How to use 2 devices with firewire connections on new MBP?
I just bought a new Mac Book Pro and I am planning on recording a band with Logic Pro soon. I plan on purchasing an external hard drive with firewire to record the audio to.
My question is I am confused on how I will use both my Firepod (which is a firewire audio interface) and a Firewire external hard drive when my Mac Book Pro only has one Firewire input.
Is there an obvious solution I am not seeing? Could I go from the firepod to the external hard drive to the Mac Book?
Would using the USB ports for the external hard drive make the quality suffer? Thanks for the advice and help!
Is there an obvious solution I am not seeing? Could I go from the firepod to the external hard drive to the Mac Book?
Use a FireWire hub. If the external drive has two or more FireWire ports, it's a hub.
Would using the USB ports for the external hard drive make the quality suffer?
No, but performance might.
(45867)
Similar Messages
-
how to use labview with gpib to connect with Agilent PNA E8362B ?i am newbie ..just started to work on labview about a fortnite bck and +i am a novice in interfacing(networking... jst know tidbits) skill ..so plzzzzz explain me in a litle detail
Sir
We were able to solve that problem...but now could you advice as to which DC power supply we should use (preferably avalable in India) so that it can be controlled by Labview (through a gpib/rs232/any other port) to give a square wave of desired frequency/other parameters.
Regards
Shivam -
How to use labview with gpib to connect with Agilent PNA E8362B ?
how to use labview with gpib to connect with Agilent PNA E8362B ?i am newbie ..just started to work on labview about a fortnite bck and +i am a novice in interfacing(networking... jst know tidbits) skill ..so plzzzzz explain me in a litle detail
Duplicate Post.
-
HT4623 How to use epson iprint after connected with iPad help
How to use epson iprint after connected with iPad help.
When you open Epson iPrint, you will see the various options of ways to proceed, e.g., Photos (to print photos), Maintenance (for printer maintenance). Scan (to perform scanning).
-
Help me!! How to use JavaScript with JSP ??
I am using JDeveloper and I created a screen in JSP which uses a bean for database connectivity and retriving info onto the page.
The page has a ListBox where list items are populated from the database.My requirement is
whenever the list is changed the page shuold be refreshed with the selected item info.
I tried to use 'JavaScript' for triggering the event with 'onChange' event of the ListBox.But the event is not getting invoked. I think JavaScript is not working with JSP.
Please help me with how to Use javaScript with JSP or any other alternative where I can meet my requirement.
I have one more question...I have gone through the JSP samples in OTN and I am trying do download the sample 'Travel servlet' which show list of countries...etc
I have also gone through the 'readme' but I don't know how to extract .jar file.
I would be great if you could help me in this.
Thanks!!
Geeta
nullWe have a similar need. We have used Cold Fusion to display data from Our Oracle Database. We have a simple SElect Box in HTML populated with the oracle data. When someone selects say the State of Pennsylvania. then we have an On change event that runs a Javascript to go get all the cities in Pennsylvania.
Proble we are having is that inorder for the Javascript to work , we currently have to send all the valid data.
Do you know of any way to dynamically query the the Oracle database in Javascript -
How to use setSoTimeOut() with socket ??
HI All!
I eagerly need to know how to use setSoTimeOut() with socket (on server side).
Actually the scenario is that My Server accepts connection and waits for connected client to send data to it. I WANT TO KEEP, IF CLIENT DOENS'T SENDS ANY DATA TO SERVER WITHIN 5 min. THEN SERVER MUST CLOSE THE CONNECTION, BUT IF SERVER RECEIVES STILL A BYTE FROM THE CLIENT WITHIN 5 mins., THE SERVER MUST RESET CHECKING TIME OUT FOR NEXT 5 MINUTES.
How can i do that??
Any help with example will be appreciated!!
Thanx in advanceyou'd have to do something like this:
(this is all assuming you want to read Strings from the socket. setSoTimeout works for any read() call to the InputStream associated with the Socket)
ServerSocket ss = new ServerSocket(myPort);
Socket s = ss.accept();
s.setSoTimeout(5*60*1000); // 5 mins * 60 secs * 1000ms
BufferedReader in = new BufferedReader(new InputStreamReader(s.getInputStream()));
boolean running = true;
while(running)
try
String readIn = in.readLine();
// do whatever you want with the data read
catch(SocketTimeoutException)
running = false;
Now. That's what I think needs to be done. I don't have Java on the machine I'm currently on, so I can't test/verify it, but it goes something like that.
Good luck,
Radish21 -
Need an example how to use SCAN_Start with a callback function
I would appreciate if someone helps me with a working example of how to use SCAN_Start with a callback function. I need just a basic functionality: to specify a channel list (with gains probably), to start a data acquisition task and to receive data buffers utilizing a callback function. t this time whatever I was trying to do caused computer hangups, though it is supposed to be one of the most regular tasks to perform.
Thank you in advance,
MikeHello Mike,
Thank you for contacting National Instruments.
Attached is an example project which uses a callback function to begin analog acquisition (AI) by calling SCAN_Start. This project acquires from the first 2 channels on your DAQ device. Make sure to modify the device number in the code to match the number of your card.
Let me know if you have any further questions...
Sincerely,
Sean C.
Applcications Engineer
National Instruments
Attachments:
Acquire_multichannel_61xx.zip 11 KB -
How to use CVS with JDeveloper
Hi all!
I'm starting a new project and I would like to know how to use CVS with JDeveloper. This is my first project where I will have two more people working with me and I don't know what the better approach is. Should I use CVS that come with JDeveloper (option Internal to Oracle JDeveloper 10g) or should I configure an external repository? In both cases, I don't know what I have to do to have CVS working properly with JDeveloper. Actually I tried to create a new CVS connection in CVS navigator (using the access method Password Server), but when I test I receive the message: Could not open connection to CVS server: general socket failure, sure I must doing something wrong.
I'm using JDeveloper 10.1.3.0.4
Thanks in advance.Thanks for you help John!
I installed cvsnt and when I try to create a new CVS connection inside JDeveloper I receive the message: authorization failed: server adminf29786.dixamico.com.br rejected access to /Diversos/DownLoad/CVS/usr/local/cvsroot for user JMartins
I using pserver method and JMartins is my user in windows
There is something that I'm curious about, when I was installing CVSNT I didn't configure any user and password, is there any default user/password?
Thanks! -
is there any document about how to use JMX with OC4J? the intention is that I would like to create an application, using JMX to manage OC4J, such dynamiclly adding connection pool, create data source. potentially, restart server, application ...
is there any document about this?
ThanksIn addition to that, the documentation also has a section on accessing OC4J JMX/MBeans:
http://otndnld.oracle.co.jp/document/products/as10g/101300/B25221_03/web.1013/b14433/mbeans.htm#sthref163
The blog below also has examples, albeit from a Groovy perspective, but nonetheless, examples of how it can be done easily translated into Java:
http://buttso.blogspot.com/search?q=jmx
-steve- -
How i use start with and rollup both in one query
hi master
sir i use rollup function for subtotal but rollup not give tree
for tree i want to use start with and connect by function
but that query give error
sir how i use both rollup and start with connect by in one query
for tree wise subtotal
please give me idea
thanking youhi master
thank for your reply
sir i get accid and title from master table and balance from detial table then system give me error
sir i send me all table and data with query and error
Sir this is my master table
SQL> desc chartofacc;
Name Null? Type
PARENT NUMBER
CHILD NUMBER
ACCID NOT NULL VARCHAR2(15)
TITLE VARCHAR2(99)
CAMPID VARCHAR2(2)
ACTIVE NUMBER
FSTATUS NUMBER
Data
Parent child accid
1 K1
1 11 K11
11 1101 K1101
11 1102 K1102
11 1103 K1103
11 1104 K1104
11 1105 K1105
11 1106 K1106
11 1107 K1107
11 1108 K1108
11 1109 K1109
11 1110 K1110
11 1111 K1111
11 1112 K1112
11 1113 K1113
11 1114 K1114
1 12 K12
12 1201 K1201
12 1202 K1202
12 1203 K1203
1 13 K13
13 1301 K1301
1301 130101 K130101
1301 130102 K130102
1301 130103 K130103
1301 130104 K130104
1301 130105 K130105
1301 130106 K130106
1301 130107 K130107
1301 130108 K130108
1301 130109 K130109
1301 130110 K130110
1301 130111 K130111
1301 130112 K130112
1301 130113 K130113
1301 130114 K130114
1301 130115 K130115
13 1302 K1302
1302 130201 K130201
1302 130202 K130202
1302 130203 K130203
1302 130204 K130204
1302 130205 K130205
13 1303 K1303
1303 130301 K130301
1303 130302 K130302
1303 130303 K130303
13 1304 K1304
1304 130401 K130401
1304 130402 K130402
1304 130403 K130403
1304 130404 K130404
1304 130405 K130405
1304 130406 K130406
1304 130407 K130407
1304 130408 K130408
13 1305 K1305
1305 130501 K130501
1305 130502 K130502
13 1306 K1306
1306 130601 K130601
13 1307 K1307
1307 130701 K130701
1307 130702 K130702
1307 130703 K130703
1307 130704 K130704
13 1308 K1308
1308 130801 K130801
1308 130802 K130802
1308 130803 K130803
1308 130804 K130804
1308 130805 K130805
1308 130806 K130806
1308 130807 K130807
1308 130808 K130808
1308 130809 K130809
1308 130810 K130810
1308 130811 K130811
1308 130812 K130812
1308 130813 K130813
13 1309 K1309
13 1310 K1310
13 1311 K1311
1311 131101 K131101
2 K2
2 21 K21
21 2101 K2101
2101 210101 K210101
2101 210102 K210102
2101 210103 K210103
2101 210104 K210104
21 2102 K2102
2102 210201 K210201
2102 210202 K210202
2102 210203 K210203
2102 210204 K210204
21 2103 K2103
2103 210301 K210301
2103 210302 K210302
2103 210303 K210303
2103 210304 K210304
21 2104 K2104
2104 210401 K210401
2104 210402 K210402
2104 210403 K210403
2104 210404 K210404
2 22 K22
22 2201 K2201
2201 220101 K220101
2201 220102 K220102
2201 220103 K220103
2201 220104 K220104
2201 220105 K220105
22 2202 K2202
2202 220201 K220201
2202 220202 K220202
2202 220203 K220203
2202 220204 K220204
22 2203 K2203
2203 220301 K220301
2203 220302 K220302
2203 220303 K220303
2203 220304 K220304
22 2204 K2204
2204 220401 K220401
2204 220402 K220402
2204 220403 K220403
22 2205 K2205
2205 220501 K220501
2205 220502 K220502
220502 22050201 K22050201
220502 22050202 K22050202
220502 22050203 K22050203
220502 22050204 K22050204
22 2206 K2206
2206 220601 K220601
2206 220602 K220602
2206 220603 K220603
2206 220604 K220604
2 23 K23
23 2301 K2301
2301 230101 K230101
2301 230102 K230102
2301 230103 K230103
2301 230104 K230104
2301 230105 K230105
2301 230106 K230106
2301 230107 K230107
2301 230108 K230108
23 2302 K2302
2302 230201 K230201
2302 230202 K230202
2302 230203 K230203
2302 230204 K230204
23 2303 K2303
2303 230301 K230301
2303 230302 K230302
23 2304 K2304
2304 230401 K230401
2304 230402 K230402
2304 230403 K230403
23 2305 K2305
2305 230501 K230501
23 2306 K2306
2306 230601 K230601
2306 230602 K230602
2306 230603 K230603
2306 230604 K230604
23 2307 K2307
23 2308 K2308
2308 230801 K230801
2308 230802 K230802
2308 230803 K230803
23 2309 K2309
2309 230901 K230901
2309 230902 K230902
2309 230903 K230903
2309 230904 K230904
23 2310 K2310
2310 231001 K231001
2310 231002 K231002
2310 231003 K231003
23 2311 K2311
2311 231101 K231101
2311 231102 K231102
2311 231103 K231103
23 2312 K2312
2312 231201 K231201
2312 231202 K231202
2312 231203 K231203
2312 231204 K231204
23 2313 K2313
2313 231301 K231301
2313 231302 K231302
2313 231303 K231303
2313 231304 K231304
2313 231305 K231305
2313 231306 K231306
2313 231307 K231307
2313 231308 K231308
2313 231309 K231309
2313 231310 K231310
2313 231311 K231311
2313 231312 K231312
2313 231313 K231313
2313 231314 K231314
2313 231315 K231315
23 2314 K2314
2314 231401 K231401
2314 231402 K231402
2314 231403 K231403
2314 231404 K231404
2314 231405 K231405
2314 231406 K231406
2314 231407 K231407
23 2315 K2315
23 2316 K2316
2316 231601 K231601
2316 231602 K231602
23 2317 K2317
23 2318 K2318
23 2319 K2319
2319 231901 K231901
2319 231902 K231902
2319 231903 K231903
2319 231904 K231904
2319 231905 K231905
2319 231906 K231906
23 2320 K2320
2320 232001 K232001
3 K3
3 31 K31
31 3101 K3101
31 3102 K3102
31 3103 K3103
31 3104 K3104
31 3105 K3105
3 32 K32
32 3201 K3201
32 3202 K3202
32 3203 K3203
32 3204 K3204
32 3205 K3205
32 3206 K3206
32 3207 K3207
4 K4
4 41 K41
41 4101 K4101
4101 410101 K410101
4101 410102 K410102
4101 410103 K410103
4101 410104 K410104
4101 410105 K410105
4101 410106 K410106
4101 410107 K410107
4101 410108 K410108
4101 410109 K410109
4101 410110 K410110
4101 410111 K410111
4101 410112 K410112
4101 410113 K410113
4101 410114 K410114
4101 410115 K410115
4101 410116 K410116
4101 410117 K410117
4101 410118 K410118
4101 410119 K410119
4101 410120 K410120
4101 410121 K410121
4101 410122 K410122
4101 410123 K410123
4101 410124 K410124
4101 410125 K410125
4101 410126 K410126
4101 410127 K410127
4101 410128 K410128
4101 410129 K410129
4101 410130 K410130
4101 410131 K410131
4101 410132 K410132
41 4102 K4102
41 4103 K4103
41 4104 K4104
4104 410401 K410401
4104 410402 K410402
4104 410403 K410403
4104 410404 K410404
41 4105 K4105
41 4106 K4106
41 4107 K4107
41 4108 K4108
4108 410801 K410801
4108 410802 K410802
4108 410803 K410803
41 4109 K4109
4109 410901 K410901
4109 410902 K410902
4109 410903 K410903
41 4110 K4110
41 4111 K4111
4111 411101 K411101
4111 411102 K411102
4111 411103 K411103
41 4112 K4112
4112 411201 K411201
41 4113 K4113
4113 411301 K411301
41 4114 K4114
4114 411401 K411401
4114 411402 K411402
5 K5
5 51 K51
51 5101 K5101
51 5102 K5102
51 5103 K5103
51 5104 K5104
51 5105 K5105
51 5106 K5106
51 5107 K5107
51 5108 K5108
51 5109 K5109
51 5110 K5110
51 5111 K5111
51 5112 K5112
51 5113 K5113
51 5114 K5114
6 K6
6 61 K61
7 K7
7 71 K71
7 72 K72
7 73 K73
7 74 K74
7 75 K75
7 76 K76
This is my detil table
SQL> desc accbal;
Name Null? Type
ACCID VARCHAR2(15)
YEARID NUMBER
CRBAL NUMBER
DRBAL NUMBER
ENTDATE DATE
BALID NUMBER
Data in detail
K1101 46291132
K1102 13182173
K1103 23784045
K1107 10001795
K1108 9083529
K1110 4224350
K1112 6696832
K1113 7963381
K1114 742766
K1201 1486082
K130104 1977616
K130106 736266
K130107 396673
K130108 42751
K130109 298362
K130110 187696
K130111 537
K130112 942
K130113 987
K130114 1272
K130115 40000
K130205 259941
K130303 177716
K130406 809719
K130408 1786091
K130701 301000
K130702 151200
K130703 7570
K130704 34400
K1308
K130801 5400
K130802 45000
K130803 10856
K130807 24300
K130808 16500
K130810 104500
K130811 60000
K130812 181000
K130813 1750000
K1309 1225565
K1310 2176259
K1311
K131101 788780
K410101 24926
K410102 9545
K410103 28500
K410104 8192
K410105 847
K410106 37100
K410107 2332
K410108 9844
K410109 7843
K410110 9313
K410111 1425
K410112 6089
K410113 15497
K410114 5790
K410115 4251
K410116 22293
K410117 855
K410118 6497
K410119 14996
K410120 124214
K410121 6713
K410122 1567
K410123 75821
K410124 5085
K410125 7125
K410126 4342
K410127 21485
K410128 641111
K410129 589
K410130 50
K410131 163900
K410132 3849
K4105 3946489
K4107 100000
K410801 972011
K410802 1707806
K410803 116450
K4110 13113874
K411101 98335
K411102 32454
K411103 53569
K411201 25327406
K411301 7143103
K411401 4500000
K411402 12754
K5102 2120031
K5103 13543810
K5107 4596103
K5108 5604493
K5110 2008401
K5112 2182778
K5113 4748537
K5114 556914
K61 43297680
Sir I use this query
select lpad(' ',2*(level-1)) || to_char(child),title,sum(drbal),sum(crbal),
from chartofacc, accbal
where chartofacc.accid=accbal.accid(+)
start with parent is null
connect by prior child = parent
group by rollup(substr(mas.accid,2,1),substr(mas.accid,3,1),substr(mas.accid,4,2),substr(mas.accid,6,2) ,chartofacc.accid,title,fstatus);
sir this query not give me result and give me error this
SQL> /
from chartofacc, accbal
ERROR at line 2:
ORA-00936: missing expression
Please give me idea how I get tree type subtotal tribalance
Thanking you
Aamir -
How to use Terminal with KeySpan USB serial adaptor cable?
I own a KeySpan model USA-19HS to use with our MacBookPro when working on clients networking equipment that require serial communication. I have used ZTerm with excellent luck, but it costs, and is yet another application that I dont really want. I would like to know if any one out there has exacing instructions on how to use Terminal with this adaptor. If I could write a file that had, say, the couple most common settings (9600-8-n-1, 57600-8-n-1, et cetera) that I could simply click on, to open a new Terminal window with those settings, then simply close that, and open a new window (apple+n) in order to get back to a default settings terminal window. All feedback is most appreciated.
Thanks so much, Jason SjobeckHi, Jason. Welcome to the Discussions.
You wrote: "All feedback is most appreciated."OK.
1. Have you considered discussing this with Keyspan Support?
2. Have you read the section "OSX has Terminal.app - why do I need ZTerm?" on the ZTerm Home Page? That seems to explain why one needs an app like ZTerm.
3. A quick search of Keyspan's FAQ for your product and terminal doesn't yield much more than how to find the serial ports using Terminal.
Likewise, this Google search also yields little, and variants of that search of such weren't particularly help either.
It appears your inquiry seems to be a somewhat esoteric topic.
4. Apparently, ZTerm X is a bit long in the tooth and there's no Universal Binary for it. It sounds, however, like you've tried it running on your MBP under Rosetta, yes?
5. In researching alternatives to ZTerm for you, I note the followng:• The comment from "Reverb" on this page suggests C-Kermit or Kermit as a free alternative.
• This tip on Mac OS X Hints cites Minicom as another option.6. You may want to try your question on the Unix Discussion.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X -
I need to get the number of lines in internal table, which would
be easy, using DESCRIBE TABLE itab LINES lines. But the problem
is, that I get the name of this internal table in the field of
another internal table, so I have to use the name of internal
table as variable, but I don't know how to use variables with
DESCRIBE TABLE (or if this is possible).Hi,
REPORT ZPRUEBA782 .
define two tables with diferent structures.
data: begin of table1 occurs 0,
registro type i,
end of table1.
data: begin of table2 occurs 0,
registro type i,
repid like sy-repid,
end of table2.
data: rows type i.
start-of-selection.
fill them with data
do 1000 times.
table1-registro = sy-tabix.
append table1.
enddo.
do 1757 times.
table2-registro = sy-tabix.
table2-repid = sy-repid.
append table2.
enddo.
call a form that receives as input the table and returns the number
of rows as output.
perform howmanyrows tables table2 changing rows.
break-point. "evaluate the number of rows
perform howmanyrows tables table1 changing rows.
break-point. "evaluate the number of rows
end-of-selection.
form howmanyrows tables itable changing rows.
rows = 0.
loop at itable.
add 1 to rows.
endloop.
endform.
You can try it if you don't find a better solution.
Cheers,
Chaitanya. -
How to Use Gmail With Apple's Mail?
Answer:
Now Itis not a Problem, Please go to this link and know how to solve this problem, Ihave configuir this in my mac pro. Have enjoy.
http://picturemuseum.blogspot.com/2011/08/how-to-use-gmail-with-apple-mail.html
http://mobilesuggestion.blogspot.com/2011/08/how-to-use-gmail-with-apples-mail.h tmlI notice that it's possible to have sticky posts in these forums. See
http://forum.java.sun.com/forum.jspa?forumID=534
the Concurrency forum for an example. Posting a link to the FAQ in a sticky post might reduce the number of FAQs asked here by maybe 1%? Or posts like this one might do well as a sticky? -
How to use Count with Date Parameters
Hello,
I am having issues using the Count() function in conjunction with date parameters.
This is a Siebel report and in my report I have 2 date parameters(From Date, To Date). In a nutshell I am basically trying to count Opportunities that has a start date within the given date period. However I don't see a reasonable way to put my date parameters within the Count() function. The reason being is that I need to have a huge chunk of code to convert the dates into a common format that can be compared, and it won't even fit within the code block in my rtf template. I am not even sure how to put multiple conditional statements inside a Count() function since all the examples I have seen are very simple.
Anyone have a suggestion on how to use Count() with date parameters?
Thanks.Any chance you can get the date formats in the correct format from siebel?
I don't know Siebel - so I can't help you with that. If you get the correct format it is just
<?count(row[(FromDate>=date) and (date<=ToDate))?>
Otherwise the approach would probably need to use string function to get year/monthd/day from the date
and store it into a varialbe and compare later the same way
<?variable@incontext:from; ....?>
<?variable@incontext:to; ...?>
<?count(row[($from>=date) and (date<=$to))?>
Potentially you can use the date functions such as xdofx:to_date to do the conversion
[http://download.oracle.com/docs/cd/E12844_01/doc/bip.1013/e12187/T421739T481158.htm]
But I am not sure if they are available in your siebel implementation.
Hope that helps -
How to use javap with jar files ?
how to use javap with jar files ?
thanksAs long as the jar is on the class path, your gold. So,
javap -classpath myjar.jar mypackage.MyClass
Chuck
Maybe you are looking for
-
Is it possible to copy ESS launchpad
Dear Experts- We are implementing ESS 1.51 busines spackage. Our backend system in ECC 6.0 EHP5. We want customise ESS launchpad (not just removing the links). Can any one let me know the steps. How I can make a copy of ESS launchapad. After makign t
-
Apps not loading after restore
I recently had to restore my iPhone after disabling it by typing the wrong password too many times. I managed to get my apps, pictures etc back because of back-up, however, now my apps won't load. When I click on an app it starts up then just closes.
-
PS elements 2.0 phot merge question
Hank, Go to Elements Help and search for "Creating panoramic images using Photomerge". Reading through that page and the following ones should give some good guidance. Juergen
-
How to animate an object that goes behind another
Does anyone know how to go about animating a movie clip that would go behind another movie clip? For instance: A stack of photos, that on click, the top photo would animate to the left (or right) and then animate to the back of the stack. My only pro
-
New computer/windows 7. how to install deskjet 4210, color laserjet cp1510?
I have a new computer with windows 7. None of my printers (Deskjet F4210, Color laserjet CP1510) will install with windows 7.