How to use 9871 RS485 card in scan mode in PXI-7813R (Reconfigurable IO)

I would like to use 9871 in scan mode in RT code rather than writing FPGA code.
Plese find the attached snapshot of RT project.
Attachments:
9871_InFPGA mode.png ‏13 KB

Hello craige,
There isn't any reason the module won't show up properly in MAX. This is probably just a software configuration error. Do you have Scan Engine support installed on the system? Did you specifically install the NI 987x serial support on the RIO? This can be done from the add/remove software window.
Cheers!
TJ G

Similar Messages

How to use itunes gift card to buy apps on ipad 2? Do I need a credit card for it?

how to use itunes gift card to buy apps on ipad 2? Do I need a credit card for it?

I'm sorry, but there is nothing that I can do to help you with this situation. I don't know why, but many people have problems when they try to buy gems in the Clash of Clans game. Personally, I wouldn't touch the game with a ten foot pole, but that's just my opinion.
You will have to contact iTunes Store Support and ask for their help. You can email them from here.
https://getsupport.apple.com/Issues.action

How to use sbi debit card for itune purchase

HOw to use sbi debit card for purchasing items from iTunes store?

Assuming that you are referring to SBI debit cards in India, then going on this thread you won't be able to Re: can i download from itunes using debit card in india ?

How to use a secondary monitor in Portrait mode

Finally discovered how to do this. Here is how to use a second monitor in portrait mode:
Open System Preferences from your iMac dock.
Click Displays - Click Arrangement - Click Gather Windows - the secondary monitor dialog box opens.
Click Rotation - Click 90 degrees rotation for PORTRAIT MODE.
Click CONFIRM on the secondary monitor to keep Portrait mode.
Select the desired resolution. I chose 1200 x 1920.
You'll see a dialog box that says, "About to change the display mode."
Click OKAY.
Click Confirm. (If it appears. For some resolutions, I did not have to click confirm, most likely because the monitor supports those resolutions.)
Then resize the windows of the software you're using.
Done!

I too got the same. Both monitors went portrait. Then I unchecked the 'Mirror Display' option in the Arrangment tab of iMac display and voila. Got what I wanted.

HT5057 iTunes account attached to debit card. How to use iTunes gift cards without charging debit card?

Hey everyone! I have an iTunes account and attached to that account I have a debit card. I recently got some iTunes gift cards and would like to use them as the main source to fund purchases until they run out and then go back to using my debit card. How do I do this? Do I have to delete my debit card info and add the gift card info or is there a way to keep the debit card info listed but use the gift cards first?
Thanks so much for all your help. Not sure how to retrieve any disscussions but I'll figure it out somehow.

You can redeem iTunes gift cards by clicking "Redeem" under Quick Links at the top right of the iTunes store.
Gift card credit is automatically used before your debit card, so there is no need to remove it. After your credit is used your debit card will be charged again.

"How to use an Appplicom card with Labview and a Seimens PLC"

Hi, I am using an applicom card type PCI1500-PFB to communicate with a Seimens S7-300 CPU315-2DP plc. I am using this simply to display in a labview front panel the outputs of the plc and may in the future use switches on the front panel to control the inputs of the plc. How do I do the communication? I have setup the applicam card and have comms with the plc I think. I am trying to use data socket to communicate to the plc via the applicom card. Any suggestions?
Thanks
Tom

There�s a fair bit of documentation on NI�s site regarding the Applicom card.
The following doc does a pretty good job summarizing Applicom's PCCONF and PCINIT, and the use of ReadWait and WriteWait to ensure you�ve got communication with the between the PLC and the Applicom card:
http://zone.ni.com/devzone/conceptd.nsf/2d17d611efb58b22862567a9006ffe76/5913e03f551de3f786256a32005b4586?OpenDocument
Since it doesn�t sound like you�re using the LV DSC module, you can stop reading once it gets into connecting to Lookout Objects.
Once you�re sure you�ve got comm, you can do some quick tests in LabVIEW using front panel datasocket connections as shown on page 11-12 of the following:
http://www.ni.com/pdf/manuals/323241a.pdf
From there, it all depends on
the complexity of your system. If simple, you could just stay with front panel connections, or you could move to programming with the Datasocket Read and Write functions.
... and if you get to the point that Datasocket is too slow and cumbersome, you might want to look at the LV DSC module:
http://ni.com/labview/labviewdsc/what_is.htm?node=10418
=====================================================
Fading out. " ... J. Arthur Rank on gong."

How do use my redeem card if it continues asking for security code?

How do I use my redeem card if it continues asking for a security code?
how do i remove the security information in visa , or mastercard and use a redeem card

It's not entirely clear what type of card you are attempting to use, but not all payments methods are accepted in all countries.
http://support.apple.com/kb/HT2001

How to use a GPIB card's LabView drivers to communicate with the card?

I have an axiomtek AX4810P PCI-GPIB card and i have aquired LabView drivers from the manufacturer.
This has put VI's for the GPIB functions on the 'user palette' but i can't work out how to use them to communicate with the card. can anyone help? please.

LS,
Thank you for contacting National Instruments.
Unfortunately, since you are not using a National Instruments GPIB card, I do not have access to the drivers that were provided to you by your card's manufacturer. I would suggest contacting Axiomtek directly to obtain support using their drivers.
However, I did write a small VI that demonstrates how to use similar National Instruments drivers with a National Instruments GPIB card. Keep in mind, this example VI is not intended to work with your particular card. The drivers you obtained from Axiomtek may have similar functions, however, and you can use my VI as a guide. My VI allows you to send a command to an instrument at address 2 on the GPIB card.
Hope this helps!
Matthew C
Applications
Engineer
National Instruments
Attachments:
GPIB_Communication.vi ‏23 KB

Itunes - How to use a credit card with a remaining gift card balance

In iTunes, I'm running into an issue where I have a gift card that is tied to my account and i have 4$ left on the card. I want to buy a song using my credit card, and I have successfully entered my credit card information into my account, but I don't know of a way to explicitly buy a iTunes song and charge my credit card rather than having it pull from my gift card's remaining balance.
Please let me know if there is explicitly charge your credit card even with a remaining gift card balance. In recent songs that I've bought, iTunes has been automatically defaulting to use my registered gift card rather than the credit card I have on file.

I'm having a similar issue: just redeemed a gift card for $25. I can see it in the upper right corner. Yet when I select a song to download, I am (again) asked to sign in and select a credit card to use. I don't want to use a credit card, I want to use the $25 card. This hasn't happened to me before now. If I click the 'redeem gift card' option in the credit card screen, it correctly says that that card has already been redeemed.

How to use magnetic stripe cards

hello everybody,
I have a work to do. I have to develop a project using Magnetic Stripe Cards in java i want to know few things:-
1) Can i use Magnetic Stripe Cards in Java.
2) what are things required to develop the projects
3) Is there any specific format in which data is written on card
plz help me
thank you

Hi Prateek,
1) Can i use Magnetic Stripe Cards in Java.
YES
2) what are things required to develop the projects
Magnetic stripe Reader or writer
Once you get the bytes in the tracks, you can manipulate through java code.
3) Is there any specific format in which data is written on card
plz help me
http://www.answers.com/topic/magnetic-card
This forum does not address your problem. I am not sure where it is discussed.
Good luck!
Rajesh

How to use Reader in non-interactive persistent mode to convert PDFs?

How to use Adobe Acrobat Reader in non-interactive and persistent mode to convert PDFs to PostScript (or even better, bitmapped image files) ?
At present, I'm using
acroread -toPostScript indir/*pdf outdir/
to convert a set of PDFs to PostScript (the platform is Solaris on Sparc).
These PDFs arrive at varying rates at arbitrary intervals and I'd like to avoid the overhead of startup of the acroread process and loading of the fonts etc. I would like the acroread process to become persistent and that it should convert the PDFs either as and when they become available or on demand (ie upon receipt of some signal or message).
In the words, the usage is similar to that used by web browsers, which is effectively a client of the rendering service provided by the Adobe Acrobat Reader running in the background.
The only difference is that I need the output in a file (or set of files), either bitmap or PostScript.
Any help / pointers on how to do this would be greatly appreciated.
Thanks and best regards.

Hello,
As I understand, you would like to setup a watch folder which will be getting pdf files in arbitrary intervals. You then want each pdf to be converted to ps in a separate folder.
You could achieve this with the help of a script by polling for pdf files present in the watch folder. When you find pdf files, convert them to ps, save the ps file in another folder and then move the pdf to another folder.
In any case, once the process of conversion of pdf to ps is over, acroread will quit.
There is no way to keep the acroread process running in background and convert pdfs as and when they are available.
Please let me know if this answers your query.
Regards,
Rishi

Hi i am using personal hot spot before updating 6.1.3.now iam using ios 6.1.3 version the personal hot spot is not working..can you please help me on this?how to use that,its in a default mode?

Hi previously i use personal hotspot,after updating my 6.1.3 ios in india iam not able to use that.It is in a default mode.
Can you please help me how to use personal hotspot.
Thanks,
Goutham.

Im really good at programming but really suck at algorithms
>If your are 'really good' at programming, you will be able to solve this problem. Because, it has nothing to do with algorithm.
>>can someone please please write in a algorithm form for me , i need it by friday i would greatly be thankful for u
>Wrong person, in the wrong place.

How to use another SIM card with my AT&T Iphone

I have to go in france and use a French office' sim card from another provider than AT&T. But here, I've got all my professional, and private, mail box and conatct on it.
How have I to do in order to use this other sim card in my Iphone? I don't want to buy another cell phone for only few weeks in year !
When I was in france my provider was agree to unlock my old iphone before leaving the country. that's why that was easy for me to use it in US with an AT&T sim card. But now, they change my oldest 3g with a new one, it is impossible for me to have the same situation ...
and I'm a AT&T customer since more two years ...

There is no way to use a phone locked to AT&T with another provider. AT&T does not unlock iPhones for anyone. Ever..

HT1689 How to use iTunes gift card instead of debit card on file

Our iPad has a debit card used to purchase things but r daughter has iTunes cards to purchase things on her iPod it keeps defaulting to r card. How do we change that

Does the account have a postive balance?
HT2001 itunes Gift card balance?: Apple Support Communities
If so the just delete the card. by editing the account
iTunes Store: Changing Account Information

How to use common access card (CAC) reader with Mozilla Firefox?

Please provide information on how to update Mozilla Firefox settings to allow common access card (CAC) reader digital certificates, thank you.

Try this thread:
* [/questions/752709] Having problems configuring FireFox to use a CAC reader

How to use 9871 RS485 card in scan mode in PXI-7813R (Reconfigurable IO)

Similar Messages

Maybe you are looking for