How to use a second screen in proper full hd?

Hello everyone!
If i use my full hd monitor on my 2013 11 inch mba, even if i use the 1080p output settings it just doesn't looks like actual full hd.
Instead of seeing more, i just see exactly the same as on the screen of my mba – just blown up and blurry. ist there any way to fix this?

I think two things could be happening here:
1. DVI cable may be faulty - I am assuming you are using a DVI-D cable. You can check out the different types of DVI cables from here: http://en.wikipedia.org/wiki/Digital_Visual_Interface
or
2. DVI port on your computer is not working
I work on behalf of HP.

Similar Messages

How to use the second display for installation OS in my vertical lines iMac

My 17" iMac display is full of vertical lines, it is unuseable. Does anyone know how to use the second display for Mac OS X or disable the first display for installation Mac OS x ?

Go to: *System Preferences > Displays* and select the Arrangement tab, then relocate your Menu bar by dragging it to the other display.
Unfortunately there is no Hardware or Software switch to turn off the iMac's Internal Display.

How to use a second monitor in I movie 11

How can I use a second monitor in i movie. I could use it under preference in imovie 9, but in the new imovie 11 i can't find any advanced prefernces let alone how to use a second monitor

I too got the same. Both monitors went portrait. Then I unchecked the 'Mirror Display' option in the Arrangment tab of iMac display and voila. Got what I wanted.

How to use conditional success Screen in SMP2.3 HWC?

Hi All,
Do anybody have reference for conditional success screen,
I gone through this link SUP 2.2 Conditional Navigation Issue
but i didnt able to do how to use conditional success Screen.
If anybody have reference please provide me.
Regards,
Sravanya

That works. Follow the below steps.
1. Create a key on the selection screen: click on the selection screen>properties>keys>Add a key,ex. "value".
2. MenuItem>In the properties of menu item>Parameter mappings>map the key with the key created in last step.ie. "value" instead of the key of the choice box.
3. Get the value selected from choicebox:
function customValidateScreen(screenKey, values) {
if(screenKey === "Selection")
var form = document.forms[screenKey + "Form"];
if(form){
SelectionValue = form.ChoiceboxKey.value;
//ChoiceboxKey is the key of choicebox.
//Declare a global value "SelectionValue "
3. Map PK from program:
customBeforeSubmit = function(screenKey, actionName, dataMessageToSend) {
if(screenKey =="Selection" && actionName=="GoToChart" ){
var myNewValue2 = new MessageValue();
myNewValue2.setKey("Value");// Key created in the screen "Selection"
myNewValue2.setValue(""+SelectionValue );
myNewValue2.setType("TEXT");
var mvc = dataMessageToSend.getValues();
if( mvc ) {
mvc.add( myNewValue1.getKey(), myNewValue1 );
// So in the above way the data from choice box is send to online request.
To do the conditional navigation you have to use the global value created,ex.
hwc.customConditionalNavigation = function(currentScreenKey, actionKeyName, defaultNextScreen, conditionName, incomingDataMessage) {
if( conditionName === 'Data'&& SelectionValue == "PieChart") {
         return false;
     }else{
    return true;
Hope you understand how I did this.
Midhun VP

How to shrink Virtual PC screen size from full screen

How to shrink Virtual PC screen size from full screen?

Nobody out there has a solution to this?

Split funtionality - How to nevigate to second screen directly

HI,
I have a dropdown UI element which is in the first screen.From that dropdown,I can select either "Travel Expense" or "Non Travel Expense". Both these options are available in the dropdown in the first page.
So based on the selection,we can go to the respective application in the second screen.
Problem :- I have to make two separate links for these two application (Travel expense and Non Travel Expense),so that the user can direcly go to the respective application(direcly to the second screen) without going to the first screen and then go to the respective application.
Please suggest me how to do that.
Regards
-Sandip

Hi Sandip,
In portal, u might have created two different pages for ur web dynpro applications.
get the url of the page and navigate using WDPortalNavigation to respective page, when the user selects travel Expense or non travel expense.
refer this article for more information.
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40d983b4-bfc2-2b10-858f-b717e194f2c1]
if ur requirements does not satisfy with this solution then please elaborate ur query.
thanks and regards

How to use At Selection Screen for fields whiledealing with Multiple Blocks

Hi Guys,
            In my requirement i am having 4 blocks.1st block with raduio buttons for activating the opther 3 Blocks.
              In these 3 blocks i am having some fields.
       How to do Validation for these fields.?
I am using At Selection-screen on S-SCAD1. I am getting error"S_SCACD1 is neither a selection screen nor a Parameter"
On the top of this" At Selection-screen on S-SCAD1" I am having"AT SELECTION-SCREEN OUTPUT."
                Can anybody tell me how to solve this error?
Thanks,
Gopi.

If you are using your block name than you should use like:
AT SELECTION-SCREEN ON BLOCK S-SCAD1.
Regards,
Naimesh Patel

How to use my second hard drive on my desktop pro

I have a 12 core desktop pro with 2 HD's installed. How can I use my second hard drive independently? To use it as a second computer unto itself without all the
extra add on's I have on drive one.

how long ago did you ask this question?

How to use dynamic selection screen inputs in main program

hi all,
its a report where in it calls one dynamic selection screen( user need to enter the parameters here) after that i need to use those inputs for some check, can any buddy help how to use/ get that input parameters into main program.
regards,
vara..

Hi,
i think u have created that dynamic selection screen in seperate program and calling to ur main program.instead of that u just create that synamic selection screen program as include program and include it in ur main program.
or u need to use set/get parameter id concept.
rgds,
bharat.

How to use a second laptop with my old router

Hello, I'm trying to use a second laptop with my old router (model BEFW11S4 v.2) for a work project. I've tried two diff computers and neither will connect, each giving different error messages. The work laptop I have right now will hook up to an unsecured network and will ask me for a network key for other detected secured networks, but tells me to refresh and search for networks again when I try to hook up to my network. My personal laptop hooks up to the internet just fine. Help! Mo

Please go to the wireless tab for all the information you need. Click the link below for instructions. Let us know how it goes.
Checking the Wireless Settings on a Linksys Router
Connecting a Wireless Computer to go Online Using a Linksys Router

How to Use My TV screen as a Computer Screen

Hi everyone,
I have a 24" Intel IMAC, 1 year old. Great computer! I saw in some other posts that this is possible but I didn't quite understand what I need to do. I would like to use my TV screen as a computer screen, so I can watch things like my subscription to MLB.TV or any other video that I can play on my IMAC. I saw in some posts about using an Apple Video Adapter. Please be specific for me, is that what connects from the back of my IMAC? If so which slot? And going out from the computer, what does that connect to? What should I buy? And from there I can use a composite cables to connect to my TV? Yes, I have inputs for those on the TV.
Thanks in advance to anyone who helps.
Bill

Your TV based on the jacks present (which are the same as ports), sound like quite an antique. Modern TVs have special jacks for computer hookup. Sounds like your TV has none. The best you'd hope to achieve is 720 x 480 resolution which would result in very little room for the windows on your screen, and very large text on your TV. Trying to even get the menubar and dock on the screen will be a challenge since TVs that only offer 720 x 480 resolution don't offer any screen area beyond the screen safe area for the menubar and Dock to be visible. It will just center on the screen's center, cutting off 20% of the exterior four sides. Ideally you'd want a 1080P HD-TV for computer hookup.

How to use tv as screen

I conected a cable with a hdmi adapter to the mac and an hdmi cable to the tv
i can see the video playing on the mac but the tv screen shows the universe`s image from the mac without session.
how i can send the video image or movie to the tv
thankx
marion

You have the display set in Extended Desktop mode. In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Justclick on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen. You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse. http://support.apple.com/kb/HT3131 When you disconnect from the TV your Menu Bar will automatically change back to the MacBook.
Or if you want to work on the MacBook screen while showing it on a TV you can check the Mirror Display box on the lower left hand side of the Arrangement tab under the two monitors box.

How do I change second screen

Is there a way to have the second frame different from the start frame. At the moment start frame and second are the same. If I delete second frame then all the frames move backwards and I still get start frame and second frame the same - confused......

Hello,
The start frame (S) uses the screen from the first action frame or explanation frame, (F) or (X) respectively, as the background. After a quick test, here is something that seems to accomplish the request:
1. Copy the first action frame (F) after the start frame (S).
2. Select the start frame and paste the frame from your clipboard. You should now have two identical frames after your start frame.
3. On the first of the two identical frames, edit the screenshot to be what you would like to show on the start frame, keeping in mind it will have a grayscale effect added to it.
4. On the same frame, deselect all three checkboxes in the "Show In" property below the bubble editor.
Your start screen will now use the edited screenshot from the first frame while the first action frame screenshot will remain unchanged. Hope this helps.
If you have ideas on how to improve this behavior, please submit an enhancement request through My Oracle Support. Additional information can be found in the announcement at the top of this forum: https://forums.oracle.com/forums/ann.jspa?annID=1175
Best regards,
Marc

How to use a second computer just to listen to iPod?

I want to use my computer at work to listen to the music on my Nano, not to manage it. My personal laptop is the Nano's "home" computer. I have iTunes installed on my work computer, but I don't want to transfer my Nano contents to that computer. I just want to use the work computer as a pass-though device to its speakers so I can listen to the music on iPod at the office. Is this possible?
When the Nano is plugged into the computer, I can't see what's stored on the Nano, but the songs will play--in alphabetical order only. Since I can't "see" what's on the Nano via the computer (and Nano's own screen goes to "Do Not Disconnect" when plugged in), I can only scroll through songs blindly using the "next" control in iTunes.
Is there a way to see my playlists and all Nano contents via the computer, without transferring anything to the computer itself? The IT guys will smack me silly if I have a music library on the work computer. I can't afford to buy a separate audio device (i.e., Bose speaker dock, etc.), and since my computer already has great speakers, it would seem redundant to buy a stand-alone speaker thingy just for the iPod.
Am I asking for the impossible?

You have two choices: First, install iTunes on the
computer at work. Then set your iPod to manually
manage and connect it to the computer. It will show
up in iTunes and you'll be able to play the songs
that are on the iPod.
iTunes was installed first, well, second after I saw that WMP wouldn't work with the iPod. I selected "Manually manage," but that doesn't solve the problem. When in iTunes, the Nano shows up as a device over on the left side of the screen, but no matter where I click or what I try, it won't show me the contents of the Nano. If I click on the "play" button in iTunes, the music plays, but as I said earlier, songs are in ABC order. I have to just keep clicking the forward button to get to a song I want. I have over 3 gigs of music loaded on the Nano--that's a lot of blind scrolling!
Second, buy a pair of speakers
for the iPod.
See my first post. No money!

How to use 'at selection screen on exit command'

Hi,
How do I use the above event in the following scenario.
Scenario: I have a report program which has two radio buttons on the selection screen to which user command is assigned. On selection one, some fields should get disappeared on the selection screen. But one of the fields is a mandatory field, which doesn't allow to proceed unless we enter some value in that(which is redundant since anyway it will be disappearing).
I thought 'on exit command' event works, but the user command assigned to the radio button is not of type E.
Issuing a message at selection screen instead of making the field mandatory will work, but I don't want to do that.
Can anyone please tell me how to handle this?
Incorrect answers will be suitably punished.
Thanks,
Sumanth
Edited by: Julius Bussche on Sep 26, 2009 12:40 PM
Silly comment suitably modified.

do not make that field mandatory using obligatory. so now your radio button work is done.
now, how to make the field look like and work like mandatory field on execution:
at selection-screen output.
loop at screen.
   if screen-name = 'P_MAN'. " lets say this is the field which you want to make mandatory.
      screen-required = 2. "this will just put a tick mark on the input , looks like mandatory.
   endif.
endloop.
now, how to check the mandatory option.
at selection-screen.
if p_man is initial.
display your message to fill this.
endif.
hope this helps...
and as per forum rules, kindly do not encourage people by talking about forum rules.

How to use a second screen in proper full hd?

Similar Messages

Maybe you are looking for