_abap_char_utilities=>horizontal_tab.
      LOOP AT gt_gfile INTO gs_gfile .
        SPLIT gs_gfile AT lc_split INTO
                                       gs_ipfile-field1                           
                                       gs_ipfile-field2.
      ENDLOOP.
    ENDFORM.                    "unix_upload
    here gs_ipfile is the same structure as your input file to upload
    and
    gs_gfile is the work area of the internal table containing characters as :
    TYPES  : BEGIN OF  ygs_gfile    ,
              data(600)             ,
             END OF    ygs_gfile    .
    *Internal table declaration for input file as text
    gt_gfile   TYPE STANDARD TABLE OF ygs_gfile  INITIAL SIZE 0 ,
    *Work area declaration for input file
           gs_gfile   TYPE ygs_gfile                                   .
    Thanks and Regards
    A Swarna

  • Download Text file to Local drive from BSP Application

    Hi Guys,
    I am new to BSP, and I am doing a BSP application in which i want to download a text file to local drive C: on click of button. For that I am having a data in Internal table and Onclick event, in model class method DO_HANDLE_EVENT i want to download text file to local machine drive.
    Can anybody provide me full code with all data declaration and all?
    Your help would be appriciable. Thanks in Advance.

    Hi Jessy ,
    You can download the file from BSP pages using the method
    CL_BSP_UTILITY=>download.
    Please follow the below mentioned steps.
    1.Convert the text to a text table ie Internal table with a line type char255 or some others.
    2.Convert the text table into a string.
    3.Convert the string to XSTRING.
    4.Download that XSTRING as text file using the method
       CL_BSP_UTILITY=>download.
    Parameters:
    OBJECT_S    - XSTRING data
    CONTENT_TYPE  =  ' application/download'
    CONTENT_DISPOSITION = 'attachment; file=test.txt'
    RESPONSE                   = runtime->server->response
    NAVIGATION                   = navigation
    OBJECT_T
    I dont have system to give a programatical explanation to u.
    If you have any doubt kindly post.
    Reward for every useful solutions..
    Best Regards
    Renga

  • How to upload the files

    how to upload the files from javascipt.can any body send the code for that.

    You can't upload files with Javascript, that would be a huge security hole. At highest you can use Javascript to submit a form with a file field, but the user still have to select the file himself.

  • How to upload multiple files using wicket

    Hai,
    how to upload multiple files using wicket at a single browse.
    any suggestion?
    Thanks in advance

    You have to do this your self by either (as vinod said) using a different component (not present in adf) or implementing this:
    1) allow the user to select multiple filenames (somehow)
    2) zip them together
    3) upload the zip
    4) unpack the zip on the server
    5) work with the files
    Timo

Maybe you are looking for