How to upload the data from existing ods to new cube?

Hi all,
There is an existing ods and reports are been created for that ods. My task is to create a cube and pull out the data from the ods to cube.
I have created a cube with update rule. And i want to know to how to load all the data from the existing ods to the newly created cube.
thanxs
haritha

Hi haritha,
If you've already created the update-rules, try to create cube, than make a mapping between ODS & Cube.
If done,
1. Right-Click on ODS, find the menu update data to data target.
2. Choose for Init.
If you wanna make it update data to cube automatically, then you must setup the setting in ODS.
1. double-click on it.
2. In setting, you'll see the option for "automatically update data to data target".
3. Choose for it.
Hopefully it can help you a lot.
Regards,
Niel.
thanks for any points you choose to assign.

Similar Messages

  • How to upload the data from excel(3 tabs) file to sap environment

    Hi all,
    This is Mahesh.
    how to upload the data from excel(3 tabs) file to sap environment (internal tables) while doing bdc.

    Hi,
    The FM 'ALSM_EXCEL_TO_INTERNAL_TABLE' makes it possible to load a worksheet into an internal table in ABAP.
    However, if you want to get the data from several worksheets, I think you are stuck with OLE access to your Excel Workbook...
    You can find a solution for 2 worksheets in this post :
    TO UPLOAD DATA FROM 2 EXCEL SHEETS INTO TWO INTERNAL TABLES
    I think you can easily modify it to handle any number of worksheets.
    Hope it helps !
    Best regards,
    Guillaume

  • How to upload the data from two sheets in one excel into SAP

    Hi experts,
                    My requirement is to upload the data from two sheets in an excel into an internal table.How can this be achieved.Is some OLE application has to be used?
    Thanks
    Abhishek

    Hi
    see this program will upload excel file to application.
    *& Report  ZSD_EXCEL2
    REPORT  ZSD_EXCEL2.
    types: begin of ttab ,
          fld1(30) type c,
          fld2(30) type c,
          fld3(30) type c,
          fld4(30) type c,
          fld5(30) type c,
          end of ttab.
    data: itab type table of ttab with header line.
    selection-screen skip 1.
    parameters: p_file type localfile default
                'C:\test.xls'.
    selection-screen skip 1.
    at selection-screen on value-request for p_file.
      call function 'KD_GET_FILENAME_ON_F4'
           exporting
                static    = 'X'
           changing
                file_name = p_file.
    start-of-selection.
      clear itab. refresh itab.
      perform upload_data.
      loop at itab.
        write:/ itab-fld1, itab-fld2, itab-fld3, itab-fld4, itab-fld5.
      endloop.
    * Upload_Data
    form upload_data.
      data: file type  rlgrap-filename.
      data: xcel type table of alsmex_tabline with header line.
      file = p_file.
      call function 'ALSM_EXCEL_TO_INTERNAL_TABLE'
           exporting
                filename                = file
                i_begin_col             = '1'
                i_begin_row             = '1'
                i_end_col               = '200'
                i_end_row               = '5000'
           tables
                intern                  = xcel
           exceptions
                inconsistent_parameters = 1
                upload_ole              = 2
                others                  = 3.
      loop at xcel.
        case xcel-col.
          when '0001'.
            itab-fld1 = xcel-value.
          when '0002'.
            itab-fld2 = xcel-value.
          when '0003'.
            itab-fld3 = xcel-value.
          when '0004'.
            itab-fld4 = xcel-value.
          when '0005'.
            itab-fld5 = xcel-value.
        endcase.
        at end of row.
          append itab.
          clear itab.
        endat.
      endloop.
    endform.

  • How to create a form which has browse option ? Then how to upload the data from the excel file to table in Oracle DB?

    Hi Everyone,
    I am new to Oracle forms. I have a requirement where user wants a form which can be used to browse a excel file from his/her system. Also after browsing the file the user should be able to load the data from the file to a table in the Oracle DB.
    Any help pointers would be appreciated.
    Thanks,
    Satya
    Message was edited by: user12098633

    Hi Marcus,
    I am using EBS (E- Business Suite) ERP and version is 11.5.10.2
    My database version is as below
    Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
    PL/SQL Release 11.2.0.3.0 - Production
    CORE
    11.2.0.3.0
    Production
    TNS for IBM/AIX RISC System/6000: Version 11.2.0.3.0 - Production
    NLSRTL Version 11.2.0.3.0 - Production
    I want to move csv file via EBS only. Average size of this will be max 600-700 bytes.
    Program should be in pl/sql package or concurrent program or custom .fmb (d2k forms) or custom .rdf (d2k report) or through alert. I am not using samba.

  • How to upload the data from legacy system database to SAP data base

    Hi.
    We are doing analysis of Legacy system and which needs to be converted to SAP system i.e. SAP implementation.
    I just want to know , how we migrate the existing whole data( from legacy system) into SAP system.
    and which method is the best method to use data migration from legacy to SAP system if data legacy data amount is huge.
    Please suggest me.
    Thanks.

    Hi
    We can either use the BDC or BAPI or LSMW  or Direct Input techiniques for the data transfers.
    The combination of both Session and Call transaction can be used to achieve this that includes the error handling also. This invloves the screen interaction.
    These days, BAPIs are used to overvome some upgrade problems. For easy upgradation, we cna go for BAPIs. Here ther is no screen intercation.
    LSMW mainly used for master data transfers using some standrad programs.
    As per your client or company desicions  we can choose any of them.
    Please refer to these links for more understanding -
    BDC Vs LSMW -
    BDC VS LSMW
    BDC Vs BAPI -
    BDC VS LSMW
    Thanks & Regards,
    Chandralekha.

  • How to upload the data from XML file to SAP database using IDOC

    Hi,
    I need some steps  to upload  data from XML format file from other directory to SAP database using IDOC.
    how to approch this please if any one knows give me ans
    it will be a great help ful to me
    Thanks in Advance
    Mallik

    Thank you vijay,
    But i heard that by using this Fun modules, when we are passing IDOC in back ground schedule,  so some other depended FM not supporting, so how to approach this and how to avoid this problem. 
    Have you worked on this before if any one worked on this please help me out
    And thank you once again for your valuable information
    Best Regards
    Mallik

  • How to upload the file from website into R/3

    Dear Experts,
              I want to post the data in r/3 using bdc.but flat file is available in some website for eg.'www.sap.com'.how to retrieve the flat file from the website and how to upload the data from website to r/3.
    It is very urgent please help me.
    Thanks & Regards,
    Ashok.

    Hi Ashok,
        We cannot directly pulled data from website. we need to activate webservices and rfcs. Better you could asked to your Basis guy that he knows or not. If not then do sdn you will get the appropriate answer. I can only say that its possible and we can download from website.
    Regds,
    Rakesh

  • Uploading the data from excel to sap R/3

    Hi Guys,
         Actually i know how to upload the data from text file to sap.when ever i come to excel file while calling 'ALSM_EXCEL_TO_INTERNAL_TABLE' FM I AM NOT ABLE TO HANDLE THE PARAMETERS .
       How can we handle this thing.Plz give me the example code.
    Regards,
    Venkat.

    HI,
    Check this code..
    DATA l_count TYPE sy-tabix.
       CONSTANTS: lc_begin_col TYPE i VALUE '1',
                  lc_begin_row TYPE i VALUE '2',
                  lc_end_col   TYPE i VALUE '2',
                  lc_end_row   TYPE i VALUE '3000'.
    * Begin of CALK912848 - Carlos Werberich - 16Sep08
      CLEAR p_i_excel_data. REFRESH p_i_excel_data.
    * End   of CALK912848 - Carlos Werberich - 16Sep08
    * Function module to read excel file and convert it into internal table
       CALL FUNCTION 'KCD_EXCEL_OLE_TO_INT_CONVERT'
         EXPORTING
           filename                = p_p_file
           i_begin_col             = lc_begin_col
           i_begin_row             = lc_begin_row
           i_end_col               = lc_end_col
           i_end_row               = lc_end_row
         TABLES
           intern                  = i_data
         EXCEPTIONS
           inconsistent_parameters = 1
           upload_ole              = 2
           OTHERS                  = 3.
    * Error in file upload
       IF sy-subrc NE 0 .
         MESSAGE text-006 TYPE 'E'.
         EXIT.
       ENDIF.
       IF i_data[] IS INITIAL .
         MESSAGE text-007 TYPE 'E'.
         EXIT.
       ELSE.
         SORT i_data BY row col .
    * Loop to fill data in Internal Table
         LOOP AT i_data .
           MOVE i_data-col TO l_count .
           ASSIGN COMPONENT l_count OF STRUCTURE p_i_excel_data TO <fs_source> .
           MOVE i_data-value TO <fs_source> .
           AT END OF row .
    * Append data into internal table
             APPEND p_i_excel_data.
             CLEAR p_i_excel_data.
           ENDAT .
         ENDLOOP .
       ENDIF .

  • Uploading the data from a flat file into ztable

    Hi,
    I have a requirement where I have to upload the data from 2 flat files into 2 z tables(ZRB_HDR,ZRB_ITM).From the 1st flat file only data for few fields have to be uploaded into ztable(ZRB_HRD) .Fromthe 2nd flat file data for all the fields have to me uploaded into ztable(ZRB_ITM). How can I do this?
    Regards,
    Hema

    hi,
    declare two internal table with structur of your tables.
    your flat files should be .txt files.
    now make use of GUI_UPLOAD function module to upload your flatfile into internal tables.
    CALL FUNCTION 'GUI_UPLOAD'
        EXPORTING
          filename            = 'c:\file1.txt'
          has_field_separator = 'X'
        TABLES
          data_tab            = itab1
        EXCEPTIONS
          OTHERS              = 1.
    use this function twice for two tables.
    then loop them individually and make use of insert command.

  • How  to load the data from excel  file  into table in oracle using UTL_FI

    How to load the data from excel file into table in oracle
    and from table to excel file
    using UTL_FILE package
    Please give me some example

    This is something i tried in oracle apex
    http://avdeo.com/2008/05/21/uploading-excel-sheet-using-oracle-application-express-apex/
    Regards,
    CKLP

  • How to  upload Transaction data from source system to BI 7.0

    Dear friends,
    I want to know how to  upload Transaction data from source system to BI 7.0.
    if anybody having step by step material for this process ,please send it to my
    mail id.
    [email protected]
    [email protected]
    Thanks,
    D.prabhu

    Hi,
    it works in the same way as before in case you are not using the new features like the dtp and the transformations. Using the new features, you schedule a infopackage to load the data up to psa and schedule a dtp to post the data to the targets.
    regards
    Siggi
    PS: We want to share knowledge in sdn and not keeping it private by having the information sent to our email adresses.

  • How to pass the data from a input table to RFC data service?

    Hi,
    I am doing a prototype with VC, I'm wondering how VC pass the data from a table view to a backend data service? For example, I have one RFC in the backend system with a tabel type importing parameter, now I want to pass all the data from an input table view to the RFC, I guess it's possible but I don't know how to do it.
    I try to create some events between the input table and data service, but seems there is no a system event can export the whole table to the backend data service.
    Thanks for your answer.

    Thanks for your answer, I tried the solution 2, I create "Submit" button, and ser the mapping scope to  be "All data rows", it only works when I select at least one row, otherwise the data would not be passed.
    Another question is I have serveral imported table parameter, for each table I have one "submit" event, I want these tables to be submitted at the same time, but if I click the submit button in one table toolbar, I can only submit the table data which has a submit button clicked, for other tables, the data is not passed, how can I achieve it?
    Thanks.

  • How to select the data from a Maintainance View into an internal table

    Hi All,
    Can anybody tell me how to select the data from a Maintainance View into an internal table.
    Thanks,
    srinivas.

    HI,
    You can not retrieve data from A mentenance view.
    For detail check this link,
    http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
    Regards,
    Anirban

  • How to get the data from multiple nodes to one table

    Hi All,
    How to get the data from multiple nodes to one table.examples nodes are like  A B C D E relation also maintained
    Regards,
    Indra

    HI Indra,
    From Node A, get the values of the attributes as
    lo_NodeA->GET_STATIC_ATTRIBUTES(  IMPORTING STATIC_ATTRIBUTES = ls_attributesA  ).
    Similarily get all the node values from B, C, D and E.
    Finally append all your ls records to the table.
    Hope you are clear.
    BR,
    RAM.

  • How to get the data from pcl2 cluster for TCRT table.

    Hi frndz,
    How to get the data from pcl2 cluster for tcrt table for us payroll.
    Thanks in advance.
    Harisumanth.Ch

    PL take a look at the sample Program EXAMPLE_PNP_GET_PAYROLL in your system. There are numerous other ways to read payroll results.. Pl use the search forum option & you sure will get a lot of hits..
    ~Suresh

Maybe you are looking for