How to use a Geotrust certificate with standalone forms/reports services

Hi!
I have successfully installed the standalone version of Oracle Forms and Reports Services (10.2.0.2). I'm trying to configure things so I can use SSL. I used Wallet Manager to create a CSR and then obtained a certificate from Geotrust. When I try to import it, I get the following message:
User certificate import has failed because the CA certificate does not exist"
I don't think I've got a CA certificate. Am I doing this process correctly for the standalone version of Forms and Reports?

Hi,
You have to import the CA root certificate into your wallet first. Check with your certificate provider.
HTH,
Jim

Similar Messages

How to use Self Signed certificate with SSLServerSocket?

Hello to all.
I'm trying to build a simple client/server system wich uses SSLSocket to exchange data. (JavaSE 6)
The server must have it's own certificate, clients don't need one.
I started with this
http://java.sun.com/javase/6/docs/technotes/guides/security/jsse/JSSERefGuide.html#CreateKeystore
To generate key for the server and a self signed certificate.
To sum it up:
 Create a new keystore and self-signed certificate with corresponding public/private keys.
keytool -genkeypair -alias mytest -keyalg RSA -validity 7 -keystore /scratch/stores/server.jks
 Export and examine the self-signed certificate.
keytool -export -alias mytest -keystore /scratch/stores/server.jks -rfc -file server.cer
 Import the certificate into a new truststore.
keytool -import -alias mytest -file server.cer -keystore /scratch/stores/client.jksThen in my server code I do
System.setProperty("javax.net.ssl.keyStore", "/scratch/stores/server.jks");
System.setProperty("javax.net.ssl.keyStorePassword", "123456");
SSLServerSocketFactory sf = sslContext.getServerSocketFactory();
SSLServerSocket sslServerSocket = (SSLServerSocket)sf.createServerSocket( port );
Socket s = sslServerSocket.accept();I am basically missing some point because I get a "javax.net.ssl.SSLException: No available certificate or key corresponds to the SSL cipher suites which are enabled." when I try to run the server.
Can it be a problem with the certificate? When using -validity <days> in keytool the certificate gets self-signed, so it should work if I'm not wrong.
I have also tried this solution
serverKeyStore = KeyStore.getInstance( "JKS" );
serverKeyStore.load( new FileInputStream("/scratch/stores/server.jks" ),
 "123456".toCharArray() );
tmf = TrustManagerFactory.getInstance( "SunX509" );
tmf.init( serverKeyStore );
sslContext = SSLContext.getInstance( "TLS" );
sslContext.init( null, tmf.getTrustManagers(),secureRandom );
SSLServerSocketFactory sf = sslContext.getServerSocketFactory();
SSLServerSocket ss = (SSLServerSocket)sf.createServerSocket( port );and still it doesn't work.
So what am I missing?

You were right. I corrected the mistakes in the server code, now it's
 private SSLServerSocket setupSSLServerSocket(){
 try {
 SSLContext sslContext = SSLContext.getInstance( "TLS" );
 KeyManagerFactory km = KeyManagerFactory.getInstance("SunX509");
 KeyStore ks = KeyStore.getInstance("JKS");
 ks.load(new FileInputStream(_KEYSTORE), _KEYSTORE_PASSWORD.toCharArray());
 km.init(ks, _KEYSTORE_PASSWORD.toCharArray());
 * Da usare con un truststore se serve autenticazione dei client
 * TrustManagerFactory tm = TrustManagerFactory.getInstance("SunX509");
 tm.init(ks);*/
 sslContext.init(km.getKeyManagers(), null, null);
 SSLServerSocketFactory f = sslContext.getServerSocketFactory();
 SSLServerSocket ss = (SSLServerSocket) f.createServerSocket(_PORT);
 return ss;
 } catch (UnrecoverableKeyException e) {
 e.printStackTrace();
 } catch (KeyManagementException e) {
 e.printStackTrace();
 } catch (NoSuchAlgorithmException e) {
 e.printStackTrace();
 } catch (KeyStoreException e) {
 e.printStackTrace();
 } catch (CertificateException e) {
 e.printStackTrace();
 } catch (FileNotFoundException e) {
 e.printStackTrace();
 } catch (IOException e) {
 e.printStackTrace();
 return null;
 }and on the client code
private SSLSocket setupSSLClientSocket(){
 try {
 SSLContext sslContext = SSLContext.getInstance( "TLS" );
 /* SERVER
 KeyManagerFactory km = KeyManagerFactory.getInstance("SunX509");
 km.init(ks, _KEYSTORE_PASSWORD.toCharArray());
 KeyStore clientks = KeyStore.getInstance("JKS");
 clientks.load(new FileInputStream(_TRUSTSTORE), _TRUSTSTORE_PASS.toCharArray());
 TrustManagerFactory tm = TrustManagerFactory.getInstance("SunX509");
 tm.init(clientks);
 sslContext.init(null, tm.getTrustManagers(), null);
 SSLSocketFactory f = sslContext.getSocketFactory();
 SSLSocket sslSocket = (SSLSocket) f.createSocket("localhost", _PORT);
 return sslSocket;
 } catch (KeyManagementException e) {
 e.printStackTrace();
 } catch (NoSuchAlgorithmException e) {
 e.printStackTrace();
 } catch (KeyStoreException e) {
 e.printStackTrace();
 } catch (CertificateException e) {
 e.printStackTrace();
 } catch (FileNotFoundException e) {
 e.printStackTrace();
 } catch (IOException e) {
 e.printStackTrace();
 return null;
}and added a System.out.println(sslSocket); after every incoming message (server side) and SSL is now fully working!
So my mistakes were:
[] Incorrect setup done by code
[] Incorrect and insufficient println() of socket status
Now that everything works, I've deleted all this manual setup and just use the system properties. (They MUST be set before getting the Factory)
SERVER SIDE:
System.setProperty("javax.net.ssl.keyStore", _KEYSTORE);
System.setProperty("javax.net.ssl.keyStorePassword", KEYSTOREPASSWORD);
SSLServerSocketFactory f = (SSLServerSocketFactory) SSLServerSocketFactory.getDefault();
SSLServerSocket sslServerSocket = (SSLServerSocket) f.createServerSocket(_PORT);
CLIENT SIDE:
System.setProperty("javax.net.ssl.trustStore", "/scratch/stores/client.jks");
System.setProperty("javax.net.ssl.trustStorePassword", "client");
SSLSocketFactory f = (SSLSocketFactory) SSLSocketFactory.getDefault();
SSLSocket sslSocket = (SSLSocket) f.createSocket(_HOST, _PORT);
And everything is working as expected. Thank you!
I hope my code will help someone else in the future.

How To Use Client Side Certificate to access the SOAP service

HI,
I am client side and need to access a remote SOAP server side using a certificate.
I don't know how to add the certificate in my Java code, although I can get it using X509Certificate. The following is my code.
Thanks for any help
public class Dash911 {
public static void main(String args[]) throws IOException {
try {
     //I have a Cert class that generate the cert
X509Certificate certificate = (new Cert()).getCertificate();
String targetURI= "http://schemas.ecs.telefinity.com/webservices/postal/";
String methodName = "FindStreet";
String encodingStyleURI = Constants.NS_URI_SOAP_ENC;
Vector params = new Vector();
     String[] names = {"Westcorp", "35805"};
     params.addElement(new Parameter("names", names.getClass(), names, null));
     String endpointURL = "https://prototype.test.telefinity.com/integrationprovisioning/postal.asmx";
     makeCall(targetURI, methodName, encodingStyleURI, null, params, endpointURL);
     } catch (Throwable t) {
     }//main
Thanks a lot

Keystore or Truststore may be rigtht the same file, the matter is how you use it
at each time: if you need to authenticate yourself (no matter wether you are a
server or a client), you will have to initiate your SSLcontext with such file
managed by TrustManager. On the other hand, you just do same but
indicating your file is shall be managed by a KeyManager.

How to use Microsoft Excel dll in SQL Server Reporting Services

Hi,
Can you please explain me the steps to use excel .dll in ssrs

Hi PrakashThandra,
Based on my understanding, you have created a chart in Excel, then you want to use this chart in Reporting Services, right?
In Reporting Services, it’s not supported to use a chart which created in Excel directly. But we can use Excel as datasource to create a report, please refer to this article:
Create SSRS report using Excel Data Source Step by Step. In your scenario, since you want to use the Excel chart in Reporting Services, you could create a same report in Reporting Services refer to this article:
Charts (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

How to deploy apllication icon in oracle AS forms & report services

Hi all
I have deployed all the oracle 10g forms on 10g AS forms & report services.
also i have updated registry.dat file for icon directory path but icons are not appering on forms.
please help me out if anybody has solution.
Thanks

You have to add an Alias in formsweb.cfg for Icons, like
Alias /icons /pathforicons/icons
Regards

How To Use Your Own Router with Out Loosing Verizon's FIOS Services

How to use your own router with Verizon’s FIOS Service
First, you need a basic understanding of how FIOS works but unfortunately there are two types of FIOS systems out there. All of the systems utilize a fiber optic cable to bring TV, phone and internet to your location over one optic cable. In addition these systems provide interactivity including widgets, remote DVR, movies on demand and so forth via an IP (Internet Protocol) signal. Your STB (Set Tip Box) requires both a video and IP signal. The IP signal is necessary for all of the aforementioned interactivity. The fiber cable terminates at the Optical Network Terminal or ONT for short. The ONT converts the optics into a digital signal that can be utilized by ones equipment. From the ONT your video, phone and internet are provided to the location. This is where things can differ as the internet signal can be provided via a coaxial (MoCA or Multimedia over Coax Alliance) or RJ45 Cat5 (Ethernet) cable. It is important to identify and understand the differences of these two setups. In my case I have my internet entering via Ethernet cable, which in my humble opinion makes things a heck of a lot easier.
How does one tell the difference? In most cases it’s rather simple; just look at the Verizon’s router WAN (Wide Area Network) Port. Does it have a RJ45 (Ethernet) or Coax (TV cable Cord) going to it? If the router’s WAN port doesn’t have a coaxial connector then one will need to convert the MoCA signal into a usable Ethernet signal that routers understand. The easiest way is to use Verizon’s router as a bridge. In this method the Verizon’s router simply converts the signal and passes it along to your own router. The challenge is to try to maintain the interactivity that FIOS TV provides. Because of this one needs to supply the IP routed signal back to the FIOS router. There are multiple methods for doing this and I would recommend investigates which one make the most sense.
In my particular case the IP signal was provided by Ethernet. Again there are various ways of installing one’s own router. The hardest is to utilize Verizon’s router as a bridge. This setup requires configuring Verizon’s router as a bridge and also creating a VLAN (Virtual Local Area Networks). In addition one needs to set up their own router so it will work with the various routing tables and networks. For me this is too complex for the average person and it can be difficult to trouble shoot if something goes wrong. Please consider that Verizon will not support utilizing third party routers.
The easier method is to request an Ethernet signal (if you don’t already have one) from their ONT. I would highly recommend getting your hands on a NIM or Network Interface Module. This device is used to convert Ethernet to Coaxial so it can be fed back to your STBs. These can be purchased online and Verizon technicians can be a valuable resource with these sorts of acquisition. At the very least they can point you to the right direction. Once you have a NIM the rest is rather simple.
Log into the current Verizon Router.
Located the router’s MAC address and copy it down.
Go to the port forwarding section and copy down the Applied Rules.
Example:
Network Computer/Device: 192.168.1.100:63145
Application & Ports Forward: Application UDP Any -> 6347
Note: There may be up to three entries for each one of your Set Top Boxes.
Look at your current device list, typically found on the home screen. Copy down your STB MAC and IP address.
Example:
IP-STB1
Connection Type: Ethernet
* IP Address: 192.168.1.100
IP Address Allocation: DHCP
*MAC Address:                07:73:fFe:ad:8b:3f
* Things you will need to write down
Go to the network section and look for the main Ethernet connection. Select this and then select more setting, typically found at the bottom. Release the current lease.
Remove the Verizon router
Install your router
Connect the NIM by plugging in an Ethernet from one of the routers LAN (Local Area Network) ports to your NIM. Then connect the coax cable, the same cable that was used by Verizon router.
Set you DHCP routing IP pool to accommodate Verizon’s STB IP’s (note their IP’s start at 192.168.1.100)
Go to DHCP section and reserve the STB IP’s by inserting the IP’s and MAC addresses. This shall ensure that nothing else utilizes the same IPs as the STBs thereby preventing IP address conflict.
Add the port forwards from Step 5 above.
Clone Verizon’s Mac Address utilizing the info from step 2
Finish setting up the router in typical fashion.
Unplug and re-plugin your STB’s and test functionality. It’s best to try using a widget or Movie on demand function.
Note: if the new router can net get an internet signal contact Verizon’s support and have them release the IP and reset the ONT.
EVERYTHING should be working at this point.

3 Go to the port forwarding section and copy down the Applied Rules.
Example:
Network Computer/Device: 192.168.1.100:63145
Application & Ports Forward: Application UDP Any -> 6347
Note: There may be up to three entries for each one of your Set Top Boxes.G
Your display obviously is not like mine as mine does not dosplay the port associated with the ip address
whatever, the STB's start at 192.168.1.100 and icement by 1 for each
the port addr's will be 63145 alo incrementing by 1
there is 1 entry for each in my pf list
however each ip addr also has a port entry starting at 35000 also incrementing by 1 for each ip addr
For some unknow reason these are duplicated e.g I appear to have 11 entries exaactly the same for each stb and as the fios services rules have no action switc there is nowhere to delete the extraneous garbage.
Why do you clone the mac addr??

Want to install AS with Forms / Report service?

Hi
i want to install AS with Forms / Report service?
which version of AS i should download
does forms/ reports service come separately? or with AS
Thanks for help

Hi Paul,
According to your reply, i installed standalone versions of Forms & Reports (10.1.2.0.2)services on Linux suse 9. And it is working fine.
Now my next requirement is that i want to create three environment on my Linux box dev, test and UAT. this one which i have created before i am using that environment as dev.
Kindly provide me some direction that how can i create test and UAT environment on same machine which should point to different source files and databses.
1. Do i need to install again standalone forms/reports services twice? if yes then how can i access them?
2. Is there any setting in existing OAS configuration which can divert me to different sources and databases. i saw something like this somewhere
http://oas.com:7777/forms90/f90servlet?config=UAT&userid=cg_am2/training@tardist
bla bla bla.
Please help.
JM

How to use self-signed Certificate or No-Check-Certificate in Browser ?

Folks,
Hello. I am running Oracle Database 11gR1 with Operaing System Oracle Linux 5. But Enterprise Manager Console cannot display in Browser. I do it in this way:
[user@localhost bin]$ ./emctl start dbconsole
The command returns the output:
https://localhost.localdomain:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control ... ...
I open the link https://localhost.localdomain:1158/em/console/aboutApplication in browser, this message comes up:
The connection to localhost.localdomain: 1158 cannot be established.
[user@localhost bin]$ ./emctl status dbconsole
The command returns this message: not running.
[user@localhost bin]$ wget https://localhost.localdomain:1158/em
The command returns the output:
10:48:08 https://localhost.localdomain:1158/em
Resolving localhost.localdomain... 127.0.0.1
Connecting to localhost.localdomain|127.0.0.1|:1158... connected.
ERROR: cannot verify localhost.localdomain's certificate, issued by `/DC=com/C=US/ST=CA/L=EnterpriseManager on localhost.localdomain/O=EnterpriseManager on localhost.localdomain/OU=EnterpriseManager on localhost.localdomain/CN=localhost.localdomain/[email protected]':
Self-signed certificate encountered.
To connect to localhost.localdomain insecurely, use `--no-check-certificate'.
Unable to establish SSL connection.
A long time ago when I installed Database Server Oracle 11gR1 into my computer, https://localhost.localdomain:1158/em in Browser comes up this message:
Website certified by an Unknown Authority. Examine Certificate...
I select Accept this certificate permanently. Then https://localhost.localdomain:1158/em/console/logon/logon in Browser displays successfully.
But after shut down Operating System Oracle Linux 5 and reopen the OS, https://localhost.localdomain:1158/em/console/logon/logon in Browser returns a blank screen with nothing, and no more message comes up to accept Certificate.
My browser Mozilla Firefox, dbconsole, and Database Server 11gR1 are in the same physical machine.I have checked Mozilla Firefox in the following way:
Edit Menu > Preferences > Advanced > Security > View Certificates > Certificate Manager > Web Sites and Authorities
In web sites tab, there is only one Certificate Name: Enterprise Manager on localhost.localdomain
In Authorities tab, there are a few names as indicated in the above output of wget.
My question is: How to use self-signed certificate and no-check-certificate in Mozilla Firefox for EM console to display ?
Thanks.

Neither problem nor solution do involve Oracle DB
root cause of problem & fix is 100% external, detached, & isolated from Oracle DB.
This thread is OFF TOPIC for this forum.

How to use Two main windows with in a page in script ?

Hi any body explain me...
How to use Two main windows with in a page in script ?
with header data in one main window,
& Item data in other main window.

HI..,
u need to go for SPLITTING THE MAIN WINDOW !!!
Main windows in page windows allow you to format text in multiple columns. Define an area in the page window, in which to position the main windows.
Here is the procedure !!
-->Create a page window and assign it to a page.
Choose Edit --> Main windows.
A dialog box appears.
-->Enter values in the fields Area width and Area height in accordance with the input guidelines for main windows.
-->Enter values in the fields Spacing and Number in the Horizontal group if you want to use multiple columns. You can ignore the fields in the Vertical group.
Determine how many columns and line areas are required for label printing. Then enter the corresponding values in the fields in the Horizontal and Vertical groups.
-->The value in the field Left margin varies from main window to main window if multiple columns are used. The following applies:

Left margin of current column + Window width + Horizontal spacing = Left margin of next column
In label printing, the field Upper margin also varies from main window to main window:

Upper margin of current main window + Window height + Vertical spacing = Upper margin of next main window
-->Enter a value in the field Start position.
This is a counter. Enter a starting value which is equal to or greater than 1.
-->The main windows are added to the list.
-->Save your form.
reward if it helps u...
sai ramesh

How to use JavaMail 1.4 with Oracle Application Server 10g (9.0.4.0.0)

Hi all,
I'd like to know if it's possible and how to use JavaMail 1.4 with Oracle Application Server 10g (9.0.4.0.0), Windows version.
With the following code, I can see that the mail.jar used by the server is the one included in the jdk installation :
// I'm testing InternetAddress.class because I want to use commons-email-1.2.jar that requires mail.jar 1.4 (or higher) and activation.jar 1.1 (or higher)
// and I know that inside the commons-email-1.2.jar file, I need to call the InternetAddress.validate() method that throws a java.lang.NoSuchMethodError: javax.mail.internet.InternetAddress.validate()V if it is used with mail.jar 1.2.
Class cls = javax.mail.internet.InternetAddress.class;
java.security.ProtectionDomain pDomain = cls.getProtectionDomain();
java.security.CodeSource cSource = pDomain.getCodeSource();
java.net.URL location = cSource.getLocation();
System.out.println(location.toString());
This code returns : file:/C:/oracle/app/jdk/jre/lib/ext/mail.jar and this mail.jar file has an implementation version number: 1.2
- I've tried to include my own mail.jar (1.4.2) and activation.jar (1.1.1) files in the war file that I deploy, but it doesn't work (the server still uses the same mail.jar 1.2)
- I've tried to put the mail.jar (1.4.2) and activation.jar (1.1.1) files in the applib directory of my OC4J instance, but it doesn't work (the server still uses the same mail.jar 1.2)
- I know that a patch exists : I've read the following document: How to Make Libraries such as mail.jar and activation.jar Swappable ? [ID 552432.1]
This article talks about the Patch 6514136, but this patch only applies to : Oracle Containers for J2EE - Version: 10.1.3.3.0
Can you please help me ?
Thanks in advance for your answers,
Laurent

I strongly suggest to upgrade to AS 10.1.3 to get this.
Think of future support of AS 9.0.4. You will get not critical patch updates anymore.
--olaf

How to use a Web Template with queries from multiple BW Systems?

Hi all,
can anybody help me how to use a Web Template with queries (DATA PROVIDER)in it from multiple BW Systems?
Thanks in advance, best regards
Frank

Great! Thanks for the quick response.
Have you tried this for XMLA datasources created within the EP system also?
i.e use Web Analyzer to create a view from the XMLA source and use that view within WAD?
Thanks.

How to use digital av adapter with iphone4

How to use digital av adapter with iphone4

you can connect it to the iphone4's connector and then you can start an app which support av out like apples video app and then it will display on the tv connected
the iphone4 don't support mirror though so only apps which support tv out will work with it

How to use a iPad mini with a projector

How to use a iPad mini with a projector

Use an AirPlay compatible device, such as an AppleTV or an AirPlay compatible AVR.

Does JCE 1.2.2 make use of a certificate with an expiration date?

Does JCE 1.2.2 make use of a certificate with an expiration
date?
If so, what's the date?

The validation code which checked for certificate expiration was only found in JCE 1.2.1. It WAS REMOVED from JCE 1.2.2 and all successive releases like JCE in JDK 1.4.x and 5.x (and soon in 6.x). This expiration problem was the primary reason for releasing JCE 1.2.2 over three years ago. Export control regulations changed following the release of JCE 1.2.1, and Sun released 1.2.2 shortly thereafter so that customers wouldn't have this expiration problem.
This change is documented as the first bullet in the change log for JCE 1.2.2, which is found both in the product distribution itself and on the following JCE product page:
http://java.sun.com/products/jce/jce122_changes.html
That said, JCE 1.2.2 is indeed signed with a certificate which is valid until October 2006, HOWEVER the JCE 1.2.2 and JCE in JDK 1.4.x/5.x code no longer checks that expiration date. All it cares about is that the code signature is valid.
My understanding is that BOTH JDK 1.3.x and JCE 1.2.2 are slated for End-of-Life on March 30th, 2006, and will no longer be supported by Sun. Both should continue to work after that time, but will no longer be supported.
I hope that helps clear the confusion.

How to use Special value set with Column clause to display addtional column

hi
can anyone tell me
How to use Special value set with Column clause to display addtional column
how can i use FND POPID and with COLUMN clause ?

Dear Yaseen,
To get the value in formula cumulative,after you have created the formula for that particular key figure,go to edit and click on tab "calculations".
In that select overall result as 'count all values not equal to zero' and single result as 'count all values not equal to zero' .
And mark the cumulative check box underneath.
I hope you get the desired result and please do me favour .
Sumit goomber

How to use a Geotrust certificate with standalone forms/reports services

Similar Messages

Maybe you are looking for