How to use 2 Airport Extreme Units on a Network?

I currently have an Airport Extreme (AX) as my wireless host with internet connectivity, with an Airport Express also on the network to extend the range of coverage.
These past Holidays “Santa” delivered a new Mac Book Pro, along with a Time Machine which is built into an Airport Extreme. I am planning to install this to replace my current (less than 1 year old) existing AX. All of which begs the question as to what to do with the AX that I replace. Obviously selling it as a pre-loved item is an option. But are there other uses that I could put this AX to on my wireless network?
I currently have 2 PC’s and now 2 Mac’s on the network, plus 2 wireless printer / scanners, and our 2 i-Phones have access to the network also.
Thanks, Bruce.

Welcome to the discussions!
+These past Holidays “Santa” delivered a new Mac Book Pro, along with a Time Machine which is built into an Airport Extreme.+
You have a Time Capsule, correct?
The Time Capsule can "extend a wireless network" as well as perform backup functions on the network.
You could continue to use your AirPort Express in another part of the house to provide a stronger wireless signal in that area. (I've yet to meet the first person who felt that they had too much wireless coverage in their home).
If you have a DVR or newer DVD player that requires an ethernet connection for advanced features from the internet, the ethernet port on the Express is "live" when it is set to "extend", so you might think about that option as well.
Hotels don't use ethernet nearly as much as several years ago, but I always take my spare Express on the road to hook up to the hotel's ethernet jack and create a wireless network in the room for the laptop or iPhone. Works great.

Similar Messages

  • How to use 2 Airport Express units?

    In my office upstairs I use an AirPort Express to tap into the wireless router downstairs wirelessly. Works great. In a bedroom also upstairs, I have a Blu Ray player I want to connect to the Internet. I thought if I got another AirPort Express unit in that Bedroom then it too could tap into the wireless router downstairs so I could then run an ethernet cable from the AirPort Express to the BluRay player. I tried that but when I look on my computer in the AirPort Utility screen, it only recognizes one of the AirPort Express units. That unit in the Bedroom continues to have a flashing yellow light and no internet connection. What do I need to do to get an internet connection in the Bedroom?

    Welcome to the discussions!
    +These past Holidays “Santa” delivered a new Mac Book Pro, along with a Time Machine which is built into an Airport Extreme.+
    You have a Time Capsule, correct?
    The Time Capsule can "extend a wireless network" as well as perform backup functions on the network.
    You could continue to use your AirPort Express in another part of the house to provide a stronger wireless signal in that area. (I've yet to meet the first person who felt that they had too much wireless coverage in their home).
    If you have a DVR or newer DVD player that requires an ethernet connection for advanced features from the internet, the ethernet port on the Express is "live" when it is set to "extend", so you might think about that option as well.
    Hotels don't use ethernet nearly as much as several years ago, but I always take my spare Express on the road to hook up to the hotel's ethernet jack and create a wireless network in the room for the laptop or iPhone. Works great.

  • How to Set Up AirPort Extreme 802.11n only Network

    I purchased a used AirPort Extreme base station and a used AirPort Express off eBay to upgrade my home network. Both are the latest model AE (dual band II, firmware 7.5.1) and AX (802.11n, firmware 7.4.2). I want to use my AE as main router (Internet connection, DHCP) and use my AX to wirelessly extend network to my family room, where I have my Xbox accepting only wired network. And I want AE and AX to communicate through 802.11n to maximize bandwidth. Sounds easy right?
    Well, I've got this set up mostly working except the 802.11n part. Not matter what I do, It seems only operating in g mode. I made my AE creating a 5Ghz network but I couldn't find this network anywhere. Not on my iPad, not on my iMac.
    I'm wondering if I have a defective AE. The seller on eBay told me he used the 11n network just fine. The router is still under warranty, I'm wondering if I should ask Apple for a repair? But since I'm pretty new to Mac in general, I figure there might be something I just missed and hence this post. Any help is greatly appreciated!
    Some screenshots of my configuration: http://picasaweb.google.com/xianxu/IPad

    I do have an AX that extends the AE network. There is nowhere on AX that I can specify radio mode, once I specified it to extend a network. I assume AX talks to AE over the n network and then extends the network to be g compatible? Sounds really strange.
    Maybe not too strange. Since the AX is a single-band device, it can only extend the AEBSn's 2.4 or 5 GH radio, at a time, not both simultaneously. Since your iPhone was able to connect, most likely, it was extending the 2.4 GHz radio ... which was also configured to support "g" devices. What I haven't figured out is how, if you set the AEBSn's Radio Mode to "n only" why non-"n" are still able to connect when the network is extended.
    ... I chose to create a different network name for 5Ghz radio as something like: MID-EARTH (5 GHz). However I can't seem to find this network anywhere. I'm wondering why this is the case? Is my AE somewhat defective?
    This may be a completely different issue than the extended network one. If you remove the AX from the network equation, wireless clients should see two different Network Names or SSIDs ... one being "MID-EARTH (5 GHz)" and whatever you called the 2.4 GHz network. That is, assuming that the client is capable of accessing both bands. If this is not the case, we would need to revisit your AEBSn's configuration settings.

  • How to connect the Airport Extreme to Windows 2003 network?

    Hi there,
    I recently bought an Airport Extreme. I plugged the wired cable to the Airport that previously was in my MacBookPro and gave me access to our Windows network.
    What do you need to do in order to access the Windows 2003 network from the Airport Extreme?
    Thank you very much in advance your help!
    Wildeagle

    Thanks Tesserax!
    for your support..
    I changed it the way you told me..
    it is very simple... and sounds very logic..
    But after I did changed it in the correct IP address of the server
    and I changed the IP address of the Internet Router (this was a must concerning the AP utility)
    1> the internet was slown down..
    2> the server was not reconisable by the iMac.. he gives the server a PC status ?!?!
    3> the connection was poor and was not found in the AP network
    very strange so I changed it to the old version
    is there really no option?
    perhaps with the DHCP? or with the Internet router?
    FYI
    I have:
    1: Internet/ connected with a HUAWEI router, recieved from my internet provider
    2: connect the Huawei router with the AP Extreme Router
    3: connect the AP Extreme router with the Server NAS
    4: AP Extreme router is the basis.. and from there I do have an Apple Airport Network

  • Using an AirPort Extreme to extend my network

    Hi, I am an astronomy fanatic and am looking for the best way to connect my Sphinx SXD2 Vixen mount to my network. It has a LAN Port. My ideas is to purchase an additional AirPort Extreme which will wirelessly extend my network from my home to my observatory outside and then connect my MacMini and Vixen Mount to it.
    This way I can control everything from inside my house where it is nice and warm.
    Will this work? Can an AirPort Extreme act as a wireless hub?
    Thanks
    Herbert

    You basically asked the same question yesterday except this one mentions an AirPort Extreme.
    The same information applies.
    What happened when you tried our suggestions on your other post?

  • HT4145 How can I use an Airport Extreme to act as a Range Extender for an Alcatel One Touch Y800Z WiFi modem/router? I get a message saying it cannot be extended. Thank you. Arup

    How can I use an Airport Extreme to act as a Range Extender for an Alcatel One Touch Y800Z WiFi modem/router? As we live in a rural area and our landline broadband speeds are awful, I have moved on to a 3G provider in the UK (EE/Orange) and set up the wireless modem which is working very well with an iMac. I have an Airport Extreme base station which was previously connected with an Ethernet cable to the landline router, and two Airport Express stations as Range Extenders. I would now like to use the Airport Extreme and the two Express stations to extend the range of the Alcatel WiFi device. I have tried automatic and manual set up with the Airport Utility but at the crucial step for selecting a network to extend, although the WiFi device is recognised, I get a message saying it cannot be extended.
    Thank you for any help you can provide.
    Arup

    This is a problem with a lot of cheap end wifi hotspot like devices.. sometimes you can just swap the sim out to a real 3G wireless router.. that is a better approach IMHO than wireless repeater ever will be.
    In the meantime..
    Have a go with the suggestion.. place the express as wireless bridge. With a computer connected to the wifi from alcatel unit.. (I am amazed Alcatel still are in domestic market.. I thought they sold out). Set the express to join the wifi.. you do this in the airport utility.. old one is easy.. but in v6 you have to trust to luck so to speak and hope the auto setup works.. tell us if you have trouble.
    With the Express bridging.. you can then plug it by ethernet into the TC.. which will be in router bridge..
    ie
    You can then run the connection from wireless or ethernet on the TC.. and it will relay back to the alcatel for internet.. all a bit dodgy but who knows.. it may give you what you need.
    Wireless repeater is never particularly reliable in my experience. I would avoid it if possible.

  • How do I use my airport extreme with my FIOS router?

    How do I use my AirPort Extreme base station with my FIOS Router to extend my network?  I have hard disks connected to my AirPort Extreme and would lik to access them.

    Probably can't answer all your questions - but.... I use a Linksys (wired and wireless) router as my primary entry point for FIOS. I use a Time Capsule and an Airport Express as a common wireless connection. So I have two visibile wireless networks and use them both depending on where I am in the house. Both the TC and AEx can be seen either wirelessly or wired from the entire network. Note - the Linksys provides all the DHCP - you set the apple routers as "bridge mode."

  • (How) can I use my Airport Extreme to send FLAC files/iTunes to my stereo?

    (New to this topic.) Is it possible to use my Airport Extreme Base Station to send FLAC and iTunes music files to my (ParaSound P3/A23) stereo system wirelessly?
    If so, how?
    (Not interested in iOS devices doing this - just, effectively, in using my 'mid-2011'  2.7 iMac (10.7.3) as a music server
    TIA!

    Yes, add an AirPort Express and convert FLAC to Apple Lossless and iTunes will be able to play them. VLC will not help since you need iTunes to connect to the AirPort Express and VLC will not work with iTunes.
    There may be an exception to this but I've never tried it. You could try using AirFoil to connect to the AirPort Express and play your FLAC files that way but I have no guarantee it will work. AirFoil seems very flexible so it may prove to be a solution for you.
    I'm not familiar with the Sonos Bridge/Connect system so I cannot comment on the quality. I understand that it is comparable to using the AirPort Express but locking at the price it seems a more expensive solution for your needs.

  • HT5022 How do i use my airport extreme to extend my wireless network, or make the signal stronger

    I have a wireless modem/router and want to use my airport extreme to strengthen the signal throughout my house...how do i do that?

    Plan to establish a permanent Ethernet cable connection from one of the available LAN <-> ports on your modem/router to the WAN "O" port on the AirPort Extreme. Locate the AirPort Exteme in a central location in the general area where more wireless coverage is desired.
    Configure the AirPort Extreme using AirPort Utility to "create" a wireless network using the exact same wireless network name, same exact wireless security settings and same exact password that your modem/router uses.
    Finally, the Extreme must be configured in Bridge Mode to operate correctly with the modem/router.
    To get everything in the proper sequence on the network....once the Extreme is configured, power off the entire network for a few minutes. Then start the modem/router first and let it run a minute by itself. Then start the Exteme next the same way. Continue starting devices the same way until the entire network is back up.

  • How do I connect airport extreme to seagate hard drive using windows

    How do I connect airport extreme to seagate hard drive using windows?

    First the AirPort Extreme Base Station (AEBS) cannot share out an external HDD attached to its USB port unless it is formatted in either HFS+ or FAT16/32. It will not work if the HDD is formatted in either NTFS or ExFAT.
    If the HDD is formatted properly, when you access the AEBS with the AirPort Utility, does the HDD show up properly on the Disks tab of the utility?
    If it does, then you would access the HDD as any other network share, using the following format: //servername/sharename. In the case of the AirPort Disk (a HDD attached to the USB port of either an Extreme or Time Capsule), the "servername" would be the Extreme's Base Station Name, and the "sharename" would be the volumename of the HDD.

  • HT5022 How do I change my "password" for using an Airport Extreme 802.11n Wi-Fi base station?

    My Kindle Fire asked for a password for my Airport Extreme 802.11 Wi-Fi. The password used on other devices using the Airport Extreme does not seem to work and Apple Support is not willing to help unless a service charge is made. How do I change my password or find out what the password is?

    I am assuming that you are referring to the AirPort's wireless security password and not its base station Administrator's password ... correct?
    If so, there are number of methods of resetting a password if you don't remember what it is. Please check out the following AirPort User Tip for additional details.

  • How to print from iPad using my airport extreme

    I have a New iPad and an iPhone 4 all connected to my Airport Extreme.  My tower computer is a pc as is all of my laptops at this time. I have downloaded Bonjour Print Services to my pc laptops and they print wirelessly through the Airport Extreme using Bonjour Print Services. How do I print from my iPad since I am connected using the Airport Extreme and the printer is a HP7310 which is not an air printer. Please help!

    Suggest that you try an App like Print Central to see if that will allow the iPad to print to your printer.
    PrintCentral for iPad on the iTunes App Store
    HP also is offering ePrint, which might help as well.
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&obje ctID=c02486399&prodTypeId=18972&prodSeriesId=410622
    If still no luck, you really have a question for the iPad support area.  Contact the gurus over there at:
    Using iPad

  • How do you set up a password for a wireless network when using an Airport Extreme?

    How do you set up a password for a wireless network when using an Airport Extreme wireless router?

    Thanks for the updated information.
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the AirPort Extreme icon, then click Manual Setup
    Click the Wireless tab below the row of icons
    Check to make sure that the setting for Wireless Security reads either WPA2 Personal or WPA/WPA2 Personal
    Enter a Wireless Password and Verify Password
    Click Update to save any changes and wait a full minute for the AirPort Etreme to restart

  • I am using an Airport Extreme for wireless and a Netgear VPN Switch for wired connections.  How do I get the two networks to connect?

    I am using an Airport Extreme for wireless and also have a Netgear VPN Switch (FV5318) for internal wired ethernet connections.  How do I get the two networks to connect to each other?

    Tesserax, I would like to keep the Airport Extreme in nplace before the Netgear FVS318 switch because I am using all of the 8 ethernet outputs distributed to 8 differerent locationsl  This way I can just use one of the LAN outputs from the Airport to feed the FVS318.  Here is what I think I am hearing you say:
    Tne reason why the wired and wireless devices are not communicating is because the FVS318G is also a DHCP server and in conflict with the AEBS.
    To remedy the situastion here is probably what I need to do in order:
    1. Change the LAN IP Address of the Netgear FVS318G to be the same subnet of the Airport Extreme.
    2. Then, disable the Netgear FVS318G as a DHCP server.
    3. Make sure the ethernet cable from the LAN port of the Airport Extreme connectis to the LAN port of the Netgear FVS318G.
    4. Restart everything.
    Can you provide me the steps I need to take to get the right IP addresses from the Airport Extreme to put into the Netgear to fix the conflict?  I have the Airport Utility.  I also have two airport express hot spots, and two Apple TVs in addition to computers attached to the 8 ethernet lines.
    Thank you.
    Steve

  • I just moved and Time Warner gave me a new modem and router (Motorola surfboard 6580).  Can I now use my airport extreme in the bedroom to extend wireless signal?  If so, how?

    I just moved and Time Warner gave me a new modem and router (Motorola surfboard 6580).  Can I now use my airport extreme in the bedroom to extend wireless signal?  If so, how?

    Can I now use my airport extreme in the bedroom to extend wireless signal?
    Yes, if you plan to connect the AirPort Extreme back to the Motorola modem/router using a permanent wired Ethernet cable connection.
    No, if you were planning to have the AirPort Extreme extend the Motorola signal wirelesssly.

Maybe you are looking for