How to use 3 motors when gaming
when i load game only main computer works the other 2 screens dont load game
Option 1. Turn Mirroring On
Option 2. Take the game out of Full Screen and play in a large window.
There might be a third option if you are using "Displays in separate Spaces" but I do not and have not explored that angle.
Similar Messages
-
How to use java script when popups are blocked in browser
How to use java script when popups are blocked in browser
Not. When people install a popup blocker they don't WANT popups, so stop trying to force them down their throats.
-
How to use family sharing when already sharing the same iCloud account
My wife and I started separate iTunes account many years ago, and thus made many purchases on each account. Some time later we started using iCloud, and when we did, we decided we wanted to share the same iCloud account so my wife, for example, could add entries in the Notes app and I'd be able to see them, and vise versa. In addition, we have another iPhone for our daughter, and with that she has her own iCloud account in use on her phone, however, she is signed into my iTunes account on her phone (so her/my purchases were on the same iTunes account, namely mine).
Now, years later, Family Sharing came along and I'm trying to figure out how I can also make that work with the iTunes and iCloud setup we currently have. My hope, with the Family Sharing feature, is that my wife's purchases (on her iTunes account) and my purchases on my iTunes account would be able to be shared. That said, how should I go about setting up Family Sharing suchsounds like you only need to share with the other account that your daughter used. the same id in icloud on wifes devie is fine. this article will help. Sharing purchased content with Family Sharing - Apple Support Peace, Clyde
-
How to use the Observer when a page loads
Anybody know how to use the
Spry.Utils.addClassName('DivName','selected') and then fire the
Spry.Utils.addClassName with onLoad?
I am loading a page with the selector utils in it into a div
and then I think I must need an Observer to get the
Spry.Utils.addClassName to work when this page loads in a div.
Any help would be greatly appreciated.
Thank you,
Bisser.I added Spry.Utils.addClassName('DivName','selected') in the
Script after the constructor and after the effects and it works
fine. Thank you for your help to get me going.
Well after the fact, this solution was a problem because it
loads the selector each time I loaded the file.
kinblas had the correct answer that I was looking for.... as
it loads the selector as a 3rd argument.
ie:
Spry.Utils.updateContent('mainDIV','/menu.php', function() {
Spry.Utils.addClassName('DivName','selected'); });
Thanks to both of you for your continued support.
Bisser. -
How to use dynamic parameter when a report is created using Stored Procedures
Hi all,
any one have the idea of how to use dynamic parameter in crystal report XI R2
when report is created using Stored Procedure.
Regards
shashi kant chauhanHi
You can create an SQL command in Database Expert > Expand your datasource > Add command
Then enter the SQL query that will create the list of values to supply to the user
eg select field1,field2 from table
Then edit the parameter of the report. These will be the SP parameters adn can be seen in field explorer.
Change the parameter type to Dynamic
Under the word Value click on Click here to add item
Scroll down to your Command and select one of the values that you want to appear in the list
e.g field1
Then click on the Parameters field - this is essential to create the param
You can edit other options as required
That should do it for you.
I must say that i use CR 2008 connected to Oracle 10g SP, but i reckon this will work for SQL DB and CR XI as well
Best of luck -
How to use ITunes France when you live in Uk ?
how to use ITunes France on IPad ou IPhone when you live in UK ?
Ok thanks,
but living in uk do you think I can manage both addresses France and London ID with Apple?
Can I keep my Apple ID UK ?
On my Ipad, I am automatically directed on the uk store . My IPhone could still work with the Uk ID if I change it for France one?
Sorry but I am a bit confused -
How to use BeanUtils.copyProperties() when using BC4J
Hi
jakarata commons package provides the ability to transfer data from Data Transfer Object to Form bean using BeanUtils.copyProperties().
How can this be achieved when we are using BC4J where we have Entity and ViewObjects which are DTO's.
Thanksrepost
-
How to use Synchronized method when creating our own controls
I don't know how to use the synchronized method when creating our own activex like controls to speed up the application.
[url http://java.sun.com/docs/books/tutorial/essential/threads/multithreaded.html] here you go
-
Could someone please tell me where I can info on how to use the controls I.e live pause,forward,rewind etc when watching live shows on my ipad mini please.
well, i can't really tell if i am only allowed one connection with this isp. basically, whenever i plug in the ethernet cord, all of the information gets filled in in the ethernet section of the network, except for the router info. there is router info filled in on my sister's computer whenever i plug the cord into her computer, though. does that mean i can't also use the modem for my computer? sorry, this is both my first time using a mac and my first time using anything other than dial-up, so i'm pretty lost. thanks for the info you've given me thus far.
-
How to use ABS function when using BWA connection
Hi Experts,
We are using InfoSpace on top of BWA
Could you kindly let me know how to use ABS functionality for InfoSpace
Because we want to use formula: (A-B) / Abs(B), we cannot get ABS (B)
Would you kindly help on this?
Best regards
Alex yangrepost
-
I use six servo motor to control them to form some traces. the motor is from japan ,and every motor has its own encoder , and the endoer output to its servo drive to form closed loop .they say the motor system's closed loop is ve precise ,I do not have to connect the encoder to the motion controller . by the way I use pxi 7354 and umi 7774 to control the motors. my application is to set the position loop mode to control the six motors'motion correlatively.
but I want to try to connect the encoder to the motion controller .so the error comes out . first I have to select the step mode in the MAXI I can start the motor even if I do not connect the feedback, when I select the serve mode the motor can not work. why ? the second when the feedback is connected , the motor had to work in a very low velosity ,otherwise the following error will reach the default.even I set the following error is very big , when the velosity come up to some extreme the motor will stop for the following error's limit
who can help meDear Sir/Madam,
I have a similiar problem also. For example, I use Stepper mode with open loop configure in MAX to run a FUJI servo with no problem at all, but once it is configured to close loop in MAX the encoder value doesn't change when monitored from 1D interactive window of MAX. And eventually the following error came out and motor stop!
I have set the correct encoder feedback parameter in Servo drive, and I can read the encoder value by Read Encoder.vi but How come it doesn't show the value in MAX? Is any configuration that I was missed out in MAX? Is need to set the encoder setting in MAX to match the servo encoder output?
Thanks. -
How to use ipod touch when I already own an iphone on one computer?
I have a dilemma. when I try to setup my brand new ipod touch I got for xmas, it says i must setup it up as new device or restore from backup. the problem is I use this computer to sync to my iphone 3gs.
itunes wont let me sync to an ipod touch and an iphone on the same computer, its one or the other.
if i choose to setup as new device, then when I sync my iphone it says itunes is synced to another device and must wipe my iphone clean or restore from backup???
how do i use itunes so I can put movies n music on my ipod touch without it affecting my iphone?"Note: iTunes for Windows does not support syncing multiple iPod devices at the same time."
exactly what do they mean when they say at same time? like i can not connect one device, sync it then connect another device and sync that one??
hence my dilemma. this is from that link i read.
i tried this and itunes fails
what a terrible dilemma, sigh
i connect the ipod touch and tell it to setup as new device.
i sync some movies and playlists.
easy enough
then i connect my iphone...guess what? it says this is a new device, would you like to setup as new or restore from backup!!!
if i restore from backup it puts the ipod touch playlists and all my contacts are gone
it seems the only way to do this is, from reading that link, to create a new user in windows, and use this new user profile to manage ipod touch.
so now i'm gonna have to siwtch back and forth between 2 windows accounts.
what a royal pain in the butt
why can't itunes just let me sync what i want to the device and not care what it has, so i can just add regardless if new or not.
god i hate itunes.
Message was edited by: ninja_pimp -
I have a $20 credit showing on my itunes account. When I go to purchase it asks for my credit card info. I want to use the credit i have. how do I access it/
1-800-676-2775 apple support tech support 1 800 275 2273
If your computer is on one minute before it freezes, than you have one minute to secure your serial number.
click the apple----->click about this Mac ------> click on version----> until you see the serial number. You may have to do this a couple of times if it freezes before you have all the numbers. A camera might help.
Good Luck -
How to use same transaction when calling CMP entity beans and DAO (JDBC)
We are currently using Weblogic 8.1 SP2 with an Oracle 10g database (using XA thin and non-XA drivers).
We have a session bean that invokes an entity bean and a DAO (data access object pattern) in order to add data in 2 separate tables (account and history). Rows are added to the first (account) table using a CMP Entity bean while inserts are done in the 2nd (history) table using a DAO. Here is some pseudo code:
addHistorySessionBean (trans-attribute="Required")
begin
Step #1 - call addAccountEntityBean (trans- attribute="Required")
Step #2 - call addHistoryDAO (get datasource, connection)
end
The 2nd table (history) has a foreign key constraint to ensure that the corresponding key exists in the first (account) table. Unfortunately, DAO inserts on the 2nd (history) table fail with a foreign key constraint violation (INTEGRITY CONSTRAINT VIOLATION - PARENT KEY NOT FOUND!) since they cannot see the row added to the 1st (account) table in step #1 by the CMP entity bean.
How does one ensure that all this is done in a single transaction ? It appears that the app server creates two seperate transactions (one for the session bean facade and the entity bean and a 2nd transaction (when we retrieve a connection using the same data source JNDI name) for the DAO.
A post on server side suggested using a "<resource-ref>" in the session bean to tie the two potentially separate transactions together, but that does not work for us. However, I am not sure if we are doing that correctly. After we define the resource ref in the session facade bean, do we use the resource ref "name" attribute to lookup the datasource or do we still lookup the datasource by JNDI name ? Do we need to define the resource-ref tag in the entity bean also ?
Does Weblogic allow using a single transaction for this type of a scenario ? How does one specify within Weblogic that the same transaction should be utilized by the entity bean and any subsequent DAOs?
People have also suggested that we defer constraint checking until the transaction(s) are committed but that sounds like a work acount without addressing this issue. Would postponing the constraint checking in Oracle cause any additional overhead ?
Any suggestions with specific examples or documentation on how to address this issue will be gratefully appreciated.Thanks for your suggestion. Unfortunately, this does not work since it appears that there are 2 separate transactions going on here. One, the original one initiated by the session bean and used by the entity bean and the other initiated by the DAO. Any other ideas appreciated.
Hi,
Try setting the delay-database-inserts tag to
ejbCreate in RDBMS descriptor file.
http://bernal/stage/wls/docs81/ejb/DDreference-cmp-jar
.html#1113981
vasanthi ramesh -
How to use new sequence when one is reached its maxvalue in PL SQL code
Hi,
Currently, I am populating a unique product serial number in a table column using a sequence call to generate new number. For different products, I have different sequences and in my PL SQL code usiing IF..Else block I populate serial number for different products. For one most selling product sequence, we are reaching a Max value in production in a month and to make sure that application will continue to work fine for various end users without getting any error on their screens, I want my code to switch to new sequence automatically. I just need to add another if condition but my problem is how to find accurately when max value is reached for old sequence.
As call to old sequence can happen in different sessions there could be inconsistency and can end up at error. My new sequence value has to start with AV1000. Please suggest.
My old sequence look like this :
SEQUENCE Prd
INCREMENT BY 1
START WITH AS1000
MAXVALUE AS9999
MINVALUE AS1000
CYCLE NOCYCLE
CACHE 2
Order Yes;
Edited by: user11695088 on Jul 15, 2009 12:14 AMCatch the exception and use your new sequence. But somehow, I'm not liking your alternative approach.
SQL> set line 300
SQL> set pages 50000
SQL> set serveroutput on
SQL> create sequence testing_seq increment by 1 start with 1 maxvalue 3
2 /
Sequence created.
SQL>
SQL> create or replace procedure test_seq_proc(p_seq out number)
2 is
3 begin
4 select testing_seq.nextval
5 into p_seq
6 from dual;
7 --
8 dbms_output.put_line(p_seq);
9 --
10 end;
11 /
Procedure created.
SQL> declare v_out number;
2 begin
3 test_seq_proc(v_out);
4 end;
5 /
1
PL/SQL procedure successfully completed.
SQL> /
2
PL/SQL procedure successfully completed.
SQL> /
3
PL/SQL procedure successfully completed.
SQL> /
declare v_out number;
ERROR at line 1:
ORA-08004: sequence TESTING_SEQ.NEXTVAL exceeds MAXVALUE and cannot be instantiated
ORA-06512: at "ETL_ADMIN.TEST_SEQ_PROC", line 4
ORA-06512: at line 3
SQL>Cheers
Sarma.
Maybe you are looking for
-
The content on my iPod touch cannot be read
My nearly 4 week old brand new iPod touch 8GB's content cannot be read on iTunes and it says that I need to restore it, which I don't want to do, so could anyone help me? I would be really grateful if someone can as I have lots of content on my iPod.
-
How to clear cmos with jumper method MSI Z97 Gaming 9 AC
no have socket for jumper/clear cmos ?
-
Why iPhoto 9.5.1 will not complete download on my OSX 10.9.2?
Why iPhoto 9.5.1 will not complete download on my OSX 10.9.2?
-
Searching of Single Quote( ' ) in DataBase
How do I use like statement to find a character " ' " ? I used the following syntax select * from table where col1 like '%'%' ; but it gives a error SQL statement not properly ended. So how to search for a single quote( ' ) in a String
-
Delete Bapi Structure of a SyncBo
Hi, i need to delete a structure (040) of a SyncBo, i did this by the next code: SyncBo syncBo = getSyncBoInstance("Y01_ORD_TR", topSyncKey); SyncBoDescriptor sbd = syncBo.getSyncBoDescriptor(); RowDescriptor trd = sbd.getRowDescriptor("040"); Row ro