How to use a object for both key figure and as a charcteristc

Dear all,
we have a requirement where in we have to use Version Field as a key figure and as well as a charecteristc.
Regards
venu

Dear Mayank Gupta
Thxs for ur reply
We are creating a EBIDTA Report which is already developed in R/3 and these result will be stored in Z table.
we have created a DSO which will store this Z table data.
Now the req is we have a created a field called ZVersion which is there in the Key fields of DSO. ok
But in report we want to use the condition TOP1 on the version. as the version is a not a key figure we cant create the Conditon on the characteristc.
If we use version as a key figure then the records are summurised in DSO as u have to insert it in Data Field.
we want to use version as a primary key.
so how to go abt it?
regards.
venu

Similar Messages

Can I use one account for both my labtop and my ho...

can I use one account for both my labtop and my home computer?
Solved!
Go to Solution.

Softthunder wrote:
can I use one account for both my labtop and my home computer?
Hello,
Yes you can. You can access your account using any Skype enabled computer/device in any country worldwide.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Can I share my iCloud storage with my wife? I'm interested in using the storage for both phones, hers and mine.

Can I share my iCloud storage with my wife? I'm interested in using the storage for both phones, hers and mine.

You will not want to do that and you should just have two 5GB free accounts.
Too much risk of merging or losing data.

PC & Mac Sharing 1 Monitor and KB Setup - How to use KB/Mouse for both?

I am purchasing a Mac Mini to replace my personal computer. I have one monitor/KB/mouse setup shared between my work and personal PC, switched back and forth via a USB KVM switch (http://www.iogear.com/product/GCS632U/)
I want to go with the Apple bluetooth mouse and keyboard with the purchase of my mac mini, but how can I make it so it will work with both my work PC (Windows XP Dell laptop docked) and my new mac mini?
Should I purchase a USB bluetooth dongle and connect that to the mini KVM switch? Or should I just plug the USB dongle into my docked laptop and pair with both the mini and the PC (if pairing to both is even possible)?
Thanks in advance.

If both are on your intranet, try Synergy.
I personally use the Wormhole. You can drag between desktops.

How to use form design for both online and Offline Scenrio!

Hi All,
I have created the forms using WebDynpro context with ZCI layout for Online scenario.
There are some fields which need to be prefilled and are read only.. Header fields.
There is no interface structures created seperately but the interface is constructed through webdynpro context.
Now that I have to use the same for offline scenario, I don't see layout in SFP of form. I can create a structure for Importing fields but there is no Layout for mapping?
Do I need create seperate forms for this as I have some prefilled hedaer fields which I can't pass using download beacause there is no context design available for this?
Regards,
Srinivas

you could either create a separate form for your offline form using Data Dictionary interface or use the Data Dictionary interface for both of your forms.
You do have the option of creating your own XML file for your offline form - you may be able to copy the XML code out of your online interface, save it to a file and use that for your offline interface - i'm not 100% sure on this as I've never done that.

Using project libraries for both web-based and AIR applications

I need to develop substantial code to build both web-based and AIR applications. Yes, they will have different features, especially when it comes to accessing files on the local file system.
However, 98% of the code can be shared.
I want to use a project library that can be used for both types of applications. Maybe using conditional compile when required to not use AIR API's in a web-based application.
I found this (somewhat old) warning:
Include Adobe AIR libraries Select this option if your library must use AIR features, such as access to the AIR APIs. Flex Builder then changes the library path of this new Flex Library project so that it includes airglobal.swc and airframework.swc. Web-based Flex projects cannot use this library.
Do not select this option if you are writing a generic library intended to be used only in a web-based Flex application, or in either a web-based or AIR-based application.
Does this apply to Flash Builder 4.5?

I have found a workaround, but it's quite clumsy, involving a transfer vector (in old-fashioned terms) in the main application for each function in the AIR library.
I have created a library for AIR classes only (fourdtext.fileOperations is there).
The AIR application provides "Function" values that any other code in the general-purpose libraries can use.
It works, but it's nasty.
In Main.mxml:
import com.fourdtext.fileOperations.AxFiles;
// this gets a list of native path strings, from and array of "File" objects
public var AxGetListFunction:Function = AxGetListRedirect;
private function AxGetListRedirect(list:Array):Vector.<String>{
return AxFiles.AxGetList(list);
In general-purpose code:
var list:Array = event.dragSource.dataForFormat("air:file list") as Array;
var AxGetList:Function = FlexGlobals.topLevelApplication.AxGetListFunction;
listFiles = AxGetList(list);

Use external drive for both Time Machine and storage for Back to My Mac

Hi all,
I have been "a Mac" now for over a year and just keep finding cool new things that make me happy I switched. The latest thing is Back to My Mac offered with my Mobile Me account. With a rather convoluted mix of PC/Mac/iOS devices to manage - best $99 I ever spent btw...
I also have a 1TB Time Capsule that I have been using with Time Machine to back up all four of my Mac computers at home. Needless to say, the 1TB is really struggling to handle the amount of data being backed up and certainly leaves no room for anything else.
What I wanted to do was to attach a larger external hard drive via a powered hub to the USB port on the Time Capsule and use it for Time Machine backups while using the internal 1TB drive with Back to My Mac so that I can have remote access to all my data from anywhere without having to leave my computer running at home all the time in order for my laptop to "see" it when I'm away. And, yes, the amount of that data far exceeds what any level of Mobile Me subscription can offer! I should also mention that the hard drive is the only USB device connected through the hub to the Time Capsule at the moment. There are no other devices that might be "getting in the way".
I'm thinking maybe all this is asking too much without the addition of a dedicated file server (Mac Mini, perhaps - not a purchase my budget wants to make).
I understand that the Time Capsule doesn't support partitions, so I bought a Western Digital 2TB Elements drive, connected it to my Macbook Pro and used Disk Utility to reformat the drive from the incompatible NTFS it shipped in to a single, Mac OS Extended (Journaled) partition. I then made two folders on the drive, one for Time Machine backups and one for Back to My Mac remote storage/access. Great.
However, when I connected the 2TB drive to my Time Capsule I could not see it at all. Time Capsule was reporting problems in the way of a disk error. From within my Airport Utility, I could see the trouble was the external drive. The utility suggested connecting the drive to a Mac and using it's Disk Utility to troubleshoot.
I followed through, checking the disk, etc. and ended up reformatted the drive on my Macbook Pro yet again with the same specifications as before but without the folders and reconnected it to the Time Capsule. Same deal. But now, I can't even remotely connect to the Time Capsule at all. I can see the Time Capsule in the shared area of my Macbook's Finder but can not connect. The connection tries and fails even before it gets to asking me for username and password credentials.
Long story short, first of all, I suppose I would like to know if I'm asking for the impossible?
Second, if what I want to do *is* possible, what steps do I need to take to make it so?
Thanks in advance for any advice or suggestions you might have.

Well, I have now reformatted/partitioned my poor WD Elements 2TB drive about a dozen times as well as restarted my 1TB Time Capsule so many times it's no wonder it's as confused as I am! <G>
Last night, at your suggestion, William, and in respect for your continued support, I tried creating two 1TB Mac OS Extended (Journaled) partitions on the WD external USB drive, both with GUID partition tables. Both volumes mounted to my laptop's desktop flawlessly and without issue.
Once the external drive was connected to the Time Capsule, however, it was a crap shoot as to whether or not the drive was recognized at all, reporting a problem with the disk, or, even at one point, mounting one of the two volumes but not both. <sigh>
I read somewhere on the Internet that you need to restart the Time Capsule for volumes on an external USB drive to be recognized.
So I tried that. I connected the freshly partitioned/formatted disk to the Time Capsule and restarted it. This succeed in removing the issue of reporting a nameless drive with a capacity of 0MB. It then reported the drive with its correct name but would not recognize whatever volumes in whatever partitions that particular crack at it contained with the exception of the once, as I mentioned above, when only one of two volumes mounted correctly and was listed with the right name and capacity on the Time Capusule's Setup's Disk tab.
At this point I have given up on my goal to use the external drive with Time Machine to back up my Macs or to hope I will ever be able to see its contents remotely via Back to My Mac. All I would like to do now is simply find a reason why I can't get it successfully connected and playing nice with my Time Capsule in the first place!
Any further suggestions or advice as to what steps I might take next would be greatly appreciated.
Thank you all.

Can I use Magic Jack for BOTH phone calls and Fax. Is Magic jack PLUS BETTER.

I am using the Magic Jack for regular phone calls. Now, I want to use it for Faxing in and out - on Windows - on a wireless connection to my Officejet 8600 Pro Plus. I see a lot of problems in the forum. Is it easier to buy and use the new Magi Jack PRO. AND. PLEASE, Does anyone have instructions for the installation and use?

I'm going to be up front and straight forward with you. Magic Jack, does not work with faxing 90% of the time. It's not designed to. That being said, you still have to have a phone line plugged into the printer to fax. There is no such thing as wireless faxing. There is internet faxing, through companies such as eFax, and you can use eFax wirelessly form the front panel of select printers. The 8600 is not one of those printers though. The printers that include the eFax app are in the PhotoSmart line. Now that you know all of that, you can try to get faxing to work with magic jack, but it' most likely not going to work. Here is a list of the things you can try:
Fist make sure you have a DSL/Digital filter installed in the line. Next, set the fax speed to slow. You can find steps in this document that will help with that. Last make sure the ECM (Error Correction Mode) is off. To turn off the ECM:
From the home screen, touch the right arrow.
Touch setup.
Touch fax setup.
Touch advanced fax setup.
Scroll down to ECM.
Touch ECM.
Touch off.
Touch the home button.
That's about all you can do to get it to work, and even then it's not guaranteed at all. Like I said, Magic Jack does not work with faxing.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

How to block a block for both account payables and account receivables?

hello friends
we have a requirement where we need to block a bank for both a/c payable and a/c receivables?
can any one provide me the procedure for the same?
good answers will be appreciated
thanks in advance..
with regards
S.Janagar

Hi
If you block the bank GL it will be held closed for updation ie no entries will be allowed for posting in this ledger the block types are as follows
Block In Chart Of Accounts
a.Blocked for creation
b.Blocked for Posting
c.Blocked for Planning
Block in Company Code
a. Blocked for Posting
You can perform any type of block in Chat of accounts & in Company Code
The Steps
FS00 - select Bank Account Group - select the GL to be blocked - click on the icon Block or do right click you will find the option block - you will find the list as detailed above - tick the checkbox and save
Hope it will be use full

How to use different parameters for two tables(chart and Table) in one report in SSRS?

Hi,
Here is my requirement, i have 7 parameters in my report(Site,Account,LOB,year,Month,WeekDay and Date_Filter),
and in my report i have one table and one Chart,
my requirement is the table in the report has to show the data for 6 parameters only i.e(Site,Account,LOB,year,Month and WeekDay).so the table has to consider only 6 parameters, and it has ignore the 7th parameter, table should not consider Date_Filter parameter.
And Chart has to consider all 7 parameters.
so, when we preview the report table has to show the data for only 6 parameters and chart has to show the data for all 7 parameters.
if there is a way to get this Please reply me ASAP, it is an urgent requirement.
Thanks in Advance,
Naveen

Hi Naveen,
Refer below link to create multiple datasets as suggested by Gnanadurai
http://technet.microsoft.com/en-us/library/ff714047(v=sql.105).aspx
Thanks
Swapna

How to use one wallet for both infrastructure & midtier installations?

I have a 10.1.2.0.2 Portal installation that also includes the metadata repository & other infrastructure components on the same server. I need to configure SSL throughout Portal and I have 1 server certificate that I installed in Oracle Wallet Manager in the infrastructure home. Can I use this same certificate for the midtier without installing it in the midtier Wallet Manager?
Thanks,
Denise

From one Directory Server (ds1) generate CSR with the name ds.example.com in the request. Once you get the signed cert import it into the same server you generated CSR with. Then from ds1.example.com :
scp -p <slapd install/instance path>/alias/* <account>@ds2.example.com:<slapd install/instance path>/alias/
to copy the contents of the alias path to the same location on the other Directory Server. Make sure file permissions are the same.

How to Use a Certificate for Two Way SSL and another certificate for WS Security Header at Client Console Application(C# Dotnet)

Hi,
I want to consume a Java Web service from Dotnet based client Application. The service require one Certificate("abc.PFX") for Two Way SSL purpose and another certificate("xyz.pfx") for WS security purpose to be passed from client Application(Dotnet
Console based). I tried configuring the App.config of Client application to pass both the certs but getting Error says:
Could not establish secure channel for SSL/TLS with authority "******aaaa.com"
Please suggest how to pass both the certs from client Application..

Hi,
This problem can be due to an Untrusted certificate. So you need just full permissions to certificates.
And for more information, you could refer to:
http://contractnamespace.blogspot.jp/2014/12/could-not-create-secure-channel-fix.html
Regards

Add update rule for new key figure in one info struc

Hi, everyone
I would like to know how to add update rule for new key figure in one info struc.
Thanks ahead.
Eric

1)I have created the update rule for one info structure
2)add one key figure in the info structure due to business requirement
3)then I use MC25 to add update rule for the new key figure, but I find that there no relevant menu to do such operation.
Can anybody tell me how to do with it?
Any answer will be appriciated.

Use of Aggregation tab of key figure

Hello Gurus ,
Please tell me use of Aggregation tab of key figure , and where it affects ?

hi,
check the below links for aggregation and with examples..
http://help.sap.com/saphelp_nw04s/helpdata/en/47/607899dcce6834e10000000a421937/frameset.htm
To enable the calculation of key figures, the data from the InfoProvider has to be aggregated to the detail level of the query and formulas may also need to be calculated. The system has to aggregate using multiple characteristics. In regard to a selected characteristic, the system can aggregate with another rule for each key figure (exception aggregation).
During aggregation, the OLAP Engine in BI proceeds as follows:
1. First, standard aggregation is executed. Possible aggregation types include summation (SUM), minimum (MIN) and maximum (MAX). Minimum and maximum can, for example, be used for date key figures.
2. Aggregation using a selected characteristic occurs after standard aggregation (exception aggregation). The available exception aggregation types include average, counter, first value, last value, minimum, maximum, no aggregation, standard deviation, summation, and variance. Application cases for exception aggregation include warehouse stock, for example, that cannot be totaled over time, or counters that count the number of characteristic values for a certain characteristic
assign points if helpful
regards
vadlamudi

Cumulative key figure and non cumulative key figure

Hi BW Expertz
Could any one give me the clarification about cumulative and non cumulative key figures .Why we go for cumulative key figure and non cumulative key figure.If any docs could u just mail to the following [email protected]
Thanx In advance
Best regards
sankar prasad

Cumulative values are those key figures (KF) that are cumulated using all characteristics, thus also using time.
Ex: Sales revenue, Quantity....
Non-cumulative values are those key figures that are measured in relation to a period in time; they cannot be meaningfully cumulated over time. Non-cumulative values are summarized over time using so called exception aggregation.
Ex: Number of employees, Inventory, Stock prices, Account balance,.....
AGGREGATION TAB
Non cumulatives are evaluated by non-cummulative values. Non-cummulative values are special key figures that are different from other key figures (cummulative values) in data transfers and saving as well as in aggregational behaviour. These are measured in relation to a period in time; that is to say, they cannot be meaningfully cumulated over time. Non-cumulative value are summaraized over-time using exception aggregation.
Non-cumulative values such as 'number of employess' are cumulated using characteristics such as 'cost center'. It does not make any sense, however, to cumulate the number of employees using different periods. The result at the end of any particular period would be the sum total of number of employees for each posting during the period. This would of course be wrong.
Instead, the aggregation of the KF can be defined as exception aggregation wherein an additional references characteristics is utilized to tell BW which value to use during the period, in this case, 0CALMONTH is used, in the above example, to indicate that only the last value of 0HEADCOUNT, updated by costcenter, is to be taken for any calender year and month.
Cummulative vs Non-Cumulatives
The purpose of non-cumulatives is to optimize the data transfer in BW, the data retention and the database access. The data transfer from OLTP to BW is minimized and only the meaningful data is saved and processed.
It is recommended that you use non-cumulative values for areas that dont change frequently such as warehouse stock or number of employees.
Non-cumulatives are modeled in BW using a non-cumulative value with the fields belonging to it for storing the non-cumulative or for inflows or outflows.
Non-cumulative values are stored with special KF that differ in terms of data transfers and aggregational behaviour.
Features of NON-Cumulative Values Transfering and Saving Data:
- NC values are mapped uisng one KF for NC changes or two KF for inflows and outflows.
-NC are transferred in an initialization run and the change runs that follow (initialization can also be omitted here)
- A non-cumulative value always has a time-related exception aggegation.
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/82/f2dc37f0f12313e10000009b38f8cf/content.htm
http://help.sap.com/saphelp_bw31/helpdata/en/82/f2dc37f0f12313e10000009b38f8cf/content.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/d2/e0173f5ff48443e10000000a114084/content.htm
with Example
Re: Non-Cumulative keyfigure example
Re: Types of non-cumulative keyfigures
/community [original link is broken]
/community [original link is broken]?forumID=131&threadID=29557&messageID=273049
/community [original link is broken]?forumID=131&threadID=111914&messageID=1248243
****Assign Points If Useful*********

How to use a object for both key figure and as a charcteristc

Similar Messages

Maybe you are looking for