HOW TO USE A CONDENSER MIC ON SOUND BLAS

HI WELL I HAVEN'T BEEN ABLE TO USE MY MIC (SHURE BETA 87 ) <CONDENSER MIC> IT SAYS THAT SOUND BLASTER WAS DEFAULT TO USE IT BUT SINCE A MONTH THAT I HAVE PURCHASE S BLASTER 2 ZS I HAVEN'T BEEN ABLE TO DO SO ANY BODY HAS ANY SOLUTIONS TO THIS PROB...........

You need a DI-box (onstageequipment but cheap), or mixing desk(PA not nessesary). (phantomvoltage is normally 48V, be careful not to put 48V= on da Soundblaster, it'll probably don't like it
-Dynamic mics (for soundblaster mic in) are robust units that require no batteries or other power source. and are generally used & loud rock-'n'-roll instrument applications. Good feed-back rejection.
-Condenser mics have a much higher degree of finesse & accuracy but require "phantom power" (normally a 48v. supply provided by the mixing desk). Generally used for Orchestral instruments and critical recording applications.
NB. Condenser mics are fragile and expensi've ....... Don't drop them!!Message Edited by www_96KHz_tk on 05-3-2005 03:55 AM

Similar Messages

  • How to use audio and mic with multipoint server with out it crashing on you

    how to use audio and mic with multipoint server with out it crashing on you when i use them to make calls thru my station (zero client) at the same time it crashes on me and i need to restart the multipoint is there a setting i may have mist that enable's
    them to work at the same time and if posible can i use a non USB device 

    Look for "Single Sign-on Using Kerberos in Java" in google or on Sun's web site. Maybe this paper will help you.
    Claude

  • How to use Airport Express as a sound output device

    Guys,
    Is there a way that I can use Airport Express as a sound output device? So, I can play all the sound on my HIFI.
    thanks in advance

    In order to listen to the non-iTunes audio streams through your Airport Express you will need to use the third party software Airfoil.
    http://www.rogueamoeba.com/airfoil/
    iFelix

  • MXL Mic Mate using analog condenser mic recording in FCP6 Voiceover tool...

    Hmm. I cannot select any sample rate higher than 1600khz... what is the deal? I am running 10.4.11 and the 6.0.4 version of FCP... anyone seen this bug before? I CAN record in Soundtrack @ 48k and also using other USB Mic's... Other mic's plugged into the Mic Mate also do not register in FCP as being able to go over 16k though. So this leads me to believe that FCP isn't letting me record at a higher sample rate since the same setup with Soundtrack is successful.
    -Micah

    Well, it seemed to be a USB power issue. The "mic mate" supplies phantom power to any mic over USB so that you can record without a preamp or using the deck/camera trick. Turns any analog mic into a USB mic, I know, not the professional best choice but I gotta work with what they give me. Basically once I left everything off the USB ports, including the cinema display hub, it worked like a charm to change the sample rates. Possibly the cable run 10 meters or so? Not sure, once I got FCP to accept 48k it stuck, even after I plugged back in the USB essentials, I cannot change it again... But hey it is what I needed anyways... Is there anyway in Mac world to increase the USB power? And yes, I know about line and mic inputs... But also, thank you for responding, I know there is a massive flood of un-knowledgeable people on here... I wish I had time to help others as well. Possibly in the future.

  • How to use virtual device ID with sound function?

    We use N computing devices which allow us to acess one desktop by many users. We came across a problem while  recording sound through these  N
    Computing devices because sound function gives an error of invalid device iD. Please suggest a solution. 

    Anagha G. wrote:
    We use N computing devices which allow us to acess one desktop by many users. We came across a problem while  recording sound through these  N
    Computing devices because sound function gives an error of invalid device iD. Please suggest a solution. 
    Can you elaborate. Perhaps post your code or part of it to show the problem
    Ps by code I do NOT mean some picture of your coding
    Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
    (Sorry no Labview "brag list" so far)

  • Do i need phantom power for a condenser mic to use with garageband?

    i have learned condenser mics need phantom power. if i would hook up a MXL 900 series condenser to my MacBook via an XLR to 1/8" cable, would it work? does garageband have some sort of amplification plug-in? or would i need some sort of mixer or otehr phantom power device for it to work?
    MacBook 2.0gHz (White)   Mac OS X (10.4.8)  

    condenser mics need phantom power to work at all, it has nothing to do with amplification.
    you need an interface or mixer that supplies phantom power, or an external phantom power supply to use your condenser mic.

  • How to use external Microphone in Logic pro 8?

    I am trying to use a condenser mic with interface (blue iclcle USB) and all I am getting is the internal mic. Does anyone know how to change this?
    Thanks L

    Hi Leza2unes,
    Have you selected the device (blue ice USB) from within Logic itself?
    Here are a few ideas to get you going. This is assuming that you have installed any drivers needed for the USB device you are using.
    Logic Preferences> Audio> devices tab then, "core audio" tab make sure "Core Audio" is selected in the check box and that you see the "Blue Ice" (or something that relates to the name of your device)in the drop down menu next to the word "device".
    Hope that helps,

  • I can't read Or write I have been using the iPad With the accessibility icon Is there a video help them teach me how to use it more efficiently

    I cannot read or write I have been using the iPad With the accessibility icon  Is there a video to help teach me To learn how to use this accessibility more efficiently

    It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
    First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
    http://www.adwaremedic.com/kb/baddns.php
    http://www.adwaremedic.com/kb/hackedrouter.php
    If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
    As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • How to use a recorded sound in voice memos as a ringtone.

    How to use a recorded sound in voice memos as a ringtone.

    You may have better luck dumping those to computer and using an application that includes the ability to scrub.
    Try the Mac App Store for choices.

  • How to use at the same time the audio sounds of a keyboard & the midi sounds with mainstage

    Hello! hope you can shed some light on my problem! I want to be able to use at the same time the real sounds of korg sv-1(stage keyboard, but it could be any stage piano with USB midi) and use other sounds from mainstage. Of course i switch between patches and sets with a footpedal so i can be quick with my changes of sounds so I try to keep my hands on the keys.
    My question is: Is there a way that one moment for example i have a silend patch (from mainstage) and the real sound i want passing through audio and the next moment silence from korg and the next patch a sound from mainstage? Or even combine them. I mean in general how am I able to integrate the sounds I prepared and organised in patches in mainstage with the beautiful piano & rhode sounds of my sv-1?
    thanx in advance for your response!

    Yes. To have a silent Mainstage patch, simply do not create any instrument channel strips. To have the SV-1 silent on a patch you should be able to set and save the volume for that patch to 0. As an alternative you could turn local off on the SV-1( this function will reset to local on after the SV-1 has been turned off). With local off you can determine with each Mainstage patch whether or not you want to transmit MIDI to the external instrument(SV-1) channel strip. If you have local on, be careful not to create a MIDI feedback/loop with the SV-1. This is a lot of info to digest at once, so take it slowly, step by step. Snapshots below are somewhat in order.
    Click on the cog wheel in the upper right corner of the channel strips section to get to this menu. Select add external instrument channel strip.
    The external channel instrument strip will look like this.
    Click on the MIDI output box to show the display below and choose your external keyboard destination(SV-1).
    In the channel strip inspector you can send patch changes to the SV-1.
    Here is where you select the MIDI input for routing MIDI to the SV-1. If want no SV-1 sound for this Mainstage patch, select none.
    You'll need to play with these parameters to get the desired results. Stepping through the MS patches with a footswitch can be done, too, but that can wait for now. Post another question when you master these steps.

  • How to use pianoteq sounds in logic pro?

    How to use pianoteq sounds in logic pro? I've got an iMac 3.6 Ghz., intel core i5, OS 10.8.5. I want to be able to use my Bluthner piano sound (which is an add-on in pianoteq) in Logic Pro X (10.0.4).
    Thanks,
    Peter.

    Hi
    Try this in a new empty project:
    In the New Tracks box select a software instrument track, and un-check the Open Library box
    You will see a track plus the channel in the Mixer
    Click on the Input  "Inst" button, and you will see a menu like this
    Correctly installed 3rd party 64bit AU plugins will be in the AU Instruments sub-menu.
    CCT

  • How to use Mic instead of Line-In as audio inp

    How can I configure the Mic port (pink color) as the input instead of using Line-In (blue color) on?ceati've emu0k audio processor (wdm) ?

    CrystalK wrote:
    How can I configure the Mic port (pink color) as the input instead of using Line-In (blue color) on ceati've emu0k audio processor (wdm) ?
    Depending on software you're using (creative (surround) mixer or windows play/recording controls) you just need to un-mute the microphone source channel and set the recording device to microphone.
    jutapa

  • HT1343 how to use the options with F10, F11, F11 for turning the sound up or down or mute?

    Hi, I'm Hannah. I'm using a Mac. Can you show me how to use the options with F10, F11, F12 for turning the sound up, or down or mute? Thank you very much

    Normally simply pressing them should do what you want, F10 to mute; F11 to decrease volume; F12 to increase volume. However, it's possible that you have a box ticked in Keyboard preferences which modifies the behaviour of the keys, requiring you to also hold down the Fn key (bottom left key on the keyboard) to enable the function.
    Check System Preferences>Keyboard to makes sure the box indicated in the image isn't ticked.

  • How do I have my phone Make sound when using "Find my phone" app

    How do I have my iPhone make sound when using "find my. Phon" app?

    You can have the app send you an email when it is found, and you can set your email tone under settings-> sounds

  • How to use X-Fi Effects without selecting SB as the default sound device?

    How to use X-Fi Effects without selecting SB as the default sound device?Hello everyone,
    That's my situation.
    I have Sound Blaster X-Fi Go sound card and I am using SRS HD Audio Lab. SRS HD Audio Lab was selected as the default audio device and X-Fi effects (X-Fi CMSS-3d, Equalizer etc.) was working without any problem in Windows Xp. I have Windows 7 now and when i select SRS HD Audio Lab as the default device, Creative effects are not working, i must select "SB X-Fi Go!" to get them working but i can't use SRS HD Audio Lab in that case. SRS is also using SB X-Fi Go sound card as the output and volume adjustment on console launcher is working but something is disabling the effects. Any solutions to enable effects ?
    Thanks.

    If the kernel modules for your sound card and webcam both support the index parameter (use modinfo to find out) then adding
    options <name_of_preferred_card's_kernel_module> index=0
    options <name_of_second_card's_kernel_module> index=1
    to /etc/modprobe.d/modprobe.conf (or another modprobe conf file of your choice) should solve the problem.

Maybe you are looking for