How to use a non cumulative key figure in a multi planning area

Hi
I'm new to bps, my problem is
I need to read the last stock quantity and value at plant and material level to do further calculations in a fox formula, so i made a planning area for the cube 0rt_c36 and another for my tc cube where the results should go, then i combine these areas in a multiplanning area.
problems arise when selecting the key figure in the ratios tab of the multi area, the ratios 0CPTOTSTOBU (last stock) and 0CPTOTSTOPV (last stock purchase value) are not available, only the inflow and outflow ratios are 0CPTOTREBU and 0CPTOTREPV.
I know when reporting, the actual value for stock is calculated by bex, namely, there is no data store at database level, so the question is:
How to obtain last stock for using in bps??
thank you for any help
regards
A. Garduñ

Hi Azael,
In the How to Papers, you will find a Guide on how to take a Sanpshot view of the Stocks(How To Handle Inventory Management Scenarios in BW). Basically if you implement the Guide, you will have another cube called ICSNAP1, which will contain stock quantities /values at the end of each month. You will therefore have to take stock at the end of the last month from that cube and add up the relevant receipts and issues to arrive at the current Stock or Stock as on a particular date.
Hope this helps!
Regards
Sriram

Similar Messages

How to create a non-cumulative key figure & How to make a info cube as so

Hi Experts,
How to create a non-cumulative key figure & How to make an info cube as non-cumulative cube?
Can any one kindly provide me the steps we need to performe?
Thanks in Advance,
Raj

Hi Azael,
In the How to Papers, you will find a Guide on how to take a Sanpshot view of the Stocks(How To Handle Inventory Management Scenarios in BW). Basically if you implement the Guide, you will have another cube called ICSNAP1, which will contain stock quantities /values at the end of each month. You will therefore have to take stock at the end of the last month from that cube and add up the relevant receipts and issues to arrive at the current Stock or Stock as on a particular date.
Hope this helps!
Regards
Sriram

Planning using the Non-Cumulative Key figures

HI,
In my reporting requirement for IP, I need to get some actual values from the cube 0IC_C03. The key figues which I required are 0VALSTCKVAL and 0TOTALSTCK, but these 2 are non-culative key figures. When I selected these 2 key figures in my aggregation level, it is throwing an error message as "InfoObject 0VALSTCKVAL(Version A) is not compounded and Aggregation level is inconsitent".
I read in some document that, it is not possible to use non-cumulative keyfigures in ALVL.
I searched in SDN and SERVICE also, but some documents are saying that, in new path level (19) it is possible. Now I using the path level 18 only. In this case how we have to use these non-cumulative keyfigues,, please sugguest me...
Thanks in advance...
Regards
Rajesh

Hi
Non-cummulative keyfigures are not supported fro planning and teh error thrown is correct.Please find the help link which gives what are supported and not supported as part of aggregation levels.
http://help.sap.com/saphelp_nw70/helpdata/EN/43/1c3c7031b70701e10000000a422035/content.htm
Regards, Hyma

Using Non cumulative key figure in Real time cube

Hi gurus,
I have used non cumulative key figure in a real time cube and when i tried to enter some data using RSINPUT ,it is giving an error and the data is not getting saved.
Can anyone please tell me how to use the Non cumulative key figure in the Real time cube .
Thanks in advance
Regards,
Ravikanth

Hi Ravi,
Please make sure that when you use a non cumulative key figure iun your real time info cube, then choose a time reference characteristic for that key figure.
Then, this time reference characteristic applies for all the non-cumulative values of the InfoCube and must be the u201Csmallestu201D of the time characteristics present in the InfoCube.
For more detaisl, refer to the [http://help.sap.com/saphelp_nw70/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm]
Thanks & Regards,
Balajee.

Non-Cumulative Key figure with inflow & outflow

I am using some non-cumulative key figure in our inventory cube, however, I could not find the non-cumulative field in E or F table of the cube?
Is there a separate table to hold the reference unit. If so, what is the table name.
Thanks.

Hi,
Go to t-code RSDV and enter the tech.name of your cube that has the non-***. key figure and you will see a validity table. This is only thing I know that will make you look at validity table.
The unit for the Non-*** KF will be the same unit as its inflow and outlow parameters' unit.
Thats my 2 cents on the matter.
Reddy

Non-cumulative key figure in Real Estate implementation

Hi all,
    I am implementing Real Estate Module in BW. We are doing analysis on Condition amount ( BKOND).
    The mapped Info Object on BW side is 0COND_AMT, according to standara info sources given by sap ( for e.g in 0RE_3) and it is defined as a Non-cumulative KF with Non cumulkative Change 0COND_CHG.
Can anybody plese explain me the logic behind this. and also source field and table for this 0COND_CHG in R/3 side.

Hi Ravi,
      Please make sure that when you use a non cumulative key figure iun your real time info cube, then choose a time reference characteristic for that key figure.
Then, this time reference characteristic applies for all the non-cumulative values of the InfoCube and must be the u201Csmallestu201D of the time characteristics present in the InfoCube.
For more detaisl, refer to the [http://help.sap.com/saphelp_nw70/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm]
Thanks & Regards,
Balajee.

How use non cumulative key figure and noncumulative key figure screenshot

how use non cumulative key figure and noncumulative key figure screenshot

Hello,
Please see this docs for Non-Cumulative and Snapshot scenario,
[How to Handle Inventory Management Scenarios in BW (NW2004)|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328]
[Non-Cumulative Values / Stock Handling|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0b8dfe6-fe1c-2a10-e8bd-c7acc921f366]
Thanks
Chandran

How to display Non Cumulative key figure data

Hi,
I want to check if there is any data for a non-cumulative key figure. While i am trying to display the data from cube or Multi provider, it is not showing this field. is there any way to check the data for this field other than using reports.
Regards,
Vishnu

Hi,
Take Eg: Quantity of valuated stock - 0VALSTCKQTY it is combination of
Quantity Received into Valuated Stock- 0RECVALSTCK and
Quantity Issued from Valuated Stock- 0ISSVALSTCK
In report you can see only 0VALSTCKQTY Keyfigure.
And the above Two Keyfigures are filling by Routines using Process Keys.
This is for 0IC_C03 and data you can check in MB5B Tcode in ECC.
Check;
Note 745788 - Non-cumulative mgmnt in BW: Verifying and correcting data
Thanks
Reddy

How to create non cumulative Key Figure.

Friends Let me know steps for creating Non Cumulative Key Figure, can any one tell me where can i get documents for this. points will be rewarded

Hi,
check these help links
http://help.sap.com/saphelp_nw04/helpdata/en/8f/da1640dc88e769e10000000a155106/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/95/1ae03b591a9c7ce10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a6305e07211d2acb80000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a6312e07211d2acb80000e829fbfe/content.htm
It's a big topic so it's not possible to write everything here.
You can search the forums also.
Thanks

Purpose of Non Cumulative key figures

Whatu2019s the purpose of Non Cumulative key figures?

Hi....
There is an explanation of advantages and disadvantages of using non-cumulative key figures in "How to handle inventory management scenarios in BW" white paper:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/how%20to%20handle%20inventory%20management%20scenarios.pdf
Also Check..........
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0b8dfe6-fe1c-2a10-e8bd-c7acc921f366
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a6305e07211d2acb80000e829fbfe/frameset.htm
Re: Non-Cumulative keyfigure example
Hope this helps.....
Regards,
Debjani........
Edited by: Debjani Mukherjee on Oct 27, 2008 3:46 AM

When do you go for non cumulative key figures?

hi all,
Can anyone explain the significance of non cumulative key figures. and when do we go for non cumulative key figures.
Can anyone explain me with an example.
thanxs in advance
hari

Hi,
chk these threads:
non cumulative key figures
Cumulative and Non-cumulative Key Figures
also,
There is also an explanation of advantages and disadvantages of using non-cumulative key figures in "How to handle inventory management scenarios in BW" white paper:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/how%20to%20handle%20inventory%20management%20scenarios.pdf
Assign points if this helps!!
Regards,
Dhanya.

Trouble with Non Cumulative Key Figures

Hi all of you,
I am working on Non Cumlative Key Figures, (NCKF). I have the data like this
Sales rep S100 visited SHOP S1 on 1st Jan and 10th Aug, and transacted worth 100 and 500
SHOP S2 on 1st Mar and 1st July and transacted worth 200 and 300
SHOP S3 on 3rd Sept. and transacted worth 400
Sales rep S200 visited SHOP S1 on 1st Jan and 1st Aug and transacted worth 100 and 300,
visited SHOP S2 on 1st April and transacted worth 200
I created Non Cumulative Key Figure in the following manners:
In modeling in InfoObjects I double clicked on my key figure BILLAMT and selected the Aggregation tab. I selected Counter (all values) for Exception aggregat. By default Agg. Referen. Char was 0calday. I then activated the info object and went to BEx. Here I took other IOs like Salesrep, Shop NUM and Dt. Of trans in rows and Bill amt in columns and executed the report. I am not getting the output how it should come for NON cumulative key figures.
But when I right click the key figure Bill Amount in BEx in change query mode and select properties. I go to the option Calculate result as and selected the option as Count all values. And in another option Calculate Single Value as I selected the option Count all values. I said OK, saved the query and executed it. Now the output is similar to how it comes for a Non Cumulative Key Figure query but I am unable to understand the output.
Now my doubt is where do we set the properties for Non Cumulative Key Figures? Is it in the Administrator Workbench under Modelling under InfoObjects?
OR
Is it in BEx change query mode by right clicking on the key figure and selecting properties?
Please explain.
Thank you
TR.

As for the setting for Non Cumulative key figures...the default setting is done in the Key Figure properties, where u can define the Exception Aggregation. This property is used as such in the query, but if suppose u are getting the normal aggregation in the query , what you could do is "Create The Key Figure as Global Calculated Key Figure in Bex" and go to properties...click on the Button for aggregation ..select the aggregation and define with respt to 0CALDAY ..here.
Hope this helps.

Non Cumulative Key Figure help

Hi All,
I am in need of setting up a non-cumulative key figure in a cube. When I load from my ODS everything is ok, however during a delta process, this field at times gets
summarized when in fact it should be static or in an overwite mode. Can someone provide some advice/comments on how I can set up my key figure field in a basic cube to be static yet be able to be used in a calculation for a query? I do not want to apply any functionality such as aggregation, average etc. In R/3 LIS functionality, you basically set up a characteristic Key Figure, how can this be done in BW ?
Best Regards,
Dennis

Dennis,
Check if you ahve declared the KF properly and also check the query which you use ...
Load data and then compare with the query at the lowest level of data in the ODS. Then you will know if the update rules are correct.
Arun

Validity table for a Non-Cumulative key figure

Hi,
I need to make changes to a validity table for a Non-Cumulative key figure.
I know initially it is done thru Extras- > Maintain Non-Cumulative value but subsequently how to change the parameters ?
Best Regards,
-Anurag Dev

If you decide later that you require more validity-determining characteristics, you can modify the selection using the report RSDG_CUBE_VALT_MODIFY. In this report, the non-cumulative InfoCube is only changed to the extent that the new validity-determining characteristics are selected and the validity table is reconstructed. The structure of the non-cumulative InfoCube remains the same. You do not have to reload the transaction data for it.

Exception aggregation on Non-cumulative key figure

Dear experts,
I have a problem. We have an InfoCube in BW in which the Activity Journals are loaded every day. In this Activity Journals it is registered that a Material was listed (available) at a customer (value 0 or 1).
We have a non-cumulative key figure MXW_LISTN with inflow (MXW_LISTI) and outflow (MXW_LISTO). In time this key figure receives +1 or -1 for a customer, material combination.
I want to use MXW_LISTN in the query in a specific way. The key figure on itselve tells me how many listings there are. However, I want to know how many business partners there are with a listing.
I was thinking about an exception aggregation on MXW_LISTN with reference characteristic 0BPARTNER and "Count <> 0". BW however refuses to do so and only lets me do simple aggregations such as AVG, MIN, MAX etc.
Can you think with me and come with an proper solution to count the number of business partners with a listing?
Your help is very much appreciated and rewarded!
Best regards, Hans de Klein

Maybe a solution with virtual key figures is an option?
Please help me out!
Best regards, Hans de Klein

How to use a non cumulative key figure in a multi planning area

Similar Messages

Maybe you are looking for