How to use 3110 as a usb modem in Mac

I use 3110 as a usb modem in my Mac,but it can't work,the Mac can find two usb modem when I plug my 3110,each can't work,I see the log find my modem no responses for the AT command,so it can't work,my phone is good,beacuse I can use it in Windows as usb modem, and I also can use bluetooth modem in Mac,after modify isyn ,I can use isyn when i use bluetooth but can't work when i use usb cable,and I hope i can use usb modem ,is anybody use 3110 as usb modem?thank's your help!

Hi,
Listed below is the step by step intructions to configure the Nokia device as a modem to a mac.
Steps:
Connecting your Mac to the internet is convenient and easy with your a compatible Nokia S60 device. You'll need a Nokia S60 device that supports a 2G or 3G data connection (such as GPRS or HSDPA), a compatible Mac (with the latest OS X), a USB cable for your Nokia device or a Bluetooth-enabled Mac, and a network subscription with your mobile service provider.
To set up your device you'll need to know your operator's Access Point Name (APN) and have the packet data service enabled. For help with this please contact your operator.
In Settings select and open Connection >Select and open Packet data > Select and open Access point >Type in your operator's Access Point Name
Exit Settings. Your device is now ready to be used as a modem for your Mac!
Bluetooth Connection: Pairing between Mac and Device using bluetooth, follow the instruction from here: http://europe.nokia.com/get-support-and-software/download-software/device-as-a-modem/connect-to-your...
Note: Preferred mode is USB as it much faster than Bluetooth.
Connect the device and then go to System preferences- >Network- >Select Device (Nokia XXX)
Click on Advanced Tab > Modem tab
- Vendor : Nokia
-Model:GPRS (GSM/3G)
-Telephone Number: *99***1# (contact your operator to get this settings)
-APN: airtelgprs.com (contact your operator to get this settings)
CID: 1
Once connected it will be highlighted in green.
Hopefully this helps.
Cheers
Sandy
Message Edited by sandy2410 on 30-Mar-2009 04:52 AM
Helpful information, then dont forget to hit the kudos star :-) Or say it accepted solution and thanks

Similar Messages

How can use iphon4s as a 3G modem in mc or pc?

how can use iphon4 as a 3G modem in mac or pc?

It's called a "Personal Hotspot", otherwise knows as 'tethering'.
You must be using a supported carrier, they must support the feature, and you have to subscribe to a plan that allows tethering. Once all of these conditions are met, the option will appear in settings.
Contact your carrier.
As for how to connect your computer to it once it's working, read the manual. It is detailed there.

Could my ipad2 connects to the Internet using SIM card or USB Modem?

Could my ipad2 connects to the Internet using SIM card or USB Modem?

If you have a 3G iPad, it can connect to the internet using cellular data. As the iPad has no USB port, you can't connect a USB modem. You can use what is called a MiFi, though. They connect to cellular service and create a personal WiFi hotspot.

How to use a iomega prestige portable hard drive (mac edition) to resolve a start up space problem i.e. have 1.07gb need 4.85gb to upgrade tp itunes 7

How to use an iomega prestige portable hard drive (mac edition) to resolve a startup space problem. I need 4.85gb to up grade to itunes 7. I have 1.07gb free

com.apple.NVDAResman appears to be the culprit, indicating a problem with the graphics card. Run the Apple Hardware Test program, extended tests.
See
What is a kernel panic,
Technical Note TN2063: Understanding and Debugging Kernel Panics,
Mac OS X Kernel Panic FAQ,
Resolving Kernel Panics, and
Tutorial: Avoiding and eliminating Kernel panics for more details.

How do I share a 3G USB modem connected to my Macbook Pro with my Airport Express?

Hi. I have a 3g USB modem connected to my macbook pro, and I want to try share the signal with my Airport Express (latest model).
Now before everybody screams that it can't be done, I was searching the forums and found a discussion in which someone describes how to do it from 2008, unfortunately it is archived and I couldn't ask the author directly, and the description doesn't go into much detail.
In the thread, the author describes turning internet sharing on to share the USB modem, creating a network on the macbook, then renaming the Airport Express network name the same as the macbook, and setting the AX to Join a Network.
Problem being there is no description of whether the macbook connected to the AX via ethernet or wifi, what settings were changed on the AX eg bridge mode.
Is this possible in theory, and has anybody had any success sharing a 3g USB modem via a macbook pro to an AX? I know there are other options like getting 3g ethernet modems, unfortunately not an option in this case - new house, waiting for DSL to be installed, 2-3 month wait.
Thanks

Well, you cannot use the 3G USB modem plugged directly into the Express. However, you can configure your MacBook Pro to do 'Internet sharing' (SysPrefs>Sharing) over the Ethernet port, and then connect your Express into the Ethernet port. Alternatively, you could always get your MacBook to 'create a wireless network'.
new house, waiting for DSL to be installed, 2-3 month wait.
You could always look for open WiFi networks to *cough*borrow*cough* .

How to use nokia x as a modem to run internet on ...

Please tell me how to use nokia x as modem for pc to connect to internet.

With wifi or USB to pc ..
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

How to use IXXAT CAN to USB in LabVIEW for CAN read, when I am having VCI V3 driver?

I am having VCI V3 driver for IXXAT CAN to USB.How to use that in LV for reading data from CAN device.

Did you check the settings to make sure that the Password Manager is enabled?
*Tools > Options > Security: Passwords: "Remember passwords for sites"
Make sure that you do not run Firefox in (permanent) Private Browsing mode.
*https://support.mozilla.org/kb/Private+Browsing
*Tools > Options > Privacy: Use custom settings for history
*Deselect: [ ] "Always use private browsing mode"
See also:
*http://kb.mozillazine.org/User_name_and_password_not_remembered
*http://kb.mozillazine.org/signon.autofillForms

Cant use x2-01 as usb modem..

Facing problum to use mobile as modem. I have pc suite ovi suite cant use that.if i connect mobile to pc errore shows on mobile 'no responce from host' plz help me.
I am using nokia x2-01.

Hi Ganeshsal5100
Try to update the software of your Nokia X2-01 using Nokia Suite, for guidance on how to perform the update refer on this link. After the software update check if you can use your phone as a modem.
If my post helped you, please don't forget to click on the "White Star" and if it resolved your issue click on "Accept as Solution"

Using Pantech 4G LTE USB Modem with Chromebook

Got a Chromebook for Christmas, but I don't have wi-fi at home. I do have the UML290 modem for my windows laptop.
Can I install VRZ manager on Chromebook, and use the USB modem on it to connect to the internet?
TIA
Rick

No! Chromebook uses Android OS, you will a CradlePoint MBR95 or Pepwave Surf on The Go Router to insert the UML290 and then you can use the built in wifi in the Chromebook to connect to the router and get internet access.
You can get the gear at 3gstore
Here is some Reviews on the MBR95 works like a champ
http://3gstore.com/product/3029_cradlepoint_mbr95.html#Tab2

How to use Terminal with KeySpan USB serial adaptor cable?

I own a KeySpan model USA-19HS to use with our MacBookPro when working on clients networking equipment that require serial communication. I have used ZTerm with excellent luck, but it costs, and is yet another application that I dont really want. I would like to know if any one out there has exacing instructions on how to use Terminal with this adaptor. If I could write a file that had, say, the couple most common settings (9600-8-n-1, 57600-8-n-1, et cetera) that I could simply click on, to open a new Terminal window with those settings, then simply close that, and open a new window (apple+n) in order to get back to a default settings terminal window. All feedback is most appreciated.
Thanks so much, Jason Sjobeck

Hi, Jason. Welcome to the Discussions.
You wrote: "All feedback is most appreciated."OK.
1. Have you considered discussing this with Keyspan Support?
2. Have you read the section "OSX has Terminal.app - why do I need ZTerm?" on the ZTerm Home Page? That seems to explain why one needs an app like ZTerm.
3. A quick search of Keyspan's FAQ for your product and terminal doesn't yield much more than how to find the serial ports using Terminal.
Likewise, this Google search also yields little, and variants of that search of such weren't particularly help either.
It appears your inquiry seems to be a somewhat esoteric topic.
4. Apparently, ZTerm X is a bit long in the tooth and there's no Universal Binary for it. It sounds, however, like you've tried it running on your MBP under Rosetta, yes?
5. In researching alternatives to ZTerm for you, I note the followng:• The comment from "Reverb" on this page suggests C-Kermit or Kermit as a free alternative.
• This tip on Mac OS X Hints cites Minicom as another option.6. You may want to try your question on the Unix Discussion.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

How do I securely eject vodafone USB modem in Yosimite?

Hi Guys,
Every time I try to safely remove the usb modem , my system comes up with an warning message that the disk was removed without shutting down first and the restarts the Macbook ... this is freakin anoying.
I do go to the Vodafone software and close everything and also quit the application but still does it ..

Try going to 'Finder'. You should see something like 'Vodafone USB modem' or 'USB modem' under the 'Devices' tab on the left hand side of the 'Finder' window. There should be an icon next to it, that allows you to eject it. If not, right click or tap with two fingers on it (if you enabled the feature) and you should be able to eject it. If not, well... I can't help very much then.

Z1 compact as USB modem on mac

Hello!
How to connect Xperia Z1 Compact as USB modem with my Macbook air MD760?
I've checked the box "USB tethering" in phone settings. But I don't have an internet connection on my mac.
Thanks!

As far as I know this will not work as standard since Mac does not support drivers for this function as standard. But you'll might be able to download separately drivers for this function on your Mac. Make a Google search on "HoRNDIS" for example and hopefully you will get further information.
Otherwise, you can setup your phone as a portable Wi-Fi hotspot. Check the following link under the headline "To use your device as a portable Wi-Fi® hotspot":
http://userguide.sonymobile.com/referrer.php?region=global-en&product=xperia-z1-compact#Sharing-your...
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

How to see pics from my USB on my Mac?

I have copied some of my pics from my Windows based Laptop onto my USB(Intenso), and want to copy / save them to my Mac and view them there!
I have tried to open it with iPhoto, I couldnt. I have openoffice on my Mac, but openoffice "text" opens automatically if I want to view those pics on my USB but not the one for "photos"!
Does anyone know, how to use openoffice / iPhoto to open / view & save pics on to a Mac with pics originally caming from a Windows based system!

Hey u2sweetestallie,
Thanks for the question and detailed information. If your backup drive (in your example, drive A) included the iTunes Library files, you can open the library by following these steps:
iTunes: How to open an alternate iTunes Library file or create a new one
http://support.apple.com/kb/HT1589
If the hard drive did not include the iTunes Library files, but instead just the music, you may wish to re-link or re-import the music:
iTunes 11 for Mac: Import music and video already on your computer
http://support.apple.com/kb/PH12285
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
Thanks,
Matt M.

Can't eject USB modem (Vodafone) - MAC OS crash

Hi,
I have recently purchased a USB modem for mobile broadband from Vodafone Australia. When I plug it into my Macbook (Intel Core 2 Duo running OSX 10.5.8) the modem appears then automatically disappears from the "DEVICES" tab on the Finder. It also disappears from Disk Utility and the Desktop, so I can't find a way to eject the modem when I'm done. If I unplug it, the computer freezes, with a black shade coming down and telling me that I have to turn off the computer. Any ideas how to fix this?
Thanks for any help!
Eric

I had a problem that might be related to yours: after I unplugged my fax modem there was a 30-second timeout delay before my iMac (OSX 10.6.5) would go to sleep. The problem went away when I "deleted" the modem:
System Preferences | Print & Fax | Select Fax Modem | –

Apple USB modem crashes Mac Pro (MacPro3,1) ???

(1) After plugging an Apple USB modem into one of the rear USB ports of my (new) Mac Pro I get weird crashes (sometimes 2, sometimes 10+ a day; sometimes the grey "curtain" falls, sometimes the machine simply freezes with no other symptoms). Here is an example crash report:
Sun Mar 22 01:11:51 2009
panic(cpu 7 caller 0x001A9C68): Kernel trap at 0x00426a5e, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x000000a8, CR3: 0x017b5000, CR4: 0x00000660
EAX: 0x1a978a80, EBX: 0x1a977c80, ECX: 0x00000000, EDX: 0x00000000
CR2: 0x000000a8, EBP: 0x91c3bc58, ESI: 0x1a0e5480, EDI: 0x19f78f40
EFL: 0x00010203, EIP: 0x00426a5e, CS: 0x00000008, DS: 0x199c0010
Error code: 0x00000000
Backtrace (CPU 7), Frame : Return Address (4 potential args on stack)
0x91c3ba38 : 0x12b4f3 (0x45b13c 0x91c3ba6c 0x1335e4 0x0)
0x91c3ba88 : 0x1a9c68 (0x464700 0x426a5e 0xe 0x463eb0)
0x91c3bb68 : 0x1a038d (0x91c3bb80 0x0 0x91c3bc58 0x426a5e)
0x91c3bb78 : 0x426a5e (0xe 0x48 0x10 0x10)
0x91c3bc58 : 0x5a8431 (0x1a977c80 0x19f78f40 0x1 0x5b9864)
0x91c3bcb8 : 0x5ac85f (0x19867000 0x19f78f40 0xd1bffb 0x0)
0x91c3bd18 : 0x8a8432 (0x19e0e000 0x19f78f40 0xd1bffb 0x0)
0x91c3bd88 : 0x8a84fc (0x19f8f800 0x2 0x1 0x60)
0x91c3bdb8 : 0x8a65f6 (0x19f8f800 0x60 0x1 0x5b3da7)
0x91c3be18 : 0x5a61a1 (0x19f8f800 0x23 0x0 0x19c7b460)
0x91c3be68 : 0x5b5a12 (0x19867000 0x19aeaa80 0x0 0x19c7b460)
0x91c3be98 : 0x84a220 (0x19867000 0x1a86a600 0x0 0x17ba300)
0x91c3bed8 : 0x84b9c8 (0x19867000 0x91c3bf14 0x19aff7 0x0)
0x91c3bef8 : 0x84e8d5 (0x19867000 0x2 0x96 0x90bec4f8)
0x91c3bf18 : 0x4224ff (0x19867000 0x199fda80 0x7e 0x19eb5b)
0x91c3bf68 : 0x42165c (0x199fda80 0x1a0ac40c 0x1a0ac3e4 0x1a02a7)
Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleSM56KUSBAudio(1.9.15)@0x89d000->0x8b7fff
dependency: com.apple.iokit.SM56KUSBAudioFamily(1.6.0)@0x886000
dependency: com.apple.iokit.IOUSBFamily(3.2.7)@0x5a2000
com.apple.driver.AppleUSBUHCI(3.2.5)@0x844000->0x851fff
dependency: com.apple.iokit.IOPCIFamily(2.5)@0x618000
dependency: com.apple.iokit.IOUSBFamily(3.2.7)@0x5a2000
com.apple.iokit.IOUSBFamily(3.2.7)@0x5a2000->0x5cafff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9G55
Kernel version:
Darwin Kernel Version 9.6.0: Mon Nov 24 17:37:00 PST 2008; root:xnu-1228.9.59~1/RELEASE_I386
System model name: MacPro3,1 (Mac-xxxx88C8)
(2) Now, if an Apple USB modem doesn't work, what are my options to send & receive faxes w/ this machine?
TIA, Harald

Yes, this is true. I use a iMac8,1 whit the same symptom. The Modem is used to receive faxes direct to the mac. We use the standart fax software from apple. i can work for days whit out crashes. But then... I wish some one at apple would take care of it...
Fri Apr 17 11:35:33 2009
panic(cpu 0 caller 0x001A9C68): Kernel trap at 0x00426b7a, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000000, CR3: 0x01333000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x07afc300, ECX: 0x00000001, EDX: 0x00000001
CR2: 0x00000000, EBP: 0x5b61fe98, ESI: 0x07afc350, EDI: 0x07afc300
EFL: 0x00010246, EIP: 0x00426b7a, CS: 0x00000008, DS: 0x07810010
Error code: 0x00000000
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x5b61fca8 : 0x12b4f3 (0x45b13c 0x5b61fcdc 0x1335e4 0x0)
0x5b61fcf8 : 0x1a9c68 (0x464700 0x426b7a 0xe 0x463eb0)
0x5b61fdd8 : 0x1a038d (0x5b61fdf0 0x216 0x5b61fe98 0x426b7a)
0x5b61fde8 : 0x426b7a (0xe 0x7810048 0x5b610010 0x3d0010)
0x5b61fe98 : 0x932a00 (0x7afc300 0x1 0x5b61ff18 0x53f0c0)
0x5b61fed8 : 0x59a173 (0x7afc300 0x1 0x5b61ff08 0x3ec260)
0x5b61ff28 : 0x5a9a12 (0x6bc9000 0x6fff480 0x0 0x7477810)
0x5b61ff58 : 0x5a999a (0x6bc9000 0x7afe180 0x5b61ff78 0x1a336f)
0x5b61ff78 : 0x13eed2 (0x6bc9000 0x7afe180 0x1a336f 0x6baee40)
0x5b61ffc8 : 0x1a017c (0x0 0x0 0x1a30b5 0x861fa78)
Backtrace terminated-invalid frame pointer 0
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleUSBUHCI(3.2.5)@0x92b000->0x938fff
dependency: com.apple.iokit.IOPCIFamily(2.5)@0x619000
dependency: com.apple.iokit.IOUSBFamily(3.2.7)@0x596000
com.apple.iokit.IOUSBFamily(3.2.7)@0x596000->0x5befff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9G55
Kernel version:
Darwin Kernel Version 9.6.0: Mon Nov 24 17:37:00 PST 2008; root:xnu-1228.9.59~1/RELEASE_I386
System model name: iMac8,1 (Mac-F226BEC8)

How to use 3110 as a usb modem in Mac

Similar Messages

Maybe you are looking for