How to use a REAL Bluetooth Dongle in WTK?

Hello,
Is there a guide or tutorial that shows how to set up the WTK for MIDP (or even CDC) to use a REAL bluetooth dongle on a PC, rather that use the simulated bluetooth enviroment that is shipped with WTK?
Which bluetooth package is best to use?
http://www.avetana-gmbh.de/avetana-gmbh/produkte/jsr82.eng.xml
http://sourceforge.net/projects/bluecove/
https://bluesock.dev.java.net/
Any others?
Thanks.

Anyone already do that? Or is impossible to use WTK emulator ans USB BT dongle?

Similar Messages

Please tell me how to use the Simple bluetooth client server example.

Hi i used the simple bluetooth client server example in labview 7.1. Iam getting an error saying your system does not support the network operation. I have following doubts also.
1. Should i pair the device before running the labview.
2. Should i enable the file transfer wizard in the software given with the bluetooth adapter.
Please help
Thank you
R.Prem kumar
09940446193

Hi R.Prem,
Could you please let me know what error code is associated with this error message? Also could you please provide a description of the setup you are currently using? Thanks!
Best regards,
Steven

How to use airplay with wifi dongle?

My mac's wifi adapter was broken, so I bought a wifi dongle - ASUS USB-N10.
It wasn't work until I installed the driver: http://www.wireless-driver.com/realtek-rtl8192su-adapter-macos-drivers-ver1082/
And however it seems to be a wifi assistant to help me using my wifi dongle more than a simple driver, and my mac recognize the wifi dongle as a lan connection, so I just cannot use airplay anymore!
The question is: how can I make my mac recognize the wifi dongle correctly (as a wifi)?

AirPlay is only compatible with AirPort base stations.
The dongle is not compatible with AirPlay.

How to use "Oracle Real Application Testing"

I am analyzing if/how my employer can make best use of "Oracle Real Application Testing". I therefore read various documentation and articles as well as the relevant sections in the "Oracle® Database PL/SQL Packages and Types Reference". However, there is one conceptual question which I could not yet answer from this documentation.
From what I understood there are (at least) two possible approaches to capture and replay SQL workload:
1) Capture the workload into a STS (SQL Tuning Set) using DBMS_SQLTUNE. Replay the workload before/after changes made to the system using DBMS_SQLPA. DBMS_SQLPA can be further used to compare the before/after execution and to generate comparison reports thereof.
2) Capture the workload into OS files (and optionally into a SQL Tuning Set in addition to that) using DBMS_WORKLOAD_CAPTURE. Replay the workload using DBMS_WORKLOAD_REPLAY. DBMS_WORKLOAD_REPLAY can be further used to compare different replay runs and generate reports thereof.
Now my questions are:
{noformat}(i){noformat} Is the overview I sketched above correct or did I misunderstand/miss important points?
(ii) What is the conceptual difference between the two approaches depicted in (1) and (2) above / what is the intended use for each of them?
(iii) What is the difference between the information that DBMS_WORKLOAD_CAPTURE writes in the corresponding OS files and the information that is stored in a STS? From what I understand, both store information related to SQL execution during a certain period, including the impact of each SQL on the entire workload. Are the two just different formats to store the data (within and outside of the database) or is there any different information stored in them?

Here you have books related to that theme:
http://otn.oracle.com/pls/db92/db92.docindex?remark=homepage
Joel Pérez

How to use reliance net connect dongle in os 19.9.2 ??

how to connect reliance netconnect+ in mac os 10.9.2...??

Hope you find an answer in this thread.
https://discussions.apple.com/thread/5477063?start=0&tstart=0
Best.

How to use the wah pedal in L9?

Hi there,
In the new pedal board in L9 there is a couple of wah pedals. Does any one know how to use them 'real time'? May be with an expression pedal, so I won't have to automate the whole thing?
Basicly I wan't to be able to play my guitar with wah when I record.
Any suggestions?
Best regards
Palle

You could try one of these mate: http://www.studiospares.com/Keyboard-Accessories/M-Audio-Ex-P-Expression-Control ler/invt/363740

Inbuilt bluetooth + Bluetooth dongle on macbook pro

Hi,
Is it possible to use an external bluetooth dongle + inbuilt bluetooth on macbook together.
Idea is to connect bluetooth mouse and speaker to inbuilt bluetooth and keyboard to external dongle... Experiencing crappy connection when all is connected to my macbook at once especially the keyboard.
I'm running mavericks. Heard that bluetooth dongles don't work on it anymore...??? Is it true???

I have certainly never tried what you depict. IMHO, that would not work.
Barry

JABRA A320S bluetooth dongle compatible with my mac book??

I bought a jabra a320s to pair my mac book with a sony mini stereo. i want to play my music through it.
i had to get the jabra dongle since the mac's bluetooth didn't support a2dp. i haven't opened the box yet for the jabra device. will this work with a mac? on the box it only says compatible with various windows, etc.
anyone know if this will be fine for what i need? thanks in advance.
Message was edited by: illinny

The Mac Book is from 2005..When I tried looking up the Bluetooth specifications it didn't list A2DP as a feature.
It doesn't list A2DP as a feature on the very latest MacBooks either - even though those are the ones that come with Leopard which does have A2DP support. A2DP is a feature of the Macs Bluetooth system software, not the Bluetooth hardware. That's why older Macs updated to Leopard have gained A2DP support, with no new Bluetooth hardware required.
So if the bluetooth on this computer doesn't have A2DP then there's no way for me to use a bluetooth dongle instead?
No. But it wouldn't matter if you could use the Bluetooth dongle. You would still need the updated Bluetooth software on the computer for A2DP support - which is part of Mac OS X 10.5 Leopard.
I find that hard to swallow.
Well, try it for yourself if you don't believe me.
I should just be able to disable the internal bluetooth and use the dongle, right?
Well... Yes, if there was actually a way to disable just the internal Bluetooth - but there isn't. If you were to turn Bluetooth off in the system preferences, it would turn all Bluetooth off, including the dongle.
But lastly, does anyone know if the Jabra dongle would be compatible with the Mac Book if I actually busted open the box?
You're not reading what I've written are you? As the MacBook *already has* internal bluetooth hardware, you cannot use an external bluetooth dongle with it. The internal bluetooth always takes priority over the external, and you cannot turn off just the internal Bluetooth.

How to use a bluetooth dongle instead of built-in BT?

Just got an "Ultra Long Range Industrial" bluetooth dongle (BTD Bluetooth Dongle BT-6610). I want to use it instead of the built-in bluetooth because it has a much longer range.
How do I disable the built in bluetooth and enable the BT-6610?
The dongle shows up:
USB Bus:
Host Controller Location:          Built-in USB
Host Controller Driver:          AppleUSBOHCI
PCI Device ID:          0x0aa7
PCI Revision ID:          0x00b1
PCI Vendor ID:          0x10de
Bus Number:          0x06
Bolutek BTD-6610:
Product ID:          0x0001
Vendor ID:          0x0a12 (Cambridge Silicon Radio Ltd.)
Version:          59.41
Speed:          Up to 12 Mb/sec
Manufacturer:          Bolutek Technology Co.,Ltd.
Location ID:          0x06200000
Current Available (mA):          500
Current Required (mA):          200
BRCM2046 Hub:
Product ID:          0x4500
Vendor ID:          0x0a5c (Broadcom Corp.)
Version:           1.00
Speed:          Up to 12 Mb/sec
Manufacturer:          Apple Inc.
Location ID:          0x06100000
Current Available (mA):          500
Current Required (mA):          0
Bluetooth USB Host Controller:
Product ID:          0x8217
Vendor ID:          0x05ac (Apple Inc.)
Version:           1.80
Serial Number:          xxxxxxxxx
Speed:          Up to 12 Mb/sec
Manufacturer:          Apple Inc.
Location ID:          0x06110000
Current Available (mA):          500
Current Required (mA):          0
Here are my bluetooth setting:
Apple Bluetooth Software Version:          2.4.0f1
Hardware Settings:
Address:          xx-xx-xx-xx-xx-xx
Manufacturer:          Cambridge Silicon Radio
Name:          billbarnes
Firmware Version:          5941
Bluetooth Power:          On
Discoverable:          No
Vendor ID:          0
Product ID:          0x1
HCI Version:          4 (0x4)
HCI Revision:          5941 (0x1735)
LMP Version:          4 (0x4)
LMP Subversion:          5941 (0x1735)
Device Type (Major):          Computer
Device Type (Complete):          Macintosh Portable
Composite Class Of Device:          3670284 (0x38010c)
Device Class (Major):          1 (0x1)
Device Class (Minor):          3 (0x3)
Service Class:          448 (0x1c0)
Requires Authentication:          No
Services:
Bluetooth File Transfer:
Folder other devices can browse:          ~/Public
Requires Authentication:          Yes
State:          Enabled
Bluetooth File Exchange:
Folder for accepted items:          ~/Downloads
Requires Authentication:          Yes
When other items are accepted:          Ask
When PIM items are accepted:          Ask
When receiving items:          Prompt for each file
State:          Enabled
Devices (Paired, Favorites, etc)
Manufacturer:          Cambridge Silicon Radio (0x3, 0x10db)
Incoming Serial Ports:
Serial Port 1:
Name:          Bluetooth-PDA-Sync
RFCOMM Channel:          3
Requires Authentication:          No
Outgoing Serial Ports:
Serial Port 1:
Address:
Name:          Bluetooth-Modem
RFCOMM Channel:          0
Requires Authentication:          No

Hi X42:
Your last paragraph intrigued me as I had the same impression:
I thought unlicensed BT devices were legally limited by the FCC to about 30 feet (3 meters)
Actually, 30 feet is 10 meters.
Anyway, I researched and found this as part of a Wikipedia item:
Bluetooth is a standard wire-replacement communications protocol primarily designed for low power consumption, with a short range (power-class-dependent, but effective ranges vary in practice; see table below) based on low-cost transceiver microchips in each device.[7] Because the devices use a radio (broadcast) communications system, they do not have to be in visual line of sight of each other, however a quasi optical wireless path must be viable.[2]
Class
Maximum Permitted Power
Range
(approximate)
mW
dBm
Class 1
100
20
~100 meters
Class 2
2.5
4
~10 meters
Class 3
1
0
~5 meter
The effective range varies due to propagation conditions, material coverage, production sample variations, antenna configurations and battery conditions. In most cases the effective range of class 2 devices is extended if they connect to a class 1 transceiver, compared to a pure class 2 network. This is accomplished by the higher sensitivity and transmission power of Class 1 devices.[8]
Apparently there are BT devices that will transmit about 300 feet. I did look at the FCC site, but quickly became confused in the technbabble.
Barry

How can I tell whether my Mac Pro is using the bluetooth dongle or not?

I got myself a bluetooth dongle to get around the terrible internal BT signal. When it's in use, it alleviates all my troubles and I can actually stroll halfway down the hall and still type accurately.
However, it seems that every time I reboot, it must stop using the dongle and use the internal, because I then get the terrible signal of the internal antenna. The only way to convince my computer to use the dongle, is to unplug and plug it back in. Then I have to delete all my bluetooth devices and pair them again!
So yes, I am seeking a two-part solution.
Firstly, I'd like to know if there's anywhere in System Profiler, BT Preferences, Terminal, etc that will just inform me of WHICH bluetooth my computer is using.
Secondly, I'd ideally want to set it to default to the dongle. If this isn't possible, at least the first part would let me know when I need to arduously re-do my settings.
Thank you very, very much. Usually this isn't that big an issue, as I only rarely need to move my peripherals off my desk, but I got a Magic Mouse earlier this week and its extremely clear it doesn't have as strong an antenna or whatever as the Mighty Mouse, and it starts going erratic if I move it so much as a foot from the Mac Pro tower.

I have the same problem and I cannot find any way to turn off the internal bluetooth without killing all bluetooth including the dongle. If someone has a way to turn off the internal bluetooth I want to see it.
Thanks

Can I DISABLE the OE internal Bluetooth and use a USB BT dongle?

I keep my Mac Pro in a server cabinet and the signal is too weak to reach my keyboard with the cabinet door closed.
Via SOFTWARE, is there any way to turn off the internal Bluetooth hardware so that only the USB Bluetooth dongle attachment is active?
I'd prefer not 'voiding my warranty' and would thus rather leave the guts of the machine alone.
Thanks in advance for a solution to this!
PS - Is there are recommended USB Bluetooth dongle I should be using?
I own two already:
- D-Link DBT-122 (this worked fine on my G5 Quad 2.5 - this was the apple-recommended unit once upon a time)
-Logitech USB Bluetooth 2.0 EDR dongle that came with my DiNovo Edge keyboard (this BT dongle has never worked for me).

Woops, my mistake: I MEANT to write DBT-120. That's what I've been using with the G5 (successfully).
So how do I use the dongle on a machine that has internal bluetooth?
When I plug in the DBT-120 to my USB, the BT stops working altogether. IOW the keyboard works a little buggy with the server closet door open (sometimes fine, other times buggy), but with the DBT-120 plugged in BT stops functioning altogether.
Help?

How do i use my Platronix bluetooth with iPhone 4 to listen to music.

How do i use my Platronix bluetooth with iPhone4 to listen to music.
Its a mono bluetooth paired with the phone.
I dont want to buy a new stereo headset but can i use this same one.

One way is to sync the contacts from the old iPhone to iCloud. Then when you turn on the new phone and set it up for iCloud and turn on the Contacts in Settings >iCloud, they will come to the new phone. http://www.apple.com/icloud/setup/

How do I use my apple bluetooth keyboard with touch and will I still be able to use it with my ipad?

How do I use my apple bluetooth keyboard with touch and will I still be able to use it with my ipad?

iPod touch User Guide (For iOS 4.3 Software)

How do I use a USB WiFi dongle with a MacBook?

I recently acquired a USB wifi dongle and downloaded the appropriate driver. When plugged into my MacBook it will connect to my Graphite Airport base station. I can even use Airport Admin Utility to change setting in the Graphite ABS with this USB dongle.
The driver software also included a 'client utility' which I use to get the dongle to function with the MacBook. It also required adding the dongle to the list of network [ports via the Network Preferences in OS X.
But I do not know how to use it to access the internet through the ABS. My ABS has a 56kbps dialup modem in it which I use with the MacBook's internal WiFi card as my way of accessing the internet normally. I would like to know how to use this new USB wifi dongle to do the same thing though.
TIA

If you noticed on my jpg of my settings the very top left window shows that the MacBook thinks the dongle is indeed connected to the internet. In actuality the dongle is only connected to the Graphite ABS.
My thinking is that the Graphite ABS (Apples first ABS) is simply set up to listen to Apple's own Airport card when it comes to the ABS' internal 56k modem. Maybe someone can tell me from experience that a Graphite will listen to a USB wifi dongle?
A bit of my personal philosophy... Apple stuff generally 'just works'. It does not require a lot of windoze-like 'jumping thru hoops' to make it work. So when it does not 'just work' I tend to think that it is because it can't.
Didn't try turning off the firewall, but if it requires that I would not want to use it anyway.
Yes, the ABS does distribute IPs, or at least something does because they are different from one time to the next.
Access Control is on, but again, I require that so it would have to work that way for me or it would have no value to me.
Again I will say, I certainly appreciate your help BDAqua. But I am starting to think we may be trying to do something that cannot be done unless you know otherwise?
Again, I would like to ask, is there is anyone using a Graphite ABS with any USB wifi card/dongle?

How to use the Bluetooth module natively in Parallels Desktop

link to the instructions on how to enable bluetooth natively in parallels:
http://www.mattiouz.com/blog/2007/04/13/how-to-use-the-built-in-mac-bluetooth-in -windows-under-parallels/
link to the .exe that installs the apple driver for the bluetooth module needed in parallels: http://www.mattiouz.com/download/AppleBluetoothInstaller.exe
now my bluetooth is accessible under parallels 3.0.5158. i scanned with a bluetooth netowrk scanner and i had no problems connecting to my treo 650.
i took my some time to find the info but @ last i found it;-)
Message was edited by: smokeonit

Hi,
You canr use text modules in script. You have to use standard texts .
Standard text are maintained in SO10 transaction.
you can create translation text for other languages also . So based on logon language it will print translation text.
go to SO10
give textname it say Ztextname id as ST and language as EN
say create, then you will get editor there maintain your text and save it . then come back . Now change language (say for german DE) say create and eneter translation text and save it.
so now you have created a text called ztextname which you can use in your script.
Inorder to insert the texts in your script do as below
go to any window editor and select path
Insert->texts->symbols->standard symbols
then you will get popup in which you have to mention all the parameters that you have created earlier.
after inserting just change language EN to sy-langu
Reward points if useful
About text elements Sravan already given some informatiomn
Regards,
Nageswar

How to use a REAL Bluetooth Dongle in WTK?

Similar Messages

Maybe you are looking for