How to upload data with dynamic internal table

Hi,
I have to upload the basic , sales, purchasing view data by using bapi depend on check box selected for views.
i have filled fieldcatalog for selected views and pass the field catalog structure to dynamic int table and
import it into the field symbol <fs_data>. this field symbol assigned to <fs_1>.
then callED the 'GUI_UPLOAD '  and  when i pass field symbo for function module i am getting first 10 rows 0f the file .
flat file has basic data,sales ,purchase fields data
ex: i was selected basicview and purchase view and execute i am getting basic,sales view data.
how can i get only basic and purchase data.

hi ,
please find code.
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog           = lt_fieldcatalog
    IMPORTING
      ep_table                  = <fs_data>
    EXCEPTIONS
      generate_subpool_dir_full = 1
      OTHERS                    = 2.
  IF sy-subrc <> 0.                                         "#EC NEEDED
  ENDIF.
So <FS_1> now points to our dynamic internal table.
  ASSIGN <fs_data>->* TO <fs_1>.
Next step is to create a work area for our dynamic internal table.
  CREATE DATA new_line LIKE LINE OF <fs_1>.
A field-symbol to access that work area
  ASSIGN new_line->*  TO <fs_2>.
  ASSIGN new_line->*  TO <fs_3>.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename                = p_f
      filetype                = 'DAT'
    TABLES
      data_tab                = <fs_1>
    EXCEPTIONS
      file_open_error         = 1
      file_read_error         = 2
      no_batch                = 3
      gui_refuse_filetransfer = 4
      invalid_type            = 5
      no_authority            = 6
      unknown_error           = 7
      bad_data_format         = 8
      header_not_allowed      = 9
      separator_not_allowed   = 10
      header_too_long         = 11
      unknown_dp_error        = 12
      access_denied           = 13
      dp_out_of_memory        = 14
      disk_full               = 15
      dp_timeout              = 16
      OTHERS                  = 17.
  IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
      WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
  ENDIF.

Similar Messages

  • How to populate data in dynamic internal table

    Hi Expert,
    fyi. My dynamic internal table field is created base on data selected. Eg. select table qpcd has 5 records.  These 5 recods will become fieldname to my dynamic internal table. My dynamic internal table will be
    ...itab
          01
          02
          03
          04
          05
    The 5 records from qpcd is populated in another table call viqmel.  I need to find the occurance of each code in viqmel and populate the number of occurance in itab in each of column.  The final dynamic itab will be like this
    table itab
    01       02     03    04     05   -
    > field name
    2         0        1     0       1    -
    > data
    my source code like below
    Report ZPLYGRND2.
    TABLES: mara, makt.
    TYPE-POOLS: slis, sydes.
    DATA:it_fcat TYPE slis_t_fieldcat_alv,
         is_fcat LIKE LINE OF it_fcat,
         ls_layout TYPE slis_layout_alv.
    DATA: it_fieldcat TYPE lvc_t_fcat,
          is_fieldcat LIKE LINE OF it_fieldcat.
    DATA: new_table TYPE REF TO data,
          new_line TYPE REF TO data,
          ob_cont_alv TYPE REF TO cl_gui_custom_container,
          ob_alv TYPE REF TO cl_gui_alv_grid,
          vg_campos(255) TYPE c,
          i_campos LIKE TABLE OF vg_campos,
          vg_campo(30) TYPE c,
          vg_tables(60) TYPE c.
    types : begin of t_qpcd,
             codegruppe like qpcd-codegruppe,
             code like qpcd-code,
            end of t_qpcd.
    data:wa_qpcd type t_qpcd,
         i_qpcd type standard table of t_qpcd initial size 0.
    FIELD-SYMBOLS: <l_table> TYPE table,
                   <l_line> TYPE ANY,
                   <l_field> TYPE ANY.
    select * into corresponding fields of wa_qpcd from qpcd
    where katalogart = 'D'
    and   codegruppe = 'OOT01'.
    append wa_qpcd to i_qpcd.
    endselect.
    loop at i_qpcd into wa_qpcd.
      is_fcat-fieldname = wa_qpcd-code.
      APPEND is_fcat TO it_fcat.
    endloop.
    LOOP AT it_fcat INTO is_fcat.
        is_fieldcat-fieldname = is_fcat-fieldname.
        is_fieldcat-ref_field = is_fcat-ref_fieldname.
        is_fieldcat-ref_table = is_fcat-ref_tabname.
        APPEND is_fieldcat TO it_fieldcat.
    ENDLOOP.
    *... Create the dynamic internal table
    CALL METHOD cl_alv_table_create=>create_dynamic_table
        EXPORTING
            it_fieldcatalog = it_fieldcat
        IMPORTING
            ep_table = new_table.
    if sy-subrc = 0.
    endif.
    *... Create a new line
    ASSIGN new_table->* TO <l_table>.
    CREATE DATA new_line LIKE LINE OF <l_table>.
    ASSIGN new_line->* TO <l_line>.
    LOOP AT <l_table> INTO <l_line>.
    ENDLOOP.

    hello dear i m giving u a code in this a dynamic table is made on the basis of table in database , and u can download this data correct it , see it, or even change it....and upload in tht table help full if u dont know the table name...in advance.
    also the code to populate data in dynamic table is in this code like:
    SELECT * FROM (MTABLE_N)
    INTO CORRESPONDING FIELDS OF TABLE <FS_ITAB> .
    look at the whole program .hope this solve ur problem thanks.
    REPORT ZTESTA  MESSAGE-ID ZIMM    .
    TYPES : DATA_OBJECT TYPE REF TO DATA.
    DATA : MITAB TYPE REF TO DATA .
    TYPE-POOLS : SLIS .
    DATA : IT_FIELDCAT TYPE STANDARD TABLE OF SLIS_FIELDCAT_ALV
    WITH HEADER LINE .
    DATA : IT_FIELDCATALOG TYPE LVC_T_FCAT .
    DATA : WA_FIELDCATALOG TYPE LVC_S_FCAT .
    DATA : I_STRUCTURE_NAME LIKE DD02L-TABNAME .
    DATA : I_CALLBACK_PROGRAM LIKE SY-REPID .
    DATA : DYN_LINE TYPE DATA_OBJECT .
    FIELD-SYMBOLS : <FS_ITAB> TYPE STANDARD TABLE .
    DATA : TABLE_NAME_IS_VALID TYPE C .
    DATA : DYNAMIC_IT_INSTANTIATED TYPE C .
    CONSTANTS BUTTONSELECTED TYPE C VALUE 'X' .
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 5(29) T_TABL.
    PARAMETERS : MTABLE_N LIKE RSRD1-TBMA_VAL
    MATCHCODE OBJECT DD_DBTB_16 OBLIGATORY .
    DATA CHECKTABLED.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 5(29) T_FILE.
    PARAMETERS : MFILENAM LIKE RLGRAP-FILENAME .
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 5(29) T_DOWN.
    PARAMETERS : P_DOWNLD RADIOBUTTON GROUP GRP1
    USER-COMMAND M_UCOMM .
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 5(29) T_CHKF.
    PARAMETERS : P_CHKFIL RADIOBUTTON GROUP GRP1 .
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 5(29) T_UPLD.
    PARAMETERS : P_UPLOAD RADIOBUTTON GROUP GRP1 .
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 5(29) T_SHOW.
    PARAMETERS : P_SHOW_T RADIOBUTTON GROUP GRP1 .
    SELECTION-SCREEN END OF LINE.
    AT SELECTION-SCREEN OUTPUT .
      PERFORM CHECK_FILENAME .
    AT SELECTION-SCREEN.
      IF SY-UCOMM = 'ONLI'.
        CHECKTABLED = MTABLE_N+0(1).
        IF CHECKTABLED NE 'Z'.
          MESSAGE I017.
          LEAVE TO SCREEN 1000.
        ENDIF.
        IF SY-UNAME NE 'KAMESH.K'.
          MESSAGE I023 WITH SY-UNAME.
          LEAVE TO SCREEN 1000.
        ENDIF.
      ENDIF.
      IF SY-UCOMM = 'PRIN'.
        CHECKTABLED = MTABLE_N+0(1).
        IF CHECKTABLED NE 'Z'.
          MESSAGE I017.
          LEAVE TO SCREEN 1000.
        ENDIF.
        IF SY-UNAME NE 'KAMESH.K'.
          MESSAGE I023 WITH SY-UNAME.
          LEAVE TO SCREEN 1000.
        ENDIF.
      ENDIF.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR MFILENAM .
      PERFORM F4_FOR_FILENAME .
    INITIALIZATION .
      T_TABL = 'Table Name' .
      T_FILE = 'File Name' .
      T_DOWN = 'Download Table' .
      T_CHKF = 'Check File to Upload' .
      T_UPLD = 'Upload File' .
      T_SHOW = 'Show Table Contents' .
    START-OF-SELECTION .
      PERFORM CHECK_TABLE_NAME_IS_VALID .
    END-OF-SELECTION .
      IF TABLE_NAME_IS_VALID EQ ' ' .
        MESSAGE I398(00) WITH 'INVALID TABLE NAME' .
      ELSE .
        PERFORM INSTANTIATE_DYNAMIC_INTERNAL_T .
        CHECK DYNAMIC_IT_INSTANTIATED = 'X' .
        CASE BUTTONSELECTED .
          WHEN P_DOWNLD .
            PERFORM SELECT_AND_DOWNLOAD .
          WHEN P_CHKFIL .
            PERFORM CHECK_FILE_TO_UPLOAD .
          WHEN P_UPLOAD .
            PERFORM UPLOAD_FROM_FILE .
          WHEN P_SHOW_T .
            PERFORM SHOW_CONTENTS .
        ENDCASE .
      ENDIF .
    FORM CHECK_TABLE_NAME_IS_VALID.
      DATA MCOUNT TYPE I .
      TABLES DD02L .
      CLEAR TABLE_NAME_IS_VALID .
      SELECT COUNT(*) INTO MCOUNT FROM TADIR
      WHERE PGMID = 'R3TR'
      AND OBJECT = 'TABL'
      AND OBJ_NAME = MTABLE_N .
      IF MCOUNT EQ 1 .
        CLEAR DD02L .
        SELECT SINGLE * FROM DD02L WHERE TABNAME = MTABLE_N .
        IF SY-SUBRC EQ 0.
          IF DD02L-TABCLASS = 'TRANSP' .
            TABLE_NAME_IS_VALID = 'X' .
          ENDIF .
        ENDIF.
      ENDIF .
    ENDFORM. " CHECK_TABLE_NAME_IS_VALID
    FORM SELECT_AND_DOWNLOAD.
      CLEAR : <FS_ITAB> .
      SELECT * FROM (MTABLE_N)
      INTO CORRESPONDING FIELDS OF TABLE <FS_ITAB> .
      PERFORM CHECK_FILENAME.
      CALL FUNCTION 'WS_DOWNLOAD'
           EXPORTING
                FILENAME                = MFILENAM
                FILETYPE                = 'DAT'
           TABLES
                DATA_TAB                = <FS_ITAB>
           EXCEPTIONS
                FILE_OPEN_ERROR         = 1
                FILE_WRITE_ERROR        = 2
                INVALID_FILESIZE        = 3
                INVALID_TYPE            = 4
                NO_BATCH                = 5
                UNKNOWN_ERROR           = 6
                INVALID_TABLE_WIDTH     = 7
                GUI_REFUSE_FILETRANSFER = 8
                CUSTOMER_ERROR          = 9
                OTHERS                  = 10.
      IF SY-SUBRC EQ 0.
        MESSAGE I398(00) WITH 'Table' MTABLE_N
        'successfully downloaded to '
        MFILENAM .
      ENDIF.
    ENDFORM. " SELECT_AND_DOWNLOAD
    FORM UPLOAD_FROM_FILE.
      DATA : ANS TYPE C .
      DATA : LINES_OF_ITAB TYPE I .
      DATA : MSY_SUBRC TYPE I .
      CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
           EXPORTING
                TEXTLINE1 = 'Are you sure you wish to upload'
                TEXTLINE2 = 'data from ASCII File to DB table '
                TITEL     = 'Confirmation of Data Upload'
           IMPORTING
                ANSWER    = ANS.
      IF ANS = 'J' .
        PERFORM CHECK_FILENAME.
        CLEAR MSY_SUBRC .
        CALL FUNCTION 'WS_UPLOAD'
             EXPORTING
                  FILENAME                = MFILENAM
                  FILETYPE                = 'DAT'
             TABLES
                  DATA_TAB                = <FS_ITAB>
             EXCEPTIONS
                  CONVERSION_ERROR        = 1
                  FILE_OPEN_ERROR         = 2
                  FILE_READ_ERROR         = 3
                  INVALID_TYPE            = 4
                  NO_BATCH                = 5
                  UNKNOWN_ERROR           = 6
                  INVALID_TABLE_WIDTH     = 7
                  GUI_REFUSE_FILETRANSFER = 8
                  CUSTOMER_ERROR          = 9
                  OTHERS                  = 10.
        MSY_SUBRC = MSY_SUBRC + SY-SUBRC .
        IF SY-SUBRC EQ 0.
          DESCRIBE TABLE <FS_ITAB> LINES LINES_OF_ITAB .
          IF LINES_OF_ITAB GT 0 .
            MODIFY (MTABLE_N) FROM TABLE <FS_ITAB> .
            MSY_SUBRC = MSY_SUBRC + SY-SUBRC .
          ENDIF .
        ENDIF.
        IF MSY_SUBRC EQ 0 .
          MESSAGE I398(00) WITH LINES_OF_ITAB
          'Record(s) inserted in table'
          MTABLE_N .
        ELSE .
          MESSAGE I398(00) WITH
          'Errors occurred No Records inserted in table'
          MTABLE_N .
        ENDIF .
      ENDIF .
    ENDFORM. " UPLOAD_FROM_FILE
    FORM F4_FOR_FILENAME.
      CALL FUNCTION 'WS_FILENAME_GET'
           EXPORTING
                DEF_PATH         = 'C:\'
                MASK             = ',.,..'
                MODE             = '0'
           IMPORTING
                FILENAME         = MFILENAM
           EXCEPTIONS
                INV_WINSYS       = 1
                NO_BATCH         = 2
                SELECTION_CANCEL = 3
                SELECTION_ERROR  = 4
                OTHERS           = 5.
    ENDFORM. " F4_FOR_FILENAME
    FORM CHECK_FILENAME.
      IF MFILENAM IS INITIAL
      AND NOT ( MTABLE_N IS INITIAL )
      AND P_SHOW_T NE BUTTONSELECTED.
        CONCATENATE 'C:\'
        MTABLE_N '.TXT' INTO MFILENAM.
      ENDIF .
    ENDFORM. " CHECK_FILENAME
    FORM INSTANTIATE_DYNAMIC_INTERNAL_T.
      CLEAR DYNAMIC_IT_INSTANTIATED .
      I_STRUCTURE_NAME = MTABLE_N .
      CLEAR IT_FIELDCAT[] .
      CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
           EXPORTING
                I_STRUCTURE_NAME       = I_STRUCTURE_NAME
           CHANGING
                CT_FIELDCAT            = IT_FIELDCAT[]
           EXCEPTIONS
                INCONSISTENT_INTERFACE = 1
                PROGRAM_ERROR          = 2
                OTHERS                 = 3.
      IF SY-SUBRC EQ 0.
        LOOP AT IT_FIELDCAT .
          CLEAR WA_FIELDCATALOG .
          MOVE-CORRESPONDING IT_FIELDCAT TO WA_FIELDCATALOG .
          WA_FIELDCATALOG-REF_FIELD = IT_FIELDCAT-FIELDNAME .
          WA_FIELDCATALOG-REF_TABLE = MTABLE_N .
          APPEND WA_FIELDCATALOG TO IT_FIELDCATALOG .
        ENDLOOP .
        CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
        EXPORTING
        IT_FIELDCATALOG = IT_FIELDCATALOG
        IMPORTING
        EP_TABLE = MITAB .
        ASSIGN MITAB->* TO <FS_ITAB> .
        DYNAMIC_IT_INSTANTIATED = 'X' .
      ENDIF.
    ENDFORM. " INSTANTIATE_DYNAMIC_INTERNAL_T
    FORM SHOW_CONTENTS.
      CLEAR : <FS_ITAB> .
      SELECT * FROM (MTABLE_N)
      INTO CORRESPONDING FIELDS OF TABLE <FS_ITAB> .
      I_CALLBACK_PROGRAM = SY-REPID .
      CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
           EXPORTING
                I_CALLBACK_PROGRAM = I_CALLBACK_PROGRAM
                IT_FIELDCAT        = IT_FIELDCAT[]
           TABLES
                T_OUTTAB           = <FS_ITAB>
           EXCEPTIONS
                PROGRAM_ERROR      = 1
                OTHERS             = 2.
    ENDFORM. " SHOW_CONTENTS
    FORM CHECK_FILE_TO_UPLOAD.
      PERFORM CHECK_FILENAME.
      CALL FUNCTION 'WS_UPLOAD'
           EXPORTING
                FILENAME                = MFILENAM
                FILETYPE                = 'DAT'
           TABLES
                DATA_TAB                = <FS_ITAB>
           EXCEPTIONS
                CONVERSION_ERROR        = 1
                FILE_OPEN_ERROR         = 2
                FILE_READ_ERROR         = 3
                INVALID_TYPE            = 4
                NO_BATCH                = 5
                UNKNOWN_ERROR           = 6
                INVALID_TABLE_WIDTH     = 7
                GUI_REFUSE_FILETRANSFER = 8
                CUSTOMER_ERROR          = 9
                OTHERS                  = 10.
      IF SY-SUBRC EQ 0.
        I_CALLBACK_PROGRAM = SY-REPID .
        CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
             EXPORTING
                  I_CALLBACK_PROGRAM = I_CALLBACK_PROGRAM
                  IT_FIELDCAT        = IT_FIELDCAT[]
             TABLES
                  T_OUTTAB           = <FS_ITAB>
             EXCEPTIONS
                  PROGRAM_ERROR      = 1
                  OTHERS             = 2.
      ENDIF .
    ENDFORM. " CHECK_FILE_TO_UPLOAD
    Message was edited by:
            SAURABH SINGH
            SENIOR EXECUTIVE
            SAMSUNG INDIA ELECTRONICS LTD.,NOIDA

  • How to delete data from dynamic internal table

    Hi,
    I have dynamic internal table and I have some slection screen fields , using these selection screen fields
    (select -options), I have to filter the data? assigning will work with READ , but I have select options not the parametre,
    and also delete will not work for dynamic table..
    as we cannot use assigning with delete..
    So how to do this?
    and one more thing is , I cannot filter the data while selection( in select, I cannot filter the data-> as it's not coming directly from table, it's coming from buffer),
    so now after selection of data, I need to filter the data from dynamic table.
    Is there any way to do this?
    Regards,
    Mrunal

    Hi matt,
    I tried with below code as  you said. But I am getting dump. can you help?
    here is my piece of code.
    FIELD-SYMBOLS: <LS_DATA> type any,
                               <LT_DATA> TYPE table,
                                <L_FIELD> type any.
        ASSIGN <l_buffer_entry>-dataptr->* TO <LS_DATA>.
        ASSIGN <l_buffer_entry>-dataptr->* TO <LT_DATA>.
    LOOP AT <LT_DATA> ASSIGNING <LS_DATA>.
    ASSIGN COMPONENT 'BUKRS' OF STRUCTURE <LS_DATA> TO <L_FIELD>.
    IF <L_FIELD> NOT IN SO_BUKRS.
    DELETE <LT_DATA>.
    ENDIF.
    UNASSIGN <L_FIELD>.
    ASSIGN COMPONENT 'BELNR' OF STRUCTURE <LS_DATA> TO <L_FIELD>.
    IF <L_FIELD> NOT IN SO_BELNR.
    DELETE <LT_DATA>.
    ENDIF.
    UNASSIGN <L_FIELD>.
    ENDLOOP.
    and here is the description of my dump:->>>
    You attempted to access an unassigned field symbol
    (data segment 32772).
    This error may occur for any of the following reasons:
    - You address a typed field symbol before it is set using ASSIGN
    - You address a field symbol that points to a line in an internal table
      that has been deleted
    - You address a field symbol that had previously been reset using
      UNASSIGN, or that pointed to a local field that no longer exists
    - You address a global function interface parameter, even
      though the relevant function module is not active,
      that is it is not in the list of active calls. You can get the list
      of active calls from the this short dump.

  • How to populate data into Dynamic Internal Table.

    Hi Experts,
    I had created one Dynamic Internal table and one static internal table.I want to move data from Static Internal table to Dynamic interal table.And aslo the number of coloum of these two tables are not same.
    So please help me for solving this issue.
    Thanks,
    <u><i><b>Seema.</b></i></u>

    Hi,
    Check out this sample program for dynamictable report.
    REPORT  YMS_DYNAMICDEMO
                 NO STANDARD PAGE HEADING
                 MESSAGE-ID zcs_c2c_001.
    type-pools : abap.
    field-symbols: <dyn_table> type standard table,
                   <dyn_wa>,
                   <dyn_field>.
    data: dy_table type ref to data,
          dy_line  type ref to data,
          xfc type lvc_s_fcat,
          ifc type lvc_t_fcat.
    selection-screen begin of block b1 with frame.
    parameters: p_table(30) type c default 'T001'.
    selection-screen end of block b1.
    start-of-selection.
      perform get_structure.
      perform create_dynamic_itab.
      perform get_data.
      perform write_out.
    form get_structure.
    data : idetails type abap_compdescr_tab,
           xdetails type abap_compdescr.
    data : ref_table_des type ref to cl_abap_structdescr.
    Get the structure of the table.
      ref_table_des ?=
          cl_abap_typedescr=>describe_by_name( p_table ).
      idetails[] = ref_table_des->components[].
      loop at idetails into xdetails.
        clear xfc.
        xfc-fieldname = xdetails-name .
        xfc-datatype = xdetails-type_kind.
        xfc-intlen = xdetails-length.
        xfc-decimals = xdetails-decimals.
        append xfc to ifc.
      endloop.
    endform.
    form create_dynamic_itab.
    Create dynamic internal table and assign to FS
      call method cl_alv_table_create=>create_dynamic_table
                   exporting
                      it_fieldcatalog = ifc
                   importing
                      ep_table        = dy_table.
      assign dy_table->* to <dyn_table>.
    Create dynamic work area and assign to FS
      create data dy_line like line of <dyn_table>.
      assign dy_line->* to <dyn_wa>.
    endform.
    form get_data.
    Select Data from table.
      select * into table <dyn_table>
                 from (p_table).
    endform.
    form write_out.
    Write out data from table.
      loop at <dyn_table> into <dyn_wa>.
        do.
          assign component  sy-index
             of structure <dyn_wa> to <dyn_field>.
          if sy-subrc <> 0.
            exit.
          endif.
          if sy-index = 1.
            write:/ <dyn_field>.
          else.
            write: <dyn_field>.
          endif.
        enddo.
      endloop.
    endform.
    Thanks,
    Shankar

  • How to pass data from dynamic internal table to standard internal table

    hi experts,
    below is the piece of code which i have used in my requirement but the data is not moved.
    LOOP AT <tab> ASSIGNING <tab1>.
      MOVE-CORRESPONDING <tab1> TO wa.
      append wa TO  gt_outtab.
    ENDLOOP.
    here
    <tab> - dynamic internal table.
    <tab1>-dynamic internal table work area.
    gt_outtab - standard internal table.
    wa- standard internal table work area.
    i am not getting what additional thing i have to write.
    pls help me in this regard.
    thankx in advance.
    soham.p.

    Hello soham p ,
    I am also using the same logic but in my program it is working fine so you declare the fieldsymols like this and try and also check the dynamic internal contain the data or not.
    FIELD-SYMBOLS : <y_i_table>  TYPE STANDARD TABLE,
                                 <y_wa_table> TYPE ANY.
      LOOP AT <y_i_table> ASSIGNING <y_wa_table>.
        MOVE-CORRESPONDING <y_wa_table> TO y_wa_vfscaid.
        APPEND y_wa_vfscaid TO y_i_vfscaid.
        CLEAR y_wa_vfscaid.
      ENDLOOP.

  • Upload data to an internal table with Services of the Table Tool

    Hi,
    I'm trying to upload data to an internal table with the table with the new abap debugger but I can see the option in Services of the Table Tool. I see the information in this sap link and also I saw some screen shot in other pages.
    http://help.sap.com/saphelp_nw70ehp2/helpdata/en/49/2db60934e414d0e10000000a42189b/content.htm
    Is this option depends the SAP version or the patch version or I need to configure the debugger?

    Hi,
    I used the statement
    SPLIT i_file AT '|' INTO TABLE It_file.
    But it is overwriting each row but not appending to the internal table while passing do and enddo.
    Actually my requirement is download the pipe delimited text file and sent an XLS attachment to the
    distribution mail id's.
    I know sending the mails by using the FM.
    But I need all data from the file line by line and pass to the Mail sending function module.
    Can you help me in acheiving  this.
    Regards
    Jay

  • How to delete records from dynamic internal table.

    Hi Experts,
    Need urgent help!!!
    Issue is with Dynamic internal tables.
    Below is code written by me :
    FORM select_query USING Lw_tabnam
                      TYPE  t682i-kotabnr.
      DATA :  lw_line  TYPE REF TO data,
              lw_line1 TYPE REF TO data.
        CREATE DATA Lw_line    TYPE (lw_TABNAM).
        ASSIGN      Lw_line->* TO   <WA_tbl>.
        CREATE DATA LW_LINE    TYPE STANDARD TABLE OF (Lw_tabnam)
                               WITH NON-UNIQUE DEFAULT KEY.
        ASSIGN      Lw_line->* TO <TBL>.
        SELECT * FROM  (Lw_tabnam)
                 INTO CORRESPONDING FIELDS OF TABLE <TBL>
                 WHERE (t_keys).
    Endform.
    code is working fine.
    here even the table name and where condition are dynamic,everything is fine upto this point.
    Now i have to delete some record from <TBL> based on some conditons.
         for ex : ( here lc_fieldname is KUNNR)
          loop at t_kunnr.
              lw_tabix = sy-tabix.
            Read table <tbl>
                    with key (lc_fieldname) = t_kunnr-kunnr ASSIGNING <wa_tbl>.
            If sy-subrc = 0.
            *Delete
            delete <tbl> from <wa_tbl>
    delete <tbl> index  lw_tabix.
            Endif.
         Endloop.
    The above delete statement doesn't work ,even we can't use index as it gives a syntax error " something related to "index is not allowed in standard table or hash table.
    Can you help me ab't how to delete records in Dynamic internal table?
    Other option that i am thinking of is to create a static table of type dynamic table.
    means, data itab type standard table of <tbl> .I know the syntax is wrong ,however is there any way to do this?
    Thanks in advance ,
    If you have any suggestion ab't this then do let me know.
    bye,
    Gaurav.

    Hi
    I wrote this code and it works fine:
    DATA LW_TABNAM(10) VALUE 'LFA1'.
    DATA : LW_LINES TYPE REF TO DATA,
           LW_LINE  TYPE REF TO DATA.
    FIELD-SYMBOLS: <TABLE> TYPE TABLE,
                   <WA>    TYPE ANY.
    CREATE DATA LW_LINES TYPE TABLE OF (LW_TABNAM)
    WITH NON-UNIQUE DEFAULT KEY.
    ASSIGN LW_LINES->* TO <TABLE>.
    CREATE DATA LW_LINE TYPE (LW_TABNAM).
    ASSIGN LW_LINE->* TO <WA>.
    DO 10 TIMES.
      APPEND INITIAL LINE TO <TABLE>.
    ENDDO.
    SY-TABIX = 4.
    DELETE <TABLE> INDEX SY-TABIX.
    WRITE SY-SUBRC.
    I hope it help you
    Max

  • Using where condition with dynamic internal table

    Hi Friends.
    How to use where condition with dynamic internal table ?
    Regards,
    Amit Raut

    Hai Amit
    REPORT  ZDYNAMIC_SELECT                         .
    TABLES: VBAK.
    DATA: CONDITION TYPE STRING.
    DATA: BEGIN OF ITAB OCCURS 0,
    VBELN LIKE VBAK-VBELN,
    POSNR LIKE VBAP-POSNR,
    END OF ITAB.
    SELECT-OPTIONS: S_VBELN FOR VBAK-VBELN.
    CONCATENATE 'VBELN' 'IN' 'S_VBELN.'
    INTO CONDITION SEPARATED BY SPACE.
    SELECT VBELN POSNR FROM VBAP INTO TABLE ITAB
    WHERE (CONDITION).
    LOOP AT ITAB.
    WRITE 'hello'.
    ENDLOOP.
    Thanks & Regards
    Sreenivasulu P

  • How to read data from an internal table into a real table?

    Hello experts,
    I'm relatively new to ABAP and I'm trying to figure out how to read data from an internal table into a table that I created.  I'm trying to use the RRW3_GET_QUERY_VIEW_DATA function module to read data from a multiprovider.  I'm trying to read data from the e_cell_data and e_axis_data tables into a table that I've already created.  Please see code below.
    TABLES MULTITAB.
    DATA:
      query_name TYPE RSZCOMPID,
      s_cubename TYPE RSINFOPROV,
      t_cell_data TYPE RRWS_T_CELL,
      t_axis_data TYPE RRWS_THX_AXIS_DATA,
      t_axis_info TYPE RRWS_THX_AXIS_INFO,
      wa_t_cell_data like line of t_cell_data,
      wa_t_axis_data like line of t_axis_data,
      w_corp_tab like line of t_cell_data.
    s_cubename = 'CORP_MPO1'.
    query_name = 'Z_corp_test'.
        CALL FUNCTION 'RRW3_GET_QUERY_VIEW_DATA'
           EXPORTING
             i_infoprovider           = s_cubename
             i_query                  = query_name
            i_t_parameter            = query_string_tab
           IMPORTING
             e_cell_data              = t_cell_data
             e_axis_data              = t_axis_data
             e_axis_info              = t_axis_info.
    If anyone has any information to help me, I would greatly appreciate it.  Thanks.

    Hi,
    <li>Once you call the function module RRW3_GET_QUERY_VIEW_DATA, lets say data is available in the corresponding tables e_cell_data e_axis_data which you have mentioned.
    <li>Modify your internal table defined for other purpose, with data from e_cell_data e_axis_data like below.
    LOOP AT t_cell_data INTO wa_t_cell_data.
      "Get the required data from t_cell_data.
      MOVE-CORRESPONDING wa_t_cell_data TO it_ur_tab.
      "Modify your internal table wih data
      MODIFY it_ur_tab TRANSPORTING <field1> <field2> <field3>.
    ENDLOOP.
    LOOP AT t_axis_data INTO wa_t_axis_data.
      "Get the required data from t_cell_data.
      MOVE-CORRESPONDING wa_t_axis_data TO it_ur_tab.
      "Modify your internal table wih data
      MODIFY it_ur_tab TRANSPORTING <field1> <field2> <field3>.
    ENDLOOP.
    Thanks
    Venkat.O

  • How to move data from 2 internal table to 1 internal table

    Can any body send me code that how to move data from 2 internal table into one internal table.
    Moderator message : Read ABAP documentation. Thread locked.
    Edited by: Vinod Kumar on Jun 13, 2011 11:45 AM

    Hi Mohdarif92;
    I don't know your full needs. But general method should be as below code.
    Please check exam below code.
    Best regards.
    data : begin of gt_result.
                ... like mkpf-...
                ... like mkpf-...
                ... like mseg-...
                ... like mseg-...
              end of gt_result
    select *
    into table gt_mkpf
    from mkpf where ...
    select *
    into table mseg
    from mseg where ...
    loop at gt_mkpf.
         loop at gt_mseg where ... = mkpf-...
            move-corresponding gt_mkpf to gt_result.
            move-corresponding gt_mseg to gt_result.
            append gt_result
         endloop.
    endloop.

  • How to do parallel processing with dynamic internal table

    Hi All,
    I need to implement parallel processing that involves dynamically created internal tables. I tried doing so using RFC function modules (using starting new task and other such methods) but didn't get success this requires RFC enabled function modules and at the same time RFC enabled function modules do not allow generic data type (STANDARD TABLE) which is needed for passing dynamic internal tables. My exact requirement is as follows:
    1. I've large chunk of data in two internal tables, one of them is formed dynamically and hence it's structure is not known at the time of coding.
    2. This data has to be processed together to generate another internal table, whose structure is pre-defined. But this data processing is taking very long time as the number of records are close to a million.
    3. I need to divide the dynamic internal table into (say) 1000 records each and pass to a function module and submit it to run in another task. Many such tasks will be executed in parallel.
    4. The function module running in parallel can insert the processed data into a database table and the main program can access it from there.
    Unfortunately, due to the limitation of not allowing generic data types in RFC, I'm unable to do this. Does anyone has any idea how to implement parallel processing using dynamic internal tables in these type of conditions.
    Any help will be highly appreciated.
    Thanks and regards,
    Ashin

    try the below code...
      DATA: w_subrc TYPE sy-subrc.
      DATA: w_infty(5) TYPE  c.
      data: w_string type string.
      FIELD-SYMBOLS: <f1> TYPE table.
      FIELD-SYMBOLS: <f1_wa> TYPE ANY.
      DATA: ref_tab TYPE REF TO data.
      CONCATENATE 'P' infty INTO w_infty.
      CREATE DATA ref_tab TYPE STANDARD TABLE OF (w_infty).
      ASSIGN ref_tab->* TO <f1>.
    * Create dynamic work area
      CREATE DATA ref_tab TYPE (w_infty).
      ASSIGN ref_tab->* TO <f1_wa>.
      IF begda IS INITIAL.
        begda = '18000101'.
      ENDIF.
      IF endda IS INITIAL.
        endda = '99991231'.
      ENDIF.
      CALL FUNCTION 'HR_READ_INFOTYPE'
        EXPORTING
          pernr           = pernr
          infty           = infty
          begda           = '18000101'
          endda           = '99991231'
        IMPORTING
          subrc           = w_subrc
        TABLES
          infty_tab       = <f1>
        EXCEPTIONS
          infty_not_found = 1
          OTHERS          = 2.
      IF sy-subrc <> 0.
        subrc = w_subrc.
      ELSE.
      ENDIF.

  • Working with dynamic internal tables

    Hi,
    I've created dynamic internal table and then assigned it to field symbol structure.
    This is part of the code.
    wa_tab  = cl_abap_structdescr=>create( comp_tab ).
      i_tab   = cl_abap_tabledescr=>create( wa_tab ).
      create data i_table type handle i_tab.
      assign i_table->* to <f_tab1>.
    As a second step I am populationg that structure <f_tab1> with data using dynamic select:
    select (sel_list) from (p_table)
            into table <f_tab1>
            up to p_row rows.
    So far so good but I need to copy the data from <f_tab1> into internal table with the same structure and to use that internal table on a later stage as a driver table in select...for all entries.
    How can I doo that ?
    Thanks,
    Stefan
    <Code tags added>
    Edited by: Suhas Saha on Oct 27, 2011 4:23 PM

    Hello Stefan,
    You might be interested in reading this thread How to use dynamic internal table with FOR ALL ENTRIES.
    Do let us know if you find any alternative solution
    Cheers,
    Suhas

  • Populate data in dynamic internal table

    Hi ppl,
    I have a requirement where I need to display certain fields in the report output.
    The output contains 8 fixed fields (common for all rows in output) and some dynamic fields (number of column varies with rows) which will be determined at runtime.
    I am able to create the dunamic internal table....and at runtime I see the fields created in the internal table correctly.
    Now my requirement is to fill this table with the data from 2 internal tables.
    The values for the 8 common fields comes from the internal table t_output and the values for dynamic fields come from t_dynamic.
    Please let me know the logic to merge these 2 internal tables into the dynamic internal table <dyn_table>.
    Regards.

    Hello David,
    This has been discussed many times before in this forum. Since the table structure is dynamic the fields are determined at runtime.
    To assign data to this table you have to use [ASSIGN COMPONENT ... |http://help.sap.com/abapdocu_70/en/ABAPASSIGN_MEM_AREA_DYNAMIC_DOBJ.htm#!ABAP_ALTERNATIVE_4@4@] variant.
    Please refer to the example provided in the documentation for details.
    BR,
    Suhas

  • How  to copy data from one internal table to another

    i am using some function module to get some data for my function module
    and the retrieved data is not getting populated in mu fumctional module
    i am sucessful in getting the data to an internal table in my function module but dont know how to pass it to my table parameter
    thanks in advance

    Hi Naval,
    Declare an internal table of type table parameter structure and pass it the table parameters of the Function module.
    Check the code for this function module.
    DATA IT_MARA LIKE MARA OCCURS 0 WITH HEADER LINE.
    SELECT * FROM MARA UP TO 10 ROWS INTO TABLE IT_MARA.
      CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
          FILENAME                = 'C:\TEST.TXT'.      FILETYPE                = 'ASC'
          WRITE_FIELD_SEPARATOR   = 'X'
    <b>    TABLES
          DATA_TAB                = IT_MARA</b>
        EXCEPTIONS
          FILE_WRITE_ERROR        = 1
          NO_BATCH                = 2
          GUI_REFUSE_FILETRANSFER = 3
          INVALID_TYPE            = 4
          NO_AUTHORITY            = 5
          UNKNOWN_ERROR           = 6
          HEADER_NOT_ALLOWED      = 7
          SEPARATOR_NOT_ALLOWED   = 8
          FILESIZE_NOT_ALLOWED    = 9
          HEADER_TOO_LONG         = 10
          DP_ERROR_CREATE         = 11
          DP_ERROR_SEND           = 12
          DP_ERROR_WRITE          = 13
          UNKNOWN_DP_ERROR        = 14
          ACCESS_DENIED           = 15
          DP_OUT_OF_MEMORY        = 16
          DISK_FULL               = 17
          DP_TIMEOUT              = 18
          FILE_NOT_FOUND          = 19
          DATAPROVIDER_EXCEPTION  = 20
          CONTROL_FLUSH_ERROR     = 21
          OTHERS                  = 22.
      IF SY-SUBRC <> 0.
            MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    Thanks,
    Vinay

  • How to scan data from one internal table to another

    Hi All,
    let me know how to scan all from one internal table to another internal table. Pls provide me the syntax and code.
    i am very thankful to you all in advance.
    Thanks & Regards,
    Nagarjuna.

    if u want to copy data from itab1 to itab2  then use
    itab2[] = itab1[].
    if u want to compare whether both itab1 and itab2 are same or not,use
    if itab1[] = itab2[].
    *--same
    else.
    *--not same
    endif.
    if u want to compare itabs based on primary key....
    loop at itab1.
    read table itab2 with key f1 = itab1-f1.
    if sy-subrc <> 0.
    *--not same....
    endif.
    endloop.
    if u want to copy only few lines(say from 1 to 3) of itab1 to itab2 then use...
    append lines of itab1 from 1 to 3 to itab2.
    if internal tables don't have same structure,
    say only fields f1 and f2 are common,then
    loop at itab1.
    itab2-f1 = itab1-f1.
    itab2-f2 = itab1-f2.
    append itab2.
    clear itab2.
    endloop.
    if there are many common fields then...
    loop at itab1.
    move-corresponding itab1 to itab2.
    append itab2.
    clear itab2.
    endloop.
    Please don't forget to reward points....!!!
    Regards
    vasu

Maybe you are looking for