How to upload data for me01 using LSMW BDC METHOD

*hi export please tell me the complete procedure for uploading data in me01 using LSMW BDC METHOD*
Moderator message: please search for available information/documentation.
Edited by: Thomas Zloch on May 8, 2011 10:06 PM

Hi,
To be honest I don't understand your question. When You execute LSMW and create project, then all steps are shown in a very clear way with good description. With which one you have problems?
Best regards
Marcin Cholewczuk

Similar Messages

  • How to upload data for me01 using lsmw recording method

    *dear expert please tell me the complete procedure for how to upload data in me01 transaction using lsmw recording method.
    Moderator Message: Duplicate post locked.
    Edited by: Vinod Kumar on May 8, 2011 7:56 PM

    Hi,
    To be honest I don't understand your question. When You execute LSMW and create project, then all steps are shown in a very clear way with good description. With which one you have problems?
    Best regards
    Marcin Cholewczuk

  • How to upload data into IT0000 using ABAP-HR program

    Hello,
    I'm required to upload data into multiple infotypes [IT000, 0001, 0002, etc] using single input text file. Can anyone able to guide me, how to upload data into IT0000 using ABAP program ?
    Thanks in advance.
    Regards
    Prabhakar.
    Message was edited by:
            Prabhakara Muthyal

    Example code for HR_MAINTAIN_MASTERDATA to COPY IT0002
    DATA: INT_0002_FINAL TYPE STANDARD TABLE OF PA0002 WITH HEADER LINE.
    DATA: VALUES        LIKE PPROP OCCURS 10 WITH HEADER LINE,
    RETURN        LIKE BAPIRETURN1,.
    LOOP AT INT_0002_FINAL.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-PERNR'.
          VALUES-FVAL  = INT_0002_FINAL-PERNR.
          APPEND VALUES.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-BEGDA'.
          VALUES-FVAL  = INT_0002_FINAL-BEGDA.
          APPEND VALUES.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-ENDDA'.
          VALUES-FVAL  = INT_0002_FINAL-ENDDA.
          APPEND VALUES.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-nachn'.
          VALUES-FVAL  = INT_0002_FINAL-NACHN.
          APPEND VALUES.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-gblnd'.
          VALUES-FVAL  = INT_0002_FINAL-GBLND.
          APPEND VALUES.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-vorna'.
          VALUES-FVAL  = INT_0002_FINAL-VORNA.
          APPEND VALUES.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-rufnm'.
          VALUES-FVAL  = INT_0002_FINAL-RUFNM.
          APPEND VALUES.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-name2'.
          VALUES-FVAL  = INT_0002_FINAL-NAME2.
          APPEND VALUES.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-inits'.
          VALUES-FVAL  = INT_0002_FINAL-INITS.
          APPEND VALUES.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-famst'.
          VALUES-FVAL  = INT_0002_FINAL-FAMST.
          APPEND VALUES.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-gbdat'.
          VALUES-FVAL  = INT_0002_FINAL-GBDAT.
          APPEND VALUES.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-sprsl'.
          VALUES-FVAL  = INT_0002_FINAL-SPRSL.
          APPEND VALUES.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-anzkd'.
          VALUES-FVAL  = INT_0002_FINAL-ANZKD.
          APPEND VALUES.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-natio'.
          VALUES-FVAL  = INT_0002_FINAL-NATIO.
          APPEND VALUES.
    * maintain master data
          CALL FUNCTION 'HR_MAINTAIN_MASTERDATA'
            EXPORTING
              PERNR           = INT_0002_FINAL-PERNR
              ACTIO           = 'COP'
              BEGDA           = INT_0002_FINAL-BEGDA
    *         ENDDA           = INT_0002_FINAL-ENDDA
              SUBTY           = SPACE
              NO_ENQUEUE      = SPACE
              DIALOG_MODE        = '0'
              TCLAS              = 'A'
            IMPORTING
              RETURN1         = RETURN
            TABLES
              PROPOSED_VALUES = VALUES
    *         MODIFIED_KEYS   =
            EXCEPTIONS
              OTHERS          = 1.
          IF RETURN IS INITIAL.
            WRITE:/' Done....'.
          ELSE.
            WRITE:/   RETURN-ID, RETURN-TYPE, RETURN-NUMBER, RETURN-MESSAGE_V1, RETURN-MESSAGE_V2, RETURN-MESSAGE_V3, RETURN-MESSAGE_V4.
          ENDIF.
          CLEAR VALUES.
          REFRESH VALUES.
        ENDLOOP.

  • How to upload datas in excel sheet through BDC

    Hi,
        I know how to upload datas in Text format  through BDC...Suppose even when datas are in .xls format,I saved that file as Text(tab delimited) format...then file become text format and it can be easily uploaded....
        So, I want to know How to upload datas in excel sheet through BDC

    hi,
    try this Example, hope useful to u, assign me point.
    report ZMSV1_BDC_CALL
           no standard page heading line-size 255.
    *include bdcrecx1.
    *parameters: dataset(132) lower case.
       DO NOT CHANGE - the generated data section - DO NOT CHANGE    ***
      If it is nessesary to change the data section use the rules:
      1.) Each definition of a field exists of two lines
      2.) The first line shows exactly the comment
          '* data element: ' followed with the data element
          which describes the field.
          If you don't have a data element use the
          comment without a data element name
      3.) The second line shows the fieldname of the
          structure, the fieldname must consist of
          a fieldname and optional the character '_' and
          three numbers and the field length in brackets
      4.) Each field must be type C.
    Generated data section with specific formatting - DO NOT CHANGE  ***
    data: begin of record,
    data element: BUKRS
            BUKRS_001(004),
    data element: KTOKK
            KTOKK_002(004),
    data element: NAME1_GP
            NAME1_003(035),
    data element: SORTL
            SORTL_004(010),
    data element: ORT01_GP
            ORT01_005(035),
    data element: LAND1_GP
            LAND1_006(003),
    data element: SPRAS
            SPRAS_007(002),
    data element: BANKS
            BANKS_01_008(003),
    data element: BANKK
            BANKL_01_009(015),
    data element: BANKN
            BANKN_01_010(018),
          end of record.
    End generated data section ***
    data: itab like record occurs 0 .
    data: it_bdc type bdcdata occurs 0 with header line.
    data: it_msg type bdcmsgcoll occurs 0 with header line.
    parameter p_file type rlgrap-filename default 'c:\vendor.txt' obligatory
    start-of-selection.
    perform open_dataset using p_file.
    perform open_group.
    *perform close_group.
    *perform close_dataset using dataset.
    *&      Form  open_dataset
          text
         -->P_P_FILE  text
    form open_dataset  using    p_p_file.
    CALL FUNCTION 'WS_UPLOAD'
    EXPORTING
      CODEPAGE                      = ' '
      FILENAME                      = p_file
      FILETYPE                      = 'DAT'
      HEADLEN                       = ' '
      LINE_EXIT                     = ' '
      TRUNCLEN                      = ' '
      USER_FORM                     = ' '
      USER_PROG                     = ' '
      DAT_D_FORMAT                  = ' '
    IMPORTING
      FILELENGTH                    =
      TABLES
        data_tab                      = itab
    EXCEPTIONS
      CONVERSION_ERROR              = 1
      FILE_OPEN_ERROR               = 2
      FILE_READ_ERROR               = 3
      INVALID_TYPE                  = 4
      NO_BATCH                      = 5
      UNKNOWN_ERROR                 = 6
      INVALID_TABLE_WIDTH           = 7
      GUI_REFUSE_FILETRANSFER       = 8
      CUSTOMER_ERROR                = 9
      NO_AUTHORITY                  = 10
      OTHERS                        = 11
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    endform.                    " open_dataset
    *&      Form  open_group
          text
    -->  p1        text
    <--  p2        text
    form open_group .
    loop at itab into record.
    perform bdc_dynpro      using 'SAPMF02K' '0105'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RF02K-KTOKK'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'RF02K-BUKRS'
                                  record-BUKRS_001.
    perform bdc_field       using 'RF02K-KTOKK'
                                  record-KTOKK_002.
    perform bdc_dynpro      using 'SAPMF02K' '0110'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'LFA1-ORT01'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'LFA1-NAME1'
                                  record-NAME1_003.
    perform bdc_field       using 'LFA1-SORTL'
                                  record-SORTL_004.
    perform bdc_field       using 'LFA1-ORT01'
                                  record-ORT01_005.
    perform bdc_field       using 'LFA1-LAND1'
                                  record-LAND1_006.
    perform bdc_field       using 'LFA1-SPRAS'
                                  record-SPRAS_007.
    perform bdc_dynpro      using 'SAPMF02K' '0120'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'LFA1-KUNNR'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_dynpro      using 'SAPMF02K' '0130'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'LFBK-KOINH(01)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=ENTR'.
    perform bdc_field       using 'LFBK-BANKS(01)'
                                  record-BANKS_01_008.
    perform bdc_field       using 'LFBK-BANKL(01)'
                                  record-BANKL_01_009.
    perform bdc_field       using 'LFBK-BANKN(01)'
                                  record-BANKN_01_010.
    perform bdc_dynpro      using 'SAPMF02K' '0130'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'LFBK-BANKS(01)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=ENTR'.
    perform bdc_dynpro      using 'SAPMF02K' '0210'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'LFB1-AKONT'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_dynpro      using 'SAPMF02K' '0215'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'LFB1-ZTERM'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_dynpro      using 'SAPMF02K' '0220'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'LFB5-MAHNA'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_dynpro      using 'SAPLSPO1' '0300'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=YES'.
    call transaction 'FK01' using it_bdc mode 'A' update 'S'
                                 messages into it_msg.
      write:/ sy-subrc.
        perform message_formatwrite.
    refresh it_bdc.
    clear it_bdc.
    endloop.
    endform.                    " open_group
    *&      Form  message_formatwrite
          text
    -->  p1        text
    <--  p2        text
    form message_formatwrite .
    data:l_msg(10).
    loop at it_msg.
    CALL FUNCTION 'FORMAT_MESSAGE'
    EXPORTING
       ID              = SY-MSGID
       LANG            = sy-langu
       NO              = SY-MSGNO
       V1              = SY-MSGV1
       V2              = SY-MSGV2
       V3              = SY-MSGV3
       V4              = SY-MSGV4
    IMPORTING
       MSG             = l_msg
    EXCEPTIONS
       NOT_FOUND       = 1
       OTHERS          = 2
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    endloop.
    endform.                    " message_formatwrite
    *&      Form  bdc_dynpro
          text
         -->P_0112   text
         -->P_0113   text
    form bdc_dynpro  using    value(p_0112)
                              value(p_0113).
    it_bdc-program = p_0112.
      it_bdc-dynpro = p_0113.
      it_bdc-dynbegin = 'X'.
      append it_bdc.
      clear it_bdc.
    endform.                    " bdc_dynpro
    *&      Form  bdc_field
          text
         -->P_0117   text
         -->P_0118   text
    form bdc_field  using    value(p_0117)
                             value(p_0118).
    it_bdc-fnam = p_0117.
      it_bdc-fval = p_0118.
      append it_bdc.
      clear it_bdc.
    endform.                    " bdc_field
    Regards
    fareedas

  • How to upload data for custom infotype

    Hi  Friends
    Can we use HR_INFOTYPE_OPERATIONS   FM  for custom infotype too  or is there other way or other Standard FM to upload data for custom infotype  starting with 9000..etc.
    Points will be there for sure.
    Thanks
    Meeta & Roopa

    Thanks for quick response.
    my qns is can we use Standard FM like HR_INFOTYPE_OPERATIONS  for custom infotype too ?
    in my requirment  input will come from portal form and in background  Java Wd is going to use these FM  but i have this big  doubt can we use these standard FM for  uploading data in custom infotype as well or else is there any other way.. but for sure we can't use BDC and LSMW in this requirement .
    Thanks Meeta & Roopa

  • How to upload data into CRM using batch job

    Hello,
    I got some problem and need some hints.
    I am uploading data from a flat text file (product data) into CRM using thefunction module GUI_UPLOAD. My program starts with a selection screen whereI enter the path and the filename of the program, then I click start, and
    the data is transferred in CRM. This works perfect, and I can automaticallycreate service products in CRM.
    Here comes the PROB:
    But now I want to automize this procedure using a batch job that automatically picks up the file from the server and processes it automatically without any user interaction. BUT I always get an error saying that my function module GUI_UPLOAD can't run in batch mode. So
    anyone has an idea how to do this? Any other function modules that can run in batch mode? Any other ideas?
    Thx very much for ur help on this.

    Hi Bill,
    GUI_UPLOAD, like the name says, uses the SAPGUI to upload the data to theserver.. and in a batch job, you don't have the connection to a SAPGUI.
    So you should use following kind of coding:
    DATA MSG(100).
    OPEN DATASET "FILENAM" FOR INPUT IN TEXT MODE ENCODING DEFAULT MESSAGE
    MSG.
    IF sy-subrc = 0.
    DO.
    READ DATASET "FILENAM" INTO [Your internal table].
    IF sy-subrc <> 0.
    EXIT.
    ENDIF.
    APPEND [Your internal table]P_DATA.
    ENDDO.
    ENDIF.
    The file should then be available on the server.
    Regards

  • Can any body tell me how to upload data for infotype 2011

    hi gurus,
    please tell me hw to create the bdc for infotype 2011.

    Go to SHDB and record the Tcode PA30 with Infotype 2011.
    ~BiSu

  • BDC Program for Uploading Data for Property Tree in cg02

    Hi,
        How to upload data for property tree ( standard Properties ) of CG02. I checked for BAPI or Function Module but most them supports for specification header and sub item. 
    Please Let me know if any function module or BAPI available for this process.  I tried with BDC Program, but it fails.
    Regards,
    Rajesh Kumar Murugesan

    Hallo Rajesh
    take a look here:
    http://help.sap.com/erp2005_ehp_06/helpdata/en/c1/eda0f591ec12408b25e7a1b369ca45/frameset.htm
    Chapter "Import and Export".
    1.)  Reads cross these further chapters:
    "Tools (EHS-BD-TLS)" => "IMport and Export" => "Import: Process" => "Specifying the Sequence of the External Data Structure "  => "External File Structure: Specification"
    Here you will learn how to prepare the data. In chapter:" Example: Transfer File for Specifications" you will find an example of an file whcih could be used to upload data in the property tree
    2.) Chapter:" Importing Specifications"  is explaining the steps whcih are need to populate the property with data using the file as prepared; read cross chapter "Specification Import Control"
    I hope this helps.
    C.B.
    Edited by: Christoph Bergemann on Feb 4, 2012 6:59 PM
    Edited by: Christoph Bergemann on Feb 4, 2012 6:59 PM

  • Upload Purchase info Records using LSMW

    Hi,
      Im uploading purchase info records using LSMW - direct method
    Object               0060   Purchasing info rec.
    Method               0000
    Program Name         RM06IBI0
    i need step by step process for this. any one have done this using this program help me out.
    Regards,
    Vimal

    Hello Jürgen
    and thank you!
    One additional question: When I import info records using LSMW, one condition record (PB00) is created automatically. Is it possible to change the validity of that condition record using LSMW, too? Or can I only create new condition records?
    Thanks again
    Alicia

  • Uploading data through scat using without files

    if we are uploading data for J1IS using BDC, Values are not getting updated.
    so we are trying to upoad it using SCAT.
    what are the steps to f

    Hello Member,
    This thread is locked since it does not adhere to rules of engagement. Please go through rules of engagement before you post any threads in here.
    Thanks and Kind Regards
    Mohan
    eCATT forum Moderator

  • How to upload data into Classification-MM02 for each MATNR By using BAPI

    Hi all
          How to upload data into characterstic value in  classification- MM02 for each MATNR by using BAPI.

    Hi Siva,
    Please try BAPI BAPI_OBJCL_CHANGE.
    The object key should be material number and object table should be MARA.
    Regards
    Hiren K.Chitalia

  • Customized LSMW (Batch Input Recording) to upload data for Vendor

    Hello Fiends,
       can u help me on this object and how to upload in xk01.
            Customized LSMW (Batch Input Recording) to upload data for Vendor Master using Transaction code XK01
    With best wishes,
    Chandu.
    Point will be rewarded....

    Hi,
    Go through the following link, you will find your answer
    http://www.sapbrain.com
    Regards,
    Bhaskar

  • How to upload data from excel to SAP and options to be used

    How to upload data from excel to SAP and options to be used
    thank you,
    Regards,
    Jagrut Bharatkumar shukla

    Hi Jagrut,
        You can use gui_upload.
    chk the sample program mentioned below.
    REPORT ZFTP .
    DATA: BEGIN OF I_FILE OCCURS 0,
    DATA(2000) TYPE C,
    END OF I_FILE.
    DATA: BEGIN OF I_FILE2 OCCURS 0,
    DATA(2000) TYPE C,
    END OF I_FILE2.
    DATA: W_COUNT TYPE I.
    PARAMETERS: P_FILEN TYPE STRING,
    P_FILE2 TYPE STRING,
    P_NUM(4) TYPE N..
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILEN.
    PERFORM F_FILE_GET USING P_FILEN TEXT-G01.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE2.
    PERFORM F_FILE_GET USING P_FILE2 TEXT-G01.
    START-OF-SELECTION.
    CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
    filename = P_FILEN
    FILETYPE = 'ASC'
    HAS_FIELD_SEPARATOR = 'X'
    HEADER_LENGTH = 0
    READ_BY_LINE = 'X'
    DAT_MODE = ' '
    CODEPAGE = ' '
    IGNORE_CERR = ABAP_TRUE
    REPLACEMENT = '#'
    CHECK_BOM = ' '
    VIRUS_SCAN_PROFILE =
    NO_AUTH_CHECK = ' '
    IMPORTING
    FILELENGTH =
    HEADER =
    tables
    data_tab = I_FILE
    IF SY-SUBRC <> 0.
    MESSAGE E024(Z1).
    ENDIF.
    LOOP AT I_FILE.
    W_COUNT = W_COUNT + 1.
    IF NOT W_COUNT > P_NUM.
    MOVE I_FILE TO I_FILE2.
    APPEND I_FILE2.
    ENDIF.
    ENDLOOP.
    CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
    BIN_FILESIZE =
    filename = P_FILE2
    FILETYPE = 'ASC'
    APPEND = ' '
    WRITE_FIELD_SEPARATOR = 'X'
    HEADER = '00'
    TRUNC_TRAILING_BLANKS = ' '
    WRITE_LF = 'X'
    COL_SELECT = ' '
    COL_SELECT_MASK = ' '
    DAT_MODE = ' '
    CONFIRM_OVERWRITE = ' '
    NO_AUTH_CHECK = ' '
    CODEPAGE = ' '
    IGNORE_CERR = ABAP_TRUE
    REPLACEMENT = '#'
    WRITE_BOM = ' '
    TRUNC_TRAILING_BLANKS_EOL = 'X'
    WK1_N_FORMAT = ' '
    WK1_N_SIZE = ' '
    WK1_T_FORMAT = ' '
    WK1_T_SIZE = ' '
    IMPORTING
    FILELENGTH =
    tables
    data_tab = I_FILE2
    FIELDNAMES =
    *& Form F_FILE_GET
    text
    -->P_P_FILEN text
    -->P_TEXT_G01 text
    FORM F_FILE_GET USING L_FILENA L_TEXT.
    CALL FUNCTION 'WS_FILENAME_GET'
    EXPORTING
    DEF_FILENAME = ' '
    DEF_PATH = ' '
    MASK = ',.,*.TXT.'
    MODE = 'O'
    TITLE = L_TEXT
    IMPORTING
    FILENAME = L_FILENA
    rc =
    EXCEPTIONS
    INV_WINSYS = 1
    NO_BATCH = 2
    SELECTION_CANCEL = 3
    SELECTION_ERROR = 4
    OTHERS = 5
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Reward if helpful.
    Regards,
    Harini.S

  • Problem with uploading data from excel using BDC for tcode f-02

    Hi All,
    I am uploading data from excel using BDC for tcode f-02. The problem here is, while recording, the values of some fields are recording twice. I dont know why it's happening so. But if I run my abap program, I have to give those fields twice in my excel sheet. Otherwise data does not upload. But it is not the feasible way. We must give those fields once in excel. Please tell me, how I can solve the issue.
    With regards,
    Rosaline.

    Hi,
      in BDC each and every action is recording. If your press enter in same screen that also recorded once aging may be this is your case repeating field values will appear. we can solve the problem for repeat fields like below.
    suppose in your excel having repeated field X1 X2 X3 the X2 contains repeated field X3 means delete the X3 field.
    Now In your itab having X1 and X2 fields. While in the LOOP the ITAB pass the X2 field to repeated the fields.
    LOOP at ITAB to WA.
    CLEAR bdcdata_wa.
    bdcdata_wa-fnam = 'BDC_CURSOR'.
    bdcdata_wa-fval = 'RM08M-EBELN'.
    APPEND bdcdata_wa TO bdcdata_tab.
    CLEAR bdcdata_wa.
    bdcdata_wa-fnam = 'INVFO-BLDAT'.
    bdcdata_wa-fval = wa-X2." 1st time pass the X2 fields
    APPEND bdcdata_wa TO bdcdata_tab.
    CLEAR bdcdata_wa.
    bdcdata_wa-fnam = 'INVFO-BLDAT'.
    bdcdata_wa-fval = wa-X2." pass the same value to repeated field
    APPEND bdcdata_wa TO bdcdata_tab.
    Endloop.
    Hope you can understand.
    Regards,
    Dhina..

  • How to upload data into form of Oracle EBS R12 using ATS ver 9.0

    Hi experts,
    Could you please guide me how to upload data into form on Oracle EBS R12 using Oracle Application Testing Suite verson 9.(The simpliest way)
    For example: I need to create user account on Oracle EBS. Normally, I use Dataloader to upload the data, however it just can upload one by one record, cannot upload multi record at same time. Moreover if the performance of server is low, so I will get the issue when using dataloader.
    Thanks in advance
    Best Regards
    Hieu

    Hi you can create Virtual users to enter data. Note than you have to name the objects accordingly.
    For Example default recording provided by Open script is ObjectNAME_(Index No of the object).
    when you record one iteration the name of any object would be ObjectNAME_(0)
    You can then create virtual users so the index will increment as the total number of Virtual users increases. Also you have to handle which row of your test data would get mapped to which Virtual user in the script run session.
    Thanks

Maybe you are looking for

  • Oracle 9i Installation : svrmgr missing

    Hello, I downloaded Oracle 9i database from OTN. After installation I wanted to create a database since I had not ticked on any pre- defined databases which Oracle had supplied. When I ran command svrmgr I was stumped to find that it came with error.

  • Receivables - Query of Customers, sorted by Payment Terms?

    I'm looking for an easy way to run a query (through the Applications layer) of all customers, sorted by their Payment Terms (Net 30, Net 45, etc.) Any ideas?

  • ABAP for Java Developers

    Hi, I'm a Java developer that developed some Java Web Dynpro for my company. Unfortunately my boss said to me that we don't have work to do on Java Web Dynpros and told me to learn ABAP Web Dynpros. Is there any resource or quick reference for Java P

  • O-Portal behind reverse proxy, aliasing of o-portal url to generic url.

    I'd like to setup o-Portal behind a reverse proxy. This is a proxy service which accepts connections on http://a.b.com/ and gets the content from internal webservers based on the url. For example http://a.b.com/pls/DAD1 comes from an o-Portal server

  • Mozilla Screen resolution

    Installed the vmware evaluation kit and everything seems okay except the screen resolution of the Mozilla Browser is awful and is virtually unreadable. Linux desktop, KDE Control centre screens etc.. are all perfect and readable, it is just Mozilla.