How to use a dropdown in a workbook which can work in different queries?

Hi Experts,
        I have created a workbook which can display the query by using the 'Push Button'. One query is based on material analysis and another one on product analysis.
        It works good..
        In that workbook, I want to use a dropdown so that it can display the required key figure. (Note : In both the queries, key figures are same.)
        While selecting the keyfigure option in the properties of dropdown, the target data provider is not visible.
        So, pls help me to use the dropdown which can work in both the queries.
With Regards,
Yokesh Kumar.

Hi,
After fixing the error in the role I noticed that all I should do is to publish the querry in a new role.
From that moment a user that is tied to new role can read the old report using the rights associated in a new role.
Thanks for help.
Regards. Leszek

Similar Messages

I have just purchased a new iPad from apple and I don't know how to use it. is there somewhere that I can learn the basics

I have just purchased a new iPad from apple and I don't know how to use it. is there somewhere that I can learn the basics

Out of a silly curiosity, in what way did Ralph's reply solve your problem? (not that Ralph doesn't deserve recognition, mind you.)

I lost my mini iPad in Peru, Machu Pichu area and I do not know how to use the find my iPad ... can you help???? please, before the person that found it unblock and use it

I lost my mini iPad in Peru, Machu Pichu area and I do not know how to use the find my iPad ... can you help???? please, before the person that found it unblock and use it

Did you enable the "Find my..." function BEFORE you lost it?

How to use other cols in group by which does not need grouping.

HI,
saleshistory table has sales record of each empoly, day wise.
that is saleshistory has more than one record of empid in it.
empcode is number(9,0) and empname is varchar2(200), sales number(10,5),empid is number(10,0)
select empid, sum(sales), max(empname), max(empcode) from saleshistory
group by empid ;
or
select empid, sum(sales), empname,empcode from saleshistory
group by empid ,empname,empcode ;
i want to find the total amout of sales done by each employee with empid,empname,empcode in select list.
1) please tel me which method good which i should follow or is there any other good way to get it.
yours sincerely
Edited by: 944768 on Apr 20, 2013 5:14 AM
Edited by: 944768 on Apr 20, 2013 5:15 AM
Edited by: 944768 on Apr 20, 2013 5:15 AM
Edited by: 944768 on Apr 20, 2013 5:16 AM
Edited by: 944768 on Apr 20, 2013 5:34 AM
Edited by: 944768 on Apr 20, 2013 7:08 AM

Hi,
This sounds like a job for the analytic SUM function.
Since you didn't post CREATE TABLE and INSERT statements for your own table, I can't test with your table. I'll show how to do his using the scott.emp table instead. In scott.emp, there can any number of rows with the same job, just as in your table there can be any number of rows for the same empid.
SELECT       job
,       sal
,       SUM (sal) OVER (PARTITION BY job)     AS total_sal
FROM       scott.emp
ORDER BY job
;Output:
JOB              SAL TOTAL_SAL
ANALYST         3000       6000
ANALYST         3000       6000
CLERK           1300       4150
CLERK            950       4150
CLERK            800       4150
CLERK           1100       4150
MANAGER         2850       8275
MANAGER         2975       8275
MANAGER         2450       8275
PRESIDENT       5000       5000
SALESMAN        1500       5600
SALESMAN        1250       5600
SALESMAN        1250       5600
SALESMAN        1600       5600Most aggregate functions (like SUM) have analytic counterparts which can get the same results without collapsing the result set down to one row per group. The PARTITION BY clause of analytic functions corresponds to the GROUP BY clause used with aggregate functions.
944768 wrote:
... when we used GTT in Stored proc (SP) is it necessary to truncate it at the begining of sp , if one truncate can it create any harm, as SP is used by many people at the same time.This seems to be a completely separate question. Most of your message involved grouping and the SUM function; it has nothing to do with Global Temporary Tables or stored procedures. You might have an application that uses a stored procedure and a global temporary table, and which also uses groupng and the SUM function, but that doesn't mean you hve a problem that involves all of them. If the stored procedure problem has anything to do with the grouping problem, explain it. If it is a completely separate problem, then start aompletely separate thread or it (and explain it).
I hope this answers your question.
If not, point out where the query above is producing the wrong reslts, and explain, using specific examples, how you get the correct results in those places.
If you want to use your own table, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only), and the results you want from that data.
Always say what version of Oracle you're using (e.g. 11.2.0.2.0).
See the forum FAQ {message:id=9360002}

How do I delete caches in Lion and which can I delete?

How do I delete caches in Lion and which ones can be deleted?

you can delete all of them, they will be recreated as soon as the app opens again.
Clearing Local Caches
quit all open apps
open Finder press "shift+command+G" and type ~/Library/Caches
Drag all files and folders to the trash
Enter login password when prompted
Reboot
your system may seem slower after reboot, this is because the caches are being rebuilt.
Clearing Application Caches
quit all open apps
open Finder Press "shift+command+G" and type /Library/Caches
Drag all files and folders to the trash
Reboot

How to use 2 Dropdown box in webapplication for date range selection

Dear all,
I am working on a report that will show 2 drop down boxes. These should be used as a date range.
This works fine if I use 2 variables as a date range on 0CALYEAR. However I dont want the user to fill in the dates but selecting the dates with 2 drop down boxes.
I cannot manage to get this to work. I saw some comments about user exits in the forum but I cannot figure it out if there is an easier way.
Could you give me an idea of what to do?
Thanks a lot,
Andreas

Hi,
If you want the user to select the date directly rather than entering, you need not to have a dropdown menu in WAD. Directly go to the query which you have selected for the object in WAD, there create a variable with calendar. Put it mandatory, so that the user selection of the date will be mandatory. The variable will be automatically be available when you execute the template inn the browser.
Assign points if this helps u.
Regards,
Koundinya.

How to create a dropdown list to list the values from two different tables?

Hi,
I have the following requirement:
1. I have to create a dropdown list to display all the values from the second column of a table.
2. Another dropdown list to display all the values from the second column of another table.
3. A text box should help me to add the selected values.
How to get this done in a PDF? Please help.
Regards,
Latha

Is this a LC form? Because Acrobat forms have no concept of tables, just
individual fields...

How to use Airport Extreme to create a second wireless network with different IP addresses behind an existing modem/router?

Hi,
I have an existing modem/router from my ISP that does DHCP and NAT with base IP 192.168.1.1 distributed in the wireless network. I use this wireless network for our private devices. I could turn off the DHCP server in this first router, but there isn't a separate setting to turn off NAT.
I want to connect my Airport Extreme (4th gen) to this existing router to create a separate wireless network for visiting guests, where IP addresses of 10.0.0.0 etc. are used. So I do not want to use the Airport Extreme in bridge mode, as I would like to keep the devices on the first network 'invisible' for those on the second network. (P.S. when connected in bridge mode, the Airport works well and can distribute a network with a different name from the first. It's just that I would feel more comfortable about our privacy if the Airport were to distribute a different IP range. False security, maybe?)
I've tried doing this by 'Sharing a public IP address' in Airport Utility's Internet tab, leaving TCP/IP's setting to 'via DHCP', setting DHCP addresses to start with 10.0.0.2 up to 200 with all else blank, and not using a standard host nor NAT-PMP in the NAT tab.
When I do this the Airport complains of a 'double NAT issue'. Internet connectivity seems to be OK, but when switching between the two networks on my Mac I get complaints about my IP address being in use by another device intermittently.
Can anyone help in how to get the 'double NAT issue' resolved?
Thanks!

So if someone is connected to the modem/router network they will be able to see the HD I will have put in to the AirPort Extreme?
As I said above.....since the modem/router and AirPort are bridged, devices on the modem/router wireless will be able to "see" devices on the AirPort wireless, and vice versa.....
If they can see the HD connected to the AirPort Extreme, will they be able to access it
Yes, unless you plan to password protect the drive connected to the AirPort Extreme.
or will they still need the password needed to get onto the AirPort Extreme network?
The modem/router and AirPort Extreme are bridged. They are on the same network. All devices are on the same network when the modem/router and AirPort are bridged. Not sure how else that I can say this.
Also, because it is bridged, I shouldn't have any problems accessing the HD I will have connected to the AirPort Extreme from an external location?
Accessing devices from a remote location is never easy....and a topic for a different post/discussion. If you have a "static" Internet IP address from your provider, and have all the details on how to forward ports on your modem/router, you are off to a good start.
Apparently there is some addressing issues because devices can be seen as "Double IP" because the modem/router would have allocated IP's as well as the AirPort allocating IP's thus making connections slower until resolved
When you "bridge", all IP addresses are issued by one device. There will be no conflicts on the network, since they are bridged.
Once again, in very simple terms, you have two doors (access points) that open into the same room (network). One "door" is the modem/router and the other "door" is the AirPort Extreme. They are on the same network....("room") because they are bridged.

How to use payment mood for iPad because I can't access in security cod

Hi I am baljeet singh and I want to buy some app I try but I don't no how to fill payment mood . I try one time but security cod not match even I fill right cod I don't no way please help me

You are trying to use a credit card, not a debit card - there have been a number of posts recently from people whose debit cards are being declined, so I'm not sure if they are still a valid payment method (they are not listed on this page).
If it is a credit card, then is it registered to exactly the same name and address as you have on your iTunes account (including format and spacing etc) and you are currently in that country : http://support.apple.com/kb/TS1646 ? If it is then you could try what it says at the bottom of that page :
If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorisations have the correct information on file.
And/or try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

How to use BAPI extension for updating field which is not in BAPI stracture

I am doing a conversion for control cycle create. The data is maintained in DB Table "PKHD". i have to update 12 fields threre through BAPI "BAPI_KANBANCC_CREATE". there are 11 fields in BAPI structure. but 1 field called"BERKZ" is not there . How can i update it through EXTENSION.

Hi ,
in the bapi extension check one structure with name BAPIPAREX will available..
you need to pass custom structure in that..
ands conactenate 12 field of your structure and pass in to value1 in bapirex structure and append.
go to se11 and enter >bapiparex> check where it is used -->see the zprogram and check how it is used the add your code according to that..
Regards,
Prabhudas

HT201209 I went onto my computer and set up an account...I entered my gift cards where it said redeem and there is $40 on my account. However,I have no idea how to use it. I read that I can take my credit card out and just use the itunes card but again

I went into the computer and set up my account, I then went to where you enter the gift card info to redeem the money and my account says I have $40...however, when I go and try to use it I can not figure out how to do so. I also read that I can remove my credit card info and just use Itune cards...but again i can not figure out how to do this.
This is very frustrating because something so simple is turning into an all day fiasco!

Hello Brod1,
Thank you for the details of the issue you are experiencing. The iTunes Store will automatically recognize the credit you applied. You can find the details of how iTunes Store purchases are billed below:
Order of iTunes billing methods
When making purchases, content credits are used first, followed by Gift Certificate, iTunes Card, or Allowance Account credits; your credit card or PayPal account is then charged for any remaining balance.
When you buy individual songs from the iTunes Store:
Free song credits are redeemed first.
If you have no free song credits, gift certificate, prepaid card, and allowance credits are used next.
If your gift certificate, prepaid card, and/or allowance credit is less than the total cost of the purchase, your credit card is billed for the remaining balance.
If you have no free song credits or gift certificates, prepaid cards, or allowance credits, your credit card is billed for the songs you buy.
When you buy an album on the iTunes Store:
Gift certificate, prepaid card, and allowance credits are used first.
If your gift certificate, prepaid card, or allowance credit is less than the total cost of the purchase, your credit card is billed for the remaining balance. Note: Free song credits cannot be used for album purchases.
If you have no gift certificates, prepaid cards, or allowance credits, your credit card is billed for the albums you buy.
You can find the full article here:
iTunes Store: How iTunes Store purchases are billed
http://support.apple.com/kb/HT5582
Thank you for using Apple Support Communities.
Best,
Sheila M.

How to use custom forms created in SharePoint 2007 to work in SharePoint 2010

Hi,
We have created some custom forms in SharePoint 2007 (for add a New item and Edit item for some list and libraries) after migration to SP 2010 we found out thet we can use those custom forms because the document versions are 12.0.0.0 which
should be 14.0.0.0 in SharePoint 2010
Could someone please tell me if we can migrate forms from SP2007 to SP2010 as well?
I even tried to change document Version and content but still not working! Do we need to recreate those forms in SP2010?
Thanks
Kate

Hi Khojasteh,
How did you do for changing document version and content?
Whether you tried to set the forms update automatically, then re-publish them.
There are some similar posts for your reference:
Migrate Infopath 2007 to SharePoint 2010 site
Unable to open infopath forms when migrated from MOSS 2007 to sharepoint 2010
Migrate browser based InfoPath Forms with code behind from MOSS 2007 to SharePoint 2013
Plan to upgrade form templates during an upgrade to SharePoint Server 2010
Best Regards,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

How to use class in JSP page ? In java works in JSP not...

Hello developers,
I need check if URL exists.. i use this code in java.. it works fine..
import java.net.*;
import java.io.*;
public class Check {
public static void main(String s[]) {
 System.out.println(exists("http://www.google.com"));
 System.out.println(exists("http://www.thisURLdoesntexis.com"));
static boolean exists(String URLName){
try {
 HttpURLConnection.setFollowRedirects(false);
 // note : you may also need
 // HttpURLConnection.setInstanceFollowRedirects(false)
 HttpURLConnection con =
 (HttpURLConnection) new URL(URLName).openConnection();
 con.setRequestMethod("HEAD");
 return (con.getResponseCode() == HttpURLConnection.HTTP_OK);
catch (Exception e) {
 e.printStackTrace();
 return false;
}in java all works fine.. it shows
TRUE
FALSE
but i have no idea how can i implement this java code to my check.jsp page..
i tried something like this..
<%@ page import="java.io.*" %>
<%@ page import ="java.net.*" %>
<BODY>
<%
static boolean exists(String URLName){
try {
 HttpURLConnection.setFollowRedirects(false);
 // note : you may also need
 // HttpURLConnection.setInstanceFollowRedirects(false)
 HttpURLConnection con =
 (HttpURLConnection) new URL(URLName).openConnection();
 con.setRequestMethod("HEAD");
 return (con.getResponseCode() == HttpURLConnection.HTTP_OK);
catch (Exception e) {
 e.printStackTrace();
 return false;
String a="http://www.google.com";
%>
<%= exists(a)%>and i want to see in my jsp page the result.. it means that JSP page shows
TRUE
Thanks in advance,

Hi there,
One solution is to use JavaBeans and call the methods for the JavaBean from the JSP page.
Suppose you have a JavaBean called TestConnectionBean as follows:
package test22;
import java.net.HttpURLConnection;
import java.net.URL;
import java.net.MalformedURLException;
import java.io.IOException;
Set the testUrl before checking if connection exists.
public class TestConnectionBean {
 String testUrl;
 boolean connectionExists;
 public TestConnectionBean() {
 public String getTestUrl() {
 return testUrl;
 public void setTestUrl(String testUrl) {
 this.testUrl = testUrl;
 public boolean getConnectionExists() throws IOException, MalformedURLException {
 HttpURLConnection.setFollowRedirects(false);
 // note : you may also need
 // HttpURLConnection.setInstanceFollowRedirects(false)
 HttpURLConnection con = null;
 con = (HttpURLConnection) new URL(this.testUrl).openConnection();
 con.setRequestMethod("HEAD");
 return (con.getResponseCode() == HttpURLConnection.HTTP_OK);
 public void setConnectionExists(boolean connectionExists) {
 this.connectionExists = connectionExists;
}Then you can create a JSP page like this:
<%@ page contentType="text/html;charset=UTF-8" language="java" %>
<html>
<head><title></title></head>
<body>
<jsp:useBean id="testConnectionBean" class="test22.TestConnectionBean"/>
<jsp:setProperty name="testConnectionBean" property="testUrl" value="http://www.google.com" />
 
Does the connection exist for http://www.google.com : <jsp:getProperty name="testConnectionBean" property="connectionExists"/>
 
<jsp:setProperty name="testConnectionBean" property="testUrl" value="http://www.thisURLdoesntexis.com" />
 
<%-- The following will give an exception : java.net.UnknownHostException: www.thisURLdoesntexis.com since the URL doesn't exist.
--%>
<%--
Does the connection exist for http://www.thisURLdoesntexis.com : <jsp:getProperty name="testConnectionBean" property="connectionExists"/>
--%>
</body>
</html>The output you see looks like:
Does the connection exist for http://www.google.com : true
I think it is better to handle the exceptions in the JavaBean itself, so now yyou can change the method signature of getConnectionExists , remove all exceptions from method signature but handle them with a try/catch inside the method itself.

Satellite A45-S250 : How to use Recovery CD if DVD Drive is not working

Hi all ,
First , appologize for my english , i'm a french guy :)
So my problem is that i would like to re-install everything on a A45-S250 by using the recovery CD.
But the main problem is that the internal DVD drive is not running anymore.
I've try by plugging an external DVD drive, but the laptop don't want to boot on it.
I've seen that it can boot through a floppy drive, lan, or SD card. But with theses possibilities , how to be able to reinstall everything include in the recovery CD ?
I may have a usb floppy drive, so i'll be able to boot on a disk boot. but then how to start the recovery CD procedure ?
I'll prefer to use the recovery CD as a WinXP home standart, cause i know that the OEM serial won't work to a Original version of WinXP ...
Thanks for your help !
Kubs

Hi
If you want to use the Recovery CD then you would need a bootable CD/DVD drive.
Fact is that you would be not able to boot from a USB CD/DVD drive or its not possible to copy the whole stuff on the SD card and then to boot
You need an internal CD/DVD drive or external CD/DVD drive which could be connected to the PCMCIA port
For me only these two possibilities could work!

How to use the space on the form which is coming when hide the elements

Hi,
I have an issue with the white space coming when I am making subform visible/hidden using java script based on condition.
Let me explain the complete scenario. I have created an adobe form for printing invoice details, basically I have two pages, the second page is used to handle overflow content from first page and the requirement is that we should show totals section on last page only when we multple page invoice output. To do that I have written a script on second page for total sub form in such a way that the subform will be visible only on last page and will be not visible on any other page. But due to hiding the element I am getting white space in other pages which I dont want. I want to continue to print the items deatisl in that place to use that empty space.
Can you guys help me to solve this.
Thanks,
Suman

Hi Radzmar,
Thanks for your reply.I will try this option and will update you.
I have one more thing to ask. I want to give some space between rows in the table. Can you suggest me how do i achieve this.
Regards,
Suman

How to use a dropdown in a workbook which can work in different queries?

Similar Messages

Maybe you are looking for