How to use a customer exit in WebI

Hi expert,
I read from official SAP document that customer exit variable are supported within WebI query.
I created an universe based on a query bex. In this query I use a variable exit for 0calmonth2.
Within the WebI universe I don't see any variable.
How can I use/build a customer exit variable in my WebI query?
System feature: BO 3.1
Many Thanks.
Claudia

Hi,
I havethe same issue, even though I place the user exit variable in Filter section, its not working as expected in WEBI/crystal.
the variable that i have created will assign default value as sysdate.its working fine BW.
Are there any extra settings at BEX/BW level which have to be set before using user/sap exit variables in webi/crystal?
How should the user/customer exit variables be defined in order to get them carried properly to webi or crystal, I mean what should be the properties set for these variables?

Similar Messages

How do I find customer exits quickly using SE80,SE81 or other transactions?

Hello all,
Is there a way of using SE80 or SE81 or any other transaction for that matter, to quickly find customer or user exists being used within a given program rather than doing a global search for CALL CUSTOMER within the program? Example, transaction EG31 (Installation Full) which runs the program SAPLE30D.
In SE80 there seem to be no reference to user or customer exits. As for SE81 I was unable to relate SAPLE30D with an application component, or at least I don't know how to do it.
In the Repository Info System (SE81 also) there is a reference to customer exits, but, you MUST know which project is tied to your program, otherwise you'll be chasing your tail!
I guess you can say the easiest way would be to do a global search in the program using the CALL CUSTOMER key words.
Well, I tried that too. The first set of results pointed to INCLUDES which turned out to be empty exits! That is, no code. So, by pure chance and unknowingly, I stumbled upon a customer exit which was the source of my errors. How I did it, I cannot remember. But the problem is that this exit was hidden in a program which was called by SAPLE30D at a later stage.
So, all this searching took a long time and more importantly, it was a lucky find. Not a methodic approach.
So the question is: How do I find customer exits quickly using SE80, SE81 or any other transaction for that matter?
Your help is greatly appreciated.

edited
Edited by: abhinay chelamcherla on Feb 24, 2008 9:49 AM

How to make BEX Customer Exit Variable inactive through Customer Exit Code

Hi,
I had created two variables VAR1 and VAR2 as Customer Exit variables
If VAR1 is entered then it should automatically make the VAR2 as NO Entry Variable.
vice versa also required.
can u help me with any code in CMOD so that we can make it inactive through Customer Exit Code.
Thanks in Advance.
Sunil.

What i want is not commenting the code
I want to make the BEX Variable as inactive by using the Customer Exit Code
EX : If value in VAR1 is entered then VAR2 should become automatically inactive.
If value in VAR2 is entered then VAR1 should become automatically inactive.
how can this be done
Thanks in advance.
Sunil

Create Navigation path in IDT4.0 and how to use these navigation paths in Webi report

Hi All, I want to know how to create navigation path in universe? I am using IDT BO4.0 SP4 and relational connection and want to create navigation path. I would like to know how to use this navigation path in Webi report? If I create a webi report where can I see my navigation paths and how to use it. If you can give any document or link which expalins this whole process, that would be great. Thanks,

HI REMI ,
1. ANSWER TO YOUR 1st QUESTION i.e. HOW TO CREATE A NAVIGATIONAL PATH :
    IN IDT 4.0 , YOU WILL FIND A NAVIGATIONAL PATH IN BOTTOM WHEN YOU WILL OPEN YOUR      BUSINESS LAYER , THERE YOU CAN CLICK CUSTOM NAVIGATION PATH -> THEN CLICK AT      ADD A NAVIGATIOAL PATH BUTTON->THEN GIVE NAME NAVIGATIONAL PATH NAME->THEN ADD THE OBJECTS UNDER YOUR NAVIGATIONAL PATH IN A HIERARCHICAL SEQUENCE .     FOR EX :     COUNTRY->STATE->CITY . AND YOUR CUSTOM NAVIGATIONAL PATH IS     CREATED.
2. ANSWER TO YOUR SECOND QUESTION WHAT IS THE USE OF NAVIGATIONAL PATH IN WEBI REPORT :
NAVIGATIONAL PATH HELPS YOU TO PERFORM DRILL DOWN ON YOUR DIMENSION OBJECTS , FOR EX : LET 'S SAY YOU CREATED A NAVIGATIONAL PATH- REGION SALES : Containing COUNTRY->STATE->SALES. THIS WILL HELP YOU TO DRILL DOWN IN YOUR WEBI REPORT AS SHOWN BELOW :
COUNTRY                      SALES
INDIA                             $1000000
(after clicking INDIA you will get below structure in your Report)
STATE                           SALES
DELHI                             $600000
ANDRA-PRADESH          $200000
MAHARASHTRA             $200000
(after clicking MAHARASHTRA you will get below structure in your Report)
CITY                              SALES
MUMBAI                         $150000
NAGPUR                        $ 50000
ACTUALLY , DRILL - DOWN AS THE NAME SOUND HELP TO DRILL THE DIMENSION TILL ROOT LEVEL & SEE THE MEASURES VALUES ASSOCIATED WITH THOSE VALUES LEVELS.
1ST LEVEL WILL ALWAYS CONTAIN THE SUM OF THE MEASURE OBJECTS
CHEERS ,
KAPIL

HOW TO CREATE A CUSTOMER EXIT VARIABLE

<Moderator Message: use lower case letters next time, we don't want you to shout. --> see rules of engagement>
hi,
How to create a customer exit variable..!
in a query designer i have created the customer exit variable ,in the cmod i have created the project
for the exit rsap0001 and kept the break-point....but when i executing the query via BEX-Analyzer
where control not stoping in the break-point..
can any one help me ..what is the approch i need to do.because i new to BI..
Regards,
shahina.....!
Edited by: Siegfried Szameitat on Dec 17, 2008 10:37 AM

Hi Shahina,
1. Create formula variable var1 from to date using replacement path.
2. Create another formula variable var2 for current date using customer exit or you can use standard
formula variable for current date
3. Create calculate key figure ckf using var1 & var2.
ckf = var1 - var2.
Thanks == points
Regards
Sudheer
Edited by: SUDHEER on Dec 17, 2008 10:41 AM

How to use the customer types in customer master data

how to use the customer types in customer master data?
menu path is Extras -> account group info -> customer types

hi,
This is an option given to you to choose (if you need to) the way you perceive this customer.Here you get options including ompetitors,Salespartner, prospect,
default sp ,consumer.
See it helps you to differentiate between prospect(which you may use for quotation or inquiry purpose)Sales partner and the competetor.
I hope this clarifies your quiery.Reward points if so.
Thanking you,
Best regards,
R.Srinivasan

How to Write a CUstomer Exit for a variable in BEx

Hi,
How to write a customer exit variable in bex Query designer
Do i need developers key for this (If so what type of key do i need so that i can ask basis tean to generate)
Info Object: ZEXP_DTE (Expiry Date)
Variable on ZEXP_DTE :
ZEDTE
Type: Customer Exit
Can any one please tell me how to write a code in CMOD from this (Step-by Step)
Expiry Date > Current Cal Day
As arun said
'l_s_range-low = SY-DATUM.
l_s_range-opt = 'I'.
l_s_range-sign = 'GT'.
APPEND l_s_range TO e_t_range.'
I want to insert the above code for the above customer exit but as i am new to BW as ABAP please explain me what are the steps involved in CMOD
Thanks

Hi,
To write customer exit for a variable, you require Access key.
Contact your BASIS to get that.
Access Key,BASIS?
To write Customer exit,
User Exits
User Exit for Variable
/thread/809285 [original link is broken]
Hope these helps u...
Regards,
KK.

How to use PPF customizing Auto GR after packing

Our Goods Receive Business scenario is
1. Filled Batch in EWM Inbound Delivery
2. Manual Pack product to Handling unit
3. After packing, Automatic Good Receive
4. Then create Warehouse Task automatically .
Question
We want to know how to use PPF customizing Auto GR after we Pack product to Handling unit?
Can anyone help us to figure out that problem?
Thank you
Chang

Hi Faical,
I have set configuration as below, but it does'nt work.
Can you help us to figure out the reason.
We are appreciate your help!
2. Manual Pack product to Handling unit
3. After packing, Automatic Good Receive
method: /SCWM/AU_GR_POST in processing details and for schedule condition: /SCWM/WHR_FULL_PACKED.
time of processing : processing when save document
3.After packing, Automatic Good Receive
4. Then create Warehouse Task automatically
method: /SCWM/AU_GR_POST in processing details and for schedule condition: /SCWM/TO_CREATE
time of processing : immediate processing

Use of Customer Exit - IP Wad Input ready Query

Hi All,
Can anyone confirm if we can use a customer exit variable(populates a SEQ number) be used in a input layout on IP>>WAD application.
In my case it displays the seq number in the header area,but displays the "No rows or cols displayed because the axis not input readyu".
We applied the note SAP Note 1337901 - Query not ready for input if there is an empty results set;
But had little luck;
When I remove the exit variable it works fine as long it is drill-down in the rows;
Any help would be apreciated.
Thanks
Rao

My Exit variable works fine,and generates the sequence in WAD/BEX..
The problem I have is when I include teh exit var on the query/filter of the agg lvl;
The Wad screen displays the generated seq number in the header area, but turns the input grid OFF.
Thanks
Rao

How to code a custom content search web part in Sharepoint 2013?

Hi,
Do you have any idea on how to create a custom Content Search Web part? What I mean is, I will code it in Visual Studio 2012.
Regards,
Napster

check this
http://social.technet.microsoft.com/Forums/ie/en-US/13f1e581-4250-48c7-93a6-ef7ae2bb14c5/is-this-there-a-way-to-programmatically-set-the-query-text-or-append-additional-kql-filtering-to-a?forum=sharepointsearch
http://onlinecoder.blogspot.in/2013/08/sharepoint-2013-content-search-web-part.html

How to use the custom control ?

Hi Friends,
plz help to use of custom control in screen painter ?
and how to use the custom control ?
Thanking you.
Regards,
Subash.

HI,
Screen Elements
A screen can contain a wide variety of elements, either for displaying field contents, or for allowing the user to interact with the program (for example, filling out input fields or choosing pushbutton functions). You use the Screen Painter to arrange elements on the screen.
You can use the following elements:
·        Text fields
Display elements, which cannot be changed either by the user or by the ABAP program.
·        Input/output fields and templates
Used to display data from the ABAP program or for entering data on the screen. Linked to screen fields.
·        Dropdown list boxes
Special input/output fields that allow users to choose one entry from a fixed list of possible entries.
·        Checkbox elements
Special input/output fields that the user can either select (value X) or deselect (value SPACE). Checkbox elements can be linked with function codes.
·        Radio button elements
Special input/output fields that are combined into groups. Within a radio button group, only a single button can be selected at any one time. When the user selects one button, all of the others are automatically deselected. Radio button elements can be linked with function codes.
·        Pushbuttons
Elements on the screen that trigger the PAI event of the screen flow logic when chosen by the user. There is a function code attached to each pushbutton, which is passed to the ABAP program when it is chosen.
·        Frame
Pure display elements that group together elements on the screen, such as radio button groups.
·        Subscreens
Area on the screen in which you can place another screen.
·        Table controls
Tabular input/output fields.
·        Tabstrip controls
Areas on the screen in which you can switch between various pages.
·        Custom Controls
Areas on the screen in which you can display controls. Controls are software components of the presentation server.
·        Status icons
Display elements, indicating the status of the application program.
·        OK field
Every screen has a twenty-character OK_CODE field (also known as the function code field) that is not displayed directly on the screen. User actions that trigger the PAI event also place the corresponding function code into this field, from where it is passed to the ABAP program. You can also use the command field in the standard toolbar to enter the OK field. To be able to use the OK field, you need to assign a name to it.
All screen elements have a set of attributes, some of which are set automatically, others of which have to be specified in the Screen Painter. They determine things such as the layout of the screen elements on the screen. You can set the attributes of screen elements in the Screen Painter - either for a single element, or using the element list, which lists all of the elements belonging to the current screen. Some of the attributes that you set statically in the Screen Painter can be overwritten dynamically in the ABAP program.
with regards,
sowjanyagosala

How to find the customer exits for a particular transaction

hi
how to find the customer exits for a particular transaction

Hi jyothsna vankadari ,
ther is a convenient way to find all BADIS called. You may know that BADIS are the newer version of EXITs.
I would suggest you to go for BADI.
Follow the below steps to find out what all BADI's are called when you press any button in any transaction.
1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
Now
4) Execute SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any transaction.
Regards,
Clemens

How to use BO Publication to publuish web-i doc to distribution list

HI experts
How to use BO Publication to publuish web-i doc to distribution list
Ashutosh D

Hi
please take a look at the publisher's guide:
http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_publisher_en.pdf
Regards,
Stratos

How to identify what customer exit variables are used in which query?

Hi all,
When i happened to check the CMOD transaction code i can find a list of customer exits are used. But i want to know what are those customer exist are used in which query? can anyone let me know the procedure of identifying it.
Thanks a lot
Pooja

hii pooja
check the foll links
Very Urgent: Customer Exit Variable
customer exit variable
MIssing Authorisation for customer exit variable query
Authorization variable or customer exit variables
if it is helpful assign points
thanks.

How to use a custom css with a ditamap?

I'm still trying to get to grips with some DITA Frame basics and another piece of info that I would like to have is how to get the ditamap to use a custom css when it is output to xhtml with the DITA OT. Is there any simple non-super-techie way to do this without having to learn how to hack the ANT programs?
Under the StructureTools menu, there is an Import CSS styles item, but I can't find instructions on how to use it accessible to my level.
Also, is there a way to apply a company stylesheet to the Responsive html output generated with the new Publish tool? I realize the two provided templates can be modified element by element, but it does mean a lot of modification, and it would be cool if we could just invoke the stylesheets that already govern our web site so that the output could match.
Thanks to anyone who can help,
Elisa Roselli
Cambridge Imaging Systems

Hi Elisa...
The short answer is .. no.
When you publish through the OT, you're just passing control off to an Ant target and the DITA-OT processing. You'd need to modify the files in the OT to use a modified CSS. Note that the "easy" way to do this is to just edit the CSS file directly in the OT file structure. The "proper" way to do it is to develop an OT plugin and set up a new Ant target that uses your styling instead of the default. You'd change the Ant target that FM uses so it calls yours (don't recall where this is but it can be done).
One thing that may be useful to know is that when you set the value of the @outputclass attribute on an element in DITA, the corresponding tag in the generated HTML is assigned a @class attribute with that same value. This lets you set "styling" in DITA that is applied to the output. You still need to get your custom class definitions ino the CSS.
The Import CSS item on the StructureTools menu has nothing to do with OT publishing (or anything that you'd likely be using).
I'm not aware of a way to apply a stylesheet to the Publish tool .. I thnk you have to go through the process of mapping styles manually. I could be wrong, and if so, hopefully someone else will jump in to help.
Cheers,
…scott

How to use a customer exit in WebI

Similar Messages

Maybe you are looking for