How to use a table to fill an array

I have a cFP 2110 with a couple of relay modules I'm using to automate a process. I'm using an array of a cluster of elements to turn the relays on and off with a time delay for each step. This was the first version I started with and I have since built a state machine around. What I would like to do is add a table or array to the front pannel and move the relay control and time delay to the front panel and allow the user to specify which relays are on or off and for how long. I also want to allow the user to save the table and have the option to select other saved versions of the table to operate the module with different. I also need to add a string control to the table so I will need to use shared variables for to communicate between the target Vi and the host vi the user is working from. Is a table the correct approach to do this? I have never used the table functions. How do I go about building a table and sending the data to an array? Do I need to send the table contents to file OI first, then have the array read the specified file?
Thank for the help.
Danny
Attachments:
array.vi ‏40 KB

Hi Danny,
Instead of using a constant array on your block diagram, you could use a control array so that the elements show up on the front panel. Then your user will have the ability to change the relays and time delay. You can then use Datalog files (see Help >> Find Examples... and search Datalog) to save individual clusters. Otherwise if you want to save entire arrays, you could just save them to a binary file.
Using the array of controls eliminates the need for a table and its conversion, and also provides a front panel interface for your user to control. Does the string control need to be part of these array as well, or can it be separate?
If you are reading a file back to be used with your program, you will need to read the file to get its contents before using it to control your loop.
Will
Certified LabVIEW Architect, Certified Professional Instructor
Choose Movement Consulting
choose-mc.com

Similar Messages

How to use the table maintenance events for validating the input entries..?

Hi,
I have created a Z table with 6 fields in which all are KEY fields. All are of CHAR type. I have created the Table Maintenance Generator for the same. While maintaining the entries in the table, even though I maintain a blank entry for a field it is saving the entry. But, I don't want that way. All the fields are mandatory in my table. One should enter all the fields. Otherwise it should not allow to save the entry. So, I think it can be done using the Table Maintenance Events. can someone tell me how to use the Table Maintenance Events. and which event to use for my reuqirement and what is the logic to be written.
Or Is there any other way to solve my problem.
Please share your inputs. Thanks in advance.
Best regards,
paddu.

In the table maintenance generator, Environment --> Modifications --> Events then a screen will be appear here,we need to create the Events.In the EVENTS screen, press new Entries, there give 01(Before Saving the Data in the Database) and give a name(This will become a PERFORM), then click the Editor pushbutton, this will be there at the right side of the entry, then a popup will be appear, you can create an include program, there inside of the include program write ur code.
Here is documentation for Event 01(Before Saving the Data in the Database )
Event 01: Before Saving the Data in the Database
Use
This event occurs before new, changed or deleted entries are written to the database. Other activities can be performed, for example:
hidden entry processing
fill hidden fields
flag data to be written to hidden tables after the database change.
To have the changes saved by the central maintenance dialog routines, SY-SUBRC must be set to 0 at the end of the routine.
Realization
This event has no standard routine. The following global data is available for the realization of the user routine:
internal table TOTAL
field symbols
field symbols <ACTION> and <ACTION_TEXT>
<STATUS>-UPD_FLAG
If internal table data are to be changed before saving, t he changes should be made in both the internal table TOTAL and in the internal table EXTRACT.
FORM abc.
DATA: F_INDEX LIKE SY-TABIX. "Index to note the lines found
LOOP AT TOTAL.
IF <ACTION> = desired constant.
READ TABLE EXTRACT WITH KEY <vim_xtotal_key>.
IF SY-SUBRC EQ 0.
F_INDEX = SY-TABIX.
ELSE.
CLEAR F_INDX.
ENDIF.
(make desired changes to the line TOTAL)
MODIFY TOTAL.
CHECK F_INDX GT 0.
EXTRACT = TOTAL.
MODIFY EXTRACT INDEX F_INDX.
ENDIF.
ENDLOOP.
SY-SUBRC = 0.
ENDFORM.
Regards,
Joy.

How to Use a table UI for input ?

Hi All ,
I just want to ask how to use a Table UI in webdynpro ABAP to insert , change and delete rows ?? and can we give a drop down facility in table columns ? . This is really urgent .
Thanks in advance.
Regards,
LAS

Hi LAS,
Everything is possible. I am providing the logic here which will help you a lot.
For insert, Change, Delete:
   Just get the all the elements into temp internal table and get the lead slected index. Now instrt one row in the lead selected index position. then again bind the temporary internal table to your table node. Thats all it works like inserting the row.
In the same way you can do the change and delete rows also.
For Dropdown:
Here i am providing the code for Dropdown. It will help you out.
Just create the Dropdown view for the columns for which you want dropdown. And do the coding for that.
Here in my scenario IT is the Table node which holds the information. And i am providing the dorpdown key for the column "BSCHL".
If you have any dobts just reply to me . i will respond it.
Code:
data : ls_outtab               type /kyk/s_fb01_line,
         lt_outtab               type table of /kyk/s_fb01_line,
         lv_node_sd              type ref to if_wd_context_node,
         lv_node_it              type ref to if_wd_context_node,
         lv_node_info            type ref to if_wd_context_node_info,
         lv_node_sapmf05a_0106   type ref to if_wd_context_node,
         lv_node_waers           type ref to if_wd_context_node,
         lv_node_layout          type ref to if_wd_context_node,
         lv_rowcount             type i,
         lv_buzei                type i,
         lv_waers        type waers,
         lt_bschl_set    type wdy_key_value_table,
         bschl_key_item type wdy_key_value.
bind to context
lv_node_sd      = wd_context->get_child_node( name = 'SD' ).
lv_node_it      = lv_node_sd->get_child_node( name = 'IT' ).
call method lv_node_it->bind_table
    EXPORTING
      new_items = lt_outtab.
fill Dropdown Help for posting Key
bschl_key_item-key    = '40'.
bschl_key_item-value = cl_wd_utilities=>get_otr_text_by_alias( '/KYK/FIN_FI/DEBIT_GL_ACCOUNT' ).
insert bschl_key_item into table lt_bschl_set.
bschl_key_item-key    = '50'.
bschl_key_item-value = cl_wd_utilities=>get_otr_text_by_alias( '/KYK/FIN_FI/CREDIT_GL_ACCOUNT' ).
insert bschl_key_item into table lt_bschl_set.
bschl_key_item-key    = '21'.
bschl_key_item-value = cl_wd_utilities=>get_otr_text_by_alias( '/KYK/FIN_FI/DEBITVENDOR' ).
insert bschl_key_item into table lt_bschl_set.
bschl_key_item-key    = '31'.
bschl_key_item-value = cl_wd_utilities=>get_otr_text_by_alias( '/KYK/FIN_FI/CREDITVENDOR' ).
insert bschl_key_item into table lt_bschl_set.
lv_node_info = lv_node_it->get_node_info( ).
lv_node_info->set_attribute_value_set( name = 'BSCHL' value_set = lt_bschl_set ).
Warm Regards,
Vijay

How to use multiple table in single control file?

Hi,
How to use multiple table and data file in sigle control file? I have a four table and four csv file i mean data file for that. I am running concurrent program to load the data from csv file to custom table. based on my input data file name, it has to take automatically from one control file.
Can anyone share with me how can i acheive this?
Thanks

Hi,
Can't we acehive like below. I don't this exactly corrcect.
OPTIONS (SKIP=1)
LOAD DATA
INFILE << file name 1 >>
APPEND INTO TABLE XXCZ_VA_SAMPLE1
FIELDS TERMINATED BY "," OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
PARENT_ITEM "TRIM(BOTH FROM :PARENT_ITEM)"
LOAD DATA
INFILE << file name 2 >>
APPEND INTO TABLE XXCZ_VA_SAMPLE2
FIELDS TERMINATED BY "," OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
ITEM_NUMBER "TRIM(BOTH FROM :ITEM_NUMBER)"
)Edited by: orasuriya on Sep 14, 2009 3:03 AM

How to use Temporary Table in PL-SQL

In MySQL there is no Temporary table concept.
So for intermediate calculation I have created a table as below
create table SequenceTempTable
SessionId VARCHAR(50),
Sequence VARCHAR(500),
CreatedDate DATE
) ENGINE=MEMORY;
Whenever I invoke a SP, I load the data into SequenceTempTable using Session Id as below
CREATE PROCEDURE `GetSequence`(
IN Start_Date VARCHAR(25),
IN End_Date VARCHAR(25)
BEGIN
SELECT UUID() INTO v_SessionId;
INSERT INTO SequenceTempTable values (v_SessionId,'1,2,5,3',now());
required code
DELETE FROM SequenceTempTable WHERE SessionId = v_SessionId;
COMMIT;
END;
i.e. I have created a table as temporary table (created once),
and load the data using Session Id and once session specific intermediate computation done,
I deleted the session specific data.
Could you give me examples of How to use Temporary table in PL-SQL code with respect to my above example.
Because I have gone through creating Temporary table but I stuck with use in PL-SQL. I mean to say Is there any need of creating table in advance before invoking SP.
And one more thing as in MySQL temp table I created which is using MEMORY engine i.e. this table will always be in MEMORY so there is no need of writing data on disk.
Regards
Sanjeev

Hi Sanjeev
Read about GTT here
http://www.oracle-base.com/articles/8i/TemporaryTables.php
GTT always contains just session specific data. \
In case you want to use the GTT in the same session again you can use option
ON COMMIT PRESERVE ROWS;
Or if it is used just once in the session use can use
ON COMMIT DELETE ROWS;
Do remember that for GTT the data of one session can not be accessed in other session.
Also you can go away with Delete from GTT if not used again in same session.
Regards
Arun

How to use error table in mapping level?

Hi all
Any one please tell me how to use error table in mapping level or how to handle the errors in mapping.
I am creating one error table in oracle but i dont know how to use it in mapping.
Thanks in advance.
Kumar

Hi Kumar,
You need to use Error Table along with the Data Rule .
Error tables are used with Logical error handlers (Data Rules). Detailed description on using data rules is explained in the following document
http://www.oracle.com/technology/products/warehouse/pdf/OWB10gR2_ETLandBusinessRules.pdf
In a nut shell usage of error tables is as follows.
1. Create a data rule associate it with a table (Target table or table in which you load data).
2. Use the table in a mapping as target table.
3. Deploy the table and mapping.
Now in the target schema one more table will be created with the name <target table name>_ERR. When a mapping is executed the data which violates the data rule gets into this error table.
The following has to be done to have error table name of customers choice.
1. Right click on the table and click configure.
2. Give the table name in "shadow table name" section.
3. Deploy the table.
4. Use this table in a mapping. Now in the mapping on this table properties in "Error Table Name" section the name of the table specified in "shadow table name" will be populated.
Thanks,
Sutirtha

How to use dual table in ODI in source side for nested queries?

Hi,
Any idea how to use dual table in source for more than once. I want to build a ODI interface for the following source query
SELECT ACTV_TYP.ACTV_TYP_SRC_CD, ACTV_TYP.ACTV_TYP, PORT_ACTV_TYP.PORT_ACTV_TYP_SRC_CD, PORT_ACTV_TYP.PORT_ACTV_TYP, SFT_DLT_STS.SFT_DLT_STS_SRC_CD, SFT_DLT_STS.SFT_DLT_STS
FROM
SELECT LOW_VALUE PORT_ACTV_TYP_SRC_CD, MEANING PORT_ACTV_TYP
FROM CUSTOMS.DOMAIN_ALLOW_COLUMNS_VALUES
WHERE TABLE_NAME = 'BRKR_PORTS'
AND COLUMN_NAME = 'WORK_PORT_TYPE') PORT_ACTV_TYP,
(SELECT LOW_VALUE SFT_DLT_STS_SRC_CD, MEANING SFT_DLT_STS
FROM CUSTOMS.DOMAIN_ALLOW_COLUMNS_VALUES
WHERE TABLE_NAME = 'BANKS'
AND COLUMN_NAME = 'REC_STATUS') SFT_DLT_STS,
(SELECT 1 ACTV_TYP_SRC_CD, '?????' ACTV_TYP FROM DUAL
UNION ALL
SELECT 2 ACTV_TYP_SRC_CD, '???????' ACTV_TYP FROM DUAL) ACTV_TYP
Regards

If the below query is equivalent , it seems you don't need dual table at all , just default the values in the interface.
You are using dual tables to populate values ACTV_TYP.ACTV_TYP_SRC_CD, ACTV_TYP.ACTV_TYP values. Look at your query in the following manner :
SELECT '1', '?????', PORT_ACTV_TYP.PORT_ACTV_TYP_SRC_CD, PORT_ACTV_TYP.PORT_ACTV_TYP, SFT_DLT_STS.SFT_DLT_STS_SRC_CD, SFT_DLT_STS.SFT_DLT_STS
FROM
SELECT LOW_VALUE PORT_ACTV_TYP_SRC_CD, MEANING PORT_ACTV_TYP
FROM CUSTOMS.DOMAIN_ALLOW_COLUMNS_VALUES
WHERE TABLE_NAME = 'BRKR_PORTS'
AND COLUMN_NAME = 'WORK_PORT_TYPE') PORT_ACTV_TYP,
(SELECT LOW_VALUE SFT_DLT_STS_SRC_CD, MEANING SFT_DLT_STS
FROM CUSTOMS.DOMAIN_ALLOW_COLUMNS_VALUES
WHERE TABLE_NAME = 'BANKS'
AND COLUMN_NAME = 'REC_STATUS') SFT_DLT_STS
UNION
SELECT 2 , '??????', PORT_ACTV_TYP.PORT_ACTV_TYP_SRC_CD, PORT_ACTV_TYP.PORT_ACTV_TYP, SFT_DLT_STS.SFT_DLT_STS_SRC_CD, SFT_DLT_STS.SFT_DLT_STS
FROM
SELECT LOW_VALUE PORT_ACTV_TYP_SRC_CD, MEANING PORT_ACTV_TYP
FROM CUSTOMS.DOMAIN_ALLOW_COLUMNS_VALUES
WHERE TABLE_NAME = 'BRKR_PORTS'
AND COLUMN_NAME = 'WORK_PORT_TYPE') PORT_ACTV_TYP,
(SELECT LOW_VALUE SFT_DLT_STS_SRC_CD, MEANING SFT_DLT_STS
FROM CUSTOMS.DOMAIN_ALLOW_COLUMNS_VALUES
WHERE TABLE_NAME = 'BANKS'
AND COLUMN_NAME = 'REC_STATUS') SFT_DLT_STS
Now you can use dataset to make UNION.

How to use temporarly table wid record type

Hi,
how to use temporarly table wid the record type wid this example
declare
type empcurtyp is ref cursor;
type rectype is record (veid t.emp_id%type, vename t.ename%type);
TYPE tabtype IS TABLE OF rectype;
empcv empcurtyp;
vtab tabtype;
begin
open empcv for select emp_id,ename from t;
loop
fetch empcv into vtab;
exit when empcv%notfound;
dbms_output.put_line(vtab.vename||vtab.veid);
end loop;
close empcv;
end;
here we hav table t and i m taking only two fields of the table t which r emp_id and ename.

Try this
declare
type rectype is record (veid t.emp_id%type, vename t.ename%type);
type empcurtyp is ref cursor return rectype;
TYPE tabtype IS TABLE OF rectype;
empcv empcurtyp;
vtab empcv%rowtype;
begin
open empcv for select emp_id,ename from t;
loop
fetch empcv into vtab;
exit when empcv%notfound;
dbms_output.put_line(vtab.vename||vtab.veid);
end loop;
close empcv;
end;

How to use XREF table in BPEL?

Can anyone tell me how to use XREF table in BPEL ??

It is used to build up an XML fragment to the element on the target side...
please refer this link....
http://kr.forums.oracle.com/forums/thread.jspa?threadID=2252997&tstart=2
Thanks,
N

How to use External Tables

Hi, I want to know how to use external tables? The procedure i follow for SQL*Loader in my shell script is:
Call the sqlldr
Check return code
If return code = 2. get count of records from bad file and exit.
If return code != 0 and != 2 then exit as fatal error
If return code = 0 then continue.
But i don't understand how to use external table as it is not invoked and does not have a return code.

Hello,
What do you mean alogrithim, do you mean to invoke external table as you invoke sqlldr? You can generate external table script from sqlldr and use it to load data but you might have to modify the table name and datafile name . You can see if any bad file generated from sqlldr and if yes then you can generate external table (using sqlldr) or based on your bad file. May be if you can list what exactly you want in bullet points, then it will be easier to suggest you.
Regards

How to use a Table View in AppleScriptObjC

How can I use a table view and add data to it? And how can I display a button cell and image cell in the table? Thanks.

Hi all,
Actually i need some more clarification. How to use the same select statement, if i've to use the tabname in the where clause too?
for ex : select * from (tab_name) where....?
Can we do inner join on such select statements? If so how?
Thanks & Regards,
Mallik.

How to use the Table Function defined in package in OWB?

Hi,
I defined a table function in a package. I am trying to use that in owb using Table function operator. But I came to know that, owb R1 supports only standalone table functions.
Is there any other way to use the table function defined in a package. As like we create synonyms for functions, is there any other way to do this.
I tryed to create synonyms, it is created. But it is showing compilation error. Finally I found that, we can't create synonyms for functions which are defined in packages.
Any one can explain it, how to resolve this problem.
Thank you,
Regards
Gowtham Sen.

Hi Marcos,
Thank you for reply.
OWB R1 supports stand alone table functions. Here what I mean is, the table fucntion which is not inculded in any package is a stand alone table function.
for example say sample_tbl_fn is a table function. It is defined as a function.It is a stand alone function. We call this fucntion as "samp_tbl_fn()";
For exampe say sample_pkg is a package. say a function is defined in a package.
then we call that function as sample_pkg.functionname(); This is not a stand alone function.
I hope you understand it.
owb supports stand alone functions.
Here I would like to know, is there any other way to use the functions which are defined in package. While I am trying to use those functions (which are defined in package -- giving the name as packagename.functionname) it is throwing an error "Invalid object name."
Here I would like know, is there any other way to use the table functions which are defined in a package.
Thank you,
Regards,
Gowtham Sen.

How to use the Table Valueset in another Table Valuset

Hi Friends ,
I have one requirement let me explain you the scenario.
in one segment of the Keyflex filed i need to get the all the grades of the business. which i did using the table valueset.
now in another segment of the kff, i need to get all the grade steps depending on the selected grade.
like if i have a grades say G1,G2,G3,G4...........
and grade steps
for G1-steps(1,2,3,4,5,6)
for G2-steps(1,2,3,4)
for G3-steps(1,2,3)
for G4-(1,2,)
etc.
Now my requirement is if the user select the grade G1 from the valueset. then in the next filed of the segment should come only those steps which are valid for that grade.
i hope i have given clear pic of my requirement can anyone please help me out, how to proceed for this.
thanks in advance.

Well, I know what you're talking about, but this is something that is usually done in different ways depending on the front end interface being used.
Are you referring to Oracle Forms? Apex? .NET? Java? or what???
This forum is for SQL and PL/SQL questions, so doesn't relate to a particular interface. SQL and PL/SQL do not have key flex fields, so, either ask your question in the correct sub-forum or give us more details as to your requirements.

How to use tree tables with CRUD operation for begineers ADF 11g

This is Friday night call for help.
This is only few sample ressources on the web for tree table and only one with CRUD operation.
I used this one http://jobinesh.blogspot.com/2010/05/crud-operations-on-tree-table.html because this is the only one that address CRUD.
And it is shaky. Deletion works fine but insertion not very well. This is working using custom code provided below.
Depending if the user selection in the tree, the code insert from the master node to the children node.
Any other options because it is not working well.
Also where Oracle describes how to use the row, rowset, itorator API? This is really hard to understand like almost if we should not use it.
then if not how can I insert in tree with two nodes and insert in the parent or children depending the users selection.
Lately I 'been posting questions on this forum with no response. This hurts. I understand developers cannot spend their time on this but People from Oracle, please help. We pay licenses...
public void createChildren(RowIterator ri, Key selectedNodeKey) {
final String deptViewDefName = "model.DepartmentsView";
final String empViewDefName = "model.EmployeesView";
if (ri != null && selectedNodeKey != null) {
Row last = ri.last();
Key lastRowKey = last.getKey();
// if the select row is not the last row in the row iterator...
Row[] found = ri.findByKey(selectedNodeKey, 1);
if (found != null && found.length == 1) {
Row foundRow = found[0];
String nodeDefname =
foundRow.getStructureDef().getDefFullName();
if (nodeDefname.equals(deptViewDefName)) {
RowSet parents =
(RowSet)foundRow.getAttribute("EmployeesView");
Row childrow = parents.createRow();
parents.insertRow(childrow);
} else {
RowSet parents =
(RowSet)foundRow.getAttribute("EmployeesView");
Row childrow = parents.createRow();
childrow.setAttribute("DepartmentId",
foundRow.getAttribute("DepartmentId"));
parents.insertRow(childrow);
} else {
System.out.println("Node not Found for " + selectedNodeKey);
}

I am looking for a sample that describe how to design a jsf page with a tree table.
So you have Department and employees. In the tree first comes Department and if you click the node you see the employees assigned to this department.
I need to be able to insert a new department or a new employee from the tree table by clicking on a insert button in the panel collection toolbar depending on user selection in the tree.
I got part of it working but not good enough.
By problem is the get insertion working
I have a createChildren method in my AM implementation that get in input a RowIterator and selected node key.
To goal is to create new records depending of the user selection and the input parameters get populated by the binding like this:
#{backing_treeSampleBean.selectedNodeRowIterator} #{backing_TreeSampleBean.selectedNodeRowkey} via method binding with parameters.
Is it the right approach?
First to be able to insert a parent record, I select nothing in the tree and ri and selectedNodeKey comes to null
we run this code
ViewObjectImpl vo = getSchHolidaySchedExceptionsView1();
//ViewObjectImpl vo = getDepartmentsView1();
Row foundRow = vo.first();
Row childrow = vo.createRow();
vo.insertRow(childrow);
A new blank entry appears in the parent node and we enter a value.
The the problem starts when we want to add a child to this parent.
We select the created parent and press the insert button, this code get executed
if (nodeDefname.equals(deptViewDefName))
//list of the children of the parent and create an new row
RowSet childRows = (RowSet)foundRow.getAttribute("SchHolidayExceptionDatesView");
Row childrow = childRows.createRow();
childRows.insertRow(childrow);
But the new entry does not appear, it is almost like it would be created for a different parent because this is a mandatory field that is not feel in yet and the interface complaints of a missing value. It is created somewhere just not a the right place... This is my guess.
Do you see something wrong with the code?
The full code og my create children method is there below
I am using jdeveloper 11.1.1.3.0 any issues with tree table to know about with this version?
Thanks for your help
public void createChildren(RowIterator ri, Key selectedNodeKey) {
final String deptViewDefName = "com.bcferries.app.pdfroutesched.model.SchHolidaySchedExceptionsView";
final String empViewDefName = "com.bcferries.app.pdfroutesched.model.SchHolidayExceptionDatesView";
if (ri != null && selectedNodeKey != null) {
// last row
Row last = ri.last();
Key lastRowKey = last.getKey();
// if the select row is not the last row in the row iterator...
Row[] found = ri.findByKey(selectedNodeKey, 1);
if (found != null && found.length == 1) {
// foundRow is the row selected
Row foundRow = found[0];
// The row selected can be the parent node or the child node
String nodeDefname = foundRow.getStructureDef().getDefFullName();
// if parent row
if (nodeDefname.equals(deptViewDefName))
//list of the children of the parent and create an new row
//works but we try to resolve the creation of a parent
RowSet childRows = (RowSet)foundRow.getAttribute("SchHolidayExceptionDatesView");
Row childrow = childRows.createRow();
//childrow.setAttribute("HolidayDate", new java.util.Date().getDate());
System.out.println("insert child row from master");
childRows.insertRow(childrow);
} else
//RowSet ParentRow = (RowSet)foundRow.getAttribute("SchHolidaySchedExceptionsView");
//RowSet childRows = (RowSet)ParentRow.first().getAttribute("SchHolidayExceptionDatesView");
Row childrow = ri.createRow();
System.out.println("insert child row from child ");
} else {
System.out.println("Node not Found for " + selectedNodeKey);
} else {
System.out.println(" param null try creating for first row : " +
ri + " * " + selectedNodeKey);
ViewObjectImpl vo = getSchHolidaySchedExceptionsView1();
Row foundRow = vo.first();
Row childrow = vo.createRow();
vo.insertRow(childrow);
}

How to use multiple tables in developing one Graph in Endeca Integrator

We have the requirement where we want to show the matrix for a particular entity which is coming from two separate table, there is a join which is possible on both the tables to get the correct data. But we are not able to find how to use data from two tables. We can create the SQL query with all the joining conditions but there are many tables which are involved so performance of query will be a problem. Is there any way in Endeca where I can create two data sources using two separate queries and while showing the matrix , I can join both the tables to get the matrix .

You have not mentioned the version of Endeca that is used for your application. Joins are recently introduced in version 2.3 and could be used for avoiding complex DEFINE analytical statements. For this to work, the data should be present in the same dgraph and a single data source in Studio should point to data from both sources.
These may not yet be the type of SQL joins that you may expect them to be as performing complex joins is also costly in Endeca. Hope you are not expecting to join huge data sets.
The best possible solution I could think for addressing this problem is to load denormalized data (at least for now) into Endeca and do aggregations in queries. We can denormalize data in multiple ways even using ETL tools not just SQL queries as the above comment states.

How to use a table to fill an array

Similar Messages

Maybe you are looking for